Highly Efficient Perovskite Solar Cells Employing an Easily Attainable Bifluorenylidene‐Based Hole‐Transporting Material

The 4,4′‐dimethoxydiphenylamine‐substituted 9,9′‐bifluorenylidene ( KR216 ) hole transporting material has been synthesized using a straightforward two‐step procedure from commercially available and inexpensive starting reagents, mimicking the synthetically challenging 9,9′‐spirobifluorene moiety of the well‐studied spiro‐OMeTAD. A power conversion efficiency of 17.8 % has been reached employing a novel HTM in a perovskite solar cells.     

2,5‐Difluorenyl‐Substituted Siloles for the Fabrication of High‐Performance Yellow Organic Light‐Emitting Diodes

2,3,4,5‐Tetraarylsiloles are a class of important luminogenic materials with efficient solid‐state emission and excellent electron‐transport capacity. However, those exhibiting outstanding electroluminescence properties are still rare. In this work, bulky 9,9‐dimethylfluorenyl, 9,9‐diphenylfluorenyl, and 9,9′‐spirobifluorenyl substituents were introduced into the 2,5‐positions of silole rings. The resulting 2,5‐difluorenyl‐substituted siloles are thermally stable and have low‐lying LUMO energy levels. Crystallographic analysis revealed that intramolecular π–π interactions are prone to form between 9,9′‐spirobifluorene units and phenyl rings at the 3,4‐positions of the silole ring. In the solution state, these new siloles show weak blue and green emission bands, arising from the fluorenyl groups and silole rings with a certain extension of π conjugation, respectively. With increasing substituent volume, intramolecular rotation is decreased, and thus the emissions of the present siloles gradually improved and they showed higher fluorescence quantum yields (Φ_F=2.5–5.4 %) than 2,3,4,5‐tetraphenylsiloles. They are highly emissive in solid films, with dominant green to yellow emissions and good solid‐state Φ_F values (75–88 %). Efficient organic light‐emitting diodes were fabricated by adopting them as host emitters and gave high luminance, current efficiency, and power efficiency of up to 44 100 cd m^?2, 18.3 cd A^?1, and 15.7 lm W^?1, respectively. Notably, a maximum external quantum efficiency of 5.5 % was achieved in an optimized device.     

Polymer Light-emitting Diodes Based on End-capped Poly[9,9-di-(2'-ethylhexyl)fluorenyl-2,7-diyl]

We demonstrate polymer light‐emitting diodes (LEDs) based on poly[9,9‐di‐(2′‐ethylhexyl)fluorenyl‐2,7‐diyl] with end capper dimethylphenyl or N,N‐bis(4‐methylphenyl)‐N‐phenylamine. The introduction of end‐capper groups increased the device luminance and efficiency, while greatly depressing the green emission. For the devices constructed of poly[9,9‐di‐(2′‐ethylhexyl)fluorenyl‐2,7‐diyl] end capped with dimethylphenyl, the maximum luminance reached 381 cd/m² at 122 mA/cm². The maximum external quantum efficiency was 0.16% at 117 mA/cm², which is more than five times higher than that of the non‐end‐capped polymer LEDs. The electroluminescence (EL) maximum was at 485 nm, blue shifted by 52 nm with respect to that of the non‐end‐capped polyfluorene devices. It is proposed that efficient hole trapping at end capper and increased resistance of polyfluorene to oxidation are responsible for the improved device performance and color stability.     

Synthesis of polyethylene and polypropylene containing fluorene units in the side chain

Copolymerizations of ethylene or propylene and allyl monomers containing 9‐fluorenyl group, diallyl‐di‐9‐fluorenylsilane (DAFS), 9,9‐diallylfluorene (DAF), and 9‐allylfluorene (AF), were investigated with various zirconocene catalysts using methylaluminoxane as a cocatalyst. The bridged zirconocene catalysts, especially a syndioselective catalyst, showed a higher reactivity for all the comonomers than the nonbridged catalysts. DAFS was mainly incorporated into the polymer chain via cyclization insertion, whereas DAF was copolymerized via both 1,2‐ and cyclization insertions. Cyclization selectivity, ratio of cyclized insertion unit, of DAF in the copolymerization with propylene was higher than that in the copolymerization with ethylene. Copolymerization with AF yielded low‐molecular weight copolymer because of frequent chain transfer reaction. Optical properties of the propylene based‐copolymers were investigated by UV‐vis and photoluminescence spectroscopy, and absorption‐ and emission‐derived from fluorenyl groups were detected in the copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3542–3552, 2010     

Modulating the Optoelectronic Properties of Large,Conjugated, High‐Energy Gap,Quaternary Phosphine Oxide Hosts: Impact of the Triplet‐Excited‐State Location

The purposeful modulation of the optoelectronic properties was realised on the basis of a series of the large, conjugated, phosphine oxide hosts 9,9‐bis‐{4′‐[2‐(diphenylphosphinoyl)phenoxy]biphenyl‐4‐yl}‐9H‐fluorene (DDPESPOF), 9,9‐bis‐{3′‐(diphenylphosphinoyl)‐4′‐[2‐(diphenylphosphinoyl)phenoxy]biphenyl‐4‐yl}‐9H‐fluorene (DDPEPOF), 9‐[4′‐(9‐{4′‐[2‐(diphenylphosphoryl)phenoxy]biphenyl‐4‐yl}‐9H‐fluoren‐9‐yl)biphenyl‐4‐yl]‐9H‐carbazole (DPESPOFPhCz) and 9‐[4′‐(9‐{3′‐(diphenylphosphoryl)‐4′‐[2‐(diphenylphosphoryl)phenoxy]biphenyl‐4‐yl}‐9H‐fluoren‐9‐yl)biphenyl‐4‐yl]‐9H‐carbazole (DPEPOFPhCz). The last two are quaternary with fluorenyls as linking bridges, diphenylphosphine oxide (DPPO) moieties as electron acceptors and diphenylethers and carbazolyls as two different kinds of electron donors. Owing to the fine‐organised molecular structures and the mixed indirect and multi‐insulating linkages, all of these hosts achieve the same first triplet energy levels (T₁) of 2.86 eV for exothermic energy transfer to phosphorescent dopants. The first singlet energy levels (S₁) and the carrier injection/transportation ability of the hosts were accurately modulated, so that DPESPOFPhCz and DPEPOFPhCz revealed extremely similar optoelectronic properties. However, the T₁ state of the former is localised on fluorenyl, whereas the carbazolyl mainly contributes to the T₁ state of the latter. A lower driving voltages and much higher efficiencies of the devices based on DPESPOFPhCz indicated that the chromophore‐localised T₁ state can suppress the quenching effects through realising independent contributions from the different functional groups to the optoelectronic properties and the embedding and protecting effect on the T₁ states by peripheral carrier transporting groups.     

9,9′‐spirobifluorene‐containing polycarbonates: Transparent polymers with high refractive index and low birefringence

Syntheses of 2,2′‐bisalcoholic group‐substituted 9,9′‐spirobifluorene monomers 2 were performed by the reaction of 2,2′‐dihydroxy‐9,9′‐spirobifluorene 2a with haloalcohols. Polycarbonates consisting of 9,9′‐spirobifluorene skeleton in the main chain (PC 4 ) were synthesized by the polycondensation of 2,2′‐bisalcoholic monomers 2 and triphosgene or diphenyl carbonate. PC 4 showed good thermal stability: the 5% weight loss temperature was over 330 °C under both nitrogen and air atmospheres. The glass transition temperature was in a range of 16–269 °C estimated by differential scanning calorimetry, depending on the flexibility of the alkylene or oxyethylene chains of 2 . PC 4 showed high solubility toward ordinary organic solvents such as CHCl₃, benzene, and THF, making possible the preparation of the flexible thin films. Very high refractive index in a range of 1.62–1.66 at 589 nm was observed although PC 4 consists only of C, H, and O atoms, whereas very low degree of birefringence was confirmed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3658–3667, 2010     

The redox behavior of gem-dihalo compounds: 9,9-dibromofluorene, 9,9-dichlorofluorene and dichlorodiphenylmethane

The redox behavior of several gem-dihalo compounds has been examined at platinum and vitreous carbon electrodes in dimethylformamide. The reduction of 9,9-dichlorofluorene is initially an overall two-electron process which involves cleavage of chloride ion and the formation of 9-chlorofluorenyl anion. The final products and their distribution are then dependent upon the relative rates of reduction of the parent compound, nucleophilic attack of 9-chlorofluorenyl anion on the parent compound, and proton availability. If reaction by substitution is permitted to predominate, 9,9′-dichlorobifluorenyl results. This species is electroactive at the applied potential and undergoes reductive dechlorination to give bifluorenylidene. In contrast, if either the rate of reduction of 9,9-dichlorofluorene of the rate of protonation of 9-chlorofluorenyl anion exceeds the rate of substitution, the predominant product becomes 9-chlorofluorene. Reduction of this species then gives a mixture of fluorene and bifluorenyl when electrolysis is effected in an aprotic medium and fluorene when electrolysis is performed in the presence of diethyl malonate, a weak proton donor. Dichlorodiphenylmethane and 9,9-dibromofluorene also undergo reductive dehalogenation to give monomeric and dimeric products by pathways analogous to those observed for dichlorofluorene. In the case of dibromofluorene, however, the product distribution is also potential dependent since the intermediate 9-bromofluorenyl radical may not be reduced at the applied potential. No evidence was obtained in these studies to support previous claims of carbenes and/or carbene radical anions in these reductions.     

Synthesis and light‐emitting properties of carbazole‐based copolymers bearing cyano‐substituted arylenevinylene chromophore

Two arylenevinylene compounds bearing the cyano group at α‐position ( 6 ) and β‐position ( 9 ) from the dialkoxylphenylene unit were synthesized, in which the molecular termini were functionalized with 3‐bromocarbazole. The Suzuki coupling copolymerization of these compounds with 1,4‐bis[(3′‐bromocarbazole‐9′‐yl)methylene]‐2,5‐didecyloxybenzene and 9,9‐dihexylfluorene‐2,7‐bis(boronic acid) was carried out to obtain copolymers ( cp67 and cp97 ) containing the cyano‐substituted arylenevinylene fluorophore of 7 mol %. Model compounds ( 6 ′ and 9 ′) corresponding to the arylenevinylene fluorophore were also prepared. The UV spectra of copolymers resembled that of homopolymer hp with no arylenevinylene segment in both CHCl₃ solution and thin film. The emission maxima of copolymers in CHCl₃ (394 nm) agreed with that of homopolymer indicating that the emission bands originated from the carbazole‐fluorene‐carbazole segment. The emission maximum wavelength of copolymer cp67 in thin film (477 nm) indicated fluorescence from the cyano‐substituted arylenevinylene fluorophore because of the occurrence of fluorescence resonance electron transfer. In contrast, copolymer cp97 showed fluorescence at 528 nm to suggest the formation of a new emissive species such as a charge‐transfer complex (exciplex). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 91–98, 2010     

Synthesis and property of polyoxazolidone having fluorene moiety by polyaddition of diisocyanate and diepoxide

Polyoxazolidones having fluorenyl group were synthesized by polyaddition of 9,9‐diglycidyl fluorene with various diisocyanates. The polymer from 9,9‐diglycidyl fluorene and methylenediphenyl 4,4′‐diisocyanate was afforded in high yield although polydispersity of the polymer was found relatively broad. The IR spectrum of the obtained polymer showed two absorption in carbonyl region. One of them was assigned to the expected oxazolidone, while the other at 1710 cm^?1 appeared due to a carbonyl group of the isocyanurate moieties produced by cyclotrimerization of isocyanate. It is assumed that the cyclotrimerization would cause the broad polydispersity caused by the branched structure formed by isocyanurate. The polymers obtained with three kinds of diisocyanates (methylenediphenyl 4,4'‐diisocyanate, 1,6‐hexamethylene diisocyanate, 1,4‐phenylene diisocyanate) showed high thermal stability, as their T_d10 was depended on the structure of diisocyanate. All polymers had high transparency in a visible region. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1755–1760     

New approaches towards the synthesis and characterization of alkoxy substituted spirobifluorenes and spirosilabifluorenes for organic optoelectronics

Alkoxy substituted spirobifluorene derivatives namely 2,2′,7,7′-tetrabromo-3,6-bis(methoxy)-9,9′spirobifluorene (MSBF), 2,2′,7,7′-tetrabromo-3,6-bis(ethoxy)-9,9′spirobifluorene (ESBF), 2,2′,7,7′-tetrabromo-3,6-bis(butoxy)-9,9′spirobifluorene (BSBF), 2,2′,7,7′-tetrabromo-3,3′,6,6′-tetra(methoxy)-9,9′-spiro-9-silabifluorene (MSSiBF) and their key intermediates have been synthesised successfully. All compounds have been fully characterised by ¹H and ¹³C NMR, FTIR, UV-visible spectroscopy, MS spectrometry. TGA analysis revealed good thermal stability. The systematic investigation on the solubility, thermostability and photophysical property of synthesized compound showed that alkoxy substituted spirobifluorene were unique in rigidity and have wide range of applications in molecular electronics and can be used as building units for optoelectronics material.     

Synthesis and properties of highly refractive polyimides derived from fluorene‐bridged sulfur‐containing dianhydrides and diamines

Highly refractive and transparent polyimides (PIs) based on fluorene‐bridged and sulfur‐containing monomers have been developed. An aromatic dianhydride, 4,4′‐[p‐thiobis(phenylenesulfanyl)]diphthalic anhydride (3SDEA), was polymerized with several fluorene‐containing diamines, including commercially available 9,9′‐bis(p‐aminophenyl)fluorene (APF), 9,9′‐bis[4‐(p‐aminophenoxy)phenyl]fluorene (OAPF), and newly synthesized 9,9′‐bis[4‐(p‐aminophenyl)sulfanylphenyl]fluorene (ASPF) to afford series A PIs. Meanwhile, series B PIs were obtained from a new dianhydride, 4,4′‐[(9H‐fluorene‐9‐ylidene)bis(p‐phenylsulfanyl)]diphthalic anhydride (FPSP) and two aromatic diamines, ASPF and 4,4′‐thiobis[(p‐phenylenesulfanyl)aniline] (3SDA) via a two‐step polycondensation procedure. The PIs exhibit good thermal stabilities, such as relatively high glass transition temperatures in the range of 220–270 °C and high initial thermal decomposition temperatures (T_10%) exceeding 490 °C. The 9,9′‐disubstituted fluorene moieties endow the PI films with good optical transparency. The optical transmittances of the PI films at 450 nm are all higher than 80% for the thickness of about 10 μm. Furthermore, the highly aromatic fluorene moiety and flexible thioether linkages in the molecular chains of the PIs provide them with high refractive indices of 1.6951–1.7258 and small birefringence of 0.0056–0.0070. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1510–1520, 2008     

Optical and electronic properties of fluorene‐based copolymers and their sensory applications

A series of novel, fluorene‐based conjugated copolymers, poly[(9,9‐bis{propenyl}‐9H‐fluorene)‐co‐(9,9‐dihexyl‐9H‐fluorene)] ( P1 ), poly[(9,9‐bis{carboxymethylsulfonyl‐propyl}fluorenyl‐2,7‐diyl)‐co‐(9,9‐dihexyl‐9H‐fluorene)] ( P2 ) and poly[(9,9‐dihexylfluorene)‐co‐alt‐(9,9‐bis‐(6‐azidohexyl)fluorene)] ( P3 ), are synthesized by Suzuki coupling reactions and their electrochemical properties, in the form of films, are investigated using cyclic voltammetry. The results reveal that the polymer films exhibit electrochromic properties with a pseudo‐reversible redox behavior; transparent in the neutral state and dark violet in the oxidized state. Among the three polymers, P2 possesses the shortest response time and the highest coloration efficiency value. These polymers emit blue light with a band gap value of around 2.9 eV and have high fluorescent quantum yields. Their metal ion sensory abilities are also investigated by titrating them with a number of different transition metal ions; all of these polymers exhibit a higher selectivity toward Fe³⁺ ions than the other ions tested with Stern–Volmer constants of 4.41 × 10⁶M^?1, 3.28 × 10⁷M^?1, 1.25 × 10⁶M^?1, and 6.56 × 10⁶M^?1 for P1 , P2 , water soluble version of P2 ( P2S ) and P3 , respectively. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

A [2+2+2]‐Cyclotrimerization Approach to Selectively Substituted Fluorenes and Fluorenols,and Their Conversion to 9,9′‐Spirobifluorenes

Synthesis of selectively substituted fluorenes and fluorenols was achieved by using catalytic [2+2+2]cyclotrimerization. Various starting diynes were reacted with different alkynes in the presence of a catalytic amount of Wilkinson’s catalyst (RhCl(PPh₃)₃) providing the compounds possessing the fluorene scaffold in good isolated yields. A set of four regioselectively substituted fluorenols was converted to the corresponding 9,9′‐spirobifluorenes and their spectral characteristics were measured.     

Cationic,water‐soluble,fluorene‐containing poly(arylene ethynylene)s: Effects of water solubility on aggregation,photoluminescence efficiency,and amplified fluorescence quenching in aqueous solutions

Three novel fluorene‐containing poly(arylene ethynylene)s with amino‐functionalized side groups were synthesized through the Sonogashira reaction. They were poly{9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene}‐alt‐co‐{2,5‐bis[3′‐(N,N‐diethylamino)‐1′‐oxapropyl]‐1,4‐phenylene} ( P1 ), poly{9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene} ( P2 ), and poly({9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene}‐alt‐co‐(1,4‐phenylene)) ( P3 ). Through the postquaternization treatment of P1 – P3 with methyl iodide, we obtained their cationic water‐soluble conjugated polyelectrolytes (WSCPs): P1′ – P3′ . The water solubility was gradually improved from P3′ to P1′ with increasing contents of hydrophilic side chains. After examining the ultraviolet–visible absorption and photoluminescence (PL) spectra, fluorescence lifetimes, and dynamic light scattering data, we propose that with the reduction of the water solubility from P1′ to P3′ , they exhibited a gradually increased degree of aggregation in H₂O. The PL quantum yields of P1′ – P3′ in H₂O displayed a decreasing tendency consistent with the increased degree of aggregation, suggesting that the pronounced degree of aggregation was an important reason for the low PL quantum yields of WSCPs in H₂O. Two structurally analogous water‐soluble trimers of P2′ and P3′ , model compounds 2,7‐bis(9″,9″‐bis{6‴‐[(N,N‐diethyl)‐N‐methylammonium] hexyl}‐2″‐fluorenylethynyl)‐9,9‐bis{6′‐[(N,N‐diethyl)‐N‐methylammonium]hexyl}fluorene hexaiodide and 1,4‐bis(9′,9′‐bis{6″‐[(N,N‐diethyl)‐N‐methylammonium]hexyl}‐2′‐fluorenylethynyl)benzene tetraiodide, were synthesized. The amplified fluorescence quenching of these WSCPs by Fe(CN)₆⁴⁻ in H₂O was studied by comparison with a corresponding analogous trimer. The effects of aggregation on the fluorescence quenching may be two‐edged in these cases. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5778–5794, 2006     

Donor–acceptor semiconducting polymers based on pyromellitic diimide

Three donor–acceptor copolymers P1 , P2 , and P3 with N,N′‐dodecylpyromellitic diimide as the electron‐acceptor unit with three diethynyl‐substituted donor monomers: 1,4‐diethynyl‐2,5‐bis(octyloxy)benzene, 2,7‐diethynyl‐9,9‐dioctyl‐9H‐fluorene, and 3,3′‐didodecyl‐5,5′‐diethynyl‐2,2′‐bithiophene have been synthesized by Sonogashira crosscoupling polymerization. The synthesized polymers showed deep highest occupied molecular orbital energy levels and larger band gaps (>2.5 eV). Polymers P1 , P2 , and P3 underwent fluorescence quenching with [6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM), indicating the intermolecular photo‐induced charge transfer between the donor polymers and the PCBM acceptor. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1617–1622     

Arylamino‐functionalized fluorene‐ and carbazole‐based copolymers: Color‐tuning their CdTe nanocrystal composites from red to white

Four alternating arylamino‐functionalized copolymers were synthesized in a Suzuki copolymerization applying 4, 4′‐(2,7‐dibromo‐9H‐fluorene‐9,9‐diyl)dianiline, 4,4′‐(2,7‐dibromo‐9H‐fluorene‐9,9‐diyl)bis(N,N‐diphenylaniline), 4‐(3,6‐dibromo‐9H‐ carbazol‐9‐yl)aniline and 4‐(3,6‐dibromo‐9H‐carbazol‐9‐yl)‐N,N‐diphenylaniline in combination with 2,2′‐(9,9‐dioctyl‐9H‐fluorene‐2,7‐diyl)bis(1,3,2‐dioxaborinane). The resulting novel alternating copolymers were fully characterized. The copolymers revealed blue light emission and wide optical bandgaps of at least 2.93 eV for the fluorene‐based and 3.07 eV for the carbazole‐based polymers. The amino‐functions allow to tie semiconducting CdTe nanocrystals (NCs) and to synthesize a series of composites with CdTe NCs. Moreover, tuning the emission color over a wide range by tying these CdTe NCs results in a facile preparation of organic–inorganic semiconductor composites with emission colors “à la carte.” © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Copolymerization of ethene and propene in the presence of Cs symmetric group 4 metallocenes and methylaluminoxane

Ethene–propene copolymerizations were performed in the presence of C_s symmetric group 4 metallocenes. The reactivity ratios were strongly influenced by both the transition metal and the ancillary ligands. Substantially alternate, almost random, and blocky copolymers were obtained with titanocene, zirconocene, and hafnocene, respectively, with the bis(dimethylsilyl)‐1,1′‐2,2′‐diyl‐(3′,5′‐diisopropyl)(4‐isopropyl)‐(cyclopentadienyl) ligand, and a blocky copolymer was obtained with (diphenyl methylidene)(cyclopentadienyl)(9‐fluorenyl)TiCl₂. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3249–3255, 2002     

Diinsertion of fluorenylidene into a sulfur-sulfur bond of diaryl disulfides

Upon irradiation (>340 nm) of a benzene solution of diazofluorene with di-p-tolyl- or di-p-anisyl disulfide, the corresponding 9,9′-bis(arylmercapto)bifluorenyl was afforded in moderate to good yield accompanied by formation of 9,9′-bis(arylmercapto)fluorene. The major reaction pathway is considered to be a disulfur ylide formation followed by two times of successive Stevens rearrangement or by concerted electron redistribution via [2,3]sigmatropic rearrangement.     

“Hummingbird” Behaviour of N‐Heterocyclic Carbenes Stabilises Out‐of‐Plane Bonding of AuCl and CuCl Units

An N‐heterocyclic carbene substituted by two expanded 9‐ethyl‐9‐fluorenyl groups was shown to bind an AuCl unit in an unusual manner, namely with the Au?X rod sitting out of the plane defined by the heterocyclic carbene unit. As shown by X‐ray studies and DFT calculations, the observed large pitch angle (21°) arises from an easy displacement of the gold(I) atom away from the carbene lone‐pair axis, combined with the stabilisation provided by weak CH???Au interactions involving aliphatic and aromatic H atoms of the NHC wingtips. Weak, intermolecular Cl???H bonds are likely to cooperate with the H???Au interactions to stabilise the out‐of‐plane conformation. A general belief until now was that tilt angles in NHC complexes arise mainly from steric effects within the first coordination sphere.     

π Groups in ion pair bonding: the structural effects of reduction on the olefinic bond as observed in the molecular structure of Δ9,9′-bifluorenyl bis(lithium tetramethylethylenediamine)

The reaction of 9,9′-bifluorene with n-butyllithium in the presence of tetramethylethylenediamine (TMEDA) results in the formation of Δ^9,9′-bifluorenyl bis-(lithium tetramethylethylenediamine). In the molecular structure of this material, which formally can be considered to be the dianion of the olefin Δ^9,9′-bifluorene, two TMEDALi groups are closely associated with the 9,9′ bond. The fluorenyl groups are twisted relative to each other by an angle of 48.0(5)°, as compared to 42° in the parent olefin. The 9,9′ bond length is increased from 1.39(2) Å in Δ^9,9′-bifluorene to 1.487(5)Å in the dianion.Single crystal X-ray diffraction techniques were used and resulted in a final discrepancy factor of R_w = 0.064 for 2426 observations. The crystal system is monoclinic (C2/c) with a = 10.814(3), b = 16.717(6) and c = 19.766(6) Å, β = 102.55(2)°; ?_obs = 1.10(3) g cm^?3; ?_calc = 1.095 g cm^?3 for four molecules per unit cell.