Biohybrid photosynthetic antenna complexes for enhanced light-harvesting

Biohybrid antenna systems have been constructed that contain synthetic chromophores attached to 31mer analogues of the bacterial photosynthetic core light-harvesting (LH1) β-polypeptide. The peptides are engineered with a Cys site for bioconjugation with maleimide-terminated chromophores, which include synthetic bacteriochlorins (BC1, BC2) with strong near-infrared absorption and commercial dyes Oregon green (OGR) and rhodamine red (RR) with strong absorption in the blue-green to yellow-orange regions. The peptides place the Cys 14 (or 6) residues before a native His site that binds bacteriochlorophyll a (BChl-a) and, like the native LH proteins, have high helical content as probed by single-reflection IR spectroscopy. The His residue associates with BChl-a as in the native LH1 β-polypeptide to form dimeric ββ-subunit complexes [31mer(-14Cys)X/BChl](2), where X is one of the synthetic chromophores. The native-like BChl-a dimer has Q(y) absorption at 820 nm and serves as the acceptor for energy from light absorbed by the appended synthetic chromophore. The energy-transfer characteristics of biohybrid complexes have been characterized by steady-state and time-resolved fluorescence and absorption measurements. The quantum yields of energy transfer from a synthetic chromophore located 14 residues from the BChl-coordinating His site are as follows: OGR (0.30) < RR (0.60) < BC2 (0.90). Oligomeric assemblies of the subunit complexes [31mer(-14Cys)X/BChl](n) are accompanied by a bathochromic shift of the Q(y) absorption of the BChl-a oligomer as far as the 850-nm position found in cyclic native photosynthetic LH2 complexes. Room-temperature stabilized oligomeric biohybrids have energy-transfer quantum yields comparable to those of the dimeric subunit complexes as follows: OGR (0.20) < RR (0.80) < BC1 (0.90). Thus, the new biohybrid antennas retain the energy-transfer and self-assembly characteristics of the native antenna complexes, offer enhanced coverage of the solar spectrum, and illustrate a versatile paradigm for the construction of artificial LH systems.     

Synthesis and Functional Reconstitution of Light‐Harvesting Complex II into Polymeric Membrane Architectures

One of most important processes in nature is the harvesting and dissipation of solar energy with the help of light‐harvesting complex II (LHCII). This protein, along with its associated pigments, is the main solar‐energy collector in higher plants. We aimed to generate stable, highly controllable, and sustainable polymer‐based membrane systems containing LHCII–pigment complexes ready for light harvesting. LHCII was produced by cell‐free protein synthesis based on wheat‐germ extract, and the successful integration of LHCII and its pigments into different membrane architectures was monitored. The unidirectionality of LHCII insertion was investigated by protease digestion assays. Fluorescence measurements indicated chlorophyll integration in the presence of LHCII in spherical as well as planar bilayer architectures. Surface plasmon enhanced fluorescence spectroscopy (SPFS) was used to reveal energy transfer from chlorophyll b to chlorophyll a, which indicates native folding of the LHCII proteins.     

Light harvesting and energy transfer within coumarin‐labeled polymers

Linear copolymers that have pendant coumarin‐2 and coumarin‐343 chromophores were prepared as analogues to previously synthesized light‐harvesting dendrimers. The chromophore ratios within these polymers were maintained similar to those of the various generation dendrimers to investigate the effect of polymer architecture on the energy‐transfer efficiency between the coumarin‐2 donors and coumarin‐343 acceptors. Both physical and photophysical properties of these polymers were analyzed and compared to those of the analogous dendrimers. Energy‐transfer efficiencies were relatively high in the polymers; however, deleterious excimer formation between the coumarin‐343 chromophores diminished the quantum yield of fluorescence of the polymers when compared to the analogous dendrimers. Overall, it was found that the ultimate performance of the dendritic light‐harvesting antennae was superior to that of the polymeric analogues, but the polymers were more practical in terms of synthetic accessibility. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1366–1373, 2001     

Integrating DNA Photonic Wires into Light‐Harvesting Supramolecular Polymers

An approach combining DNA nanoscaffolds with supramolecular polymers for the efficient and directional propagation of light‐harvesting cascades has been developed. A series of photonic wires with different arrangements of fluorophores in DNA‐organized nanostructures were linked to light‐harvesting supramolecular phenanthrene polymers (SPs) in a self‐assembled fashion. Among them, a light‐harvesting complex (LHC) composed of SPs and a photonic wire of phenanthrene, Cy3, Cy5, and Cy5.5 chromophores reveals a remarkable energy transfer efficiency of 59 %. Stepwise transfer of the excitation energy collected by the light‐harvesting SPs via the intermediate Cy3 and Cy5 chromophores to the final Cy5.5 acceptor proceeds through a Förster resonance energy transfer mechanism. In addition, the light‐harvesting properties are documented by antenna effects ranging from 1.4 up to 23 for different LHCs.     

DNA‐Based Oligochromophores as Light‐Harvesting Systems

The chromophores ethynyl pyrene as blue, ethynyl perylene as green and ethynyl Nile red as red emitter were conjugated to the 5‐position of 2′‐deoxyuridine via an acetylene bridge. Using phosphoramidite chemistry on solid phase labelled DNA duplexes were prepared that bear single chromophore modifications, and binary and ternary combinations of these chromophore modifications. The steady‐state and time‐resolved fluorescence spectra of all three chromophores were studied in these modified DNA duplexes. An energy‐transfer cascade occurs from ethynyl pyrene over ethynyl perylene to ethynyl Nile red and subsequently an electron‐transfer cascade in the opposite direction (from ethynyl Nile red to ethynyl perylene or ethynyl pyrene, but not from ethynyl perylene to ethynyl pyrene). The electron‐transfer processes finally provide charge separation. The efficiencies by these energy and electron‐transfer processes can be tuned by the distances between the chromophores and the sequences. Most importantly, excitation at any wavelength between 350 and 700 nm finally leads to charge separated states which make these DNA samples promising candidates for light‐harvesting systems.     

Efficient Light‐Harvesting Systems with Tunable Emission through Controlled Precipitation in Confined Nanospace

Light harvesting is a key step in photosynthesis but creation of synthetic light‐harvesting systems (LHSs) with high efficiencies has been challenging. When donor and acceptor dyes with aggregation‐induced emission were trapped within the interior of cross‐linked reverse vesicles, LHSs were obtained readily through spontaneous hydrophobically driven aggregation of the dyes in water. Aggregation in the confined nanospace was critical to the energy transfer and the light‐harvesting efficiency. The efficiency of the excitation energy transfer (EET) reached 95 % at a donor/acceptor ratio of 100:1 and the energy transfer was clearly visible even at a donor/acceptor ratio of 10 000:1. Multicolor emission was achieved simply by tuning the donor/acceptor feed ratio in the preparation and the quantum yield of white light emission from the system was 0.38, the highest reported for organic materials in water to date.     

Light Harvesting and White‐Light Generation in a Composite of Carbon Dots and Dye‐Encapsulated BSA‐Protein‐Capped Gold Nanoclusters

Several strategies have been adopted to design an artificial light‐harvesting system in which light energy is captured by peripheral chromophores and it is subsequently transferred to the core via energy transfer. A composite of carbon dots and dye‐encapsulated BSA‐protein‐capped gold nanoclusters (AuNCs) has been developed for efficient light harvesting and white light generation. Carbon dots (C‐dots) act as donor and AuNCs capped with BSA protein act as acceptor. Analysis reveals that energy transfer increases from 63 % to 83 % in presence of coumarin dye (C153), which enhances the cascade energy transfer from carbon dots to AuNCs. Bright white light emission with a quantum yield of 19 % under the 375 nm excitation wavelength is achieved by changing the ratio of components. Interesting findings reveal that the efficient energy transfer in carbon‐dot–metal‐cluster nanocomposites may open up new possibilities in designing artificial light harvesting systems for future applications.     

A DNA–Fullerene Conjugate as a Template for Supramolecular Chromophore Assemblies: Towards DNA‐Based Solar Cells

A fullerene was covalently attached to a (dA)₂₀ template that serves as structural scaffold to self‐assemble an ordered and mixed array of ethynyl‐pyrene‐ and ethynyl‐Nile‐red‐nucleoside conjugates. Fluorescence spectroscopy revealed evidence for energy transfer between the two different chromophores. Moreover, fluorescence quenching is significantly enhanced by the attached fullerene in mixed assemblies of different chromophore ratios. This indicates exciton dissociation by electron transfer from the photo‐generated exciton on the chromophore stack to the fullerene. The fullerene–DNA‐conjugate was integrated as a photo‐active layer in solar cells that showed charge‐carrier generation in the spectral regime of all three components of the conjugate. This work clearly demonstrates that DNA is suitable as structural element for chromophore assemblies in future organic optoelectronic devices, such as solar cells.     

Light‐Harvesting Systems Based on Organic Nanocrystals To Mimic Chlorosomes

We report the first highly efficient artificial light‐harvesting systems based on nanocrystals of difluoroboron chromophores to mimic the chlorosomes, one of the most efficient light‐harvesting systems found in green photosynthetic bacteria. Uniform nanocrystals with controlled donor/acceptor ratios were prepared by simple coassembly of the donors and acceptors in water. The light‐harvesting system funneled the excitation energy collected by a thousand donor chromophores to a single acceptor. The well‐defined spatial organization of individual chromophores in the nanocrystals enabled an energy transfer efficiency of 95 %, even at a donor/acceptor ratio as high as 1000:1, and a significant fluorescence of the acceptor was observed up to donor/acceptor ratios of 200 000:1.     

Photoemission Studies on N‐Substituted Dithienylated Phenothiazines

Dithienylated phenothiazines (DTPTs) with different functional groups attached to the central nitrogen atom are presented as a class of versatile metal‐free chromophores for the design of dye‐sensitized solar cells (DSSCs) and organic light‐emitting diodes (OLEDs). The electronic characteristics of spin‐coated thin films on polycrystalline gold were studied using photoelectron spectroscopy assisted by theoretical calculations, scanning force microscopy, and UV/Vis spectroscopy. Complementary fluorescence spectra show light emission in the blue region (465 nm). The absorption properties and good hole‐transporting abilities make DTPTs feasible hole‐transporting materials (HTM) and metal‐free chromophores in UV‐sensitive solar cell designs.     

Chlorin–Bacteriochlorin Energy‐transfer Dyads as Prototypes for Near‐infrared Molecular Imaging Probes: Controlling Charge‐transfer and Fluorescence Properties in Polar Media

The photophysical properties of two energy‐transfer dyads that are potential candidates for near‐infrared (NIR) imaging probes are investigated as a function of solvent polarity. The dyads ( FbC‐FbB and ZnC‐FbB ) contain either a free base (Fb) or zinc (Zn) chlorin (C) as the energy donor and a free base bacteriochlorin (B) as the energy acceptor. The dyads were studied in toluene, chlorobenzene, 1,2‐dichlorobenzene, acetone, acetonitrile and dimethylsulfoxide (DMSO). In both dyads, energy transfer from the chlorin to bacteriochlorin occurs with a rate constant of ～(5–10 ps)^?1 and a yield of >99% in nonpolar and polar media. In toluene, the fluorescence yields (Φ _f = 0.19) and singlet excited‐state lifetimes (τ～5.5 ns) are comparable to those of the benchmark bacteriochlorin. The fluorescence yield and excited‐state lifetime decrease as the solvent polarity increases, with quenching by intramolecular electron (or hole) transfer being greater for FbC‐FbB than for ZnC‐FbB in a given solvent. For example, the Φ _f and τ values for FbC‐FbB in acetone are 0.055 and 1.5 ns and in DMSO are 0.019 and 0.28 ns, whereas those for ZnC‐FbB in acetone are 0.12 and 4.5 ns and in DMSO are 0.072 and 2.4 ns. The difference in fluorescence properties of the two dyads in a given polar solvent is due to the relative energies of the lowest energy charge‐transfer states, as assessed by ground‐state redox potentials and supported by molecular‐orbital energies derived from density functional theory calculations. Controlling the extent of excited‐state quenching in polar media will allow the favorable photophysical properties of the chlorin–bacteriochlorin dyads to be exploited in vivo. These properties include very large Stokes shifts (85 nm for FbC‐FbB , 110 nm for ZnC‐FbB ) between the red‐region absorption of the chlorin and the NIR fluorescence of the bacteriochlorin (λ _f = 760 nm), long bacteriochlorin excited‐state lifetime (～5.5 ns), and narrow (≤20 nm) absorption and fluorescence bands. The latter will facilitate selective excitation/detection and multiprobe applications using both intensity‐ and lifetime‐imaging techniques.     

Light‐Harvesting Three‐Chromophore Systems Based on Biphenyl‐Bridged Periodic Mesoporous Organosilica

Three‐chromophore systems with light‐harvesting behavior were prepared, which are based on periodic mesoporous organosilica (PMO) with crystal‐like ordered structure. The organic bridges of biphenyl‐PMO in the pore walls act as donors and two types of dye are incorporated in the one‐dimensional channels. Consecutive two‐step‐Förster resonance energy transfer is observed from the biphenyl moieties to mediators (diethyl‐aminocoumarin or aminoacridone), followed by energy transfer from mediators to acceptors (dibenzothiacarbocyanine, indodicarbocyanine, sulforhodamine G). High energy‐transfer efficiencies ranging from 70 to 80 % are obtained for two‐step‐FRET, indicating that the mesochannel structure with one‐dimensional ordering provides spatial arrangement of chromophore pairs for an efficient direct energy transfer. The emission wavelength can be tuned by a choice of acceptor dye: 477 nm (diethylaminocoumarin), 519 nm (aminoacridone), 567 nm (sulforhodamine G), 630 nm (dibenzothiacarbocyanine), and 692 nm (indodicarbocyanine).     

A Complex Comprising a Cyanine Dye Rotaxane and a Porphyrin Nanoring as a Model Light‐Harvesting System

A nanoring‐rotaxane supramolecular assembly with a Cy7 cyanine dye (hexamethylindotricarbocyanine) threaded along the axis of the nanoring was synthesized as a model for the energy transfer between the light‐harvesting complex LH1 and the reaction center in purple bacteria photosynthesis. The complex displays efficient energy transfer from the central cyanine dye to the surrounding zinc porphyrin nanoring. We present a theoretical model that reproduces the absorption spectrum of the nanoring and quantifies the excitonic coupling between the nanoring and the central dye, thereby explaining the efficient energy transfer and demonstrating similarity with structurally related natural light‐harvesting systems.     

Benzimidazole‐indole‐chalcone connected methacrylate‐based side chain D‐π‐A polymer and its application in organic photovoltaics

Herein, we report four metal‐free organic polymethacrylates (In‐In‐BzI)PMA , (Ac‐In‐BzI)PMA , (TPA‐In‐BzI)PMA , and (Py‐In‐BzI)PMA with pendant chromophores donor‐π‐conjugated‐acceptor (D‐π‐A) molecular framework as photosensitizers for dye‐sensitized solar cells (DSSCs). In which the donor‐acceptor units are attached by an indole‐chalcone extending side chain to inhibit back electron transfer and charge recombination; the π‐linker component contains varied chalcone‐based substituents to enhance the sunlight‐harvesting ability of the solar device. Photon‐current cells based on the DSSC format were fabricated using the polymers as sensitizers. The DSSC device assembled using (TPA‐In‐BzI)PMA exhibits a considerably better IPCE peak and J–V response, with an overall power conversion efficiency of 3.70% under the illumination of AM 1.5G (100 mW cm^–2). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 997–1007     

Combining Light Harvesting and Electron Transfer in Silica–Titania‐Based Organic–Inorganic Hybrid Materials

A convenient protocol to fabricate an organic–inorganic hybrid system with covalently bound light‐harvesting chromophores (stilbene and terphenylene–divinylene) and an electron acceptor (titanium oxide) is described. Efficient energy‐ and electron‐transfer processes may take place in these systems. Covalent bonding between the acceptor chromophores and the titania/silica matrix would be important for electron transfer, whereas fluorescence resonant energy transfer (FRET) would strongly depend on the ratio of donor to acceptor chromophores. Time‐resolved spectroscopy was employed to elucidate the detailed photophysical processes. The coupling of FRET and electron transfer was shown to work coherently to lead to photocurrent enhancement. The photocurrent responses reached a maximum when the hybrid‐material thin film contained 60 % acceptor and 40 % donor.     

Additive‐Free Green Light‐Induced Ligation Using BODIPY Triggers

Photochemical ligation is important in biomaterials engineering for spatiotemporal control of biochemical processes. Such reactions however generally require activation by high energy UV or short wavelength blue light, which can limit their use as a consequence of the potential of these high energy light sources to damage living cells. Herein, we present an additive‐free, biocompatible, chemical ligation triggered by mild visible light. BODIPY dyes with a pendant thioether attached at the meso‐position undergo photolysis of the [C?S] bond under green light (λ=530 nm) excitation, producing an ion pair intermediate that can react specifically with a propiolate group. The utility of this photochemical ligation in materials science is demonstrated by the fabrication of hydrogels with specific architectures, photo‐immobilization of biomacromolecules, and live cell encapsulation within a hydrogel scaffold.     

Carbon Dots: Bottom‐Up Syntheses,Properties, and Light‐Harvesting Applications

The development of cost‐effective and environmentally friendly photocatalysts and photosensitizers has received tremendous attention because of their potential utilization in solar‐light‐harvesting applications. In this respect, carbon dots (CDs) prepared by bottom‐up methods have been considered to be promising light‐harvesting materials. Through their preparation from various molecular precursors and synthetic methods, CDs exhibit excellent optical and charge‐transfer properties. Furthermore, their photophysical properties can be readily optimized and enhanced by means of doping, functionalization, and post‐synthetic treatment. In this review, we summarize the recent progress in CDs synthesized using bottom‐up approaches. These CDs exhibit strong light absorption and unique electron donor/acceptor capabilities for light‐harvesting applications. We anticipate that this review will provide new insights into novel types of photosensitizers and photocatalysts for a wide range of applications.     

Control of Energy Transfer Between Pyrene- and Perylene-Nucleosides by the Sequence of DNA-Templated Supramolecular Assemblies

DNA was used as supramolecular scaffold to order chromophores and control their optical properties. Ethynylpyrene as energy donor was attached to 2′-desoxy-2-aminoadenosine that binds selectively to thymidines (T) in the template. Ethynylperylene as acceptor was attached to 2′-desoxyuridine that is complementary to 2′-desoxyadenosine (A). This donor-acceptor pair was assembled along single-stranded DNA templates of different A−T sequences to investigate the sequence control of the energy transfer between the chromophores. The fluorescence intensities increase in the mixed assemblies along the DNA templates from A₁₀T₁₀ over (AATT)₅ to (AT)₁₀, although these templates provide equal numbers of potential binding sites for the two different nucleoside chromophore conjugates and exhibit similar absorbances. This shows that the sequence selective assembly of the two building blocks along DNA templates is programmable and alters the fluorescence readout. Such sequence-controlled supramolecular chemistry represents the key element for future functional π-systems in materials for light harvesting of solar energy.     

Synthesis and Photovoltaic Properties of Boron β‐Ketoiminate Dyes Forming a Linear Donor‐π‐Acceptor Structure

Organoboron complexes are of interest as chromophores for dye sensitizers owing to their light‐harvesting and carrier‐transporting properties. In this study, compounds containing boron β‐ketoiminate (BKI) as a chromophore were synthesized and used as dye sensitizers in dye‐sensitized solar cells. The new dyes were orange or red crystals and showed maximum absorptions in the 410–450 nm wavelength region on titanium dioxide substrates. These electrodes exhibited maximum efficiencies of over 80% in incident photon‐to‐current conversion efficiency spectra, suggesting that the continuous process of light absorption‐excitation‐electron injection was effectively performed. Open‐circuit photovoltages were relatively high owing to the large dipole moments of the BKI dyes with a linear molecular structure. Thus, a maximum power conversion efficiency of 5.3% was successfully observed. Comparison of BKI dyes with boron β‐diketonate dyes revealed certain differences in solution stability, spectral properties, and photovoltaic characteristics.     

Ultrafast fluorescence investigation of excitation energy transfer in different dendritic core branched structures

The mechanism of energy transport in branching structures is suggestively related to the geometry of the multichromophore architecture. In organic conjugated dendrimers, both incoherent (hopping) and coherent energy transfer processes have been observed from different dendritic architectures with different building blocks. In this communication, we report the investigation of three fundamental dendritic architectures (G0) with the same attached chromophores, but with different core atoms, C, N, and P. The synthesis of a phosphorus-containing G0 system with distyrylbenzene chromophores is provided. These three systems provide a comparison by which the relative interaction of branching chromophores can be compared on the basis of their different branching centers. Ultrafast fluorescence anisotropy measurements provide a dual measure of the geometry of the chromophores around the different central units as well as the strength of the interactions among chromophores. The nitrogen-cored system appeared to have both the strongest coupling of chromophore excitation as well as the most planar geometry of the three. Interestingly, the phosphorus system appeared to have the least planar geometry, and its interaction strength was found to be stronger than that observed for the carbon system. These results provide a comparison of the energy migration dynamics of the most common and new dendritic architectures with applications for light emission and light harvesting.