Optimized Palladium(0)‐catalyzed Suzuki Cross‐coupling Reaction of Polystyrene‐supported Selenenyl Flavanones: A Convenient Preparation of Biaryl‐chromen‐4‐one

Application of the Suzuki cross‐coupling reaction for efficient synthesis of diverse substituted biaryl‐chromen‐4‐ones using an optimized palladium(0) catalyst system is reported. The coupling of arylboronic acids with the resin‐bound bromoflavanones which were prepared by organoselenium‐induced regioselective intramolecular cyclization of bromo‐2‐hydroxylchalcones proceeded smoothly. Biaryl‐chromen‐4‐ones were synthesized by subsequent selenoxide syn‐elimination in good total yields.     

微波作用下大位阻氨基酸与H-Pro-CTC树脂的高效缩合

微波反应下, 运用新型固相肽合成反应器, 深入研究了五种大位阻氨基酸与H-Pro-CTC树脂(CTC树脂, 2-氯三苯甲基氯树脂)的缩合反应. 使用三次缩合的策略, 分别在DMF/NMP/THF (V∶V∶V＝1∶1∶1), NMP/DMSO/THF (V∶V∶V＝4∶1∶1), DMF/DMSO/THF (V∶V∶V＝4∶1∶1)混合溶剂中缩合一次, 每次缩合反应的最优条件为: 缩合试剂HBTU、氨基酸浓度7 mmol/L、微波辐射3 min、反应温度35 ℃、维持时间3 min, 与传统方法相比, 氨基酸的用量大大减少, 其过量倍数从5倍降低为2倍, 缩合反应速率提高了16倍以上. 五种大位阻氨基酸与H-Pro-CTC树脂的缩合率都提高到80%以上.     

First preparation of a novel polyol resin for purifying arylboronic acids

A novel polystyrene-supported triol resin was first prepared by reaction of the Merrifield resin with trometamol.Using this resin, arylboronic acids were efficiently isolated and purified through a "capture-release" procedure in organic solvents.However,in basic aqueous solvents arylboronic acids were immobilized on the resin only with low yield.     

Synthesis,characterization of novel interacting blends of acrylated poly(ester-amide)s containing epoxy residues with vinyl ester resin

Unsaturated bisamic acids were prepared by reaction between maleic anhydride and different aromatic diamines. Unsaturated poly(ester-amide) resin (UPEAs) was prepared by reaction of diglycidylether of bisphenol-A (DGEBA) with unsaturated bisamic acids. Acrylation of Unsaturated poly(ester-amide)s (UPEAs) was carried out to afford acrylated UPEAs resin (i.e., AUPEAs). Interacting blends of Acrylated unsaturated poly(ester-amide)s (AUPEAs) with vinyl ester epoxy (VE) resin were prepared. APEAs and AUPEAs were characterized by elemental analysis, molecular weight determined by vapor pressure osmometer and by IR spectral study and by thermogravimetry. The curing of interacting blends was monitored on differential scanning calorimeter (DSC). Based on DSC data in situ glass reinforced composites of the resultant blends have been prepared and characterized for mechanical, electrical and chemical properties. Unreinforced blends were characterized thermo-gravimetrically (TGA).     

Amino acids and peptides. XXXV. Facile preparation of p-nitroanilide analogs by the solid-phase method

p-Nitroanilides of amino acids and peptides are widely used as the chromogenic substrates for the determination of the activity of proteolytic enzymes. However, the preparation of a p-nitroanilide is not easy, in part due to the low nucleophilicity of the amino group of p-nitroaniline. A facile preparation of p-nitroanilide analog by the solid-phase method was investigated. 5-Amino-2-nitrobenzoic acid (Anb5,2) was used instead of p-nitroaniline (pNA) for preparation of p-nitroanilide analogs. Anb5,2 was introduced on a p-methylbenzhydrylamine resin without protection of the amino group of Anb5,2 by the 2-(H-benzotriazol-1-yl)-1,1,3,3-tetramethyluronium tetrafluoroborate (TBTU) method in the presence of p-dimethylaminopyridine. The coupling reaction of a Nalpha-,NG-protected arginine with a Anb5,2-resin was difficult to achieve by common coupling methods (such as the carbodiimide and diphenylphosphoryl azide methods), but the phosphoryl chloride method was relatively successful. Synthetic benzoyl-Arg-Anb5,2-NH2 and benzoyl-Arg-pNA were hydrolyzed by trypsin and the both reaction mixtures exhibited same spectroscopic characteristics. H-D-Val-Leu-Arg-Anb5,2-NH2, an analog of human urine kallikrein substrate, was readily prepared by the solid-phase method. H-Arg-Anb5,2-OH and H-D-Val-Leu-Arg-Anb5,2-OH were also synthesized on a Wang resin by the solid-phase method. The aqueous solubility of these free-carboxyl materials was better than those of the corresponding amide analogs. 4-Amino-3-nitrobenzoic acid (Anb4,3) was also introduced on the p-methybenzhydrylamine resin, but the resulting H-Anb4,3-resin did not react with Nalpha,NG-protected arginine by any of the coupling methods.     

Enantioselective reductive multicomponent coupling reactions between isatins and aldehydes

A metal-free stereoselective reductive coupling reaction between isatins and aldehydes is reported. The reaction relies on commercial diethyl phosphite (∼€70 kg^–1) as the stoichiometric reductant. Base-catalyzed Pudovik addition and phosphonate/phosphate rearrangement achieved polarity inversion on the isatin, and the derived carbanions were trapped by aldehydes with subsequent dialkoxyphosphinyl migration. Chiral iminophosphoranes were used as basic catalysts to achieve high diastereo- and enantioselectivities with excellent yields.     

Alternative molecularly imprinted polymeric membranes from a tetrapeptide residue consisting of D- or L-amino acids

Alternative molecularly imprinted polymeric membranes were prepared from a polystyrene resin bearing tetrapeptides consisting of D -amino acids or L-amino acids. The membrane prepared from a DLDE derivative (H-Asp(OcHex)-Leu-Asp(OcHex)-Glu(OBzl) CH₂ ) consisting of D -amino acids and imprinted by Boc-D -Trp recognizes the D-isomer in preference to the corresponding L -isomer and vice versa. The amino acid preferentially adsorbed by the membrane was selectively permeated by applying electrodialysis.     

大孔硼酸基聚苯乙烯树脂分离果葡糖研究

通过偶氮反应将氨基苯硼酸共价连接到聚苯乙烯载体上,制备了硼酸基聚苯乙烯载体.研究了实验条件对载体吸附果糖能力及载体分离柱分离效果的影响,确定了最佳洗脱条件.以长径比为175:1的分离柱,于室温下用pH6.1的二次水以0.16mL/min的流速进行洗脱,成功地将42%的果葡糖分离,果糖纯度达到99%.     

New heterocyclic beta-sheet ligands with peptidic recognition elements

A detailed and comprehensive overview is presented about the design, modeling, and synthesis, as well as spectroscopic characterization, of a new class of beta-sheet ligands. The characteristic feature of these compounds is a peptidic chimeric structure formed from a specific combination of aminopyrazolecarboxylic acids with naturally occurring alpha-amino acids. These hybrid peptides are designed with the aid of molecular modeling to exist mainly in an extended conformation. All their hydrogen bond donors and acceptors can be aligned at the bottom face in such a way that a perfect complementarity toward beta-sheets is obtained. Thus the aminopyrazoles impart rigidity and a highly efficient DAD sequence for the recognition of whole dipeptide fragments, whereas the natural alpha-amino acids are designed to mimick recognition sites in proteins, ultimately leading to sequence-selective protein recognition. The synthetic protocols either rely upon solution phase peptide coupling with a PMB protecting group strategy or solid-phase peptide coupling based on the Fmoc strategy, using the same protecting group. In solution, a key building block was prepared by catalytic reduction of a nitropyrazolecarboxylic acid precursor. Subsequently, it was (N-1)-protected with a PMB group, and elongated by HCTU- or T3P-assisted peptide coupling with dipeptide fragments, followed by PyClop-assisted coupling with another nitropyrazolecarboxylic acid building block. Final simultaneous deprotection of all PMB groups with hot TFA completed the high-yield protocol, which works racemization-free. After preparing a similar key building block with an Fmoc protection at N-3, we developed a strategy suitable for automated synthesis of larger hybrid ligands on a peptide synthesizer. Attachment of the first amino acid to a polystyrene resin over the Sieber amide linker is followed by an iterative sequence consisting of Fmoc deprotection with piperidine and subsequent coupling with natural alpha-amino acid via HATU/HOAt. High yields of free hybrid peptides are obtained after mild acidic cleavage from the resin, followed by deprotection of the PMB groups with hot TFA. The new aminopyrazole peptide hybrid compounds were characterized by various spectroscopic measurements including CD spectra, VT, and ROESY NMR experiments. All these accumulated data indicate the absence of any intramolecular hydrogen bonds and strongly support an extended conformation in solution, ideal for docking on to solvent-exposed beta-sheets in proteins. Initial results from aggregation tests of pathological proteins with these and related ligands look extremely promising.     

Studies on novel interacting blends of acrylated poly(ester-amide)s having epoxy residues and vinyl ester of bisphenol-C

Novel unsaturated poly(ester-amide)s (UPEAs) were prepared by the reaction of Bisphenol-F based epoxy resin with bisamic acids. Acrylation of UPEAs were carried out using acryloyl chloride and the products are called Acrylated unsaturated poly(ester-amide)s (AUPEAs). These UPEAs were then treated with acrylol chloride to afford acrylated UPEAs resin (i.e., AUPEAs). Interacting blends of equal proportional AUPEAs and vinyl ester epoxy (VE) resin were prepared. APEAs and AUPEAs were characterized by elemental analysis, molecular weight determined by vapor pressure osmometer, IR spectral study and thermogravimetry. Curing of interacting blends was monitored on differential scanning calorimeter (DSC). Based on DSC data ‘in situ’ glass reinforced composites of the resultant blends have been prepared and characterized for mechanical, electrical and chemical properties. Unreinforced blends were characterized by thermogravimetry (TGA).     

含α-氨基酸功能基的聚苯乙烯-二乙烯苯不对称树脂的合成

为了应用配位体离子交换树脂拆分外消旋混合物,由氯甲基化苯乙烯-二乙烯苯共聚物经苯胺树脂中间体或相转移催化剂与各种光学活性的α-氨基酸进行胺缩合反应,可以得到含有α-氨基酸功能基的不对称离子交换树脂。红外光谱分析证实了这类树脂的结构。这类胺缩合反应受到各种条件和因素的影响,例如溶剂的性质,催化剂的用量,反应温度和反应时间等。采用上述两种方法合成的含L-脯氨酸功能基的不对称树脂的Cu(Ⅱ)络合物对DL-脯氨酸进行了拆分。     

Synthesis and Application of a New Acrylic Ester Resin for Recycling SIPA from its Water Solution

A new acrylic ester polymer YWB-7 resin was prepared and characterized. The properties of YWB-7 resin were compared with those of the commercial Amberlite XAD-7, Diaion HP2MG and hypercrosslinked macroporous polymer NDA-150 resins. Both surface area and micropore area of YWB-7 resin were bigger than those of XAD-7 resin and HP2MG resin. The YWB-7 resin was successfully employed to recycle 5-sodiosulfoisophthalic acids （SIPA） from its solutions with and without methanol.     

Synthesis, proton and 13C NMR and reaction mechanism studies of novel isoindolones derivatives, obtained through TAWERS procedure

A series of novel isoindolone derivatives (13-18) were prepared in goods yields by applying the TAWERS methodology. A general approach for formation of isoindolones from the aza-Wittig reaction of iminophosphoranes with dialdehydes under neutral and mild conditions was realized. Using 1D NMR a [1,3]-hydride migration was detected. The assignment of the structures and conformation behavior of the derivatives was achieved using 1D and 2D NMR (NOESY, DEPT, HMQC, and HMBC).     

Solid-phase synthesis for beginners: Choice of tools and techniques for implementation of multistage transformations

Russian Journal of General Chemistry - Several mini-libraries were prepared by solid-phase synthesis: C,N-substituted glycines (1) and 2,5-diaminobenzoic acids (2) using Wang resin as well as...     

Quaternary ammonium compounds based on resin acids and rosin and their colloidal-chemical and biocidal properties

Quaternary ammonium compounds based on resin (diterpene) acids and rosin were prepared. Their colloidal-chemical and biocidal properties were studied, and possible applications were outlined.     

Preparation of tripeptide-bridged dicatechol ligands and their macrocyclic molybdenum(VI) complexes: fixation of the RGD sequence and the WKY sequence of urotensin ii in a cyclic conformation

Dicatechol ligands were prepared with caprylic acid (6-H(4)) or the naturally occurring RGD (23-H(4)) or WKY sequences (32-H(4)) as spacers. 6-H(4) was prepared by solution-phase amide coupling chemistry, while 16, the precursor of 23-H(4), was obtained by solution-phase and solid-phase preparation. In the latter case, a polystyrene resin with a hydrazine benzoate linker was used as the solid support. The last coupling step was performed simultaneously with cleavage of the peptide from the resin. The protecting groups of 16 were all removed in one step to yield the free ligand 23-H(4). The WKY-bridged derivative 32-H(4) was obtained by a similar solid-phase synthesis followed by deprotection. The reaction of all three ligands with dioxomolybdenum(VI) bis(acetylacetonate) afforded 19-membered metallamacrocycles in which the short peptides are conformationally fixed in a turn-type structure. Hereby, the side-chain functionalities of the peptides do not interfere in the metal complexation.     

大孔型腐植酸树脂的合成及其对重金属离子的螯合性

交联的聚苯乙烯(PS)通过偶氮键—N=N—或酯、醚键与腐植酸(HA)相连接枝得珠状大孔型腐植酸树脂(HAR)。当HA/PSNH_2的重量比为0.7—1.0,PSN_2~+Cl~-偶联PH13时制得的偶氮型腐植酸树脂(AHAR)对重金属离子有优良的吸附性。延长PSCH_2Cl与HA的反应时间可提高酯醚型腐植酸树脂(EHAR)对Cu~(2+)的吸附量。红外光谱探讨了HAR的结构。AHAR的吸附容量为1.01mmol~(2+)Cd/g树脂,对Ni~(2+)、Mn~(2+)、Cu~(2+)、Co~(3+)、Zn~(2+)为0.6—0.53mmol离子/g树脂。重金属离子在AHAR上的分配系数为 Cu~(2+)(8.7×10~3)>Cd~(2+)(3.8×10~2)>Zn~(2+)(2.4×10~2)>Ni~(2+)(1.8×10~2)>Mn~(2+)(4.9×10)。 pH6.5时AHAR能定量吸附Cu~(2+)、Cd~(2+)、Ni~(2+)、Mn~(2+),并能用INHNO_3定量洗脱。AHAR可再生,重复使用,分析了四种天然水、自来水中痕量上述金属离子的浓度。     

亚胺膦R_3PNH(R =CH_3,Cl)的极性及P-N键性质的理论研究

用从头算方法在B3LYP/ 6 31G 水平上对亚胺膦R3PNH(R =CH3,Cl)进行了理论计算研究。结果表明这两种亚胺膦的极性 ,P -N键性质及分子轨道存在明显差异 ,亚胺膦 (CH3) 3P =NH及其P -N键的极性很强 ,而Cl3P =NH的极性则较弱。与Cl3P =NH相比 (CH3) 3P =NH可能是较好的类Wittig反应试剂。     

Solid-phase synthesis of fullerene-peptides

The solid-phase synthesis of peptides (SPPS) containing [60]fullerene-functionalized amino acids is reported. A new amino acid, fulleropyrrolidino-glutamic acid (Fgu), is used for the SPPS of a series of analogues of different length based on the natural Leu(5)-Enkephalin and on cationic antimicrobial peptides. These fullero-peptides were prepared on different solid supports to analyze the influence of the resin on the synthesis. Optimized protocols for the coupling and deprotection procedures were determined allowing the synthesis of highly pure peptides in sufficient quantities for evaluation of biological activities. In particular, to avoid side reactions of the fullerene moiety with bases and nucleophiles, the removal of the protecting groups was performed under inert conditions (nitrogen or argon in the dark). We have encountered serious problems with the recovery of the crude compounds, especially when Fgu was inserted in the proximity of the resin core as fullero-peptides tend to remain embedded inside the resin. Eventually, all of the fullero-peptides were easily purified, and the cationic peptides were tested for their antimicrobial activities. They displayed a specific activity against the Gram-positive bacterium S. aureus and also lysed erythrocytes. The availability of a fullero-amino acid easily useable in the SPPS of fullero-peptides may thus open the way to the synthesis of new types of biologically active oligomers.