Synthesis of polydopamine‐coated graphene–polymer nanocomposites via RAFT polymerization

Graphene‐polymer nanocomposites have significant potential in many applications such as photovoltaic devices, fuel cells, and sensors. Functionalization of graphene is an essential step in the synthesis of uniformly distributed graphene‐polymer nanocomposites, but often results in structural defects in the graphitic sp² carbon framework. To address this issue, we synthesized graphene oxide (GO) by oxidative exfoliation of graphite and then reduced it into graphene via self‐polymerization of dopamine (DA). The simultaneous reduction of GO into graphene, and polymerization and coating of polydopamine (PDA) on the reduced graphene oxide (RGO) surface were confirmed with XRD, UV–Vis, XPS, Raman, TGA, and FTIR. The degree of reduction of GO increased with increasing DA/GO ratio from 1/4 to 4/1 and/or with increasing temperature from room temperature to 60 °C. A RAFT agent, 2‐(dodecylthiocarbonothioylthio)?2‐methylpropionic acid, was linked onto the surface of the PDA/RGO, with a higher equivalence of RAFT agent in the reaction leading to a higher concentration of RAFT sites on the surface. Graphene‐poly(methyl methacrylate), graphene‐poly(tert‐butyl acrylate), and graphene‐poly(N‐isopropylacrylamide) nanocomposites were synthesized via RAFT polymerization, showing their characteristic solubility in several different solvents. This novel synthetic route was found facile and can be readily used for the rational design of graphene‐polymer nanocomposites, promoting their applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3941–3949     

Functional Graphene by Thiol‐ene Click Chemistry

Thiol‐ene click reaction was successfully employed for chemical modification of graphene oxide (GO) by one‐step synthesis. Herein, 2,2‐azobis(2‐methylpropionitrile) (AIBN) was used as thermal catalyst and cysteamine hydrochloride (HS?(CH₂)₂?NH₂HCl) was used as thiol‐containing compound, which is incorporated to GO surface upon reaction with the C=C bonds. The hydrochloride acts as protecting group for the amine, which is finally eliminated by adding sodium hydroxide. The modified GO contains both S‐ and N‐containing groups (NS‐GO). We found that NS‐GO sheets form good dispersion in water, ethanol, and ethylene glycol. These graphene dispersions can be processed into functionalized graphene film. Besides, it was demonstrated that NS‐GO was proved to be an excellent host matrix for platinum nanoparticles. The developed method paves a new way for graphene modification and its functional nanocomposites.     

Preparation of Polyethylene/Graphene Nanocomposites with Octadecylamine‐Modified Graphene Oxide‐MgCl‐Supported Ziegler–Natta Catalyst

In this work, an octadecylamine‐modified graphene oxide (ODA‐GO)‐MgCl‐supported Ziegler–Natta catalyst was synthesized by reacting ODA‐GO with a Grignard reagent, followed by anchoring TiCl₄ to the structure. The effect of the ODA‐GO on the catalyst morphology and ethylene polymerization behavior was examined. The resultant polyethylene (PE)/ODA‐GO nanocomposites directly mirrored the catalyst morphology by forming a layered morphology, and the ODA‐GO fillers were well dispersed in the PE matrix and showed strong interfacial adhesion with it. The resultant PE/ODA‐GO nanocomposites exhibited better thermal stability and mechanical properties than neat PE, even with a small amount of ODA‐GO added. Thus, this work provides a facile approach to the production of high‐performance PE. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 855–860     

Tailored Synthesis of Octopus‐type Janus Nanoparticles for Synergistic Actively‐Targeted and Chemo‐Photothermal Therapy

A facile, reproducible, and scalable method was explored to construct uniform Au@poly(acrylic acid) (PAA) Janus nanoparticles (JNPs). The as‐prepared JNPs were used as templates to preferentially grow a mesoporous silica (mSiO₂) shell and Au branches separately modified with methoxy‐poly(ethylene glycol)‐thiol (PEG) to improve their stability, and lactobionic acid (LA) for tumor‐specific targeting. The obtained octopus‐type PEG‐Au‐PAA/mSiO₂‐LA Janus NPs (PEG‐OJNP‐LA) possess pH and NIR dual‐responsive release properties. Moreover, DOX‐loaded PEG‐OJNP‐LA, upon 808 nm NIR light irradiation, exhibit obviously higher toxicity at the cellular and animal levels compared with chemotherapy or photothermal therapy alone, indicating the PEG‐OJNP‐LA could be utilized as a multifunctional nanoplatform for in vitro and in vivo actively‐targeted and chemo‐photothermal cancer therapy.     

Covalent polymeric modification of graphene nanosheets via surface‐initiated single‐electron‐transfer living radical polymerization

Graphene nanosheets offer intriguing electronic, thermal, and mechanical properties and are expected to find a variety of applications in high‐performance nanocomposite materials. Dispersal of graphene nanosheets in polymer hosts and precise interface control are challenging due to their strong interlayer cohesive energy and surface inertia. Here, an efficient strategy is presented for growing polymers directly from the surface of reduced graphene oxide (GO). This method involves the covalent attachment of Br‐containing initiating groups onto the surface of hydrazine hydrate reduced GO via a diazonium addition and the succeeding linking of poly(tert‐butyl methacrylate) (PtBMA) chains (71.7 wt % grafting efficiency) via surface‐initiated single‐electron‐transfer living radical polymerization (SET‐LRP) to graphene nanosheets. The resulting materials were characterized by using a range of testing techniques and it was proved that polymer chains were successfully introduced to the surface of exfoliated graphene sheets. After grafting with PtBMA, the modified graphene sheets still maintained the separated single layers, and the dispersibility was improved significantly. The method is believed to offer possibilities for optimizing the processing properties and interface structure of graphene–polymer nanocomposites. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

An inorganic route to decorate graphene oxide with nanosilica and investigate its effect on anti‐corrosion property of waterborne epoxy

This paper reported an inorganic route that uses potassium silicate, which is one type of alkali silicate as an inorganic modifier, taking advantage of its instability and water condensation to decorate graphene oxide (GO) with nano‐SiO₂. The ingredients of prepared nanocomposites were characterized by Fourier‐transform infrared spectroscopy (FT‐IR) and X‐ray photoelectron spectroscopy (XPS), and the thermodynamic property was tested by thermal gravimetric analysis (TGA). Scanning electron microscopy (SEM) was used to observe the morphology of SiO₂‐GO nanocomposites. All the analyses above revealed the nano‐SiO₂ (<100 nm) was deposited on the surface of GO by chemical bonds. In the meantime, the dispersion test illustrated that nano‐SiO₂ played an important role in improving the dispersity of GO. The effect of SiO₂‐GO nanocomposites on barrier and corrosion protection performance of SiO₂‐GO nanocomposites was tested by immersion experiment and electrochemical impedance spectroscopy (EIS). The results indicated that GO was helped to block the corrosion of aggressive medium; moreover, SiO₂‐GO nanocomposites had the best anticorrosion performance and the slowest rate of corrosion because of its good dispersity with waterborne epoxy coatings.     

Template‐free Fabrication of Hierarchical Macro‐/mesoporous N‐doped TiO2/graphene Oxide Composites with Enhanced Visible‐light Photocatalytic Activity

Hierarchical macro‐/mesoporous N‐doped TiO₂/graphene oxide (N‐TiO₂/GO) composites were prepared without using templates by the simple dropwise addition mixed solution of tetrabutyl titanate and ethanol containg graphene oxide (GO) to the ammonia solution, and then calcined at 350 °C. The as‐prepared samples were characterized by scanning electron microscopy (SEM), Brunauer‐Emmett‐Teller (BET) surface area, X‐ray diffraction (XRD), Raman spectroscopy, X‐ray photoelectron spectroscopy (XPS), and UV‐Vis absorption spectroscopy. The photocatalytic activity was evaluated by the photocatalytic degradation of methyl orange in an aqueous solution under visible‐light irradiation. The results show that N‐TiO₂/GO composites exhibited enhanced photocatalytic activity. GO content exhibited an obvious influence on photocatalytic performance, and the optimal GO addition content was 1 wt%. The enhanced photocatalytic activity could be attributed to the synergetic effects of three factors including the improved visible light absorption, the hierarchical macro‐mesoporous structure, and the efficient charge separation by GO.     

Nitrogen‐doped graphene‐cerium oxide (NG‐CeO2) photocatalyst for the photodegradation of methylene blue in waste water

This study shows a facile approach for the preparation of CeO₂ nanoparticles decorated with porous nitrogen‐doped graphene (NG) nanosheets for effective photocatalytic degradation of methylene blue (MB). NG nanosheets were first synthesized using a hydrothermal method and then nitrogen‐doped graphene‐cerium oxide (NG‐CeO₂) was prepared through mixing of cerium nitrate with different concentrations of NG under ultrasonication followed by hydrothermal treatment. The synthesized nanocomposites were characterized using X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and field emission scanning electron microscopy (FE‐SEM). The photocatalytic activity of the synthesized nanocomposites was analyzed against MB dye. Results showed that the nanocomposites of NG‐CeO₂ have an average particle size of 20 nm. The as‐prepared NG‐CeO₂ nanocomposites exhibited outstanding photocatalytic activity for dye degradation under visible light irradiation, which could be attributed to synergistic effects between the NG nanosheets and CeO₂. The quantum of photodegradation increases with the increase of the NG content in the nanocomposites.     

Ag@TiO2 Nanoprisms with Highly Efficient Near‐Infrared Photothermal Conversion for Melanoma Therapy

Melanoma is a primary reason of death from skin cancer and associated with high lethality. Photothermal therapy (PTT) has been developed into a powerful cancer treatment technique in recent years. Here, we created a low‐cost and high‐performance PTT agent, Ag@TiO₂ NPs, which possesses a high photothermal conversion efficiency of ≈65 % and strong near‐infrared (NIR) absorption about 808 nm. Ag NPs were synthesized using a two‐step method and coated with TiO₂ to obtain Ag@TiO₂ NPs by a facile sol‐gel method. Because of the oxide, Ag@TiO₂ NPs exhibit remarkable high photothermal conversion efficiencies and biocompatibility in vivo and in vitro. Cytotoxicity and therapeutic efficiency of photothermal cytotoxicity of Ag@TiO₂ NPs were tested in B16‐F10 cells and C57BL/6J mice. Under light irradiation, the elevated temperature causes cell death in Ag NPs‐treated (100 μg mL^?1) cells in vitro (both p<0.01). In the case of subcutaneous melanoma tumor model, Ag@TiO₂ NPs (100 μg mL^?1) were injected into the tumor and irradiated with a 808 nm laser of 2 W cm^?2 for 1 minute. As a consequence, the tumor volume gradually decreased by NIR laser irradiation with only a single treatment. The results demonstrate that Ag@TiO₂ NPs are biocompatible and an attractive photothermal agent for cutaneous melanoma by local delivery.     

Engineered Targeted Hyaluronic Acid–Glutathione‐Stabilized Gold Nanoclusters/Graphene Oxide–5‐Fluorouracil as a Smart Theranostic Platform for Stimulus‐Controlled Fluorescence Imaging‐Assisted Synergetic Chemo/Phototherapy

A theranostic platform with integrated diagnostic and therapeutic functions as well as specific targeted and controlled combination therapy to enhance treatment efficacy is of great importance for a wide range of biomedical applications. Here, we first attempted to develop biocompatible hyaluronic acid (HA)–glutathione (GSH) conjugate stabilized gold nanoclusters (GNCs) combined with graphene oxide (GO), accompanied by loading 5‐fluorouracil (5FU), as a novel theranostic platform (HG‐GNCs/GO‐5FU, HG refers to HA‐GSH). Multifunctional HG‐GNCs possessed excellent fluorescence, photosensitivity and specific targeting ability to the cancer cells while their fluorescence and singlet oxygen generation could be strongly inhibited by GO and then effectively restored by lysosomal hyaluronidase in tumor cells. The sustained and complete release of 5FU from HG‐GNCs/GO could also be stimulated successively by enzymatic degradation of HA and light‐induced heat effect of GO under laser irradiation so that turn‐on cell imaging‐assisted synergistic therapeutic strategies associated with triple enzyme/light‐controlled chemo/photothermal/photodynamic therapy could be achieved at the same time, reducing greatly the side effects of materials to normal cells. Our study presents a novel strategy to combine targeting and bioimaging with triple therapies to enhance the antitumor effect.     

Thermoresponsive graphene oxide‐PNIPAM nanocomposites with controllable grafting polymer chains via moderate in situ SET–LRP

In this study, we report a mild and efficient strategy for growing thermosensitive polymers directly from the surface of exfoliated graphene oxide (GO). Exfoliated GO sheets were sequentially subject to the epoxide ring‐opening reaction with tris(hydroxymethyl) aminomethane (TRIS) to increase the amount of reactive sites, the esterification with 2‐bromo‐2‐methylpropionyl bromide to introduce the Br‐containing initiating groups, and the surface‐initiated single electron transfer–living radical polymerization of N‐isopropylacrylamide (NIPAM) to tune the molecular weights of grafted polymers. All these reactions were performed at ambient temperature without losing any other oxygen‐containing functionality on GO. The resulting TRIS‐GO‐PNIPAM nanocomposites still maintain the separated single layers in dispersion, and the dispersibilities in organic solvents are significantly improved. Meanwhile, the aqueous dispersion of TRIS‐GO‐PNIPAM shows reversible temperature switching self‐assembly and disassembly behavior at about 40°C. Such smart graphene‐based hybrid materials are promising for applications in nanoelectronics, sensors, and microfluidic switches. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Doping of TiO2–GO and TiO2–rGO with Noble Metals: Synthesis,Characterization and Photocatalytic Performance for Azo Dye Discoloration

The nanocomposites of titania coupled with graphene oxide (GO) and reduced graphene oxide (rGO), respectively, were prepared by homogeneous hydrolysis with urea. Graphene was obtained by effect of high‐intensity cavitation field on natural graphite in the presence of strong aprotic solvents in pressurized ultrasonic reactor. The morphology of TiO₂–GO and TiO₂–rGO composites was assessed by scanning electron microscopy and atomic force microscopy. The nitrogen adsorption–desorption was used for determination of surface area (BET) and porosity. Raman and IR spectroscopy were used for qualitative analysis and diffuse reflectance spectroscopy was employed to estimate band‐gap energies. Further enhancement of the photocatalytic activity was attained by codoping of composites with noble metals—Au, Pd and Pt. The photocatalytic activity of TiO₂–GO and TiO₂–rGO were assessed by photocatalytic decomposition of Orange II dye in an aqueous slurry under UV and visible light irradiation. The photocatalytic activity of noble metals codoped samples was determined with decomposition of Reactive Black 5 azo dye.     

Electrochemical‐Reduction‐Assisted Assembly of a Polyoxometalate/Graphene Nanocomposite and Its Enhanced Lithium‐Storage Performance

Herein, we present an electrochemically assisted method for the reduction of graphene oxide (GO) and the assembly of polyoxometalate clusters on the reduced GO (rGO) nanosheets for the preparation of nanocomposites. In this method, the Keggin‐type H₄SiW₁₂O₄₀ (SiW₁₂) is used as an electrocatalyst. During the reduction process, SiW₁₂ transfers the electrons from the electrode to GO, leading to a deep reduction of GO in which the content of oxygen‐containing groups is decreased to around 5 %. Meanwhile, the strong adsorption effect between the SiW₁₂ clusters and rGO nanosheets induces the spontaneous assembly of SiW₁₂ on rGO in a uniformly dispersed state, forming a porous, powder‐type nanocomposite. More importantly, the nanocomposite shows an enhanced capacity of 275 mAh g^?1 as a cathode active material for lithium storage, which is 1.7 times that of the pure SiW₁₂. This enhancement is attributed to the synergistic effect of the conductive rGO support and the well‐dispersed state of the SiW₁₂ clusters, which facilitate the electron transfer and lithium‐ion diffusion, respectively. Considering the facile, mild, and environmentally benign features of this method, it is reasonable as a general route for the incorporation of more types of functional polyoxometalates onto graphene matrices; this may allow the creation of nanocomposites for versatile applications, for example, in the fields of catalysis, electronics, and energy storage.     

An injectable and biomimetic multi‐phase nanocomposite for non‐invasive bone tissue engineering: fabrication and mechanistic evaluation

An injectable, non‐hardening nanocomposite bone graft has been developed using a combination of nanohydroxyapatite as bioactive and osseointegrative material; P‐15 peptide‐modified poly(lactic‐co‐glycolic acid) (PLGA) microspheres as biomimetic and osteoinductive agent; and PLGA–poly(ethylene glycol) (PEG)–PLGA as a carrier gel. Increase in lactic acid/glycolic acid ratio of PLGA–PEG–PLGA resulted in stronger gels with a wider gelation window. Addition of 2.5‐fold nanohydroxyapatite resulted in significant changes in injectability (3.5‐fold force of injection), swelling characteristics (2.5 times swelling index), rheological (shear viscosity from 2.1 × 10¹ Pa s for NC3_700 to 1.5 × 10⁶ Pa s for NC3_73.52 and from 3.9 × 10² Pa s for NC8_700 to 3.76 × 10⁶ Pa s for NC8_732; an increase in elasticity at the level of 1–1000 kPa), and thermal properties of the nanocomposites. A mechanistic study showed that nanohydroxyapatite exhibits a high degree of association with the gel and interferes with its gelation owing to changes in hydrogen bonding interactions between C=?O of polymer chains and P–OH groups of nanohydroxyapatite with water molecules of the gel. A schematic was developed demonstrating changes in bonding interactions among constituent phases with respect to nanohydroxyapatite content emphasizing the importance of material interactions while fabricating multi‐phase nanocomposites for various biomedical applications. Copyright © 2017 John Wiley & Sons, Ltd.     

Layer‐by‐layer Assembled Multilayers of Graphene/Mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin for Detection of Dopamine

Graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin multilayer films composed of graphene sheet (GS) and mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were fabricated easily by two steps. First, negatively charged graphene oxide (GO) and positively charged mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were layer‐by‐layer (LBL) self‐assembled on glassy carbon electrode (GCE) modified with a layer of poly(diallyldimethylammonium chloride) (PDDA). Then graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GS/NH₂‐β‐CD) multilayer films were built up by electrochemical reduction of graphene oxide/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GO/NH₂‐β‐CD). Combining the high surface area of GS and the active recognition sites on β‐cyclodextrin (β‐CD), the GS/NH₂‐β‐CD multilayer films show excellent electrochemical sensing performance for the detection of DA with an extraordinary broad linear range from 2.53 to 980.05 µmol·L^?1. This study offers a simple route to the controllable formation of graphene‐based electrochemical sensor for the detection of DA.     

Antimonene Quantum Dots: Synthesis and Application as Near‐Infrared Photothermal Agents for Effective Cancer Therapy

Photothermal therapy (PTT) has shown significant potential for cancer therapy. However, developing nanomaterials (NMs)‐based photothermal agents (PTAs) with satisfactory photothermal conversion efficacy (PTCE) and biocompatibility remains a key challenge. Herein, a new generation of PTAs based on two‐dimensional (2D) antimonene quantum dots (AMQDs) was developed by a novel liquid exfoliation method. Surface modification of AMQDs with polyethylene glycol (PEG) significantly enhanced both biocompatibility and stability in physiological medium. The PEG‐coated AMQDs showed a PTCE of 45.5 %, which is higher than many other NMs‐based PTAs such as graphene, Au, MoS₂, and black phosphorus (BP). The AMQDs‐based PTAs also exhibited a unique feature of NIR‐induced rapid degradability. Through both in vitro and in vivo studies, the PEG‐coated AMQDs demonstrated notable NIR‐induced tumor ablation ability. This work is expected to expand the utility of 2D antimonene (AM) to biomedical applications through the development of an entirely novel PTA platform.     

Nickel‐substituted cobalt ferrite nanoparticles supported on arginine‐modified graphene oxide nanosheets: Synthesis and catalytic activity

The amino acid arginine was used to modify the surface of graphene oxide nanosheets and then nickel‐substituted cobalt ferrite nanoparticles were supported on those arginine‐grafted graphene oxide nanosheets (Ni_0.5Co_0.5Fe₂O₄@Arg–GO). The prepared Ni_0.5Co_0.5Fe₂O₄@Arg–GO was characterized using flame atomic absorption spectroscopy, inductively coupled plasma optical emission spectrometry, energy‐dispersive spectroscopy, Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, Raman spectroscopy, X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy and transmission electron microscopy. The application of Ni_0.5Co_0.5Fe₂O₄@Arg–GO as a catalyst was examined in a one‐pot tandem oxidative cyclization of primary alcohols with o ‐phenylenediamine to benzimidazoles under aerobic oxidation conditions. The results showed that 2‐phenylbenzimidazole derivatives were successfully achieved using Ni_0.5Co_0.5Fe₂O₄@Arg–GO nanocomposite catalyst via the one‐pot tandem oxidative cyclization strategy.     

Role of PVA in synthesis of nano Co3O4‐decorated graphene oxide

Polymeric materials have been found to be ideal candidates for the synthesis of organic–inorganic nanomaterials. We have obtained Co₃O₄‐decorated graphene oxide (GO) nanocomposites by a simple polymer combustion method. Polyvinyl alcohol (PVA) of two different molecular weights, 14,000 and 125,000, was used for the synthesis. The pristine sample was annealed at 300, 500, and 800°C. PVA has played an important role in the formation of GO and Co₃O₄ nanoparticles. Synthesized Co₃O₄–GO nanocomposites were characterized by X‐ray diffraction, Fourier transform infrared, Raman, electron paramagnetic resonance, transmission electron microscopy, and vibrating sample magnetometry. Reflection peaks at 12° and 37° in an X‐ray study confirm the formation of Co₃O₄–GO. Raman study validates the presence of GO in nanocomposites of Co₃O₄–GO. Room temperature ferromagnetism was observed in all annealed samples. The highest coercivity of 462 G was observed for 300°C annealed samples as compared with bulk Co₃O₄. On the basis of the results obtained, a mechanism of formation is proposed. Copyright © 2015 John Wiley & Sons, Ltd.     

Graphene‐Functionalized 3D‐Carbon Fiber Electrodes – Preparation and Electrochemical Characterization

Graphene nanosheets were produced on the surface of carbon fibers by in situ electrochemical procedure including oxidative and reductive steps to yield first graphene oxide, later converted to graphene. The electrode material composed of graphene‐functionalized carbon fibers was characterized by scanning electron microscopy (SEM) and cyclic voltammery demonstrating superior electrochemical kinetics comparing with the original carbon paper. The interfacial electron transfer rate for the reversible redox process of [Fe(CN)₆]^3?/4? was found ca. 4.5‐fold higher after the electrode modification with the graphene nanosheets. The novel electrode material is suggested as a promising conducting interface for bioelectrocatalytic electrodes used in various electrochemical biosensors and biofuel cells, particularly operating in vivo.     

Preparation and applications of novel cross‐linked fluoroalkyl end‐capped oligomeric nanocomposites possessing aromatic siloxane segments as core units

Fluoroalkyl end‐capped N,N‐dimethylacrylamide oligomer and N‐(1,1‐dimethyl‐3‐oxobutyl)acrylamide oligomer were reacted with phenylene‐ and biphenylene‐bridged ethoxysilanes under alkaline conditions to yield cross‐linked fluoroalkyl end‐capped oligomeric composites possessing aromatic siloxane segments as core units. These isolated fluorinated composite powders were found to be nanometer size‐controlled fine particles with a good dispersibility and stability in water and organic solvents. Nitrogen adsorption–desorption isotherms confirmed the presence of micropores in these nanocomposites; the micropore size estimated by the HK method was 0.7–0.8 nm. Interestingly, fluorinated nanocomposites possessing a higher micropore volume ratio were found to exhibit a selective encapsulation ability of fullerene into their composite cores. These fluorinated nanocomposites were also applied to the surface modification of poly(methyl methacrylate) film, resulting in a good oleophobicity imparted by fluorine on the surface. In addition, fluorescence emission was visibly observed only from the modified PMMA film surface treated with fluorinated nanocomposites possessing biphenylene units when irradiated by light. Copyright © 2009 John Wiley & Sons, Ltd.