Influence of nanodispersed hydrotalcite on polypropylene photooxidation

Nanocomposites containing hydrotalcite and prepared by melt compounding with polypropylene were UV-light irradiated in artificial accelerated conditions representative of solar irradiation (λ > 300 nm) at 60 °C in air. The chemical modifications resulting from photooxidation were followed by IR and UV-visible spectroscopies.The presence of hydrotalcite was shown to change the global rate of photooxidation of polypropylene by reducing the oxidation induction time and increasing the oxidation rate. The differences of the oxidation induction time disappeared after solvent extraction of the antioxidant. They were attributed to a quenching of the antioxidant activity resulting from a migration onto the filler surface induced by the preferential interaction with the polar hydrotalcite. Extracting the antioxidant did not change the oxidation rate at the permanent regime. The increase of the oxidation rate was attributed to transition metal ions, present as impurities in hydrotalcite, which can accelerate the oxidation of the polymer by various mechanisms including a catalysed decomposition of hydroperoxides.     

Photooxidation of vulcanized EPDM/montmorillonite nanocomposites

The photooxidation of a vulcanized ethylene-propylene-diene monomer (EPDM)/montmorillonite nanocomposite as well as EPDM/nanocomposite with stabilizers was studied under accelerated UV-light irradiation (λ ≥ 300 nm, 60 °C) for different times. The development of functional groups during oxidation was monitored by infrared spectroscopy. Photodegradation of the neat polymer and composites took place and the increases of absorbance in hydroxyl and carbonyl groups with irradiation times and also the decreases of the EPDM unsaturations were measured. The data indicated that the photooxidation products were not changed in the presence of the nanofiller. However, the presence of MMt was observed to dramatically enhance the rate of photooxidation of EPDM with a shortening of the oxidation induction time, leading to a decrease of the durability of the nanocomposites. On the other hand, it was observed that addition of stabilizers, either Tinuvin P or 2-mercaptobenzimidazole, was efficient in inhibiting the degradative effect of MMt.     

Thermo-oxidative stability of polypropylene/layered silicate nanocomposites

Several series of experiments were carried out to check the effect of components on the stability of PP/layered silicate nanocomposites. The amount of organophilic montmorillonite (OMMT) changed between 0 and 6, while that of maleated polypropylene (MAPP) between 0 and 50 vol%. The composites were prepared in an internal mixer at 190 °C. Mixing speed and time were changed to study the effect of processing conditions on stability. The structure of the samples was characterised by various methods, while stability by the induction time of oxidation (OIT), the onset temperature of degradation (OOT) and by colour. Contrary to numerous claims published in the literature, which indicate the positive effect of layered silicates on the stability of polymer nanocomposites, our results clearly proved that both OMMT and MAPP accelerate degradation during processing and deteriorate the properties of PP composites. Residual stability decreases drastically with increasing amounts of both components, chain scission leads to the decrease of viscosity and to inferior strength and deformability. In spite of expectations, the effect of the components is independent of each other. Discoloration is caused mainly by the inherent colour of the filler and it decreases with increasing exfoliation. The most probable reason for decreased stability is the reaction of the components with the stabilisers, but this explanation needs further verification. Processing conditions influence degradation considerably, increasing shear rate and longer residence times lead to more pronounced degradation. The basic stabilization of commercial grade polypropylenes is insufficient to protect the polymer against degradation and without additional stabilization processing under normal conditions results in products with inferior quality.     

Morphology and fracture behaviour of polyethylene/Mg-Al layered double hydroxide (LDH) nanocomposites

Fracture behaviour of polyethylene (PE)/Mg-Al layered double hydroxide (LDH) based nanocomposites has been studied by essential work of fracture (EWF) approach. Transmission electron microscopy (TEM and X-ray diffraction (XRD) analysis have been used to investigate the morphological features of these nanocomposites. A maximum in the non-essential work of fracture was observed at 5 wt.% LDH demonstrating enhanced resistance to crack propagation compared to pure PE. Morphological analyses of the nanocomposites show that the dispersed LDH platelets are partially exfoliated and also forms clusters with polymer chains remaining entrapped within. Rheological analyses show that the typical low-frequency Newtonian flow behaviour, as observed in unfilled polymer, shifts to shear-thinning behaviour with increasing LDH concentration. At 5 wt.% LDH a ductile-to-brittle transition has been observed. Fracture surface investigation by SEM reveals the arresting of the plastic crack growth by the LDH particle clusters, which is more significant at 5 wt.% LDH content. At higher LDH concentrations, the number of such particle clusters increases causing decrease in the average distance between them. As a result large-scale plastic deformation of the matrix at higher LDH concentration is effectively arrested favouring small strain failure and this in turn reaffirms the possible existence of a ductile-to-brittle transition. The study in general reveals that the resistance against crack initiation (essential work of fracture: EWF) and crack propagation (non-essential work of fracture: βw_p) in these nanocomposites are structurally correlated with the matrix behaviour and the morphology (state of LDH particle dispersion) respectively.     

Influence of nanodispersed boehmite on polypropylene photooxidation

Nanocomposites containing pure or organically modified nanoboehmites of different sizes were prepared by melt compounding with polypropylene. The samples were UV light irradiated in artificial accelerated conditions representative of solar irradiation (λ > 300 nm) at 60 °C in air. The chemical modifications resulting from photooxidation were followed by IR and UV-visible spectroscopies. The presence of pristine nanoboehmites was shown to change the rate of oxidation of polypropylene by reducing the oxidation induction period due to the presence of residual processing antioxidant. The differences of the oxidation induction periods between the nanocomposites and the pristine polymer disappear after solvent extraction of the antioxidant. The inefficiency of traditional antioxidant in retarding the photooxidation of polypropylene containing nanodispersed boehmite is proved. Antioxidant migration to the boehmite surface induced by the preferential interaction with the polar filler is proposed as an explanation. The oxidative behaviour of the organically modified boehmites was shown to depend on the type of organic substituent. p-Toluenesulfonate reduces the adsorption of antioxidants while the presence of a long-chain alkyl benzensulfonate increased the oxidation rate by generation of radical initiators.     

Photochemical stabilization of linear low-density polyethylene/clay nanocomposites: Towards durable nanocomposites

This article reports a study of the chemical modifications of LLDPE/nanoblend nanocomposites exposed to UV light in conditions of artificially accelerated ageing and natural weathering. Analysis by infrared spectroscopy of the chemical modifications produced by photoageing shows that the presence of an organo-clay leads to the decrease of the oxidation induction time of the polymer (LLDPE), which results in lower durability of the nanocomposites. Protection against photooxidation was tested with different kinds of UV stabilizers and with a metal deactivator. It is shown that the metal deactivator is very efficient in stabilizing the nanocomposite since it totally cancels the prodegradant effect of the organo-clay. This confirms the role played by iron impurities in natural clays. The use of a metal deactivator offers a new insight into the stabilization strategy for nanocomposites.     

Thermal degradation behaviors of a novel nanocomposite based on polypropylene and Co-Al layered double hydroxide

The thermal degradation behaviors of a novel nanocomposite based on polypropylene and organic Co/Al layered double hydroxide (PP/CoAl-LDH) were studied via thermogravimetric analysis (TGA) in the present work. The thermal degradation activation energies of the PP/CoAl-LDH nanocomposite were determined via Friedman and Flynn-Wall-Ozawa methods, and were compared with those of neat PP. The relationship between the organic CoAl-LDH concentration and the activation energies in PP/CoAl-LDH nanocomposite also has been investigated. An internal reason and an outer reason leading to high fire retardancy of PP/CoAl-LDH nanocomposite were proposed. The presence of CoAl-LDH tended to increase significantly the decomposition activation energy of nanocomposite at full-scale temperature and had an important influence on both of internal and outer reasons.     

Metallocene-mediated synthesis of chain-end functionalized polypropylene and application in PP/clay nanocomposites

This paper summarizes our research in the preparation of chain end functionalized isotactic polypropylene (PP) having a terminal functional group, such as Cl, OH, and NH₂. The chemistry involves metallocene-mediated propylene polymerization using rac-Me₂Si[2-Me-4-Ph(Ind)]₂ZrCl₂/MAO complex in the presence of styrene derivatives (St-f) and hydrogen, which serve as the chain transfer agents. The molecular weight of the resulting PP polymers with a terminal Cl, OH and NH₂ group (i.e., PP-t-Cl, PP-t-OH and PP-t-NH₂) are inversely proportional to the molar ratio of [St-f]/[propylene]. Despite the extremely low concentration of functional group, the high molecular weight chain end functionalized PP-t-OH and exhibit a distinctive advantage over other functional PP polymers containing side chain functional groups or long functional blocks. The terminal hydrophilic OH and cations, with good mobility and reactivity, effectively hydrogen bond and ion-exchange the cations (Li⁺, Na⁺, etc.) located between the clay interlayers, respectively. Such interactions anchor the PP chain to the clay surfaces. On the other hand, the remaining rest of the unperturbed end-tethered high molecular weight PP tail exfoliates the clay layers. This exfoliated structure is maintained even after further mixing of the PP-bearing platelets with pure neat PP polymers.     

Investigation of water absorption in clay-reinforced polypropylene nanocomposites

The behaviour of polypropylene nanocomposites containing different amounts of commercial nanoclay upon exposure to distilled water and sea water at different temperatures was investigated and compared with that of neat polypropylene. In the initial stages, the weight gain (moisture absorption) follows Fick's second law, but at longer times deviations are observed owing to physical degradation and in some cases a loss of mass. Distilled water diffuses more rapidly than sea water. As the nanoclay content increases, both the rate of moisture absorption and the maximum moisture content increase, owing to the hydrophilic nature of the nanoclay and the added compatibilizing agent. Although the moisture absorption decreases the flexural properties of both the nanocomposites and neat PP, because the unexposed (as-moulded) nanocomposites are significantly superior to the neat PP they remain so even after prolonged exposure.     

镁铝水滑石的有机改性实验研究

采用共沉淀法合成了对甲基苯磺酸有机插层改性的镁铝水滑石,用XRD、FTIR、TG-DSC等技术表征产物特征.研究表明,合成的对甲基苯磺酸插层LDH物相纯净、结晶度高,层间无硝酸根,而且2:1型有更好的晶形;2:1型对甲基苯磺酸插层LDH在450-500℃层状结构逐渐被破坏,而3:1型在400-460℃0层状结构被破坏....     

Preparation and burning behaviors of flame retarding biodegradable poly(lactic acid) nanocomposite based on zinc aluminum layered double hydroxide

A flame retarding biodegradable polylactic acid (PLA) nanocomposite based on flame retardant composites (containing ammonium polyphosphate (APP), pentaerythritol (PER) and melamine cyanurate (MC) by controlling the weight ratio was 2:2:1) and organomodified zinc aluminum layered double hydroxide (Zn-Al-LDH) has been prepared by melt-compounding directly. The morphology and burning behaviour of nanocomposite with 2 wt% Zn-Al-LDH loadings were investigated. The extent of dispersion of LDH was quantified by wide angle X-ray scattering (WAXS) and transmission electron microscopy (TEM), illuminating the good dispersion state for ZnAl-LDH in the PLA matrix. Significant improvements in fire retardant performance were observed for the nanocomposite from microscale combustion calorimeter (MCC) and cone calorimetry (reducing both the heat release rate and the total heat released). It revealed that incorporation of FR and ZnAl-LDH was very efficient in improving the flame retardance of PLA composite.     

From Zn-Al layered double hydroxide to ZnO nanostructure:Gradually etching by sodium hydroxide

Zn-Al layered double hydroxide(LDH) was used as precursor to produce ZnO nanostructures through dissolution of aluminum hydroxide in caustic soda.The Zn-Al LDH could transform into different nanostructures of ZnO on LDH nanosheets and even pure ZnO nanorods under various NaOH concentration.The formed ZnO nanorods vertically aligned on both LDH sides.UV-vis diverse reflectance spectra show that the obtained ZnO nanorods have a band gap of approximately 3.05 eV.Such ZnO/LDH nanostructures might be used as photocatalyst in the organic pollutant decomposition.     

Nonlinear behavior of polyethylene/layered double hydroxide nanocomposites under shear flow

The structural evolution of filler clusters in polyethylene/layered double hydroxide-based nanocomposites is investigated under application of a simple shear flow and is described in the framework of a modified Wagner model. Overall, the structural behavior of these polymer-clay nanocomposites is found to be similar to the behavior of filled elastomers for which breakdown of filler clusters at increasing strain and their reaggregation at decreasing strain were observed under oscillatory shear (Payne effect). Similar to the filled elastomers and other jammed systems, the polymer-clay nanocomposites demonstrate an asymmetric behavior upon approaching the steady state depending on whether the system was initially at higher or lower shear strain. In particular, the reaggregation time of filler structure in the quiescent state is found to be about one order of magnitude larger than the characteristic breakage time in the nonlinear shear regime. Published in Russian in Vysokomolekulyarnye Soedineniya, Ser. A. 2008, Vol. 50, No. 5, pp. 868–881. This article was submitted by the authors in English.     

The mechanism on the pH value influencing the property of glutamic acid/layered double hydroxide compounds

The influence of zeta potential, altered by the pH value in synthesis, on the property of glutamic acid (Glu for short)/LDH compounds has been studied. It was found that the layer charges increased first then decreased as the pH value increased, and the layer charge had prominent effect on the properties of the samples. The crystallinity degree and the interlayer spacing increased gradually and the morphology changed from tubular or fibrous to platelet structure as the layer charge increased. And a model has been proposed to explain how pH values in the synthesis influence the LDH compound property by altering their layer charges.     

Dispersion control and nematic ordering of Ni/Al layered double hydroxide suspensions

In this paper, we report the preparation of aqueous suspensions of Ni/Al layered double hydroxide (LDH) nanoparticles by a non-steady co-precipitation followed by peptization. By choosing suitable peptization temperature and time, well-dispersed suspensions were obtained. Meanwhile, the particle size, shape and size polydispersity can be efficiently controlled. Nematic ordering is observed in colloidal Ni/Al LDH suspensions and confirmed by birefringence observations and SAXS measurements. Furthermore, we showed that the sol-gel transition takes place after a liquid crystalline phase transition in concentrated Ni/Al LDH suspensions. The absence of isotropic-nematic phase separation can be attributed to the fact that the nematic phase droplets are too small to settle to the bottom of the cuvette.     

Effects of organo-clay and sodium dodecyl sulfonate intercalated layered double hydroxide on thermal and flame behaviour of intumescent flame retarded polypropylene

The thermal and flame performances of intumescent flame retarded polypropylene (PP/IFR) composites with organically modified clay or sodium dodecyl sulfonate intercalated layered double hydroxide (SDS-LDH) were studied. The organo-clay particles were partially exfoliated in the PP matrix, while intercalation and aggregation was obtained for SDS-LDH. Incorporation of SDS-LDH improved the thermal stability and flame retardancy of the intumescent flame retarded PP composite in the early stage of heating and combustion; while the effects of organo-clay came into play in the middle-later stage. Differences in degradation pathway of clay and LDH were responsible for the above phenomenon which bore important implication for the barrier mechanism. The introduction of organo-clay into PP/IFR not only increased the char residue, but also formed compact and folded morphology of char residue which provided more effective protect for underlying materials against heat and oxygen relative to LDH, thus improved the flame retardancy of intumescent flame retarded PP samples more efficiently.     

Sugar-anionic clay composite materials: intercalation of pentoses in layered double hydroxide

The intercalation of non-ionized guest pentoses (ribose and 2-deoxyribose) into the Mg-Al and Zn-Al layered double hydroxides (LDHs) was carried out at 298 K by the calcination-rehydration reaction using the Mg-Al and Zn-Al oxide precursors calcined at 773 K. The resulting solid products reconstructed the LDH structure with incorporating pentoses, and the maximum amount of ribose intercalated by the Mg-Al oxide precursor was approximately 20 times that by the Zn-Al oxide precursor. The ribose/Mg-Al LDH was observed to have the expanded LDH structure with a broad (003) spacing of 0.85 nm. As the thickness of the LDH hydroxide basal layer is 0.48 nm, the interlayer distance of the ribose/Mg-Al LDH is 0.37 nm. This value corresponds to molecular size of ribose in thickness (0.36 nm), supporting that ribose is horizontally oriented in the interlayer space of LDH. The maximum amount of ribose intercalated by the Mg-Al oxide precursor was approximately 5 times that of 2-deoxyribose. Ribose is substituted only by the hydroxyl group at C-2 position for 2-deoxyribose. Therefore, the number of hydroxyl group of sugar is essentially important for the intercalation of sugar molecule into the LDH, suggesting that the intercalation behavior of sugar for the LDH was greatly influenced by hydrogen bond between hydroxyl group of the intercalated pentose and the LDH hydroxide basal layers.     

Influence of SEBS-g-MA on morphology, mechanical, and thermal properties of PA6/PP/organoclay nanocomposites

Polyamide 6/polypropylene (PA6/PP = 70/30 parts) blends containing 4 phr (parts per hundred resin) of organically modified clay (organoclay) toughened with maleated styrene-ethylene-butylene-styrene (SEBS-g-MA) were prepared by melt compounding using co-rotating twin-screw extruder followed by injection molding. X-ray diffraction (XRD) and transmission electron microscope (TEM) were used to characterize the structure of the nanocomposites. The mechanical properties of the nanocomposites were determined by tensile, flexural, and notched Izod impact tests. The single edge notch three point bending test was used to evaluate the fracture toughness of SEBS-g-MA toughened PA6/PP nanocomposites. Thermal properties were studied by using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). XRD and TEM results indicated the formation of the exfoliated structure for the PA6/PP/organoclay nanocomposites with and without SEBS-g-MA. With the exception of stiffness and strength, the addition of SEBS-g-MA into the PA6/PP/organoclay nanocomposites increased ductility, impact strength and fracture toughness. The elongation at break and fracture toughness of PA6/PP blends and nanocomposites were increased with increasing the testing speed, whereas tensile strength was decreased. The increase in ductility and fracture toughness at high testing speed could be attributed to the thermal blunting mechanism in front of crack tip. DSC results revealed that the presence of SEBS-g-MA had negligible effect on the melting and crystallization behavior of the PA6/PP/organoclay nanocomposites. TGA results showed that the incorporation of SEBS-g-MA increased the thermal stability of the nanocomposite.     

Accelerated weathering of polypropylene/wood flour composites

Wood-plastic composites (WPCs) have received increasing attention during the last decades, because of many advantages related to their use. Some of their main applications are represented by outdoor furnishing and decking; therefore, it is important to assess their behaviour under UV exposure. In this work, polypropylene/wood flour composites were prepared and their resistance to photooxidation investigated. The composites were prepared by extrusion and compression moulding, and were subjected to mechanical tests, FTIR analysis and molecular weight measurements. The results showed that the composites retained a higher fraction of the original mechanical properties after accelerated weathering; the wood flour did not significantly degrade throughout the irradiation time slot of the investigation and the composites kept a higher percentage of the original molecular weight.     

牛黄酸及水杨酸系药物对镁铝层状复合氢氧化物的插层组装

通过XRD和IR表征对镁铝层状复合氧氧化物(LDH)与水杨酸、乙酰氨基酚、乙酰水杨酸,以及谷氨酸、色氨酸、牛黄酸反应产物的比较分析,研究了不同药物对有关组装方式的适宜性.结果表明水杨酸类药物均可通过离子交换组装到LDH层间,晶胞参数c由2.3893 nm依次增大为2.4024、2.4110和2.4111nm,通道高度h由0.3194 nm增大为0.3238、0.3267和0.3268 nm;通过离子交换能将谷氨酸组装到LDH层间,产物的IR吸收、热分解行为及TEM形貌与前体有明显区别,晶胞参数c由2.3765nm增大为2.3851nm,h由0.3152nm增大为0.3180nm;共沉淀法适宜制备LDH-牛黄酸插层复合物,但简单的离子交换不能使色氨酸与LDH有效复合.