Synthesis and structure of 9,10-bis(2,4,6-triisopropylphenyl)-9,10-dihydro-9,10-disilaanthracene

We prepared a 9,10-dihydro-9,10-disilaanthracene (DSA) derivative 4 bearing a bulky aryl substituent, a 2,4,6-triisopropylphenyl (Tip) group, on the silicon atoms via a Wurtz-type coupling reaction between two molecules of (2-chlorophenyl)(2,4,6-triisopropylphenyl)silane (3) in a head-to-tail fashion. The structural determination of cis-4 and trans-4 was examined using ¹H NMR spectroscopy and theoretical calculations. In addition, the molecular structure of cis-4 was unambiguously determined by X-ray crystallography. The tricyclic DSA skeleton of cis-4 adopts a folded structure with a boat-like central ring in which the rotation about the Si-Tip bond is restricted. In contrast, theoretical calculations suggest that the tricyclic DSA skeleton of trans-4 has an almost planar structure.     

A crystal structure of mixed-metal dianionic phosphate Cs3.70Mg0.60Ti2.78(TiO)3(P2O7)4(PO4)2

The single crystals of caesium magnesium titanium (IV) tri-oxo-tetrakis-diphosphate bis-monophosphate, Cs_3.70Mg_0.60Ti_2.78(TiO)₃(P₂O₇)₄(PO₄)₂, crystallize in sp. gr. P-1 (No. 2) with cell parameters a=6.3245(4), b=9.5470(4), c=15.1892(9) Å, α=72.760(4), β=85.689(5), γ=73.717(4), z=1. The titled compound possesses a three-dimensional tunnel structure built by the corner-sharing of distorted [TiO₆] octahedra, [Ti₂O₁₁] bioctahedra, [PO₄] monophosphate and [P₂O₇] pyrophosphate groups. The Cs⁺ cations are located in the tunnels. The partial substitution of Ti positions with Mg atoms is observed. The negative charge of the framework is balanced by Cs cations and Mg atoms leading to pronounced concurrency and orientation disorder in the [P₂O₇] groups, which coordinate both.     

Synthesis, structure and theoretical study of two rhodium(I) complexes [Rh(TropNMe)(CO)(PPh3)] and [Rh(Trop)(CO)(PPh3)] · Acetone

Rhodium(I) complexes [Rh(TropNMe)(CO)(PPh₃)] (TropNMe = 2-(N-methylamino)tropone, ONC₈H₉) (1) and [Rh(Trop)(CO)(PPh₃)] · Acetone (Trop = Tropolone, O₂C₇H₆) (2) have been synthesized and characterized by single-crystal X-ray diffraction analysis. A distorted square planar geometry about the rhodium(I) metal centre is observed in both compounds 1 and 2. Substitution of an oxygen atom with a methyl functionalized nitrogen atom does not significantly alter the bond distances and angles in the rhodium(I) complex. A theoretical study at B3LYP/6-31G(d) (main group) and LANL2DZ (Rh) level is presented to clarify the solid state behaviour of these complexes.     

A new mesogenic fluorene derivative: 2,7-bis(4-pentylphenyl)-9,9-diethyl-9H-fluorene

The title compound, 2,7-bis(4-pentylphenyl)-9,9-diethyl-9H-fluorene, is a new mesogenic compound containing the fluorene moiety. It exhibits a monotropic nematic liquid crystalline behaviour, with isotropisation temperature of 53°C. The compound is also polymorphic in the solid state, with one crystal phase melting at 103°C and another one melting at 71°C. The crystal and molecular structure of the high melting solid phase have been determined from single crystal X-ray diffraction analysis. Crystals are monoclinic, with cell dimensions a = 16.649(6) Å, b = 8.305(3) Å, c = 24.598(7) Å, β = 111.60(2)?, space group P2₁/c and four molecules in the unit cell. Refinement leads to R = 0.0558. The two terminal alkyl chains and one phenyl ring are disordered over two split positions. The imbricated molecular packing observed in the solid state seems to resemble that of the nematic phase that is formed upon cooling the melt.     

Crystal structure of the benzene solvate of bis[2-(o-diphenylphosphorylphenoxy)ethyl] ether

Using x-ray diffraction analysis, we have determined the molecular structure of the phosphorus-containing podand bis[2-(o-diphenylphosphorylphenoxy) ethyl] ether in the crystal of its benzene solvate. We have established a considerable difference between the conformations of the free podand and its (previously studied) "guest—host" complex with an organic ammonium cation.Institute of Physiologically Active Substances, Russian Academy of Sciences, 142432 Chernogolovka. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 3, pp. 624–629, March, 1992.     

New poly(amide-lmide)s syntheses. XV. Preparation and properties of poly(amide-imide)s derived from 9, 9-bis[4-(4-aminophenoxy) phenyl]fluorene and various bis(trimellitimide)s

Fifteen bis(phenoxy) fluorene-containing poly(amide-imide)s III were synthesized by the direct polycondensation of 9,9-bis[4-(4-aminophenoxy)phenyl]fluorene (BAPPF) with var-ious aromatic bis(trimellitimide)s II in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. Poly(amide-imide)s III having inherent vis-cosities up to 1.45 dL/g were obtained in quantitative yields. Most of the resulting polymers showed an amorphous nature and were readily soluble in polar solvents such as NMP and N,N-dimethylacetamide. All the soluble poly(amide-imide)s afforded transparent, flexible, and tough films. The glass transition temperatures of these polymers were in the range of 263–315°C and the 10% weight loss temperatures were above 510°C in nitrogen. Some properties of poly(amide-imide)s III were compared with those of the corresponding isomeric poly(amide-imide)s III ′ prepared from 9,9-[4-(4-trimellitimidophenoxy)phenyl]fluorene and various aromatic diamines. © 1995 John Wiley & Sons, Inc.     

Interaction of dihydroxy host systems with glycols. A comparative study of the crystal structures of 1:1 molecular complexes of 1,4-butanediol with 2,5-bis(4-chlorophenyl)hydroquinone andtrans-9,10-dihydroxy-9,10-diphenyl-9,10-dihydroanthracene

The title compounds crystallize in space groupC2/c withZ=4; C₁₈H₁₂O₂Cl₂·HO(CH₂)₄OH,a=16.186(3),b=7.626(1),c=16.939(3) Å, =91.32(2)°,R _F =0.048 for 1743 observed MoK reflections; C₂₆H₂₀O₂·HO(CH₂)₄OH,a=11.881(3),b=13.009(4),c=16.689(4) Å, =110.67(2)°,R _F =0.066 for 1783 data points. Both structures feature centrosymmetric hydrogen-bonded (OH)₄ rings formed by molecular components located in special positions. Different packing modes account for the observed conformations (g ⁺ ag ^– andaaa, respectively) of 1,4-butanediol and its possible replacement by 1,2-ethanediol as a guest in the former crystal structure. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82009 (25 pages).Dedicated to Professor H. M. Powell.     

Poly[4,6-bis(bis(4-methoxyphenyl)aminium)-1,2-phenylenevinylene]: A high-spin and durable polyradical

A purely organic and high-spin polyradical molecule was synthesized, along the non-Kekulé and non-disjoint design of the π-conjugated poly(1,2-phenylenevinylene) backbone pendantly 4,6-substituted with the robust arylaminium radicals. 4,6-Bis(bis(4-methoxyphenyl)amino)-2-bromostyrene was synthesized and polymerized with a Pd–phosphine catalyst to afford the head-to-tail linked polyradical precursor. Oxidation of the polymer with SbCl₅ gave the aminium polyradical with a half-life of >10 days at room temperature. A high-spin ground state with an average S = 5/2 for this polyradical was proved by magnetic susceptibility and ESR.     

Synthesis and structural characterization of A3In2Ge4 and A5In3Ge6 (A=Ca, Sr, Eu, Yb)—New intermetallic compounds with complex structures, exhibiting Ge-Ge and In-In bonding

Reported are the synthesis and the structural characterization of four new polar intermetallic phases, which exist only with mixed alkaline-earth and rare-earth metal cations in narrow homogeneity ranges. (Sr_1-xCa_x)₅In₃Ge₆ and (Eu_1-xYb_x)₅In₃Ge₆ (x≈0.7) crystallize in the orthorhombic space group Pnma with two formula units per unit cell (own structure type, Pearson symbol oP56). The lattice parameters are as follows: a=13.109(3)-13.266(3) Å, b=4.4089(9)-4.4703(12) Å, and c=23.316(5)-23.557(6) Å. (Sr_1-xCa_x)₃In₂Ge₄ and (Sr_1-xYb_x)₃In₂Ge₄ (x≈0.4-0.5) adopt another novel monoclinic structure-type (space group C2/m, Z=4, Pearson symbol mS36) with lattice parameters in the range a=19.978(2)-20.202(2) Å, b=4.5287(5)-4.5664(5) Å, c=10.3295(12)-10.3447(10) Å, and β=98.214(2)-98.470(2)°, depending on the metal cations and their ratio. The polyanionic sub-structures in both cases are based on chains of InGe₄ corner-shared tetrahedra. The A₅In₃Ge₆ structure (A=Sr/Ca or Sr/Yb) also features Ge₄ tetramers, and isolated In atoms in nearly square-planar environment, while the A₃In₂Ge₄ structure (A=Sr/Ca or Eu/Yb) contains zig-zag chains of In and Ge strings with intricate topology of cis- and trans-bonds. The experimental results have been complemented by tight-binding linear muffin-tin orbital (LMTO) band structure calculations.     

(4R)-4-Hydroxy-1-nitroso-l-proline: synthesis, X-ray structure, ab initio and conformational calculations

4-Hydroxy-l-proline, an amino acid, an important component of collagen, was transformed into its N-nitroso-derivative, (4R)-4-hydroxy-1-nitroso-l-proline, 1 by butylnitrite in the acidic medium. The structure is a cyclic hydroxy-N-nitrosoacid with the carboxyl and hydroxyl groups trans to each other. The carboxyl group is in the syn-conformation. In the structure, the neutral molecules are connected via classical intermolecular O-H?O hydrogen bonds involving the hydroxyl and carboxyl groups [O?O=2.6251(14) Å], and form chains along the a-axis direction. The chains are linked into sheets via O-H?O hydrogen bond, [O?O=2.6813(15) Å] with participation of oxygen atom of nitroso group. Ab initio calculations based on density functional theory at the B3LYP/6-311++G(d, p) level of theory were performed to analyze the influence of 4-hydroxy-l-proline (Hyp) nitrosation on the conformation of the synthesized N-nitroso-compound. The geometry optimization of 1 and initial 4-hydroxy-l-proline was carried out in the gas phase and in solution using the polarizable continuum model. The single-point calculation was performed for the crystal structure of 1. The most stable conformer of 1 is observed in an aqueous solution. In this state, the pyrrolidine ring adopts an envelope conformation, which is also maintained in the gas phase. The twisted conformation of the pyrrolidine ring is present in all states of Hyp and in the crystal structure of 1. In 1 the interchange of five-membered ring conformation in solution and in the gas phase in comparison with the crystal is accompanied by an increase of the dipole moment of the molecule, which is maximal in solution.     

Preparation and crystal structure of [Bi3I(C4H8O3H2)2(C4H8O3H)5]2Bi8I30 containing the novel polynuclear [Bi8I30] anion

Preparation and crystal structure of the novel compound [Bi₃I(C₄H₈O₃H₂)₂(C₄H₈O₃H)₅]₂Bi₈I₃₀ are reported. The title compound is prepared by heating of BiI₃ and diethylene glycol at 413 K in a sealed quartz glass tube filled with argon. Deep red single crystals are grown and applied to perform X-ray powder diffraction and X-ray single-crystal diffraction measurements. The compound crystallizes triclinic with space group P-1: Z=2, a=13.217(1) Å, b=15.277(1) Å, c=22.498(1) Å, α=84.33(1), β=73.18(1), γ=67.48(1). [Bi₃I(C₄H₈O₃H₂)₂(C₄H₈O₃H)₅]₂Bi₈I₃₀ comprises the novel polynuclear [Bi₈I₃₀]⁶⁻ anion and [Bi₃I(C₄H₈O₃H₂)₂(C₄H₈O₃H)₅]³⁺ as the cation. Cation as well as the anion can be assumed to represent intermediates between solid BiI₃ and BiI₃ completely dissolved in diethylene glycol.     

Molecular saddles. 4. Redox-active cyclophanes by bridging the 9,10-bis(1,3-dithiol-2-ylidene)-9,10-dihydroanthracene system: synthesis, electrochemistry, and X-ray crystal structures of neutral species and a dication salt.

We report the synthesis of a new series of cyclophanes 11a-d by ester-forming macrocyclization reactions of diol 9 with the dicarbonyl chloride derivatives of benzene, thiophene, ferrocene, and diphenyl ether, 10a-d, respectively. Compounds 11a-d display a two-electron, quasireversible oxidation wave in the cyclic voltammogram to yield the dication species at Eoxpa = 0.70-0.72 V (for 11a-c) and 0.47 V (for 11d) (vs Ag/AgCl in acetonitrile). The raised oxidation potentials for 11a-c reflect the reduced stability of the twisted dication structure within the steric constraints of the smaller cyclophanes. Consistent with this, the value of delta E (defined as Eoxpa - Eoxpc) decreases (i.e., reversibility of the oxidation process increases) in the sequence 11d > 11c > 11a > 11b as the bridging chain becomes shorter. X-ray crystal structures are reported for compounds 11a-d and the dication salt 11d2+(I3-)2.(CH2Cl2)2.25. For 11a-d the typical saddle-shaped conformation of the 9,10-bis(1,3-dithiol-2-ylidene)-9,10-dihydroanthracene moiety is observed, with the strain imposed by the cyclophane ring being accommodated in the structure of the bridging unit. In the dication 11d2+ both dithiolium rings are planar and the anthracene unit is essentially aromatic, with the conformation of the bridge basically the same as in neutral 11d.     

Molecular structure and electrochemical properties of the Pt complex of 1,1′-bis(methylthio)ferrocene and the Pd complexes of 1,4,7-trithia[7]- and 1,5,9-trithia[9] (1,1′)ferrocenophanes

Molecular structures of (triphenylphosphine) [1,1′-bis-(methylthio)ferrocene-S,S′,Fe]Pt(BF₄)₂ (1), (1,5,9-trithia[9]ferrocenophane-S,S′,S″,Fe)Pd(BF₄)₂ (2), and (acetonitrile)(1,4,7-trithia[7]ferrocenophane-S,S′,S″,Fe)Pd(BF₄)₂ (3) were determined by X-ray analyses. The Pt in 1 and the Pd atom in 2 have a somewhat distorted square-planar geometry including the Fe atom of the ferrocene moiety, while the Pd atom in 3 is coordinated by one equivalent of acetonitrile and takes a distorted tetragonal-pyramidal geometry. The distances of the Fe---M bond (M = Pd, Pt) in 1–3 are 2.851(2), 2.827(2), and 3.0962(8) Å, respectively. Cyclic voltammetry of 1–3 gave no reversible wave, but afforded some information supporting the presence of a dative bond.     

Hydrothermal synthesis and crystal structure of Cs6[(UO2)4(W5O21)(OH)2(H2O)2]: a new polar uranyl tungstate

The hydrothermal reaction of UO₃, WO₃, and CsIO₄ leads to the formation of Cs₆[(UO₂)₄(W₅O₂₁)(OH)₂(H₂O)₂] and UO₂(IO₃)₂(H₂O). Cs₆[(UO₂)₄(W₅O₂₁)(OH)₂(H₂O)₂] is the first example of a hydrothermally synthesized uranyl tungstate. It's structure has been determined by single-crystal X-ray diffraction. Crystallographic data: tetragonal, space group I4 cm, , , Z=4, MoKα, , R(F)=2.84% for 135 parameters with 2300 reflections with I>2σ(I). The structure is comprised of two-dimensional anionic layers that are separated by Cs⁺ cations. The coordination polyhedra found in the novel layers consist of UO₇ pentagonal bipyramids, WO₆ distorted octahedra, and WO₅ square pyramids. The UO₇ polyhedra are formed from the binding of five equatorial oxygen atoms around a central uranyl, UO₂²⁺, unit. Both bridging and terminal oxo ligands are employed in forming the WO₅ square pyramidal units, while oxo, hydroxo, and aqua ligands are found in the WO₆ distorted octahedra. In the layers, four (UO₂)O₅ polyhedra corner share with equatorial oxygen atoms to form a U₄O₂₄ tetramer entity with a square site in the center; a tungsten atom populates the center of each of these sites to form a U₄WO₂₅ pentamer unit. The pentamer units that result are connected in two dimensions by edge-shared dimers of WO₆ octahedra to form the two-dimensional [(UO₂)₄(W₅O₂₁)(OH)₂(H₂O)₂]^6- layers. The lack of inversion symmetry in Cs₆[(UO₂)₄(W₅O₂₁)(OH)₂(H₂O)₂] can be directly contributed to the WO₅ square pyramids found in the pentamer units. In the structure, all of these polar polyhedra align their terminal oxygens in the same orientation, along the c axis, thus resulting in a polar compound.     

A new structure type of phosphate: Crystal structure of Na2Zn5(PO4)4

A new compound, Na₂Zn₅(PO₄)₄, was identified in the system ZnONa₂OP₂O₅ and high-quality crystal was obtained by the melt method. The crystal structure of this compound was solved by direct method from single crystal X-ray diffraction data. The structure was then refined anisotropically using a full-matrix least square refinement on F² and the refinement converged to R₁=0.0233 and wR₂=0.0544. This compound crystallizes in the orthorhombic system with space group Pbcn, lattice parameters a=10.381(2) Å, b=8.507(1) Å, c=16.568(3) Å and Z=4. The structure is made up of 3D [Zn₅P₄O₁₆]_n²ⁿ⁻ covalent framework consisting of [Zn₄P₄O₁₆]_n⁴ⁿ⁻ layers. The powder diffraction pattern of Na₉Zn₂₁(PO₄)₁₇ is explained by simulating a theoretical pattern with NaZnPO₄ and Na₂Zn₅(PO₄)₄ in the molar ratio of 1:4 and then by Rietveld refinement of experimental pattern. Na₂Zn₅(PO₄)₄ melts congruently at 855 °C and its conductivity is 5.63×10⁻⁹ S/cm.     

Synthesis, structure and dynamic stereochemistry of (O → Si)-chelate N-(trifluorosilylmethyl)-[N-(S)-(1-phenylethyl)]acetamide and 1-(trifluorosilylmethyl)-2-oxoperhydroazepine: Retention of the O → Si coordination in the adduct with KF and 18-crown-6

The novel compounds, N-(trifluorosilylmethyl)-[N-(S)-(1-phenylethyl)]-acetamide (1a) and 1-(trifluorosilylmethyl)-2-oxoperhydroazepine (1b) have been prepared from the corresponding NH-compounds using ClCH₂SiCl₃/Et₃N or ClCH₂SiCl₃/(Me₃Si)₂NH followed by methanolysis or hydrolysis of the reaction mixture in the presence of Lewis bases, and then BF₃ etherate. Potassium-(18-crown-6)-(2-oxoperhydroazepinomethyl)tetrafluorosilicate (2) was synthesized by reaction of the trifluoride (1b) with KF in the presence of 18-crown-6. Using ¹⁹F, ²⁹Si NMR and X-ray diffraction techniques it was established that the silicon atom is pentacoordinate in the trifluorides (1a, b) and hexacoordinate in the adduct 2. Thus the internal coordination of the O → Si bond present in the trifluoride (1b) is retained in the adduct 2.The stereochemical non-rigidity of the trifluorides (1a, b) and the N-(trifluorosilylmethyl)-N-methylacetamide (1c) was investigated using dynamic ¹⁹F NMR spectroscopy. The activation barriers for permutational isomerization are in the range 9.5-10 kcal mol⁻¹. Lower values of ΔG^# for permutation of trifluorides (1a-c) compared to the monofluorides with the coordination core OSiC₃F together with small negative values for the activation entropy implies a non-dissociative mechanism. Quantum-chemical analysis suggests a mechanism involving a turnstile rotation.     

New mixed-halide, boron-centered zirconium cluster phases with different cation distributions within a cluster framework: syntheses and structures of A[(Zr6B)ClxI14−x] (A=Na or Cs, 0x4)

Two new mixed-halide zirconium cluster phases have been synthesized by solid-state reactions in sealed tantalum containers from the Zr(IV) halides, elemental Zr and B, and NaI or CsCl, respectively. Single-crystal X-ray data were used to determine the crystal structures of Na[(Zr₆B)Cl_3.9I_10.1], and Cs[(Zr₆B)Cl_2.2I_11.8]. Both phases crystallize in a stuffed version of the [Nb₆Cl₁₄] structure type, orthorhombic, space group Cmca (Na[(Zr₆B)Cl_3.87(5)I_10.13]: a=15.787(2) Å, b=14.109(2) Å, c=12.505(2) Å, Z=4, R1(F)=0.0322 and wR2(F²)=0.0842; Cs[(Zr₆B)Cl_2.16(5)I_11.84]: a=15.696(4) Å, b=14.156(4) Å, c=12.811(4) Å, Z=4, R1(F)=0.0404 and wR2(F²)=0.1031). This structure type is constructed of clusters which contain centered (Zr₆Z) octahedra of the type [(Zr₆Z)X₁₂ⁱX₆^a] with Z=B and X=Cl and/or I. In both structures, chlorine and iodine atoms are randomly (to X-rays) distributed on the inner non-cluster-interconnecting ligand positions, whereas those sites which bridge metal octahedra are solely occupied by iodine. The phase widths for both phases have been found to cover 0x4 for A^I[(Zr₆B)Cl_xI_14−x]. Whereas the sodium cations in Na[(Zr₆B)Cl_xI_14−x] occupy 25% of a site which is octahedrally surrounded by halogen atoms, the larger cations in the cesium-containing phase occupy a 12-coordinate site within the cluster network.     

Synthesis and characterization of thermally stable poly(ether-azomethine)s derived from 1,1-bis[4-(4-benzaldehyde oxy)-3-methyl phenyl] cyclopentane

A new dialdehyde 1,1-bis[4-(4-benzaldehyde oxy)-3-methyl phenyl] cyclopentane (BBMPC) was synthesized starting from cyclopentanone and O-cresol to give 1,1-bis(4-hydroxy-3-methyl phenyl)cyclopentane (BHMPC); followed by reaction with 4-fluorobenzaldehyde in N, N-dimethyl formamide (DMF), containing anhydrous potassium carbonate. New series of poly(ether-azomethine)s were synthesized from (BBMPC) with different diamines such as 4,4′- diamino diphenyl ether (ODA); 4,4′-diaminodiphenyl methane (MDA); 4-aminophenyl sulfone (SDA); p-phenylene diamines (p-PDA), etc. in N, N’- dimethyl acetamide (DMAc) with 5 wt% LiCl by the solution polycondensation method. Inherent viscosities of these polymers were in the range 0.20 to 0.38 dL/g indicating formation of moderate molecular weights. These polymers exhibited good solubility in various polar aprotic solvents such as N-methyl-2-pyrrolidone (NMP), DMAc, DMF, etc. However some polymers showed partial solubility in DMF and DMAc. X-Ray diffraction pattern of polymers showed amorphous nature. Thermal stability was assessed by 10% weight loss temperature and the degradation temperature of the resultant polymers falls in the ranges from 444-501°C in nitrogen. The glass transition temperature was in the range of 155-205°C. The structure-property correlation among these polyazomethines were studied; in view of their potential applications as high performance polymers.     

Synthesis, crystal structure and magnetic property of a new 1D molecular material [1-(4′-chlorobenzyl)-4-aminopyridinium](+) bis(maleonitriledithiolato)nickel(-)

A new ion-pair complex, [1-(4′-chlorobenzyl)-4-aminopyridinium](+)bis(maleonitrile-dithiolato)nickel(−),[ClbzPyNH₂][Ni(mnt)₂] (1), has been prepared and characterized. X-ray single crystal structure conforms that the Ni(mnt)₂⁻ anions and [ClbzPyNH₂]⁺ cations of 1 form completely segregated uniform stacking columns with the Ni?Ni distance 3.944 Å in the Ni(mnt)₂⁻ stacking column. The temperature dependence of the magnetic susceptibility reveals that 1 undergoes a magnetic transition, and exhibits ferromagnetic interaction in the high-temperature phase and spin gap system in the low-temperature phase.