四氟乙烯齐聚体的反应 四氟乙烯四、五聚体和芳香胺的反应

前已报道四氟乙烯四聚体(全氟-3,4-甲基己烯-3)(1)、五聚体(全氟-3,4-二甲基-4-乙基己烯-2)(2)和脂肪烷氧以及脂肪胺的亲核反应.本文报道化合物1,2和芳香胺如苯胺、β-萘胺的反应.由于烯烃1、2双键处于分子中间,因而当亲核试剂进攻时,双键容易发生重排,生成的末端基烯烃更具反应性,故导致一取代、二取代、三取代以及环化降解等复杂产物.     

分子动力学模拟研究纳米碳管中甲醇-水混合溶液的结构与输运性质

利用分子动力学模拟方法,对比考察了平衡条件、外压作用、梯度电场作用下,摩尔比为1:1的甲醇-水混合溶液在纳米碳管(CNT)中的静态结构以及输运行为.研究发现:在平衡体系与外压作用下,纳米碳管内甲醇与水呈现出明显的不混溶现象,甲醇主要分布于管壁附近,水分子主要分布于纳米碳管轴心附近;而在梯度电场作用下,纳米碳管由疏水性向亲水性转变,更多的水分子分布于管壁,导致纳米碳管内甲醇-水的不混溶现象消失.另一方面,在外压作用下,纳米碳管内甲醇与水呈现单向移动;而在梯度电场下,甲醇与水呈现快速的双向移动,其流通量较相应外压作用体系高出近一个数量级,但由于双向的流通量大小相近,导致净流通量与外压作用下的净流通量差异不大.     

分子动力学模拟研究纳米碳管中甲醇-水混合溶液的结构与输运性质

利用分子动力学模拟方法,对比考察了平衡条件、外压作用、梯度电场作用下,摩尔比为1：1 的甲醇-水混合溶液在纳米碳管（CNT）中的静态结构以及输运行为. 研究发现：在平衡体系与外压作用下,纳米碳管内甲醇与水呈现出明显的不混溶现象,甲醇主要分布于管壁附近,水分子主要分布于纳米碳管轴心附近;而在梯度电场作用下,纳米碳管由疏水性向亲水性转变,更多的水分子分布于管壁,导致纳米碳管内甲醇-水的不混溶现象消失. 另一方面,在外压作用下,纳米碳管内甲醇与水呈现单向移动;而在梯度电场下,甲醇与水呈现快速的双向移动,其流通量较相应外压作用体系高出近一个数量级,但由于双向的流通量大小相近,导致净流通量与外压作用下的净流通量差异不大.     

Coaxially bifocal liquid crystal lens with switchable optical aperture

An electrically tunable liquid crystal (LC) lens with dual hole-patterned electrodes is demonstrated. When the LC lens is operated at low voltages, the dual hole-patterned electrodes with different diameters impart the lens with a coaxial bifocal characteristic. At high voltages, the proposed LC lens functions as a conventional lens with a single focal length but with a switchable optical aperture. The demonstrated LC lens is free of disclination lines because of the presence of voltage-assisted high pretilt angles created from the upmost hole-patterned electrode with small diameter.     

Peptide peak intensities enhanced by cysteine modifiers and MALDI TOF MS

Two cysteine‐specific modifiers we reported previously, N‐ethyl maleimide (NEM) and iodoacetanilide (IAA), have been applied to the labeling of cysteine residues of peptides for the purpose of examining the enhancement of ionization efficiencies in combination with matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI TOF MS). The peak intensities of the peptides as a result of modification with these modifiers were compared with the peak intensities of peptides modified with a commercially available cysteine‐specific modifier, iodoacetamide (IA). Our experiments show significant enhancement in the peak intensities of three cysteine‐containing synthetic peptides modified with IAA compared to those modified with IA. The results showed a 4.5–6‐fold increase as a result of modification with IAA compared to modification with IA. Furthermore, it was found that IAA modification also significantly enhanced the peak intensities of many peptides of a commercially available proteins, bovine serum albumin (BSA), compared to those modified with IA. This significant enhancement helped identify a greater number of peptides of these proteins, leading to a higher sequence coverage with greater confidence scores in identification of proteins with the use of IAA. Copyright © 2012 John Wiley & Sons, Ltd.     

Solid-phase synthesis of 5-arylhistidines via a microwave-assisted Suzuki-Miyaura cross-coupling

Microwave irradiation efficiently promoted the solid-phase Suzuki-Miyaura reaction of a 5-bromohistidine with various arylboronic acids in the presence of a palladium catalyst. This methodology allowed the synthesis of peptides bearing a histidine residue substituted at position 5 of the imidazole ring with a phenyl, a substituted phenyl, a pyridyl, or a thienyl ring, as well as with the benzene ring of a tyrosine residue.     

On the Donor Ability of the Phosphaneiminato Substituent and Cube Formation with Transition Metal Fragments

The particular role of the phosphaneiminato ligand as a donor is investigated for a) nitrenes (phosphinidenes) and carbenes and b) cubane formation with transition metals. Accordingly, and as shown for the case a) the ligand is a stronger π‐donor than an amino group and can be considered as a special case of imine‐type substituents. The latter are very effective in π‐donation. In the case b), i.e. the cubane formation with transition metals, one has to consider transition metals with a partially or completely filled d‐shell (with electrons). Hence depending on the transition metal, cubanes are build with weak ferromagnetic coupled or closed shell systems. For the cubanes with closed shell character the matter of insertion of halide anions is discussed. In the last chapter of the review the bond stretching in the dithionitrosyl complexes with rhenium is characterized.     

STUDY ON A HYDROPHOBIC-HYDROPHILIC GRADIENT ROD

INTRODUCTIONGradient materials constitute a special case of various materials. The concentration of one of the components ofthe material, being chemically and/or physically different from other components, is allowed to change as afunction of its position in the sample, producing a predetermined gradient profile. The gradient material can be inany shape — i.e., linear, sigmoid, parabolic, flat or rod. Generally, this kind of material should have gradientsalong one direction in their stru…     

Ring-opening cross-metathesis (ROCM) as a novel tool for the ligation of peptides

The development of ring-opening cross-metathesis (ROCM) as a novel tool for the site-specific ligation of peptide units is reported. The resulting structural units at the site of ligation resulting from ROCM resemble proline as well as other known beta-turn stabilising structural units. ROCM under mild reaction conditions between a variety of peptides bearing a cyclic olefin with amino acids or peptides results in high yields. The peptidic cross-partners for metathesis are equipped with double bonds via the N and the C terminus and the side chain, respectively, to allow the synthesis of linear as well as non-linear and branched peptides. The ligation in this manner succeeds with low catalyst loadings, with no need for any excess of one reaction partner and with a high compatibility with a wide range of functional groups. Furthermore, the stereochemical outcome of the ROCM can easily be controlled by using a Hoveyda-type chiral catalyst. Fluorescence labelling of peptides is possible in the same manner when using a cyclic olefin equipped with a fluorescence marker.     

Kinetics of vesicle formation

 The kinetics of vesicle formation from a hydrotrope (sodium xylenesulfonate) solution of a surfactant (Laureth 4) is studied by the use of a stopped-flow apparatus combined with a dynamic light scattering device to determine vesicle size in the system. The hydrotrope system studied presents a system with a high surfactant solubilization combined with vesicle formation simply by dilution with water. The kinetic results show a single exponential decay time. The kinetic analysis indicates that the vesicles are formed from a molecular solution which resulted from the shear in the stopped-flow device and grow by monomeric association. Received: 1 October 1996 Accepted: 22 November 1996     

Beta-cyclodextrin-appended giant amphiphile: aggregation to vesicle polymersomes and immobilisation of enzymes

A giant amphiphile consisting of polystyrene end-capped with permethylated beta-cyclodextrin was synthesised and found to form vesicular structures when injected as a solution in THF into water. The ability of the cyclodextrins on the surface of the polymersomes to form inclusion complexes with hydrophobic compounds was tested by carrying out a competition experiment with a fluorescent probe sensitive to the polarity of the surrounding medium. It was found that 1-adamantol can displace the fluorescent probe from the cavities of the cyclodextrin moieties of the polymersomes. The recognition of molecules by cell membranes in nature is often based on interactions with specific membrane receptors. To mimic this behaviour, the enzyme horseradish peroxidase was modified with adamantane groups through a poly(ethylene glycol) spacer and its interaction with the polymersomes was investigated. It was established that the presence of adamantane moieties on each enzyme allowed a host-guest interaction with the multifunctional surface of the polymersomes.     

Synthesis and photochemistry of side-chain liquid crystal polymers based on cinnamate esters

The syntheses of three methacrylate monomers with cinnamate ester side-chains and of a further monomer with a corresponding cinnamide side-chain are described. Two of the monomers, with isomeric structures, were thermotropic liquid crystals. Although the clearing points were very similar the crystal melting points differed by 8°C. One compound also exhibited a monotropic smectic phase, behavior not shown by its isomer. The other two monomers were not liquid crystalline. The monomers were polymerized by free radical polymerization, both as homopolymers and as copolymers with methyl methacrylate. In the case of one of the mesogenic ester monomers, copolymers with a cyanophenyl benzoate monomer were also prepared. Three of the four monomers formed thermotropic liquid crystalline homopolymers and the copolymers with the benzoate monomer were also liquid crystalline. The monomers were considered as photoactive components of polymeric liquid crystals. As a preliminary investigation of their photochemistry, copolymers with methyl methacrylate were prepared and irradiated in solution with a broad-band source. Under these conditions two of the materials show a facile photo-Fries rearrangement of the aryl cinnamate ester group. © 1992 John Wiley & Sons, Inc.     

BAB‐random‐C Monomer Sequence via Radical Terpolymerization of Limonene (A), Maleimide (B), and Methacrylate (C): Terpene Polymers with Randomly Distributed Periodic Sequences

A naturally abundant terpene, limonene (A), was radically polymerized with a maleimide derivative (B) and methacrylate (C) in a fluorinated alcohol to give terpolymers with unprecedented BAB‐random‐C sequences in which the BAB monomer sequence was randomly copolymerized with a C unit. In each binary system, limonene was hardly copolymerized with methacrylate while it was efficiently copolymerized with maleimide to result in a 1:2‐alternating BAB periodic sequence, in part due to the penultimate effects and hydrogen‐bonding interactions with fluoroalcohol. Methacrylate and maleimide were randomly copolymerized to give copolymers rich in methacrylate units with minimal amounts of maleimide–maleimide sequences. Their terpolymerization resulted in a BAB‐r‐C sequence as a consequence of the selective BAB polymerization between limonene and maleimide, the random copolymerization between methacrylate and maleimide, and the lack of copolymerization between limonene and methacrylate.     

Biology-oriented synthesis of stereochemically diverse natural-product-derived compound collections by iterative allylations on a solid support

A strategy aiming at the introduction of stereocenters into polymer-bound natural-product-derived and -inspired compound collections is presented. Treatment of immobilized aldehydes with Brown's pinene-derived allylboranes results in the stereoselective formation of homoallylic alcohols with up to 89 % ee (ee=enantiomeric excess). Subsequent iterative ozonolysis-allylation sequences with up to three allylations on a solid support give access to 1,3-polyols with different relative configurations. Esterification with acryloyl chloride and final ring-closing metathesis yields alpha,beta-unsaturated delta-lactones with multiply oxygenated side chains, a substructure found in a group of natural products with a broad range of biological activity. The flexibility of the approach is exemplified by the parallel synthesis of all eight diastereomers of cryptocarya diacetate on a solid support. The individual isomers are obtained in overall yields of 40-60 % over 10 steps and with 63-85 % diastereoselectivity for the major isomer.     

Electrochemical Detection Using an Engraved Microchip – Capillary Electrophoresis Platform

The present study describes a simple strategy to integrate electrochemical detection with an assembled microchip‐capillary electrophoresis platform. The electrochemical cell was integrated with a microfluidic device consisting of five plastic squares interconnected with fused silica capillaries, forming a four‐way injection cross between the separation channel and three side‐arms (each of 15 mm in length) acting as buffer/sample reservoirs. The performance of the system was evaluated using electrodes made with either carbon ink, carbon nanotubes, or gold and under different experimental conditions of pH, capillary length, and injection time. Using this system it was possible to separate the neurotransmitters dopamine and cathecol and to quantify phenol from a real sample using a linear calibration curve with a calculated LOD of 0.7 µM. A similar concept was applied to determine glucose, by including a pre‐reactor filled with beads modified with glucose oxidase (GOx). The latter system was used to determine glucose in a commercial sample, with a recovery of 95.2 %. Overall, the presented approach represents a simple, inexpensive, and versatile approach to integrate electrochemical detection with CE separations without requiring access to microfabrication facilities.     

Superiority of a new gradient system utilizing a critical threshold for the adsorption capacity of polypeptides to column packing when compared with a standard gradient system for the simultaneous and quantitative analysis of polypeptides

Compared with a standard gradient system, the new gradient system which we developed has a major advantage because it permits a wide range of acetonitrile content, e.g. more than the critical threshold, in the polypeptide solution and allows the quantitative analysis of the polypeptide with satisfactory analytical precision. Additionally, this new gradient system allows the enhancement of the sensitivity of the polypeptide analysis proportionate to the increased volume of solution loaded with the same levels of precision. In contrast, when using a standard gradient system it is difficult to analyze a polypeptide quantitatively with good precision due to either adsorption to various materials or to irregular change in the ratio between a retained and a passed peak of the polypeptide. Additionally, the appearance of a passed peak results in a loss in the sensitivity of the polypeptide analysis, although no adsorption of a polypeptide to various materials occurs in a solution with acetonitrile content more than the critical threshold. Consequently, the new gradient system is effective for the simultaneous and quantitative analysis of different polypeptides with good precision and without any loss of sensitivity due to either adsorption to various materials or the appearance of a passed peak.     

Comparison of Bifurcated Halogen with Hydrogen Bonds

Bifurcated halogen bonds are constructed with FBr and FI as Lewis acids, paired with NH₃ and NCH bases. The first type considered places two bases together with a single acid, while the reverse case of two acids sharing a single base constitutes the second type. These bifurcated systems are compared with the analogous H-bonds wherein FH serves as the acid. In most cases, a bifurcated system is energetically inferior to a single linear bond. There is a larger energetic cost to forcing the single σ-hole of an acid to interact with a pair of bases, than the other way around where two acids engage with the lone pair of a single base. In comparison to FBr and FI, the H-bonding FH acid is better able to participate in a bifurcated sharing with two bases. This behavior is traced to the properties of the monomers, in particular the specific shape of the molecular electrostatic potential, the anisotropy of the orbitals of the acid and base that interact directly with one another, and the angular extent of the total electron density of the two molecules.     

Multinuclear cobalt–salen complexes with phenylene linker for epoxide polymerizations

Di‐ and trinuclear cobalt (Co)–salen complexes with a benzene ring as a rigid linker were explored for epoxide polymerizations. The dinuclear Co–salen complex with a 1,2‐phenylene linker showed higher catalytic activity than the dinuclear Co–salen complex with a 1,3‐phenylene linker and the trinuclear Co–salen complex with a 1,3,5‐benzenetriyl linker for the copolymerization of propylene oxide (PO) with carbon dioxide. A combination of the absolute configuration of the two Co–salen moieties was found to affect its catalytic activity. The optimized dinuclear Co–salen complex with a heterochiral combination demonstrated highest activity and maintained its catalytic activity under a low catalyst concentration. The heterochiral dinuclear Co–salen complex also showed high activity for the copolymerization of PO with cyclic anhydride. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2150–2159     

CHLOROSULFONATION OF SOME CRISSCROSS CYCLOADDUCTS FROM ISOCYANATES AND DIARYL AZINES

Abstract

Reaction of chlorosulfonyl isocyanate (1) with arylaldehyde azines (7) gave the 2:1 crisscross adducts (8);attempts to prepare a disulphonamide of 8a gave only a mixture of the monosulfamide 9 and the diureide 10. The latter with trichloromethanesulfenyl chloride afforded the derivative 12a. and with chlorosulfonic acid hydrazinodicarbonamide (11). The azine 7a with benzoyl isocyanate (2) gave the expected crisscross adduct 13. With thiobenzoyl isocyanate (3) however, both 7a and 7d gave the 1: 1 adducts (14). whereas 7c gave a different 2: 1 adduct (15). Treatment of 14a with 1 gave the ureide 16. With both methyl isocyanate (4) and phenyl isocyanate (S), 7a gave the expected crisscross adducts (17a and b), and 7c with 5 similarly gave 17c. When 7a was treated with 1 followed by aqueous potassium iodide, the diureide (10) was formed; concentrated nitric acid converted 10 into the triazolenone (18). Treatment of 18 with chlorosulfonic acid-thionyl chloride gave the sulfonyl chloride (19) which was characterised as the sulfonamides (20 a-d).

Diarylsulfamoyl azines (21 a-f) with 1 and potassium iodide, gave the diureides 22 a-f. 4-Methoxy-3-sulfamoylbenzaldehydeazines (23 a-c) reacted with 3 to give the 1: I adducts 24 a-c, while 4-chlorosulfonylphenyl isocyanate (6) with benzaldehyde azine (7a) gave the bis-chlorosulfonyl adduct (25a). characterised as the diethylsulfonamide 25b. Attempted chlorosulfonation of the tetraphenyl cycloadduct 17b did not give the tetrasulfonyl chloride (although the reaction was successful with the more reactive rnethoxy adduct 17c); the tetrasulfonyl chloride (26a) was converted into 3 sulfonamides (26 b-d). The unsymmetrically-substituted diaryl azines (27) reacted with 1 and potassium iodide to yield the diureides 28 a-f. Analogous cycloadditions of 1 with several keto azines were unsuccessful. Selected compounds will be screened for medicinal and pesticidal activity; compounds 9,10 and 12a showed fungicidal activity against barley powdery mildew.     

Photolysis of organopolysilanes. The reaction of photochemically generated methylphenylsilylene with conjugated dienes

Photolysis of 2-phenylheptamethyltrisilane (I) in the presence of acyclic and cyclic conjugated dienes has been investigated using both a high-pressure mercury lamp with a quartz filter and a low-pressure mercury lamp with a Vycor filter. Irradiation of I in the presence of 1,3-butadiene, isoprene or 2,3-dimethylbutadiene with a high-pressure mercury lamp gave a product arising from photochemical isomerization of a silacyclopropane derivative and a compound apparently formed by 1,4-silylene addition, along with a 1/1 “ene” adduct of the diene to a photo-rearranged intermediate containing the silicon—carbon double bond. Irradiation of I in the presence of the conjugated diene with a low-pressure mercury lamp, followed by treatment of the product with methanol, afforded a methoxysilane arising from methanolysis of the corresponding silacyclopropane, together with the isomerization product, silacyclopentene and rearranged addition product. Irradiation of I in the presence of cyclopentadiene with a high-pressure mercury lamp produced methylphenylsilylcyclopentadiene, while irradiation of a similar mixture with a low-pressure mercury lamp followed by treatment with methanol gave 4-(methoxymethylphenylsilyl)-1-cyclopentene. With 1,3-cyclooctadiene, the photochemically generated methylphenylsilylene afforded many types of addition product. Photolysis of I in the presence of 1,3-cyclohexadiene, however, afforded none of the silylene addition products.