Swelling behavior, mechanical properties and network parameters of pH- and temperature-sensitive hydrogels of poly((2-dimethyl amino) ethyl methacrylate-co-butyl methacrylate)

In this study, swelling behavior and mechanical properties of polyelectrolyte cationic hydrogels of poly((2-dimethylamino) ethyl methacrylate) (PDMAEMA), and poly((2-dimethylamino) ethyl methacrylate-co-butyl methacrylate) (P(DMAEMA-co-BMA)), were investigated. Hydrogels were prepared by free-radical solution copolymerization of DMAEMA and BMA using ethylene glycol dimethacrylate (EGDMA) as the crosslinking agent. Compression-strain measurements were used to analyze the mechanical properties of the hydrogels. It was found that increasing the amount of BMA comonomer in the gel structure increases the compression modulus of the material. The results of mechanical measurements were used to characterize the network structure of the hydrogels, namely the effective crosslinking density (. It was found that exceeds the theoretical crosslinking density (ν_t) calculated from the initial amount of EGDMA used for hydrogel synthesis. These hydrogels demonstrated dual sensitivity to both pH and temperature. It was shown that the pH-sensitive or temperature-sensitive phase transition behavior of the gels can be changed by changing the temperature or pH of the swelling medium at constant hydrogel composition. Increasing the temperature decreased the transition pH of the pH-sensitive phase transition. On the other hand, increasing the pH of the surrounding medium decreased the transition temperature of the temperature-sensitive phase transition. Incorporation of BMA in the gel structure has a significant effect on the transition point of the gel. Increasing the BMA content reduced the transition pH and temperature of the pH- and temperature-sensitive phase transition, respectively. The similar effect of increasing temperature or BMA content can be explained by the role of hydrophobicity in the phase transition behavior of hydrogels. Finally, the results of equilibrium swelling and compression-strain measurements were used to calculate the polymer-solvent interaction parameters of these hydrogels using the Flory-Rehner equation of equilibrium swelling.     

Radiation synthesis and characterization of poly(N,N-dimethylaminoethyl methacrylate-co-N-vinyl 2-pyrrolidone) hydrogels

In this study, radiation synthesis and characterization of swelling behavior and network structure of poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA), and poly(N,N-dimethylaminoethyl methacrylate-co-N-vinyl 2-pyrrolidone) (P(DMAEMA-co-VP)), hydrogels were investigated. PDMAEMA and P(DMAEMA-co-VP) hydrogels in the rod forms were prepared by irradiating the ternary mixtures of DMAEMA/VP/cross-linking agent, ethyleneglycol dimethacrylate (EGDMA), by gamma rays at ambient temperature. In composition ranges where the three components were completely miscible, water was also added to the ternary mixture to provide the formation of homogeneous polymerization and gelation. The influence of irradiation dose, comonomer, VP, and cross-linking agent, EGDMA, content on the total percentage gelation and monomer conversion were investigated. The effect of pH and temperature on the swelling behavior of hydrogels have also been examined. Hydrogels showed typical pH response and temperature responses, such as low-pH and low temperature swelling and high-pH and high temperature deswelling. Polymer-solvent interaction parameter (χ) and enthalpy and entropy changes appearing in the χ parameter for the P(DMAEMA-co-VP)-water system were determined by using Flory-Rehner theory of swelling equilibrium. The negative values for ΔH and ΔS indicate that prepared pure PDMAEMA and P(DMAEMA-co-VP) hydrogels have lower critical solution temperature (LCST) and Flory-Rehner theory of swelling equilibrium provides a satisfactory agreement to the experimental swelling data of the hydrogels.     

温度/pH敏感性接枝共聚物水凝胶P(DMAEMA-g-NIPAM)的 合成及性质研究

利用大分子单体技术, 采用自由基溶液聚合合成了温度/pH敏感性聚甲基丙烯酸-N,N-二甲氨基乙酯接枝聚N-异丙基丙烯酰胺[P(DMAEMA-g-NIPAM)]水凝胶. 用红外光谱及扫描电镜对凝胶的组成及形貌进行了表征. 凝胶的去溶胀和溶胀动力学研究表明, 所合成的凝胶具有温度和pH敏感性. 与传统的聚丙烯酸系水凝胶相比, P(DMAEMA-g- NIPAM)具有相反的pH敏感性; P(DMAEMA-g-NIPAM)凝胶在55 ℃时具有较快的去溶胀速率, 随着凝胶中接枝链PNIPAM量的增加, 凝胶的去溶胀速率加快.     

Synthesis and characterization of original 2-(dimethylamino)ethyl methacrylate/poly(ethyleneglycol) star-copolymers

Novel synthetic transfection vectors with linear triblock and star-shaped diblock copolymer architectures have been synthesized by atom transfer radical polymerization (ATRP). Based on 2-(dimethylamino)ethyl methacrylate (DMAEMA) and copolymerization with poly(ethyleneglycol) α-methoxy, ω-methacrylate (MAPEG), the synthesis was realized using CuBr ligated with 1,1,4,7,10,10-hexamethyltriethylenetetramine (HMTETA) as catalytic complex and either ethyl 2-bromoisobutyrate (EBⁱB) or bis(α-bromoisobutyryl) N-methyl diethanolamine (DEA) or tris(α-bromoisobutyryl) triethanolamine (TEA) as (multifunctional)initiator. The polymers were characterized by GPC and NMR. The solution properties of these homopolymers and palm-tree-like copolymers were investigated by viscometry either in pure water or in buffered aqueous solutions. Interestingly, all the synthesized polymers show polyelectrolyte effect in Millipore water (25 °C) and in Hepes (20 mM) buffer solution (pH 7.4, NaCl 155 mM, 25 °C). Fitting of these viscometric data according to either Fuoss or Fedors equation allows for calculating the intrinsic viscosity of the polymers. These results are compared with dynamic light scattering (DLS) experiments to determine absolute masses. Finally, DEA based palm-tree-like copolymer is investigated to AFM measurement and micelles were observed at pH 8.     

Thermal and pH dual responsive polyurethane/2-(diisopropylamino)ethyl methacrylate hybrids: Synthesis,characterization, and swelling behavior

This article describes the synthesis and characterization of stimuli-sensitive hybrid films using 2-(diisopropylamino)ethyl methacrylate (DPA), and a polyurethane (PU) base on isophorone diisocyanate. Hybrid films with different amounts of DPA present good film and physicochemical properties. Characterization techniques such as Fourier transform infrared, UV–visible, modulate differential scanning calorimetry, and thermogravimetric analysis reveal chemical interactions between PU and DPA groups. Swelling behavior of films shows a dependence on DPA content, pH, and temperature and different mechanisms of water uptake in response to pH and temperature variations. Hybrid systems would allow controlling water absorption not only through pH or temperature but also from the chosen PU/DPA proportion.     

Selective permeation of CO2 through poly 2-(N,N-dimethyl)aminoethyl methacrylate membrane prepared by plasma-graft polymerization technique

A membrane having an amine moiety was prepared by plasma-grafting 2-(N,N-dimethyl)aminoethyl methacrylate (DAMA) onto a microporous polyethylene substrate. Permselectivity of the membrane for CO₂ over N₂ was achieved in both dry and water swollen conditions. When the CO₂ partial pressure in the feed gas was 0.047 atm, the selectivity of CO₂ over N₂ reached 130 for the highly swollen water containing membrane. This value was found to agree with that obtained with a mobile carrier membrane (supported liquid membrane) using DAMA as the carrier. The effects of several experimental conditions such as degree of grafting, feed partial pressure and temperature on the membrane performance were studied. It was suggested that the membrane acted as a fixed carrier membrane for CO₂ facilitated transport in under the dry condition and acted as a fixed reaction site membrane in the water swollen condition. The carrier transport mechanism is discussed for dry and aqueous membranes.     

Microwave-Assisted Synthesis and Characterization of Poly(2-(dimethylamino)ethyl methacrylate) Grafted Gellan Gum

Poly(2-(dimethylamino)ethylmethacrylate) was grafted on gellan gum (GG) in aqueous medium under microwave irradiation using ammonium persulfate and N,N,N′N′-tetramethylethylenediamine as the initiation system. Grafted copolymers were characterized by FT-IR, TGA, and SEM techniques. The influence of microwave power, exposure time, and composition of the reaction mixture on extent of grafting was studied. Conditions for obtaining the highest degree of grafting were optimized. The rate of grafting was determined from weight measurements. The overall activation energy for grafting is found to be 31.2 kJ/mol, indicating the occurrence of the grafting process with absorption of low thermal energy.     

Fast responsive poly(N-isopropylacrylamide) hydrogels prepared in phenol aqueous solutions

Fast responsive poly(N-isopropylacrylamide) (PNIPAAm) hydrogels with improved properties were prepared in phenol aqueous solutions with different concentrations. Due to the expanded network structure in water, the resulted hydrogels are capable of absorbing a large amount of water, i.e. exhibits a much increased swelling ratio at room temperature. Importantly, the hydrogels demonstrated much faster response rate than that of traditional PNIPAAm hydrogel upon external temperature increase.     

Target grafting of poly(2-(dimethylamino)ethyl methacrylate) to biodegradable block copolymers

A series of copolymers composed of methoxy poly(ethylene glycol) and a hydrophobic block of poly(ɛ-caprolactone-co-propargyl carbonate) grafted with poly(2-[dimethylamino]ethyl methacrylate) was synthesized by combining ring opening polymerization, azide-alkyne click reaction, and atom transfer radical polymerization (ATRP). Well-defined copolymers with a target composition and a tailored structure were achieved via the grafting from approach by using a single catalytic system for both click reaction and ATRP. Kinetic studies demonstrated the controlled/living character of the employed polymerization methods. The thermal properties and self-assembly in aqueous medium of the graft copolymers were dependent on their composition. The resulting polymeric materials showed low cytotoxicity toward L929 cells, demonstrating their potential for biomedical applications. This type of materials containing cationic side chains tethered to biocompatible and biodegradable segments could be the basis for promising candidates as drug and gene delivery systems.     

A one-pot synthesis and mild cleavage of 2-[2- or 5-(alkylsulfanyl)pyrrol-1-yl]ethyl vinyl ethers by t-BuOK/DMSO: a novel and facile approach to N-vinylpyrroles

Substituted N-[2-(vinyloxy)ethyl]pyrroles, prepared in good yield through an allenic or acetylenic carbanion/isothiocyanate one-pot methodology from 2-(vinyloxy)ethyl isothiocyanate and allyloxyallene, methoxyallene, N,N-dimethyl-2-propyn-1-amine, and 3-methoxy-1-(methylsulfanyl)-1-propyne, are smoothly converted into the corresponding N-vinylpyrroles using t-BuOK/DMSO (room temperature). The reaction proceeds via elimination of vinyl alcohol from the N-[2-(vinyloxy)ethyl] substituent and represents a novel approach to N-vinylpyrroles.     

Regioselective Deprotection of 1,3-Dibenzyl-5-（N,N-dimethylamino）-6-phenylethyluracil

The deprotection of 1,3-dibenzyl-5-（N,N-dimethylamino）-6-phenyl-ethyluracil I was investigated. A practical, regioselective N3 deprotection of compound I was performed with excellent yield using cyclohexene as a hydrogen donor.     

Poly(2-(dimethylamino)ethyl methacrylate) brushes fabricated by surface-mediated RAFT polymerization and their response to pH

In this study, well-defined, high density poly(2-(dimethylamino)ethyl methacrylate) [poly(DMAEMA)] brushes were fabricated by the combination of the self-assembly of a monolayer of RAFT agent and surface-mediated RAFT polymerization. The whole fabrication process of the poly(DMAEMA) was followed by water contact angles, grazing angle-Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy. Kinetic studies revealed a linear increase in poly(DMAEMA) film thickness with polymerization time, indicating that the chain growth from the surface was a controlled process. Characterization of the poly(DMAEMA) brushes, such as molecular weight and thickness determination, were measured by gel permeation chromatography, and ellipsometry, and the grafting density was estimated. The pH response of the poly(DMAEMA) brushes was further investigated and the results verified the “brush-like” to “mushroom-like” transition of the poly(DMAEMA) chains due to the reversible protonation/deprotonation upon changing the solution pH.     

The synthesis and solution behaviors of novel amphiphilic block copolymers based on d-galactopyranose and 2-(dimethylamino)ethyl methacrylate

A series of novel stimuli-responsive AB, ABA, and BAB type block copolymers based on 6-O-methacryloyl-1,2:3,4-di-O-isopropylidene-d-galactopyranose (MAIpGP:A block) and 2-(N,N-dimethylamino)ethyl methacrylate (DMAEMA: B block) were synthesized via ATRP techniques using ethyl 2-bromoisobutyrate (EBiB) as monofunctional ATRP initiator in the case of diblock copolymer and diethyl meso-2,5-dibromoadipate (DEDBA) as bifunctional ATRP initiator in the case of triblock copolymers. The PMAIpGP blocks of the AB, ABA, and BAB type linear block copolymers were converted to water soluble PMAGP blocks via deprotection process under mild acidic conditions. Both proton NMR and DLS studies demonstrated that block copolymers were temperature-sensitive, whereby the lower critical solution temperature (LCST) of polymers varied with the polymerization degrees of comonomers in the block copolymers. LCST was determined to be between ∼35 °C and 55 °C depending on the type and the comonomer compositions of the block copolymers. It was observed that an increase on the percentage of hydrophilic PMAGP block in block copolymer caused an increase on the LCST value as expected.     

氧阴离子引发甲基丙烯酸-2-(N,N-二甲氨基)乙酯聚合制备Y型大分子单体

氧阴离子聚合(Oxyanion－initiated Polymerization)是一类新型的聚合方法[‘,’‘．利用个乙烯基苦醇钾作为功能性引发剂,引发甲基丙烯酸－2－(NJ－二乙氨基)乙酯聚合,形成末端带可聚合官能团的大分子单体‘”“．氧阴离子引发剂通常难以引发甲基丙烯酸烷基酯单体聚合,但却能引发甲基丙烯酸氨基酯类单体发生聚合．由于氨基乙酯基7位上氮原子的供电子性,它能与钾离子形成螫合物,使氧阴离子的亲核性增加,从而更具有活性,引发单体聚合．氧阴离子聚合具有速度快、活性高、反应温度接近室温和产物的单分散性好等特点．尽管目前还不清楚这种反…     

Swelling behaviour of thermo-sensitive hydrogels based on oligo(ethylene glycol) methacrylates

The thermo-sensitive swelling behaviour of hydrogels based on 2-(2-methoxyethoxy)ethyl methacrylate (MEO₂MA) and synthesized by free radical polymerization has been investigated. The homopolymer hydrogel presents a low critical solution temperature (LCST) close to room temperature, which can be modulated by copolymerization with longer oligo(ethylene glycol) side chain methacrylates (OEG_xMA). Then, three series of copolymeric hydrogels synthesized with MEO₂MA and several low ratios of OEG_xMA with M_n = 475 g mol⁻¹ (OEG₈MA), M_n = 1100 g mol⁻¹ (OEG₂₃MA) and M_n = 2080 g mol⁻¹ (OEG₄₅MA) were studied. In addition to conventional tetra(ethylene glycol) dimethacrylate (TEGDMA) crosslinker, the use of biodegradable oligo(caprolactone) dimethacrylate (OCLDMA) was also tested. The hydrophilic/hydrophobic balance, function of the short and the long OEG side chains, establishes a swelling behaviour depending on monomer composition, side chain length and temperature. The swelling at equilibrium increases with increasing the amount of OEG_xMA in the copolymer and, at the same time, the collapsing moves progressively to higher temperature. The temperature dependent volumetric response of some of these hydrogels can be compare with the most extended thermo-sensitive hydrogel, which is based on poly(N-isopropylacrylamide) (P(N-iPAAm)). Therefore, they are potential candidates to replace it in applications where biocompatibility is required.     

Swelling behaviour of crosslinked hydrogels based on (2-hydroxyethyl methacrylate) with a zwitterionic comonomer (1-3-sulfopropyl-2-vinyl-pyridinium-betaine)

Copolymeric hydrogels were prepared by the chemically initiated free radical copolymerization in aqueous solution of mixtures of [1-(3-sulfopropyl)-2-vinyl-pyridinium-betaine] (SPV) and (2-hydroxyethyl methacrylate) (HEMA) in the presence of a crosslinking agent N,N′-methylene-bis-acrylamide (MBA). The hydrogels were swollen to equilibrium in water and aqueous KSCN at 298 K and their swelling behaviour has been investigated using gravimetric measurements. The effects of the concentration of KSCN and the mole fraction of SPV in the feed (F_s) have been noted and discussed. The main findings are:(a) In water, the water content (W₁) of copolymeric hydrogels is insensitive to SPV content at F_s ? 0.45. In contrast, W₁ decreases sharply with decreasing F_s within the range of 0 < F_s < 0.45. (b) In aq. KSCN, the degree of total swelling (W) exceeds the value in pure water, the enhancement in swelling being most marked at low values of [KSCN]. The content of water within the hydrogel increases with KSCN concentration in the swelling medium for low values of [KSCN], but thereafter falls with further increase in salt concentration. In contrast, the salt content within the swollen hydrogel displays a continuous increase with increasing [KSCN]. All these results of item (b) are for copolymeric hydrogels within the full range of F_s (0 < F_s < 1). (c) at a fixed aq. KSCN concentration, both W and W₁ increase sharply with increasing F_s over the entire range of copolymer composition.     

Thermodynamic properties of copolymeric hydrogels based on 2-hydroxyethyl methacrylate and a zwitterionic methacrylate

The copolymerisation of 2-hydroxyethyl methacrylate and a zwitterionic methacrylate, namelyN,N-dimethyl-N-methacryloxyethyl-N-(3-sulphopropyl)-ammonium betaine (SPE), in the presence of a tetrafunctional crosslinker has been effected to 100% conversion by -irradiation. The resultant xerogels of different compositions were swollen to equilibrium in water to yield hydrogels. Volumetric swelling and compression-strain measurements were made over the temperature range 278–343 K. All these copolymers showed an increasing volumetric swelling with temperature, but the derived values of the partial molar enthalpy, entropy and Gibbs free energy of dilution showed certain differences which were interpreted on the basis of copolymer dyad distribution.     

Synthesis of amphiphilic diblock copolymers poly[2-(<Emphasis Type="Italic">N</Emphasis>, <Emphasis Type="Italic">N</Emphasis>-dimethylamino)ethyl methacrylate]-<Emphasis Type="Italic">b</Emphasis>-poly(stearyl methacrylate) and their self-assembly in mixed solvent

Amphiphilic diblock copolymers consisting of 2-(N, N-dimethylamino)ethyl methacrylate (DMAEMA, abbreviated as DMA) and stearyl methacrylate (SMA) with different degrees of polymerization and compositions were prepared by reversible addition–fragmentation chain transfer (RAFT) copolymerization. The composition and chemical structures of (co)polymers were confirmed by the measurements of ¹H NMR spectroscopy and gel permeation chromatography (GPC). The self-aggregating structures of amphiphilic diblock copolymers with the concentration of 0.1~0.3 wt.% in THF/water mixed solvent was investigated by transmission electron microscopy (TEM) and dynamic light scattering (DLS). It was found that both the morphologies and aggregating particle size resulted from the amphiphilic diblock copolymers depended on the variation of pH values, the lengths of the hydrophobic PSMA chains, and the weight ratio of THF/water mixed solvent.     

Adsorption of protein on the surface of thermosensitive poly(methyl methacrylate) microspheres modified with the N-(2-hydroxypropyl)methacrylamide and 2-(methacryloyloxy)ethyl phosphorylcholine moieties

A series of microspheres composed of methyl methacrylate (MMA) and N-(2-hydroxypropyl)methacrylamide (HPMA), and/or 2-(methacryloyloxy)ethyl phosphorylcholine (MPC), i.e., binary copolymer microspheres [poly(HPMA-co-MMA)_KPS and poly(HPMA-co-MMA)_ABIP] and ternary ones [poly(HPMA/MPC-co-MMA)_KPS and poly(HPMA/MPC-co-MMA)_ABIP], were prepared by emulsifier-free emulsion copolymerization using potassium peroxodisulfate (KPS) or 2,2′-azobis[2-(imidazolin-2-yl)propane] dihydrochloride (ABIP) as initiators. The decrease in ζ-potential of the polymer microspheres is caused by the addition of the HPMA and/or MPC moieties. Equilibrium water content of poly(HPMA-co-MMA)_ABIP showed a remarkable swelling change with a change in response to temperature: the hydrated conformation at 28°C and the dehydrated one at above 40°C. The adsorption of protein on the polymer microspheres also changed in response to change in temperature. The ternary polymer microspheres effectively suppressed the adsorption both of Alb and Glo, less than binary ones. A series of polymer microspheres are expected to apply as a novel drug carrier with both thermosensitive and nonthrombogenic functions. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3349–3357, 1997     

Syntheses and structures of iron carbonyl complexes derived from N-(5-methyl-2-thienylmethylidene)-2-thiolethylamine and N-(6-methyl-2-pyridylmethylidene)-2-thiolethylamine

The reaction of N-(5-methyl-2-thienylmethylidene)-2-thiolethylamine (1) with Fe₂(CO)₉ in refluxing acetonitrile yielded di-(μ₃-thia)nonacarbonyltriiron (2), μ-[N-(5-methyl-2-thienylmethyl)-η¹:η¹(N);η¹:η¹(S)-2-thiolatoethylamido]hexacarbonyldiiron (3), and N-(5-methyl-2-thienylmethylidene)amine (4). If the reaction was carried out at 45 °C, di-μ-[N-(5-methyl-2-thienylmethylidene)-η¹(N);η¹(S)-2-thiolethylamino]-μ-carbonyl-tetracarbonyldiiron (5) and trace amount of 4 were obtained. Stirring 5 in refluxing acetonitrile led to the thermal decomposition of 5, and ligand 1 was recovered quantitatively. However, in the presence of excess amount of Fe₂(CO)₉ in refluxing acetonitrile, complex 5 was converted into 2-4. On the other hand, the reaction of N-(6-methyl-2-pyridylmethylidene)-2-thiolethylamine (6) with Fe₂(CO)₉ in refluxing acetonitrile produced 2, μ-[N-(6-methyl-2-pyridylmethyl)-η¹ (N_py);η¹:η¹(N); η¹:η¹(S)-2-thiolatoethylamido]pentacarbonyldiiron (7), and μ-[N-(6-methyl-2-pyridylmethylidene)-η²(C,N);η¹:η¹(S)-2- thiolethylamino]hexacarbonyldiiron (8). Reactions of both complex 7 and 8 with NOBF₄ gave μ-[(6-methyl-2-pyridylmethyl)-η¹(N_py);η¹:η¹(N);η¹:η¹(S)-2-thiolatoethylamido](acetonitrile)tricarbonylnitrosyldiiron (9). These reaction products were well characterized spectrally. The molecular structures of complexes 3, 7-9 have been determined by means of X-ray diffraction. Intramolecular 1,5-hydrogen shift from the thiol to the methine carbon was observed in complexes 3, 7, and 9.