CdSe quantum dots as luminescent probes for spironolactone determination

Based on the quenching of the fluorescence of CdSe quantum dots (QDs) by spironolactone, a simple, rapid and specific method for spironolactone determination was proposed. In the optimum conditions, spironolactone concentration versus quantum dot fluorescence gave a linear response with an excellent 0.997 correlation coefficient, between 2.5 and 700 mg/mL (6.0-1680 μmol/L) and the limit of detection (S/N = 3) was 0.2 μg/mL (0.48 μmol/L). The contents of spironolactone in pharmaceutical tablets were determined by the proposed method and the results agreed with the claimed values. The possible mechanism for the reaction was also discussed.     

Thermal degradation mechanism of poly(ethylene succinate) and poly(butylene succinate): Comparative study

Two aliphatic polyesters that consisted from succinic acid, ethylene glycol and butylene glycol, —poly(ethylene succinate) (PESu) and poly(butylene succinate) (PBSu)—, were prepared by melt polycondensation process in a glass batch reactor. These polyesters were characterized by DSC, ¹H NMR and molecular weight distribution. Their number average molecular weight is almost identical in both polyesters, close to 7000 g/mol, as well as their carboxyl end groups (80 eq/10⁶ g). From TG and Differential TG (DTG) thermograms it was found that the decomposition step appears at a temperature 399 °C for PBSu and 413 °C for PESu. This is an indication that PESu is more stable than PBSu and that chemical structure plays an important role in the thermal decomposition process. In both polyesters degradation takes place in two stages, the first that corresponds to a very small mass loss, and the second at elevated temperatures being the main degradation stage. The two stages are attributed to different decomposition mechanisms as is verified from the values of activation energy determined with iso-conversional methods of Ozawa, Flyn, Wall and Friedman. The first mechanism that takes place at low temperatures, is auto-catalysis with activation energy E = 128 and E = 182 kJ/mol and reaction order n = 0.75 and 1.84 for PBSu and PESu, respectively. The second mechanism is nth-order reaction with E = 189 and 256 kJ/mol and reaction order n = 0.68 and 0.96 for PBSu and PESu, respectively, as they were calculated from the fitting of experimental results.     

Functionalized cadmium sulfide quantum dots as fluorescence probe for silver ion determination

CdS quantum dots (QDs) modified with l-cysteine has been prepared by one step. They are water-soluble and biocompatible. To improve CdS QDs stability and interaction between silver ion and functionalized CdS QDs in aqueous solution, some amounts of fresh l-cysteine were added to functionalized CdS solution. Based on the characteristic fluorescence enhancement of CdS QDs at 545 nm by silver ions in the presence of some amounts of fresh l-cysteine, simultaneously, a gradual red shift of fluorescence emission bands of CdS QDs from 545 to 558 nm was observed. A simple, rapid, sensitive and specific detection method for silver ion was proposed. Under optimum conditions, the fluorescence intensity of CdS QDs is linearly proportional to silver concentration from 2.0 × 10⁻⁸ to 1.0 × 10⁻⁶ mol/L with a detection limit of 5.0 × 10⁻⁹ mol/L. In comparison with single organic fluorophores, functionalized CdS quantum dots are brighter, more stable against photobleaching, and don’t suffer from blinking. Furthermore, owing to the fluorescence enhancement effect of CdS QDs by silver ion, the proposed method showed lower detection blank and higher sensitivity. Possible fluorescence enhancement mechanism was also studied.     

ZnS quantum dots derived a reagentless uric acid biosensor

A reagentless amperometric uric acid biosensor based on zinc sulfide (ZnS) quantum dots (QDs) was firstly developed. It could detect uric acid without the presence of an electron mediator. The carboxyl group functionalized ZnS QDs were synthesized, and they were soluble biocompatible and conductive. ZnS QDs conjugates could provide increased enzyme binding sites, which may result in higher enzyme loading. Thus, the proposed uricase/ZnS QDs/l-cys biosensor exhibited higher amperometric response compared to the one without QDs (uricase/l-cys biosensor). In addition, there was little AA interference. It showed a linear dependence on the uric acid concentration ranging from 5.0 × 10⁻⁶ to 2.0 × 10⁻³ mol L⁻¹ with a detection limit of 2.0 × 10⁻⁶ mol L⁻¹ at 3σ.     

In situ formation of p–n junction: A novel principle for photoelectrochemical sensor and its application for mercury(II) ion detection

The discovery and development of photoelectrochemical sensors with novel principles are of great significance to realize sensitive and low-cost detection. In this paper, a new photoelectrochemial sensor based on the in situ formation of p–n junction was designed and used for the accurate determination of mercury(II) ions. Cysteine-capped ZnS quantum dots (QDs) was assembled on the surface of indium tin oxide (ITO) electrode based on the electrostatic interaction between Poly(diallyldimethylammonium chloride) (PDDA) and Cys-capped ZnS QDs. The in situ formation of HgS, a p-type semiconductor, on the surface of ZnS facilitated the charge carrier transport and promoted electron-hole separation, triggered an obviously enhanced anodic photocurrent of Cys-capped ZnS QDs. The formation of p–n junction was confirmed by P–N conductive type discriminator measurements and current–voltage (I–V) curves. The photoelectrochemical method was used for the sensing of trace mercuric (II) ions with a linear concentration of 0.01 to 10.0 µM and a detection limit of 4.6 × 10⁻⁹ mol/L. It is expected that the present study can serve as a foundation to the application of p–n heterojunction to photoelectrochemical sensors and it might be easily extended to more exciting sensing systems by photoelectrochemistry.     

Fluorometric method for the determination of hydrogen peroxide and glucose with Fe3O4 as catalyst

In this paper, we utilized the instinct peroxidase-like property of Fe₃O₄ magnetic nanoparticles (MNPs) to establish a new fluorometric method for determination of hydrogen peroxide and glucose. In the presence of Fe₃O₄ MNPs as peroxidase mimetic catalyst, H₂O₂ was decomposed into radical that could quench the fluorescence of CdTe QDs more efficiently and rapidly. Then the oxidization of glucose by glucose oxidase was coupled with the fluorescence quenching of CdTe QDs by H₂O₂ producer with Fe₃O₄ MNPs catalyst, which can be used to detect glucose. Under the optimal reaction conditions, a linear correlation was established between fluorescence intensity ratio I₀/I and concentration of H₂O₂ from 1.8 × 10⁻⁷ to 9 × 10⁻⁴ mol/L with a detection limit of 1.8 × 10⁻⁸ mol/L. And a linear correlation was established between fluorescence intensity ratio I₀/I and concentration of glucose from 1.6 × 10⁻⁶ to 1.6 × 10⁻⁴ mol/L with a detection limit of 1.0 × 10⁻⁶ mol/L. The proposed method was applied to the determination of glucose in human serum samples with satisfactory results.     

Size-dependent electrochemiluminescence behavior of water-soluble CdTe quantum dots and selective sensing of l-cysteine

Water-soluble CdTe quantum dots (QDs) with five sizes (2.25, 2.50, 2.77, 3.12, and 3.26 nm) were synthesized with the hydrothermal method. The electrochemiluminescence (ECL) of CdTe QDs was investigated in detail in air-saturated solution without adding foreign oxidant. It was found that the ECL of CdTe QDs displayed a size-dependent property. With the increasing in the particle size of the CdTe QDs, the ECL intensity was gradually increased, in addition, both ECL peak potentials and ECL onset potentials of CdTe QDs were shifted positively. Influences of some factors on the ECL intensity were investigated. Under the optimal conditions, the ECL intensity had a linear relationship with the concentration of l-cysteine (l-Cys) in the range from 1.3 × 10⁻⁶ to 3.5 × 10⁻⁵ mol L⁻¹ (R² 0.996) with a detection limit of 8.7 × 10⁻⁷ mol L⁻¹ (S/N = 3). The proposed method was applied to the determination of l-Cys in real samples with satisfactory results. Compared with previous reports, it has better selectivity for the determination of l-Cys.     

A potential visual fluorescence probe for ultratrace arsenic (III) detection by using glutathione-capped CdTe quantum dots

The interaction between mercaptoacetic acid (MA)-capped CdTe QDs, MA-capped CdTe/ZnS QDs or glutathione (GSH)-capped CdTe QDs with As(III) was studied using fluorescence spectrometry. As (III) has a high-affinity to reduced-GSH to form As(SG)₃, and the emission of the GSH-capped CdTe QDs (λ_em. = 612 nm) is quenched effectively. Thus, a novel fluorescence spectrometric method was developed for As (III) determination by using GSH-CdTe QDs. Under optimal conditions, the quenched fluorescence intensity (F₀/F) increased linearly with the concentration of As (III) ranging from 5.0 × 10⁻⁶ to 25 × 10⁻⁵ mol L⁻¹. The limit of detection (3σ) for As (III) was found to be 2 × 10⁻⁸ mol L⁻¹. This method is potentially useful in visual detection of As (III) under irradiation of the ultraviolet light.     

Immuno-capture and in situ detection of Salmonella typhimurium on a novel microfluidic chip

The new method presented in this article achieved the goal of capturing Salmonella typhimurium via immunoreaction and rapid in situ detection of the CdSe/ZnS quantum dots (QDs) labeled S. typhimurium by self-assembly light-emitting diode-induced fluorescence detection (LIF) microsystem on a specially designed multichannel microfluidic chip. CdSe/ZnS QDs were used as fluorescent markers improving detection sensitivity. The microfluidic chip developed in this study was composed of 12 sample channels, 3 mixing zones, and 6 immune reaction zones, which also acted as fluorescence detection zones. QDs–IgG–primary antibody complexes were generated by mixing CdSe/ZnS QDs conjugated secondary antibody (QDs–IgG) and S. typhimurium antibody (primary antibody) in mixing zones. Then, the complexes went into immune reaction zones to label previously captured S. typhimurium in the sandwich mode. The capture rate of S. typhimurium in each detection zone was up to 70%. The enriched QDs-labeled S. typhimurium was detected using a self-assembly LIF microsystem. A good linear relationship was obtained in the range from 3.7 × 10 to 3.7 × 10⁵ cfu mL⁻¹ using the equation I = 0.1739 log (C) − 0.1889 with R² = 0.9907, and the detection limit was down to 37 cfu mL⁻¹. The proposed method of online immunolabeling with QDs for in situ fluorescence detection on the designed multichannel microfluidic chip had been successfully used to detect S. typhimurium in pork sample, and it has shown potential advantages in practice.     

Fluorescence detection of total count of Escherichia coli and Staphylococcus aureus on water-soluble CdSe quantum dots coupled with bacteria

The aim of this paper was to demonstrate a fluorescence measurement method for rapid detection of two bacterial count by using water-soluble quantum dots (QDs) as a fluorescence marker, and spectrofluorometer acted as detection apparatus, while Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were as detection target bacteria. Highly luminescent water-soluble CdSe QDs were first prepared by using thioglycolic acid (TGA) as a ligand, and were then covalently coupled with target bacteria. The bacterial cell images were obtained using fluorescence microscopy. Our results showed that CdSe QDs prepared in water phase were highly luminescent, stable, and successfully conjugated with E. coli and S. aureus. The fluorescence method could detect 10²-10⁷ CFU/mL total count of E. coli and S. aureus in 1-2 h and the low detection limit is 10² CFU/mL. A linear relationship of the fluorescence peak intensity and log total count of E. coli and S. aureus have been established using the equation Y = 118.68X − 141.75 (r = 0.9907).     

Thermal degradation kinetics of the biodegradable aliphatic polyester, poly(propylene succinate)

The preparation of the biodegradable aliphatic polyester poly(propylene succinate) (PPSu) using 1,3-propanediol and succinic acid is presented. Its synthesis was performed by two-stage melt polycondensation in a glass batch reactor. The polyester was characterized by gel permeation chromatography, ¹H NMR spectroscopy and differential scanning calorimetry (DSC). It has a number average molecular weight 6880 g/mol, peak temperature of melting at 44 °C for heating rate 20 °C/min and glass transition temperature at −36 °C. After melt quenching it can be made completely amorphous due to its low crystallization rate. According to thermogravimetric measurements, PPSu shows a very high thermal stability as its major decomposition rate is at 404 °C (heating rate 10 °C/min). This is very high compared with aliphatic polyesters and can be compared to the decomposition temperature of aromatic polyesters. TG and Differential TG (DTG) thermograms revealed that PPSu degradation takes place in two stages, the first being at low temperatures that corresponds to a very small mass loss of about 7%, the second at elevated temperatures being the main degradation stage. Both stages are attributed to different decomposition mechanisms as is verified from activation energy determined with isoconversional methods of Ozawa, Flyn, Wall and Friedman. The first mechanism that takes place at low temperatures is auto-catalysis with activation energy E = 157 kJ/mol while the second mechanism is a first-order reaction with E = 221 kJ/mol, as calculated by the fitting of experimental measurements.     

Synthesis of thermally responsive cylindrical molecular brushes via a combination of nitroxide-mediated radical polymerization and “grafting onto” strategy

Loosely grafted amphiphilic molecular brushes consisting of a hydrophobic polystyrene backbone and hydrophilic poly(ethylene glycol) monomethyl ether (MPEG) side chains, PS-MPEG, were synthesized by a novel two step method. In the first step, well-defined linear poly(p-chloromethylstyrene) PCMS with the degree of polymerization DP ≈ 200 and polydispersity index, M_w/M_n = 1.4 was prepared by bulk nitroxide (TEMPO)-mediated radical polymerization (NMP). In the second step, pendant p-chloromethyl units were coupled with activated chains of poly(ethylene glycol) monomethyl ether (MPEG) during the course of the Williamson etherification reaction. Using MPEG with M_n = 1100 g/mol over 50% repeating units on PCMS underwent nucleophilic substitution yielding a densely grafted brush with theoretical molecular weight M_n,th ≈ 123,000 g/mol. The molecular brush PS-MPEG assumed conformation of a stiff cylinder in both dilute toluene (non-selective good solvent for PS backbone and MPEG grafts) and water (selective for MPEG grafts) solutions as determined by small-angle neutron scattering (SANS) and small-angle X-ray scattering (SAXS). The contour length L = 570 Å and L = 694 Å obtained by fitting the scattering data using model of Sharp-Bloomfield, Pedersen-Schurtenberger and Kholodenko worm revealed dimensions corresponding to theoretically estimated size of a single molecular brush. It was found that PS-MPEG molecular brush in dilute aqueous solutions exhibited lower critical solution temperature (LCST) in the physiological range.     

Synthesis of poly(ethylene adipate) and poly(ethylene adipate-co-terephthalate) via ring-opening polymerization

Syntheses of poly(ethylene adipate) (ROP-PEA) and poly(ethylene adipate-co-terephthalate) (ROP-PEA-co-PET) were achieved via ring-opening polymerization of corresponding cyclic oligoesters. In case of ROP-PEA, cyclic oligo(ethylene adipate) (C-OEA) was equilibrated in the presence of di-n-butyltin oxide as a catalyst under high-concentration conditions at 180 and 200 °C for 1-24 h. The polymer products were obtained in yields up to 100% with the and in the ranges of 3000-23 000 g/mol and 5000-60 000 g/mol, respectively. The ROP-PEA-co-PET was prepared by equilibrating an equimolar amount of C-OEA and cyclic oligo(ethylene terephthalate) (C-OET) using di-n-butyltin oxide catalyst under high-concentration conditions at 250 °C for 24 h. The copolyester produced was obtained in yield of 97% with the and of 18 000 and 46 000 g/mol, respectively. ¹H NMR spectrum of ROP-PEA-co-PET showed two new proton signals of ethylene unit representing the existence of heterolinkage with different chemical environment in the copolymer. This indicated the random transesterification of C-OEA and C-OET resulting in random structure in copolyester. In addition, the result of ROP-PEA-co-PET from DSC showed the glass transition temperature in the values of −8 °C with no melting temperature indicating thermoplastic elastomeric behavior.     

Aqueous solution behavior of p(N-isopropyl acrylamide) in the presence of water-soluble macromolecular species

We report here the polymerization of N-isopropyl acrylamide (NIPAM) via the reversible addition fragmentation chain transfer (RAFT) process. Two trithiocarbonates (S,S′-bis(α,α′-dimethyl-α″-acetic acid)-trithiocarbonate and 2-dodecylsulfanylthiocarbonylsulfanyl-2-methyl propionic acid) were used as the chain transfer agents in conjunction with 4,4′-azobis(4-cyanovaleric acid) and 2,2′azobis(2-methylpropionamidine) dihydrochloride as the initiating species. Poly(NIPAM) is a thermo-responsive polymer that has a sharp lower critical solution temperature (LCST). Herein, we investigated the aqueous solution behaviour of well defined p(NIPAM) prepared by the RAFT process as a function of molecular weight (degree of polymerization: 50, 100 and 200) and temperature. Furthermore, we examine the influence of varying concentrations of macromolecular species (neutral polyethylene glycol (M_n - 3400 g/mol) and ionic bovine serum albumin (M_n - 63 000 g/mol)) on the LCST of p(NIPAM). The aqueous solution behaviour was assessed by spectrophotometry, dynamic light scattering and surface tensiometry. The macromolecular additives was found to have a significant effect on the coil to globular transition of the lower molecular weight p(NIPAM).     

Solubilities of cholesterol and desmosterol in binary solvent mixtures of n-hexane + ethanol

The solubilities of cholesterol and desmosterol in binary solvent mixtures of n-hexane + ethanol at temperatures of 293.2–323.2 K were determined by a static equilibrium method. The solubilities increase with temperature and go through a maximum at a specific solvent composition. The fusion enthalpy Δ_fusH and the melting point T_m, determined by differential scanning calorimeter (DSC), are 28.5 kJ/mol, 421.7 K for cholesterol and 15.9 kJ/mol, 388.2 K for desmosterol, respectively. The solubilities of cholesterol and desmosterol in pure n-hexane or ethanol follow a linear Van’t Hoff relation with temperature. Activity models, such as Wilson, NRTL and UNIQUAC models were used to correlate and predict the solubilities of cholesterol and desmosterol in n-hexane + ethanol mixed solvents. The interaction parameters were expressed as a function of temperature.     

Fluorescence enhancement of CdTe/CdS quantum dots by coupling of glyphosate and its application for sensitive detection of copper ion

A novel fluorescent probe for Cu²⁺ determination based on the fluorescence quenching of glyphosate (Glyp)-functionalized quantum dots (QDs) was firstly reported. Glyp had been used to modify the surface of QDs to form Glyp-functionalized QDs following the capping of thioglycolic acid on the core–shell CdTe/CdS QDs. Under the optimal conditions, the response was linearly proportional to the concentration of Cu²⁺ between 2.4 × 10⁻² μg mL⁻¹ and 28 μg mL⁻¹, with a detection limit of 1.3 × 10⁻³ μg mL⁻¹ (3δ). The Glyp-functionalized QDs fluorescent probe offers good sensitivity and selectivity for detecting Cu²⁺. The fluorescent probe was successfully used for the determination of Cu²⁺ in environmental samples. The mechanism of reaction was also discussed.     

Highly-controllable imprinted polymer nanoshell at the surface of silica nanoparticles based room-temperature phosphorescence probe for detection of 2,4-dichlorophenol

This paper reports a facile and general method for preparing an imprinted polymer thin shell with Mn-doped ZnS quantum dots (QDs) at the surface of silica nanoparticles by stepwise precipitation polymerization to form the highly-controllable core–shell nanoparticles (MIPs@SiO₂–ZnS:Mn QDs) and sensitively recognize the target 2,4-dichlorophenol (2,4-DCP). Acrylamide (AM) and ethyl glycol dimethacrylate (EGDMA) were used as the functional monomer and the cross-linker, respectively. The MIPs@SiO₂–ZnS:Mn QDs had a controllable shell thickness and a high density of effective recognition sites, and the thickness of uniform core–shell 2,4-DCP-imprinted nanoparticles was controlled by the total amounts of monomers. The MIPs@SiO₂–ZnS:Mn QDs with a shell thickness of 45 nm exhibited the largest quenching efficiency to 2,4-DCP by using the spectrofluorometer. After the experimental conditions were optimized, a linear relationship was obtained covering the linear range of 1.0–84 μmol L⁻¹ with a correlation coefficient of 0.9981 and the detection limit (3σ/k) was 0.15 μmol L⁻¹. The feasibility of the developed method was successfully evaluated through the determination of 2,4-DCP in real samples. This study provides a general strategy to fabricate highly-controllable core–shell imprinted polymer-contained QDs with highly selective recognition ability.     

Synthesis and properties of segmented block copolymers based on mixtures of poly(ethylene oxide) and poly(tetramethylene oxide) segments

The synthesis and characterisation of segmented block copolymers based on mixtures of hydrophilic poly(ethylene oxide) and hydrophobic poly(tetramethylene oxide) polyether segments and monodisperse crystallisable bisester tetra-amide segments are reported. The PEO length was varied from 600 to 8000 g/mol and the PTMO length was varied from 650 to 2900 g/mol. The influence of the polyether phase composition on the thermal mechanical and the elastic properties of the resulting copolymers was studied.The use of high melting monodisperse tetra-amide segments resulted in a fast and almost complete crystallisation of the rigid segment. The copolymers had only one polyether glass transition temperature, which suggests that the amorphous polyether segments were homogenously mixed. Thermal analysis of the copolymers showed one polyether melting temperature that was lower than in the case of ideal co-crystallisation between the two polyether segments. However, at PEO or PTMO lengths larger than 2000 g/mol two polyether melting temperatures were observed. The copolymer with the best low temperature properties was based on a mixture of PEO and PTMO segments, both having a molecular weight of 1000 g/mol, at a weight ratio of 30/70.     

Ultrasensitive determination of 1,4-dihydroxybenzene based on fluorescence resonance energy quenching of luminescent quantum dots modified on surface of silica nanoparticles

An ultrasensitive solid-phase fluorescence resonance energy quenching (FREQ) method for determination of 1,4-dihydroxybenzene (DHB) using mercaptosuccinic acid (MSA)-capped CdTe quantum dots (QDs) immobilized on silica nanoparticles (NPs) as donors was developed. In the method, silica NPs were first modified with 3-aminopropyltriethoxysilane (APTS). Then, MSA-capped CdTe QDs were immobilized on the surface of the APTS-modified silica NPs. Finally, DHB in the solution was attached to the empty sites on the surface of silica NPs with QDs through electrostatic interaction. The fluorescence emission of the QDs was quenched by the proximal DHB molecules on the silica NPs. The quenching efficiency of the solid-phase FREQ method was 200-times higher than that of the solution-phase FREQ method. Using the ultrasensitive solid-phase FREQ method, DHB as low as 2.4 × 10⁻¹² mol/L could be detected. The method was applied to quantify trace DHB in water samples.     

Surface-modified CdSe quantum dots as luminescent probes for cyanide determination

Luminescent surface-modified CdSe semiconductor quantum dots (QDs), with nanoparticle (NP) size distribution in the order of 2-7 nm, have been synthesized for optical determination of cyanide ions. The nanoparticles have been functionalised with tert-butyl-N-(2-mercaptoethyl)-carbamate (BMC) groups and exhibit a strong fluorescent emission at about 580 nm with rather long fluorescence lifetimes (several hundred nanoseconds) in aerated methanolic solution. The observed luminescence emitted by the synthesized nanocrystals was tremendously increased by photo-activation under sunlight exposure. The functionalised QDs turned out to exhibit excellent long-term stability when stored in the dark (no significant changes in QDs luminescence emission intensity was observed even after two months from synthesis). The functionalisation of the NPs with carbamate ligand allowed a highly sensitive determination of free cyanide via analyte-induced changes in the photoluminescence (fluorescence quenching of intensity at 580 nm and lifetime changes) of the modified quantum dots (excited at 400 nm). A detection limit of 1.1 × 10⁻⁷ M (2.9 μg l⁻¹) of cyanide ions was obtained, while the interfering effect of other inorganic anions (including NO₃⁻, Cl⁻ or SCN⁻) was negligible even at 200-fold level concentrations in excess of cyanide.