Solubility and Flory Huggins parameters of SBES, poly(styrene-b-butene/ethylene-b-styrene) triblock copolymer, determined by intrinsic viscosity

Solubility parameter and Flory Huggins interaction parameter of a triblock SBES have been obtained from intrinsic viscosity measurements. The solubility of the block copolymer in all solvents (methyl-cyclohexane, cyclohexane, cyclopentane, toluene and benzene) was found good except in the case of n-hexane. The results obtained are similar to other found in literature for SBR and SBS rubbers, and indicate that cyclohexane and cyclopentane and methylcyclohexane are the most compatible solvents for this kind of polymer.     

四元系溶液中溶质间的Gibbs自由能相互作用参数的研究

用气液色谱法测定２９８．１５Ｋ下，有机溶质在尿素＋高氯酸钠＋甲酰胺固定液中的保留参数，用ＭｃＭｉｌｌａｎ－Ｍａｙｅｒ理论，将溶液的势力学过量性质与溶液中粒子间的对相互作用、三相互作用参数相联系，用热力学方法求得该四元体系中溶质的气液色谱保留参数与Ｇｉｂｂｓ自由能相互作用参数的联系，并就溶质间的相互作用及混合溶剂性质的影响进行了讨论。     

Enthalpy and entropy interaction parameters of sodium chloride with some monosaccharides in water

Dilution enthalpies of sodium chloride and some monosaccharides (glucose, ga-lactose, xylose, arabinose, and fructose) in water and mixing enthalpies of aqueous sodium chloride and these monosaccharide solutions were measured by using an improved precision semimicro-titration calorimeter. Transfer enthalpies of sodium chloride from water to aqueous saccharide solutions were evaluated as well as enthalpy interaction parameters of sodium chloride with these monosaccharides in water. Combined with Gibbs energy interaction parameters, entropy interaction parameters were also obtained. The results show that interactions of the saccharides with sodium chloride depend on the stereochemistry of saccharide molecules. These interaction parameters can identify stereochemical structure of saccharide molecules.     

SEBS triblock copolymer-solvent interaction parameters from inverse gas chromatography measurements

Solubility parameter and Flory-Huggins polymer-solvent interaction parameter of an SEBS (poly(styrene-b-butene/ethylene-b-styrene) triblock copolymer) rubber, were measured by inverse gas chromatography (IGC) technique. The values obtained indicate that cyclohexane, n-pentane and cyclopentane are the most compatible solvents for this kind of polymers. Results were compared with previous data obtained from intrinsic viscosity measurements; also, an estimation using UNIFAC-FV model was performed showing differences less than 35% in terms of infinite dilution activity coefficient of solvents.     

Micellization and interaction of anionic and nonionic mixed surfactant systems in water

Interaction between binary surfactant mixtures containing anionic surfactants viz. sodium dodecyl sulphates (NaDS) and magnesium dodecyl sulphates (Mg(DS)₂) and a nonionic surfactants viz. dodecyl dodecapolyethylene glycol ether (C₁₂E₁₂) and dodecyl pentadecapolyethylene glycol ether (C₁₂E₁₅) in water at different mole fractions (0–1) were studied by surface tension, viscometry and dynamic light scattering (DLS) methods. The composition of mixed micelles and the interaction parameter, β evaluated from the CMC data obtained by surface tension for different systems using Rubingh's theory were discussed. Activity coefficient (f₁ and f₂) of metal dodecyl sulphates (MDS)/C₁₂E_m (m = 12, 15) mixed surfactant systems were evaluated, which shows extent of ideality of individual surfactant in mixed system. The estimated interaction parameter indicates an overall attractive interaction in the mixed micelles, which is predominant for NaDS as compared to Mg(DS)₂. Counter ion valency has specific effect on the mixed micelles, as Mg(DS)₂ has less interaction with nonionic surfactants in comparison to NaDS due to strong condensation of counter ion. The stability factors for mixed micelles were also discussed by Maeda's approach, which was justified on the basis of steric factor due to difference in head group of nonionic surfactant. DLS measurements and viscosity data reveals the synergism in mixed micelles, showing typical viscosity trends and linearity in sizes were observed.     

Phase state diagrams of the poly(dimethylsiloxane)—poly(diethylsiloxane) system

Phase equilibria in the poly(dimethylsiloxane)(PDMS)—polydiethylsiloxane (PDES) system in the amorphous and liquid-crystal states were studied by optical interferometry. The findings obtained were compared with the data of calorimetric measurements. The experiments were carried out in a wide range of molecular weights and temperatures, and the phase diagrams were constructed. Thermodynamic analysis of the experimental data was performed in the framework of the Flory—Haggins theory for polymeric solutions. The analytical expressions for calculation of the pair interaction parameter using the binodal and liquidus curves were obtained. The pair interaction parameters of polymers and their dependences on the temperature and molecular weight were determined. The pair interaction parameter was shown to decrease with increasing the molecular weight of the oligomer component, approaching asymptotically a limiting value, which characterizes the interaction of the high molecular-weight PDMS and PDES. It was shown that the phase equilibria in the PDMS—PDES systems can be predicted quantitatively and qualitatively.     

Thermodynamic interactions and characterisation of naphthenic oil by inverse gas chromatography

The thermodynamic properties of naphthenic oil, a plasticiser, were investigated by means of inverse gas chromatography (IGC) using 10 different kinds of solvents as probes. Some thermodynamic parameters, such as specific retention volume, weight fraction activity coefficient, Flory–Huggins interaction parameter, partial molar heats of mixing and solubility parameter were obtained to judge the interactions between oil and solvents and the solubility of oil in these solvents. The results indicated that n-heptane, n-hexane, cyclohexane, chloroform, benzene and diethyl ether are good solvents for oil at experimental temperatures. The solubility parameters of oil varied from 13.94 to 13.21?(J?cm^?3)^1/2 at temperature range 323–353?K. The solubility parameter of oil was calculated to be 14.38?(J?cm^?3)^1/2 at room temperature, which is consistent with that obtained using surface tension–solubility parameter relation method.     

气相色谱法研究聚辛烯-1与不同溶剂的热力学相互作用

用气相色谱法测定了聚辛烯－１与８种溶剂的Ｆｌｏｒｙ－Ｈｕｇｇｉｎｓ相互作用参数χ１和聚辛烯－１的溶解度参数,确定了χ１与温度的数学关系式。测定结果表明聚辛烯－１溶于正辛烷是一个放热过程。     

葡萄糖与醇在甲酰胺溶液中的焓相互作用参数

利用量热法测定了298.15K时葡萄糖在一些醇(甲醇、乙醇、1-丙醇、1-丁醇)与甲酰胺的混合溶剂中的溶解热.采用McMilan-Mayer方法,将溶液热力学过量性质与溶液中粒子的相互作用参数相关联,求得了粒子间的焓对相互作用参数和三分子相互作用参数,并就溶质-溶质间的相互作用及溶剂的影响进行了讨论.     

蛋白质在疏水色谱中的变性热力学

研究21-80℃温度范围内一些蛋白质和小分子在疏水相互作用色谱中的热行为。利用Van't Hoff作图(lnk'-1/T)测定蛋白质分子的热力学参数(ΔH°, ΔS°和ΔG°), 根据标准熵变(ΔS°)和标准自由能变(ΔG°)判断蛋白质在色谱过程中的构象变化, 通过ΔH°-ΔS°的线性关系估计蛋白质变性时的"补偿温度"(β), 鉴定蛋白质在疏水相互作用色谱中保留机理的同一性。     

聚对苯二甲酸乙二醇酯与聚碳酸酯及聚酚氧树脂间的相互作用参数

聚对苯二甲酸乙二醇酯与聚碳酸酯及聚酚氧树脂间的相互作用参数张瑞云，罗筱烈，马德柱，樊凤秋（中国科技大学材料科学与工程系，合肥，２３００２６）（河南师范大学化学系）关键词高聚物共混，相互作用参数，聚对苯二甲酸乙二醇酯，聚碳酸酯，聚酚氧树脂对于部分相容或...     

甘氨酸与氯化碱金属在水中的焓相互作用参数

氨基酸在混合溶液中的热力学性质及相互作用的研究不论对溶液化学还是生命科学都是十分重要的．对此国内已有不少的研究h，’1．利用偿效应的方法研究氨基酸与电解质间的相互作用是很有效的卜一句，但大多数的工作都是在低浓度下研究一个氨基酸分子和一个电解质离子对间的相互作用烩．本文测定了甘氨酸在水中和在LICI、NaCI、KCI的水溶液中的溶解偿，计算出甘氨酸与各个公在水中的偿对相互作用参数和三相互作用参数，并由此讨论了甘氨酸与这些盐的对分子相互作用和三分子相互作用．1实验部分试剂：甘氨酸为ARfa，K甲醇一水重结晶．LI…     

Miscibility in blends of poly(3-hydroxybutyrate) and poly(vinylidene chloride-co-acrylonitrile)

Miscibility behavior of poly(3-hydroxybutyrate) [PHB]/poly(vinylidene chloride-co-acrylonitrile) [P(VDC-AN)] blends have been investigated by differential scanning calorimetry and optical microscopy. Each blend showed a single T_g, and a large melting point depression of PHB. All the blends containing more than 40% PHB showed linear spherulitic growth behavior and the growth rate decreased with P(VDC-AN) content. The interaction parameter χ₁₂, obtained from melting point depression analysis, gave the value of −0.267 for the PHB/P(VDC-AN) blends. All results presented in this article lead to the conclusion that PHB/P(VDC-AN) blends are completely miscible in all proportions from a thermodynamic viewpoint. The miscibility in these blends is ascribed to the specific molecular interaction involving the carbonyl groups of PHB. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2645–2652, 1997     

荧光光谱法研究注射用头孢美唑钠与牛血清白蛋白的相互作用

运用荧光光谱法研究了注射用头孢美唑钠(Cefmetazole Sodium,CS)与牛血清白蛋白(BSA)的相互作用.CS对BSA具有荧光猝灭作用,其猝灭方式为静态猝灭,求出了猝灭常数,结合常数及结合位点数.在297 K和311 K时用Stern-Volmer方程和热力学方程处理实验数据,得到了结合常数KA、热力学参数...     

Thermodynamic analysis on the cononsolvency of poly (vinyl alcohol) in water–DMSO mixtures through the ternary interaction parameter

Isothermal phase diagrams for the semicrystalline poly (vinyl alcohol) (PVA) in solutions composed of water and dimethylsulfoxide (DMSO) was studied at 25 °C. From the observed phase behavior, PVA was soluble in either water or DMSO individually but crystallization-induced gelation and liquid–liquid demixing were observed in water–DMSO mixtures. Flory–Huggins formalism including three binary interaction parameters and one ternary interaction parameter was used to study the phenomenon of the cononsolvency, i.e. the formation of nonsolvents by mixing two solvents. The equilibrium crystallization line in the DMSO-rich region and the total calculated binodals agreed well with the measured results when a composition-dependent ternary interaction parameter was included into calculations. In contrast, calculations yielded crystallization-induced gelation in the water-rich region, but experiments indicated that PVA remained well dissolved even 1 year after preparation. The discrepancy was explained by the temperature-induced changes in the relative interaction between water and PVA. In addition, the role of the ternary interaction parameter in the cononsolvent ternary polymer systems was discussed. It was found the contribution of the ternary interaction parameter in the cononsolvent system under study is to decline the degree of the cononsolvency. The driving force for cononsolvency is the strong interaction between water and DMSO to form the stable DMSO hydrate to exclude PVA segments in the vicinity of the hydrate.     

聚(丙烯腈-对羟基苯乙烯)与聚碳酸酯及聚四甲基双酚-A碳酸酯的相容性研究

在聚 (丙烯腈 苯乙烯 ) [P(S AN) ]中苯乙烯 (S)苯环的对位引入羟基基团获得聚 (丙烯腈 对羟基苯乙烯 ) [P(AN VPh) ],P(AN VPh)与聚碳酸酯 (PC)体系及P(AN VPh)与聚四甲基双酚 A碳酸酯 (TMPC)体系的相容性实验结果表明 ,由于对羟基苯乙烯 (VPh)的引入 ,使体系中同时存在“分子间特殊相互作用”和“分子内排斥性相互作用”两种效应 ,从而使体系的相容性获得改善 .P(AN VPh)共聚物中AN的摩尔百分含量在 12 3%～ 4 9 5 %范围内时 ,P(AN VPh) PC共混物体系为热力学均相体系 ,采用TMPC替代PC与P(AN VPh)共混时 ,共聚物中AN的摩尔百分含量在 0～ 5 8 9mol%范围内TMPC P(AN VPh)共混物体系为热力学相容体系 .通过Flory Huggins平均场理论计算与拟合所获得的相容窗口相图与实验值较为吻合 ,同时获得相互作用参数χTMPC -VPh=- 0 19.     

甲酰胺溶剂中溶质间的过量Gibbs自由能相互作用参数

利用气液色谱方法测定了２９８．１５Ｋ时若干非电解质溶质在甲酰胺－乙酰胺、甲酰胺－尿素、甲酰胺－高氯酸钠固定液中的保留参数，采用ＭｃＭｉｌａａｎ－Ｍａｙｅｒ理论，将溶液热力学过量性质与溶液中粒子的对相互作用，参相互作用参数相联系，利用热力学方法求得了溶质的保留参数与Ｇｉｂｌｓ自由能相互作用参数的关系，并就溶质－溶质间的相互作用及溶剂性质的影响进行了讨论。     

Thermodynamic parameters of interaction of HC1 with alcohols in water Ⅲ.HCl-ethanol-water system at 278.15-318.15 K

Pt,H2(g,p0)HCl(mE)|AgCl-AgPt, H2(g, p0)|HCl(mE), EtOH(mN)|AgCl-Ag have been measured at 10 degree intervals from 278.15 to 318.15 K, where EtOH refers to ethanol, mE=0.005-0.1 mol.kg-1, mN=0.4-1.0 mol.kg-1. The salting constant kS of EtOH by HCl and the thermodynamic parameters of interaction, fEN(gEN> hEN, sEN] cP,EN)> of EtOH with HCI in water have been evaluated. It has been shown that kS>0, gEN>0,hEN>0, SEN>0 ,and cp,EN<0.The signs of these parameters and the temperature dependence of them have been discussed on the basis of structural interaction and the group additivity models.     

Interaction of Fluorescein with Felodipine: A Spectrofluorometric and Thermodynamic Study

The interaction between fluorescein and felodipine (FLD) was investigated by the spectrofluorometric method. The fluorescence of FLD was quenched by fluorescein and quenching is in accordance with the Stern-Volmer relation. The binding constants of fluorescein with FLD were obtained at different temperatures. The binding constant and number of binding sites at different temperatures were calculated yielding the corresponding thermodynamic parameters ΔS, ΔH and ΔG. The distance r between the donor (FLD) and acceptor (fluorescein) molecules was obtained according to the fluorescence resonance energy transfer. The optimum conditions for the fluorometric determination of fluorescein were studied and the quenching method was successfully applied to estimate the fluorescein concentration of the pharmaceutical sample directly.     

层柱粘土吸附甲烷的模拟和参数优化研究

用巨正则系综Monte Carlo方法(GCMC)来模拟ZrO₂柱撑粘土对天然气主要成分甲烷的吸附. 为了更好地反映甲烷与层柱粘土无机层板的相互作用, 对墙势模型中的尺寸参数σ_fw和能量参数ε_fw取值进行了优化. 我们系统地改变甲烷在蒙脱土晶体结构中的位置, 建立起一系列甲烷与层板相互作用的Lennard-Jones势能曲线, 通过最小二乘法拟合这些Lennard-Jones势能曲线得到一系列的σ_fw和ε_fw值, 利用拟合得到的σ_fw和ε_fw算术平均值作为墙势模型中两个交互作用参数的取值进行分子模拟, 模拟结果与文献实验值符合较好. 在此基础上, 进一步模拟了3种不同孔率, 层间距为0.64 nm的ZrO₂柱撑粘土(ZPC)在245 K下对临界态甲烷的吸附, 发现 3～4 MPa是ZPC材料吸附甲烷较适合的压力范围, 而且孔率大的ZPC有利于甲烷的吸附.