Potentiometric Determination of the First Hydrolysis Constant of Gallium(III) in NaCl Solution to 100°C

The hydrolysis equilibrum of gallium (III) solutions in aqueous 1 mol-kg^–1 NaCl over a range of low pH was measured potentiometrically with a hydrogen ion concentration cell at temperatures from 25 to 100°C at 25°C intervals. Potentials at temperatures above 100°C increased gradually because of further hydrolysis of the gallium(III) ion, followed by precipitation. The results were treated with a nonlinear least-squares computer program to determine the equilibrium constants for gallium(III)–hydroxo complexes using the Debye–Hückel equation. The log K (mol-kg^–1) values of the first hydrolysis constant for the reaction, Ga³⁺ + H₂O GaOH²⁺ + H⁺ were –2.85 ± 0.03 at 25°C, –2.36 ± 0.03 at 50°C, –1.98 ± 0.01 at 75°C, and –1.45 ± 0.02 at 100°C. The computed standard enthalpy and entropy changes for the hydrolysis reaction are presented over the range of experimental temperatures.     

Transference numbers of potassium picrate in water at 25°C and the dimerization of picrate ions

The cation- and anion-constituent transference numbers of aqueous 0.02M potassium picrate have been measured at 25°C by the moving-boundary method. The large difference (0.014) between the results and the predictions of the Debye-Hückel-Onsager theory, and similar anomalies in the literature, are consistent with the existence of picrate ion dimers (Pi ₂ ^2– ) with a formation constant of 4(±2) liter-mole^–1.This work was carried out at Imperial College while P. G. N. Moseley was on leave of absence from the University of Khartoum.     

Ionic Association and Mobility IV. Ionophores in Dimethylsulfoxide at 25°C

The results of conductance measurements on pyridinium picrate, tetraphenylo-sonium picrate, potassium picrate, tetraphenylantimony picrate, tetrapropylam-monium, tetrafluoroborate, tetramethylammonium hexafluorophosphate ion association noncoulombic interaction in dimethyl sulfoxide (DMSO) at 25°C in the concentration range 1–15×10^–4 M are reported. The data were analyzed by the Justice modification of the Fuoss–Hsia equation. Except for pyridinium picrate all salts studied were found to be associated.Application of the Justice Barthel–Bjerrum model of ion association permitted calculation of the noncoulombic portion of the potential of mean force, W _±. Ionic limiting conductances were calculated for six ions using known values of previously determined transport numbers. A table of most current limiting ionic conductances for a variety of ions in DMSO at 25°C has been established.     

Spectrophotometric study of the complexation of iodine with 1,7-diaza-15-crown-5 in chloroform solution

The complex formation reaction between iodine and 1,7-diaza-15-crown-5 (DA15C5) has been studied spectrophotometrically in chloroform at 25°C. The resulting 1:2 (DA15C5:I₂) molecular complex was formulated as (DA15C5...;I⁺)I ₃ ^– . The spectrophotometric results, as well as the conductivity measurements, revealed that the gradual release of triiodide ion from its contact ion paired form in the molecular complex into the solution is the rate determining step of the reaction. The rate constant was calculated ask=(8.8±0.2)×10^–3 min^–1. The formation constant of the molecular complex was evaluated from the computer fitting of the absorbance-mole ratio data as logK _f=6.89±0.09.     

Conductance behavior of some tris(ethylenediamine)cobalt(III) complexes and their ion association in aqueous solutions

The conductance behavior of some tris(ethylenediamine)cobalt(III) complexes was studied in dilute aqueous solutions at 25°C to investigate the ion-pair formation. The thermodynamic formation constants of the ion pairs [Co(en)₃]³⁺·X^– are 28 (chloride), 28 (bromide), 19 (nitrate), and 15 (perchlorate). These values were compared with theoretical values calculated by using Bjerrum's theory of ion association. The formation constant of [Co(en)₃]³⁺·Cl^– was larger than that obtained from the spectrophotometric measurement in solutions containing perchlorate ion. This difference in the formation constants was explained by considering the contribution of ion association of the complex cation with perchlorate ion.     

Triiodide ion formation equilibrium and activity coefficients in aqueous solution

The equilibrium quotient for the formation of triiodide was studied as a function of temperature, 3.8–209.0°C, and ionic strength, 0.02–6.61. The best-fit value for the molal equilibrium constant at 25°C is 698±10 and the corresponding partial molal enthalphy, entropy, and heat capacity of formation are: H^o=–17.0±0.6 kJ-mol^–1, S^o=–0.6±0.3 J-K^–1-mol^–1, and C _p ^o =–21±8 J-K^–1-mol^–1. Activity coefficients of iodine were determined as a function of ionic strength (NaClO₄) at 25°C and conclusions are drawn as to the corresponding ionic strength dependence of the triiodide anion.     

Ion association in calcium phosphate solutions at 37°C

Ion association in the system Ca(OH)₂–H₃PO₄–KCl–H₂O at 37°C has been studied potentiometrically over a range of pH from 3 to 9. The experimental conditions were optimized for the accurate determination of the association constants for the formation of the ion pairs CaH₂PO ₄ ⁺ , CaHPO₄ and CaPO ₄ ^– which were found to be 27.9±0.1, 591±2, and (1.35±0.02)×10⁶ L-mol^–1, respectively.     

Kinetics and mechanism of formation of square-planar copper(II) and nickel(II) complexes of ethylenebisbiguanide in aqueous acetate buffer media

Summary The kinetics of formation of square-planar Cu^II and Ni^II complexes of the quadridentate ligand, ethylenebisbiguanide, have been studied spectrophotometrically in aqueous HOAc–NaOAc buffer, at ionic strength 0.2 mol dm^–3, in the 25–35°C temperature range. The observed rate constants for the formation reactions are independent of pH (and of OAc^– concentration) in the pH range used (3.6–4.8 for Cu^II and 5.0–5.8 for Ni^II) where the product complexes form stoichiometrically, but show first-order dependence on the ligand concentration;i.e. k_obs=k_f[L]_total. At 25°C k_f values (dm³ mol^–1s^–1) are 35.2±0.4 for Cu^II and (8.4±0.1)×10^–3 for Ni^II. The mechanism of the reactions is discussed.     

The effect of high pressure on the ion pair equilibrium constant of alkali metal fluorides: A spectrophotometric study

Bromophenol blue indicator was used in UV-visible spectrophotometric measurements to study ion association constants of alkali metal fluorides. The equilibrium constants for the ion pair formation of the alkali metal fluorides were determined as a function of ionic strength at one atmosphere pressure and 25°C. The effect of pressure on these association constants was measured at a constant total ionic strength of 1.0 mol-kg^–1 over a pressure range of 1 to 2000 atmospheres at 25°C. The pressure dependences of the stoichiometric association constants of the alkali metal fluorides are given by: lnK _LiF ^* =0.77–2.47×10^–4P–2.12×10^–8P²; lnK _NaF ^* =0.53–1.08×10^–4P–1.66×10^–8P²; lnK _KF ^* =0.24–4.41×10^–5P–7.15×10^–8P²; lnK _RbF ^* =–0.17–8.65×10^–5P–4.51×10^–8P²; and lnK _CsF ^* = –0.37–1.14×10^–4P–6.82×10^–8P², where P is the pressure in atmospheres. The stoichiometric molar volume and compressibility changes for ion pair formation of the alkali metal fluorides were evaluated from the pressure dependence of K _MF ^* data. The thermodynamic association constants were also calculated making use of activity coefficient data from the Pitzer equations. The partial molal volume and compressibility changes for ion pair formation of each alkali metal fluoride are reported.     

Dissociation constants of phosphoric acid at 25°C and the ion pairing of sodium with orthophosphate ligands at 25°C

The first and second acidity constants of phosphoric acid were determined in a 0.70 ionic strength solution of both a sodium and a potassium ion background salt at 25°C. These experimentally determined constants were compared to literature values as well as values calculated from a theoretical model. Assuming negligible ion pairing of the phosphate ligand with the potassium ions, the stability constants of the NaHPO ₄ ^- and NaH₂PO ₄ ⁰ complexes were determined to be 1.3±0.3 and 0.49±0.07 (mol-L^–1), respectively. These constants were used to model the speciation of orthophosphate in a background of a sodium salt from pH 3 to 10.     

Ion association in solutions of dimethylthallium(III) hydroxide

From studies of the specific hydroxide ion catalyzed decomposition of diacetone alcohol by dimethylthallium(III) hydroxide at 25°C, it is concluded that both ion pairs (dissociation constantK=0.090 mole-dm^–3) and dimers (dimerization constantK _d=1.5 dm³-mole^–1) exist in aqueous solution.Request for reprints should be addressed to: Dr. A. D. Pethybridge, Department of Chemistry, The University, Whiteknights Park, Reading, Berkshire, England.Deceased October 16, 1972.     

Kinetics and mechanism of complex formation between beryllium(II) and the 3-nitrosalicylatopentaamminecobalt(III) ion

Summary The kinetics of formation and dissociation of the binuclear complex of Be²⁺ with 3-nitrosalicylatopentaamminecobalt(III) have been investigated in the 20–40 and 25–40 °C ranges (I = 0.3 mol dm ^–3), respectively. At 25 °C the rate and activation parameters for the formation of the binuclear species are: k _f = 26.9 × 10² dm³mol^–1s^–1, H = 104 ± 7kJ mol^–1 S = 91 ± 22JK^–1mor^–1.The rate constant, activation enthalpy and activation entropy for the acid-catalysed dissociation of the binuclear species are: 1.25 ± 0.08dm³mol ^–1 at 25 °C, 53 ± 3kJ mol^–1 and - 67 ± 9 J K ^–1 mol^–1, respectively. The formation of the binuclear species is chelation controlled while the dechelation is acid catalysed.     

Cloud points and phase separation of aqueous poly(N-vinylacetamide) solutions in the presence of salts

Aqueous poly(N-vinylacetamide) (PNVA) solution was found to exhibit the cloud point in the presence of salt. This cloud point was shown to correspond to a liquid-liquid phase separation, as confirmed when the PNVA-salt solutions were maintained at a temperature above the cloud point. The upper layer had a higher polymer concentration and a lower salt concentration than those in the lower layer. Thus interaction between PNVA and salts are repulsive. The lower critical solution temperatures were estimated to be 18±1°C for 1.25 molal (NH₄)₂SO₄ and 25±1°C for 0.76 molal Na₂SO₄. Divalent anions such as SO _2– ⁴ , SO _2– ³ , HPO _2– ⁴ and CO _2– ³ were effective in causing turbidity when examined at 25°C. Dependence of the effect on the cationic species was similar to but significantly different from that for acetyltetraglycine ethylester. The cloud points of PNVA decreased linearly with the increase of the polymer concentration at a fixed salt concentration or with the increase of the salt concentration at a fixed polymer concentration. A parameter analogous to the salting-out constant was empirically derived from the dependencies of the cloud points on the concentrations of polymer and salt.     

Solvent effects on extraction of potassium picrate with benzo-18-crown-6. A new equation for the determination of ion-pair formation of crown ether-metal salt complexes in water

In order to determine the ion-pair formation constant of a crown ether-metal salt 1:1:1 complex in water, an equation is derived from regular solution theory and its predictions are verified experimentally by the solvent extraction method using benzo-18-crown-6 (B18C6), potassium picrate (KA), and various diluents of low dielectric constant. The distribution constants of B18C6 itself and the overall extraction constants of KA with B18C6 were determined at 25±0.2°C. The distribution constants of the neutral K(B18C6)A complex were calculated from these data. The literature value for the complex-formation constant of K(B18C6)⁺ in water and the ion-pair formation constant (K _K(B18C6)A ) for K(B18C6)A in water determined in this study were log K _K(B18C6)A =3.12±0.23 at 25°C). The distribution behavior of B18C6 and K(B18C6)A is explained in terms of regular solution theory. The molar volumes V (cm³·mol^–1) and solubility parameters (cal^1/2-cm^–3/2) are as follows: V _B18C6 =249±36; V _K(B18C6)A =407±56; _B18C6 = 11.5 ± 0.5; and _K(B18C6)A = 11.5 ± 0.5.     

Pyrolysis of eicosane in supercritical water

Pyrolysis of eicosane and redox reactions of the pyrolysis products in supercritical water (SCW) were studied in a batch reactor at 30 MPa, in the temperature range from 450 to 750 °C and with reaction times ranging from 75 to 600 s. The rate constants for eicosane pyrolysis (k" = 10^16.5±0.5exp[–(32000±2000)/T] s^–1) and for the formation of H₂ (k = 10^25±0.8exp[–(64000±4000)/T] s^–1) were determined. The time and temperature dependences of the heat of reaction were elucidated. Water accelerates pyrolysis and participates in the subsequent transformations of the pyrolysis products. The yield of H₂ sharply increases for T > 700 °C.     

Dissociation quotients of malonic acid in aqueous sodium chloride media to 100°C

The first and second molal dissociation quotients of malonic acid were measured potentiometrically in a concentration cell fitted with hydrogen electrodes. The hydrogen ion molality of malonic acid/bimalonate solutions was measured relative to a standard aqueous HCl solution from 0 to 100°C over 25° intervals at five ionic strengths ranging from 0.1 to 5.0 molal (NaCl). The molal dissociation quotients and available literature data were treated in the all anionic form by a seven-term equation. This treatment yielded the following thermodynamic quantities for the first acid dissociation equilibrium at 25°C: logK _1a =-2.852±0.003, H _1a ^/o =0.1±0.3 kJ-mol^–1, S _1a ^o =–54.4±1.0 J-mol^–1-K^–1, and C _p,1a ^o =–185±20 J-mol^–1-K^–1. Measurements of the bimalonate/malonate system were made over the same intervals of temperature and ionic strength. A similar regression of the present and previously published equilibrium quotients using a seven-term equation yielded the following values for the second acid dissociation equilibrium at 25°C: logK_2a=–5.697±0.001, H _2a ^o =–5.13±0.11 kJ-mol^–1, S _2a ^o =–126.3±0.4 J-mol^–1-K^–1, and C _p,2a ^o =–250+10 J-mol^–1-K^–1.Presented at the Second International Symposium on Chemistry in High Temperature Water, Provo, UT, August 1991.     

Preparation and Thermochemistry of Complexes of Zinc Nitrate with Threonine

The solubility property of Zn(NO₃)₂–Thr–H₂O system (Thr—threonine) at 25°C in the entire concentration range has been investigated by the phase equilibrium semimicromethod. The corresponding phase diagram and refractive index diagram were constructed. From the phase equilibrium results, the incongruently soluble compounds of Zn(Thr)(NO₃)₂ · 2H₂O, Zn(Thr)₂(NO₃)₂ · H₂O, and Zn(Thr)₃(NO₃)₂ · H₂O were synthesized and characterized by IR, XRD, TG–DTG, chemical and elemental analyses. The constant-volume combustion energies of the compounds, _c E, determined by precision rotating bomb calorimeter at 298.15 K, were –6266.88 ± 3.72, –9263.28 ± 2.23, and –11 423.11 ± 6.81 J/g, respectively. The standard enthalpies of combustion for these compounds, _c H _m ^° (complex, s., 298.15 K), were calculated as –2147.40 ± 1.28, –4120.83 ± 0.99, and –6444.68 ± 3.85 kJ/mol and the standard enthalpies of formation, _f H _m ^° (complex, s., 298.15 K), are –1632.82 ± 1.43, –1885.55 ± 1.50, and –2770.25 ± 4.21 kJ/mol. The enthalpies of dissolution of the complexes in a medium of simulated human gastric juice (37°C, pH 1, in the solution of hydrochloric acid), _dis H _m ^° (complex, s., 310 K), which were also measured by a microcalorimeter to be 13.36 ± 0.06, 15.53 ± 0.06, and 17.04 ± 0.05 kJ/mol, respectively.     

Thermochemistry of Amines: Experimental Standard Molar Enthalpies of Formation of N-Alkylated Piperidines

The standard molar enthalpies of formation _f H _m ^° (l) at the temperature T = 298.15 K were determined using combustion calorimetry for N-methylpiperidine (A), N-ethylpiperidine (B), N-propylpiperidine (C), N-butylpiperidine (D), N-cyclopentylpiperidine (E), N-cyclohexylpiperidine (F), and N-phenylpiperidine (G). The standard molar enthalpies of vaporization _l ^g H ^{m °} of these compounds were obtained from the temperature variation of the vapor pressure measured in a flow system. From these data the following standard molar enthalpies of formation in gaseous phase _f H _m ^° (g) were derived for: A –(61.39 ± 0.88); B –(88.1 ± 1.3); C –(105.81 ± 0.66); D –(126.2 ± 1.3); E ( –88.21 ± 0.75); F –(135.21 ± 0.94); G (70.3 ± 1.4) kJ · mol^–1. They are used to determine the strain enthalpies of the cyclic amines A–G. The N-alkylated piperidine rings have been found to be about strainless.     

Cadmium Malonate Complexation in Aqueous Sodium Trifluoromethanesulfonate Media to 75°C; Including Dissociation Quotients of Malonic Acid

The molal formation quotients for cadmium–malonate complexes were measured potentiometrically from 5 to 75°C, at ionic strengths of 0.1, 0.3, 0.6 and 1.0 molal in aqueous sodium trifluoromethanesulfonate (NaTr) media. In addition, the stepwise dissociation quotients for malonic acid were measured in the same medium from 5 to 100°C, at ionic strengths of 0.1, 0.3, 0.6, and 1.0 molal by the same method. The dissociation quotients for malonic acid were modeled as a function of temperature and ionic strength with empirical equations formulated such that the equilibrium constants at infinite dilution were consistent, within the error estimates, with the malonic acid dissociation constants obtained in NaCl media. The equilibrium constants calculated for the dissociation of malonic acid at 25°C and infinite dilution are log K _1a=-2.86 ± 0.01 and log K _2a=-5.71 ± 0.01. A single Cd–malonate species, CdCH₂C₂O₄, was identified from the complexation study and the formation quotients for this species were also modeled as a function of temperature and ionic strength. Thermodynamic parameters obtained by differentiating the equation with respect to temperature for the formation of CdCH₂C₂O₄ at 25°C and infinite dilution are: K = 3.45 ± 0.09, S° = 7 ± 6 kJ-mol^-1, S° = 91 ± 22 J-K^--mol^-1, and C _p ^o =400±300 J­K^-1­mol^-1.     

Dissociation quotients of D-galacturonic acid in aqueous solution at 0.1 MPa to 1 molal ionic strength and 100°C

The molal dissociation quotients of D-galacturonic acid were measured potentiometrically in a newly-designed, hydrogen-electrode concentration cell from 5 to 100°C at four ionic strengths ranging from 0.1 to 1.0 mol-kg^–1 using sodium trifluoromethanesulfonate (NaF₃CSO₃) as the supporting electrolyte. These quotients were fitted in the all anionic (isocoulombic) form by an empirical equation incorporating three adjustable parameters. When combined with the known dissociation quotient for water in the same medium, this treatment yielded the following thermodynamic quantities for the acid dissociation equilibrium at 25°C and infinite dilution: log K_H=–3.490±0.011, H _H ⁰ =0.4±0.2 kJ-mol^–1, S _H ⁰ =–65±1 J-mol^–1-K^–1, and C _{p, H} ⁰ =–231±8 J-mol^–1-K^–1. Comparisons are made with the corresponding results of a limited number of previous studies carried out near ambient conditions.