The Crystal Structure of Sr2TiSi2O8

Sr₂TiSi₂O₈ single crystals were grown by Czochralski pulling and from a high-temperature solution. X-ray diffractometry revealed the modulated crystal structure of Sr₂TiSi₂O₈ to belong to the 5D superspace group P4bm (−α, α, 1/2; α, α, 1/2) with α=0.3. Atomic positions, anisotropic displacement factors and positional modulation parameters for Sr₂TiSi₂O₈ are determined and discussed. The positional modulation is further investigated by electron diffraction and high-resolution transmission electron microscopy. In the latter experiments, the 2D modulation appears to be superimposed by some 1D modulation waves. This effect is discussed in terms of growth conditions.     

Revisiting Y2Si2O7 and Y2SiO5 polymorphic structures by Y MAS-NMR spectroscopy

This paper describes the ⁸⁹Y MAS-NMR spectra for all the established polymorphs of Y₂Si₂O₇ (y, α, β, γ and δ) and Y₂SiO₅ (X1 and X2). The combination of our spectroscopic data with the structural information published up to now from diffraction data permits the revision and correction of mistakes which appear in the literature. Finally, the influence of different structural factors, such as yttrium coordination number and Y-O distances on the ⁸⁹Y NMR isotropic chemical shift is analyzed.     

New one-dimensional uranyl and neptunyl iodates: crystal structures of K3[(UO2)2(IO3)6](IO3)·H2O and K[NpO2(IO3)3]·1.5H2O

The uranyl and neptunyl(VI) iodates, K₃[(UO₂)₂(IO₃)₆](IO₃)·H₂O (1) and K[NpO₂(IO₃)₃]·1.5H₂O (2), have been prepared and crystallized under mild hydrothermal conditions. The structures of 1 and 2 both contain one-dimensional _∞¹[AnO₂(IO₃)₃]¹⁻(An=U,Np) ribbons that consist of approximately linear actinyl(VI) cations bound by iodate anions to yield AnO₇ pentagonal bipyramids. The AnO₇ units are linked by bridging iodate anions to yield chains that are in turn coupled by additional iodate anions to yield ribbons. The edges of the ribbons are terminated by monodentate iodate anions. For 1 and 2, K⁺ cations and water molecules separate the ribbons from one another. In addition, isolated iodate anions are also found between _∞¹[UO₂(IO₃)₃]¹⁻ ribbons in 1. In order to aid in the assignment of oxidation states in neptunyl containing compounds, a bond-valence sum parameter of 2.018 Å for Np(VI) bound exclusively to oxygen has been developed with b=0.37 Å. Crystallographic data (193 K, MoKα, λ=0.71073): 1, triclinic, , a=7.0609(4) Å, b=14.5686(8)  Å, c=14.7047(8)  Å, α=119.547(1)°, β=95.256(1)°, γ=93.206(1)°, Z=2, R(F)=2.49% for 353 parameters with 6414 reflections with I>2σ(I); (203 K, MoKα, λ=0.71073): 2, monoclinic, P2₁/c, a=7.796(4)  Å, b=7.151(3)  Å, c=21.79(1)  Å, β=97.399(7)°, Z=4, R(F)=6.33% for 183 parameters with 2451 reflections with I>2σ(I).     

Magnetic properties of Mn2V2O7 single crystals

Magnetic properties of Mn₂V₂O₇ single crystals are investigated by means of magnetic susceptibility, magnetization, and heat capacity measurements. A structural phase transition of the α-β forms is clearly observed at the temperature range of 200-250 K and an antiferromagnetic ordering with magnetic anisotropy is observed below 20 K. A spin-flop transition is observed with magnetic field applied along the [110] axis of β-Mn₂V₂O₇, of which corresponds to the [001] axis of α-Mn₂V₂O₇, suggesting that the spins of Mn²⁺ ions locate within honeycomb layers which point likely in the [110] direction of β-Mn₂V₂O₇ or the [001] axis of α-Mn₂V₂O₇. However, a rather small jump of magnetization at spin-flop transition suggests a possible partition of crystal to some domains through β-to-α transition on cooling or much complex spin structure in honeycomb lattice with some frustration.     

p-Type thermoelectric properties of the oxygen-deficient perovskite Ca2Fe2O5 in the brownmillerite structure

Brownmillerite calcium ferrite was synthesized in air at 1573 K and thermoelectric properties (direct current electrical conductivity σ, Seebeck coefficient α, thermal conductivity κ, thermal expansion α_L) were measured from 373 to 1050 K in air. Seebeck coefficient was positive over all temperatures indicating conduction by holes, and electrical properties were continuous through the Pnma-Imma phase transition. Based on the thermopower and conductivity activation energies as well as estimated mobility, polaron hopping conduction was found to dominate charge transport. The low electrical conductivity, <1 S/cm, limits the power factor (α²σ), and thus the figure of merit for thermoelectric applications. The thermal conductivity values of ∼2 W/mK and their similarity to Ruddlesden-Popper phase implies the potential of the alternating tetrahedral and octahedral layers to limit phonon propagation through brownmillerite structures. Bulk linear coefficient of thermal expansion (∼14×10⁻⁶ K⁻¹) was calculated from volume data based on high-temperature in situ X-ray powder diffraction, and shows the greatest expansion perpendicular to the alternating layers.     

Synthesis and characterization of two-dimensional fluorinated metal phosphates incorporating 2,2′-bipyridine ligands: M2F2(2,2′-bpy)(HPO4)2(H2O) (M=Fe, Ga)

Two fluorinated metal phosphates, M₂F₂(2,2′-bpy)(HPO₄)₂(H₂O) (M=Fe, Ga), have been synthesized under hydrothermal conditions and characterized by single-crystal X-ray diffraction, thermogravimetric analysis, and magnetic susceptibility. The two compounds are isostructural and crystallize in the triclinic space group , a=7.6595(8)Å, b=10.101(1)Å, c=11.260(1)Å, α=107.555(2)°, β=105.174(2)°, γ=98.975(2)°, V=775.1(2)ų and Z=2 for the Fe compound, and a=7.5816(6)Å, b=9.9943(7)Å, c=11.1742(8)Å, α=107.333(1)°, β=105.014(1)°, γ=99.261(1)° and V=754.2(2)ų for the Ga compound. They are the first fluorinated metal phosphates which incorporate 2,2′-bipyridine ligands. The structure consists of edge-sharing octahedral dimers with the composition Fe₂F₄(H₂O)₂O₄ and discrete FeN₂O₄ octahedra, which are linked into two-dimensional sheets through corner-sharing phosphate tetrahedra. The 2,2′-bpy ligands bind in a bidentate fashion to the metal atoms and project into interlamellar region. The layers are extended into a three-dimensional supramolecular array via π-π stacking interactions of the 2,2′-bpy ligands. Magnetic susceptibility of the iron compound confirms the presence of Fe^III.     

Syntheses, structures, and properties of Ag4(Mo2O5)(SeO4)2(SeO3) and Ag2(MoO3)3SeO3

Ag₄(Mo₂O₅)(SeO₄)₂(SeO₃) has been synthesized by reacting AgNO₃, MoO₃, and selenic acid under mild hydrothermal conditions. The structure of this compound consists of cis-MoO₂²⁺ molybdenyl units that are bridged to neighboring molybdenyl moieties by selenate anions and by a bridging oxo anion. These dimeric units are joined by selenite anions to yield zigzag one-dimensional chains that extended down the c-axis. Individual chains are polar with the C₂ distortion of the Mo(VI) octahedra aligning on one side of each chain. However, the overall structure is centrosymmetric because neighboring chains have opposite alignment of the C₂ distortion. Upon heating Ag₄(Mo₂O₅)(SeO₄)₂(SeO₃) looses SeO₂ in two distinct steps to yield Ag₂MoO₄. Crystallographic data: (193 K; MoKα, λ=0.71073 Å): orthorhombic, space group Pbcm, a=5.6557(3), b=15.8904(7), c=15.7938(7) Å, V=1419.41(12), Z=4, R(F)=2.72% for 121 parameters with 1829 reflections with I>2σ(I). Ag₂(MoO₃)₃SeO₃ was synthesized by reacting AgNO₃ with MoO₃, SeO₂, and HF under hydrothermal conditions. The structure of Ag₂(MoO₃)₃SeO₃ consists of three crystallographically unique Mo(VI) centers that are in 2+2+2 coordination environments with two long, two intermediate, and two short bonds. These MoO₆ units are connected to form a molybdenyl ribbon that extends along the c-axis. These ribbons are further connected together through tridentate selenite anions to form two-dimensional layers in the [bc] plane. Crystallographic data: (193 K; MoKα, λ=0.71073 Å): monoclinic, space group P2₁/n, a=7.7034(5), b=11.1485(8), c=12.7500(9) Å, β=105.018(1) V=1002.7(2), Z=4, R(F)=3.45% for 164 parameters with 2454 reflections with I>2σ(I). Ag₂(MoO₃)₃SeO₃ decomposes to Ag₂Mo₃O₁₀ on heating above 550 °C.     

Hydrothermal Synthesis and Spectroscopic and Magnetic Behavior of the Mn7(HOXO3)4(XO4)2(X=As, P) Compounds. Crystal Structure of Mn7(HOAsO3)4(AsO4)2

The Mn₇(HOXO₃)₄(XO₄)₂ (X=As, P) compounds have been synthesized by using hydrothermal conditions. The arsenate phase was obtained under autogeneous pressure at 170°C. However, more drastic conditions at both pressure and temperature were necessary in the attainment of the phosphate compound. The crystal structure of Mn₇(HOAsO₃)₄(AsO₄)₂ was solved using single-crystal data. The unit-cell parameters are a=6.810(3) Å, b=8.239(2) Å, c=10.011(4) Å, α=104.31(2)°, β=108.94(3)°, γ=101.25(2)°. Triclinic, P-1 with Z=1. The isostructural Mn₇(HOPO₃)₄(PO₄)₂ phase was characterized from X-ray powder diffraction techniques. The crystal structure of both compounds consists of zig-zag chains constructed by dimeric edge-sharing Mn₂O₁₀ octahedra linked through the MnO₅ trigonal bipyramids. The three-dimensional framework is completed by the connection between isolated MnO₆ entities to the dimers octahedra and trigonal bipyramids. The existence of hydrogenarsenate and hydrogenphosphate anions has been confirmed by IR and Raman spectroscopies. Magnetic measurements indicate the existence of antiferromagnetic interactions in both compounds, which are slightly stronger in the arsenate phase.     

Synthesis and structure of [C6H14N2][(UO2)4(HPO4)2(PO4)2(H2O)]·H2O: An expanded open-framework amine-bearing uranyl phosphate

A new open-framework compound, [C₆H₁₄N₂][(UO₂)₄(HPO₄)₂(PO₄)₂(H₂O)]·H₂O, (DUP-1) has been synthesized under mild hydrothermal conditions. The resulting structure consists of diprotonated DABCOH₂²⁺ (C₆H₁₄N₂²⁺) cations and occluded water molecules occupying the channels of a complex uranyl phosphate three-dimensional framework. The anionic lattice contains uranophane-like sheets connected by hydrated pentagonal bipyramidal UO₇ units. [C₆H₁₄N₂][(UO₂)₄(HPO₄)₂(PO₄)₂(H₂O)]·H₂O possesses five crystallographically unique U centers. U(VI) is present here in both six- and seven-coordinate environments. The DABCOH₂²⁺ cations are held within the channels by hydrogen bonds to both two uranyl oxygen atoms and a μ₂-O atom. Crystallographic data (193 K, Mo Kα, λ=0.71073 Å): DUP-1, monoclinic, P2₁/n, a=7.017(1) Å, b=21.966(4) Å, c=17.619(3) Å, β=90.198(3)°, Z=4, R(F)=4.76% for 382 parameters with 6615 reflections with I>2σ(I).     

Synthesis and structural investigation of the compounds containing HF2 anions: Ca(HF2)2, Ba4F4(HF2)(PF6)3 and Pb2F2(HF2)(PF6)

Three new compounds Ca(HF₂)₂, Ba₄F₄(HF₂)(PF₆)₃ and Pb₂F₂(HF₂)(PF₆) were obtained in the system metal(II) fluoride and anhydrous HF (aHF) acidified with excessive PF₅. The obtained polymeric solids are slightly soluble in aHF and they crystallize out of their aHF solutions. Ca(HF₂)₂ was prepared by simply dissolving CaF₂ in a neutral aHF. It represents the second known compound with homoleptic HF environment of the central atom besides Ba(H₃F₄)₂. The compounds Ba₄F₄(HF₂)(PF₆)₃ and Pb₂F₂(HF₂)(PF₆) represent two additional examples of the formation of a polymeric zigzag ladder or ribbon composed of metal cation and fluoride anion (MF⁺)_n besides PbF(AsF₆), the first isolated compound with such zigzag ladder. The obtained new compounds were characterized by X-ray single crystal diffraction method and partly by Raman spectroscopy. Ba₄F₄(HF₂)(PF₆)₃ crystallizes in a triclinic space group P1¯ with a=4.5870(2) Å, b=8.8327(3) Å, c=11.2489(3) Å, α=67.758(9)°, β=84.722(12), γ=78.283(12)°, V=413.00(3) Å³ at 200 K, Z=1 and R=0.0588. Pb₂F₂(HF₂)(PF₆) at 200 K: space group P1¯, a=4.5722(19) Å, b=4.763(2) Å, c=8.818(4) Å, α=86.967(10)°, β=76.774(10)°, γ=83.230(12)°, V=185.55(14) ų, Z=1 and R=0.0937. Pb₂F₂(HF₂)(PF₆) at 293 K: space group P1¯, a=4.586(2) Å, b=4.781(3) Å, c=8.831(5) Å, α=87.106(13)°, β=76.830(13)°, γ=83.531(11)°, V=187.27(18) Å³, Z=1 and R=0.072. Ca(HF₂)₂ crystallizes in an orthorhombic Fddd space group with a=5.5709(6) Å, b=10.1111(9) Å, c=10.5945(10) Å, V=596.77(10) Å³ at 200 K, Z=8 and R=0.028.     

Synthesis, structure, and characterization of hybrid materials: [Ce(H2O)]2[O2C(CH2)2CO2]3 and [Sm(H2O)]2[O2C(CH2)2CO2]3·H2O

The rare-earth dicarboxylate hybrid materials [Ce(H₂O)]₂[O₂C(CH₂)₂CO₂]₃ ([Ce(Suc)]) and [Sm(H₂O)]₂[O₂C(CH₂)₂CO₂]₃·H₂O ([Sm(Suc)]) have been hydrothermally synthesized (200°C, 3 days) under autogenus pressure. [Ce(Suc)] is triclinic, a=7.961 (3) Å, b=8.176 (5) Å, c=14.32 (2) Å, α=97.07° (7), β=96.75° (8), γ=103.73° (6), and z=2. The crystal structure of this compound has been determined using 3120 unique single crystal data. The final refinements let the agreement factors R₁ and wR₂(F²) converge to 0.0138 and 0.0363, respectively. [Ce(Suc)] is built up from infinite chains of edge-sharing nine-fold coordinated cerium atoms running along [100]. These chains are interconnected by the carbon atoms of the succinate anions, leading to a three-dimensional hybrid framework. The cell constants of [Sm(Suc)], isotypic with monoclinic C2/c [Pr(H₂O)]₂[O₂C(CH₂)₂CO₂]₃·H₂O ([Pr(Suc)]), were refined starting from X-ray powder data: a=20.275 (3) Å, b=7.919 (6) Å, c=14.130 (3) Å, and β=121.45° (1). Despite its lower symmetry, [Ce(Suc)] presents an important structural filiation with [Sm(Suc)]     

Controlled synthesis of bismuth oxo nanoscale crystals (BiOCl, Bi12O17Cl2, α-Bi2O3, and (BiO)2CO3) by solution-phase methods

We present the controlled solution-phase synthesis of several sheet- or rod-like bismuth oxides, BiOCl, Bi₁₂O₁₇Cl₂, α-Bi₂O₃ and (BiO)₂CO₃, by adjusting growth parameters such as reaction temperature, mole ratios of reactants, and the base used. BiOCl, Bi₁₂O₁₇Cl₂, and α-Bi₂O₃ could be prepared from BiCl₃ and NaOH, whereas (BiO)₂CO₃ was prepared from BiCl₃ and urea. BiOCl and Bi₁₂O₁₇Cl₂ could also be prepared from BiCl₃ and ammonia. The α-Bi₂O₃ sample exhibited strong emission at room temperature.     

Inorganic-organic hybrid materials: synthesis and crystal structure determination from powder diffraction data of Pb2(O3PCH2C6H4CH2PO3)

A new lead diphosphonate, Pb₂(O₃PCH₂C₆H₄CH₂PO₃) was hydrothermally synthesized from tetraethyl α,α′-p-xylenediphos-phonate and Pb(NO₃)₂. The structure was solved and refined using X-ray powder diffraction data. It crystallizes in the monoclinic space group P2₁/c, with a = 467.84(2), b = 2007.98(9), c = 639.10(2) pm, β = 101.020(3)°, V = 589.31(4) 10⁶ pm, Z=2, wR_p=0.034, R_p=0.027, R_F2=0.061, R_F=0.036. The structure is built from corner-linked [PbO₄] polyhedra, containing a lone pair of electrons. These polyhedra are connected to layers by phosphonate groups, RPO₃²⁻ and through the organic diphosphonic acid to a three-dimensional structure. Thermogravimetric as well as IR spectroscopic studies are also presented.     

Oxysulfure de scandium Sc2O2S

Sc₂O₂S is hexagonal, $\text{P6}{}_3\text{mmc}\text{, a = 3.5196(4)}$ Å, c = 12.519(2) Å, Z = 2, Dc = 3.807 g cm^?3, Dm = 4.014 g cm^?3, μ(MoKα) = 55.51 cm^?1. The final R value is 0.038 for 205 symmetry-independent reflections. This scandium oxysulfide has c = 12.52 Å, twice the value found in rare earth oxysulfides. An La₂O₂S cell combined with its reflection in a (001) mirror gives the Sc₂O₂S cell.     

Crystal chemistry of Co-doped Zn7Sb2O12

Zn₇Sb₂O₁₂ forms a full range of Co-containing α solid solutions, Zn_7−xCo_xSb₂O₁₂, with an inverse-spinel structure at high temperature. At low temperatures for x<2, the solid solutions transform into the low temperature β-polymorph. For x=0, the β→α transition occurs at 1225±25 °C; the transition temperature decreases with increasing x. At high x and low temperatures, α solid solutions are formed but are non-stoichiometric; the (Zn+Co):Sb ratio is >7:2 and the compensation for the deficiency in Sb is attributed to the partial oxidation of Co²⁺ to Co³⁺. From Rietveld refinements using ND data, Co occupies both octahedral and tetrahedral sites at intermediate values of x, but an octahedral preference attributed to crystal field stabilisation, causes the lattice parameter plot to deviate negatively from the Vegard's law. Sub-solidus compatibility relations in the ternary system ZnO-Sb₂O₅-CoO have been determined at 1100 °C for the compositions containing ?50% Sb₂O₅.     

New Molybdenyl Iodates: Hydrothermal Preparation and Structures of Molecular K2MoO2(IO3)4 and Two-Dimensional β-KMoO3(IO3)

Two new molybdenyl iodates, K₂MoO₂(IO₃)₄ (1) and β-KMoO₃(IO₃) (2), have been prepared from the reactions of MoO₃ with KIO₄ and NH₄Cl at 180°C in aqueous media. The structure of 1 consists of molecular [MoO₂(IO₃)₄]²⁻ anions separated by K⁺ cations. The Mo(VI) centers are ligated by two cis-oxo ligands and four monodentate iodate anions. Both terminal and bridging oxygen atoms of the iodate anions form long ionic contacts with the K⁺ cations. β-KMoO₃(IO₃) (2) displays a two-dimensional layered structure constructed from ²_∞[(MoO₃(IO₃)]¹⁻ anionic sheets separated by K⁺ cations. These sheets are built from one-dimensional chains formed from corner-sharing MoO₆ octahedra that run along the b-axis that are linked together through bridging iodate groups. K⁺ cations separate the layers from one another and form long contacts with oxygen atoms from both the iodate anions and molybdenyl moieties. Crystallographic data: 1, monoclinic, space group C2/c, a=12.8973(9) Å, b=6.0587(4) Å, c=17.694(1) Å, β=102.451(1)°, Z=4, MoKα, λ=0.71073, R(F)=2.64% for 97 parameters with 1584 reflections with I>2σ(I); 2, monoclinic, space group P2₁/n, a=7.4999(6) Å, b=7.4737(6) Å, c=10.5269(8) Å, β=109.023(1)°, Z=4, MoKα, λ=0.71073, R(F)=2.73% for 83 parameters with 1334 reflections with I>2σ(I).     

Cu2Sc2Ge4O13, a novel germanate isotypic with the quasi-1D compound Cu2Fe2Ge4O13 between 100 and 298 K

The germanate compound Cu₂Sc₂Ge₄O₁₃ has been synthesized by solid-state ceramic sintering techniques between 1173 and 1423 K. The structure was solved from single-crystal data by Patterson methods. The title compound is monoclinic, a=12.336(2) Å, b=8.7034(9) Å, c=4.8883(8) Å, β=95.74(2), space group P2₁/m, Z=4. The compound is isotypic with Cu₂Fe₂Ge₄O₁₃, described very recently. The structure consists of crankshaft-like chains of edge-sharing ScO₆ octahedra running parallel to the crystallographic b-axis. These chains are linked laterally by [Cu₂O₆]⁸⁻ dimers forming a sheet of metal-oxygen-polyhedra within the a-b plane. These sheets are separated along the c-axis by [Ge₄O₁₃]¹⁰⁻ units. Cooling to 100 K does not alter the crystallographic symmetry of Cu₂Sc₂Ge₄O₁₃. While the b, c lattice parameter and the unit cell volume show a positive linear thermal expansion (α=6.4(2)×10⁻⁶, 5.0(2)×10⁻⁶ and 8.3(2)×10⁻⁶ K⁻¹ respectively), the a lattice parameter exhibits a negative thermal expansion (α=−3.0(2)×10⁻⁶ K⁻¹) for the complete T-range investigated. This negative thermal expansion of a is mainly due to the increase of the Cu-Cu interatomic distance, which is along the a-axis. Average bond lengths remain almost constant between 100 and 298 K, whereas individual ones partly show both significant shortages and lengthening.     

Preparation and characterization of shuttle-like α-Fe2O3 nanoparticles by supermolecular template

Shuttle-like α-Fe₂O₃ nanoparticles have been successfully synthesized via a new soft-template route using polyethylene glycol (PEG) as polymer, cetyltrimethylammonium bromide (CTAB) as surfactant and FeCl₃·6H₂O as iron source materials. Meanwhile, spherical α-Fe₂O₃ nanoparticles are also fabricated under the similar conditions without surfactant and polymer. The resultant products are characterized by means of thermalgravimetric analysis (TGA), powder X-ray diffraction (XRD), infrared (IR) spectroscopy, transmission electron micrograph (TEM), X-ray photoelectron spectra (XPS) and magnetization measurements. The homogeneous α-Fe₂O₃ nanoparticles with shuttle-like shape have an average length of 120 nm and a mean diameter of about 50 nm in the middle part (an average aspect ratio of about 2.5) whereas spherical α-Fe₂O₃ nanoparticles have a mean particle diameter of about 35 nm. Magnetic hysteresis measurements reveal that shuttle-like α-Fe₂O₃ nanoparticles display normal ferromagnetic behaviors while spherical α-Fe₂O₃ nanoparticles exhibit weak ferromagnetic behaviors at room temperature. The two types of α-Fe₂O₃ exhibit hysteretic features with the remanence and coercivity of 0.156 emu/g and 664 Oe, 0.048 emu/g and 110 Oe, respectively. The higher remanent magnetization and coercivity of shuttle-like α-Fe₂O₃ nanoparticles may be associated with the aspect ratio of α-Fe₂O₃ since shape anisotropy would exert a tremendous influence on their magnetic properties.