Two-dimensional stokes flow of a viscous fluid with a free boundary under the effect of capillary forces

Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, No. 5, pp. 47–51, September–October, 1992.     

Pulsating laminar flow of a viscous fluid in a capillary

The possibility of using the hypothesis of quasistationarity for a pulsating laminar flow of viscous fluid in a capillary has been tested experimentally. It is shown that for the given parameters the use of this hypothesis leads to a satisfactory agreement between theory and experiment.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 175–176, May–June, 1982.     

Cavitation flow calculations for a viscous and capillary fluid

Developed cavitation calculations, where the cavity forms a void directly adjoining and stationary relative to the body, have been carried out almost exclusively within the framework of ideal fluid mechanics [1, 2]. Experiments (for example, [2, 3]), however, indicate that viscosity and capillarity have an undoubted influence on cavitation flows. In the case of developed cavities behind nonlifting bodies this effect has been taken into account [4] in terms of the dependence of the arc abscissa of the beginning of the cavity on the Weber and Reynolds numbers We and Re for a given value of the cavitation number. In calculating a partial cavity (of a length not exceeding that of the body in the flow) it is necessary to take into account the development of the boundary layer on the cavity and the presence of viscous separation zones not only in front of but also behind it. In this paper a method of calculating partial cavitation satisfying these requirements is proposed, and problems relating to the justification of the method are discussed. The cavitation calculations presented employ the flow model described in [5], which takes into account the presence of the boundary layer on the body and the cavity, together with the viscous separation zones. The calculation method is a development of that described in [6] and makes important use of an idea derived from [2, 7]. In this connection, the fact that the characteristics of the boundary layer in cavitation flow past bodies have not been sufficiently studied has made it necessary to resort to a numerical experiment to close the semiempirical relations used in the calculations.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 45–51, November–December, 1985.     

Symmetry of a periodic array of particles and a viscous fluid flow in the stokes approximation

A suspension in which rigid spherical particles of the same radius form a periodic array is considered. A general solution of the Stokes equations periodic with respect to this array is obtained. With reference to a fluid flow through a fixed array and a shear flow with frozen-in particles it is shown that taking the array structure and the symmetry of the conditions on the particle surface into account leads to a considerable simplification of the problem and makes it possible to determine the velocity and pressure distributions over the fluid.     

Approximate calculation of three-dimensional cavitating flow around propeller blades in a viscous capillary fluid

Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 83–90, November–December, 1990.     

Diffusion toward a cylinder in the case of an arbitrary viscous flow. Diffusive boundary layer approximation

Steady convective diffusion of a dissolved substance toward the surface of a cylinder (optionally circular) in a viscous flow is examined. An analytical solution is obtained in [1, 2] for the case of laminar flow around a curved cylinder when the freestream flow is straight and uniform. More complex hydrodynamical problems are examined in [3, 4]. In the present work an approximate analytical expression is obtained for diffusive flow of a substance toward the surface of a solid cylinder in the case of an arbitrary two-dimensional flow. Formulas are given for calculating the mass transfer at a circular cylinder in some shear flows of a viscous, incompressible fluid.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 163–166, September–October, 1976.The authors thank Yu. P. Gupalo and Yu. S. Ryazantseva for formulating the problem and their attention to the work.     

Simulation of viscous fluid flow with consideration of boundary outflow and pressure drop

The problem of modeling a viscous fluid flow over the surface of a plate is considered when the pressure changes along the longitudinal coordinate according to a linear law. The corresponding boundary conditions are formulated for this problem. The Navier-Stokes equations are solved exactly in the problem of flow past the plate for the case of fluid outflow and a longitudinal pressure drop. Several formulas to determine the velocity profile are derived. The limiting cases are analyzed to study the consistency of various models. The corresponding pressure conditions are proposed for the case when the Navier-Stokes system has a known exact solution.     

Plane vortex flow induced by a mass source (sink) in a rotating viscous fluid

A solution of the self-similar type, describing the development with time of a plane vortex flow excited by an axisymmetric mass source (sink) in a rotating viscous fluid, is obtained. Sources of two kinds — impulsive and of constant strength — are considered. The solutions for the velocity and vorticity fields are expressed in the form of functions similar to incomplete gamma functions and are presented in the form of graphs for various flow Reynolds numbers.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 172–175, July–August, 1991.     

The Stokes boundary layer for a power-law fluid

We develop semi-analytical, self-similar solutions for the oscillatory boundary layer (‘Stokes layer’) in a semi-infinite power-law fluid bounded by an oscillating wall (the so-called Stokes problem). These solutions differ significantly from the classical solution for a Newtonian fluid, both in the non-sinusoidal form of the velocity oscillations and in the manner at which their amplitude decays with distance from the wall. In particular, for shear-thickening fluids the velocity reaches zero at a finite distance from the wall, and for shear-thinning fluids it decays algebraically with distance, in contrast to the exponential decay for a Newtonian fluid. We demonstrate numerically that these semi-analytical, self-similar solutions provide a good approximation to the flow driven by a sinusoidally oscillating wall.     

Stokes flow before plane boundary with mixed stick-slip boundary conditions

A general theorem for the Stokes flow over a plane boundary with mixed stick-slip boundary conditions is established. This is done by using a representation for the velocity and pressure fields in the three-dimensional Stokes flow in terms of a biharmonic function and a harmonic function. The earlier theorem for the Stokes flow due to fundamental singularities before a no-slip plane boundary is shown to be a special case of the present theorem. Furthermore, in terms of the Stokes stream function, a corollary of the theorem is also derived, providing a solution to the problem of the axisymmetric Stokes flow along a rigid plane with stick-slip boundary conditions. The formulae for the drag and torque exerted by the fluid on the boundary are established. An illustrative example is given.     

Unsteady jet flow of a viscous fluid

A solution is obtained, within the framework of the boundary layer theory, to the problem of the unsteady flow created by a two-dimensional jet source for a given momentum flux variation with time. In particular, aperiodic and periodic momentum variations are examined, and a qualitative analog with turbulent flow is noted for the latter.     

Hydromagnetic Stokes flow in a rotating fluid with suspended small particles

An initial value investigation is made of the motion of an incompressible, viscous conducting fluid with embedded small spherical particles bounded by an infinite rigid non-conducting plate. Both the plate and the fluid are in a state of solid body rotation with constant angular velocity about an axis normal to the plate. The flow is generated in the fluid-particle system due to non-torsional oscillations of a given frequency superimposed on the plate in the presence of a transverse magnetic field. The operational method is used to derive exact solutions for the fluid and the particle velocities, and the wall shear stress. The small and the large time behaviour of the solutions is discussed in some detail. The ultimate steady-state solutions and the structure of the associated boundary layers are determined with physical implications. It is shown that rotation and magnetic field affect the motion of the fluid relatively earlier than that of the particles when the time is small. The motion for large times is set up through inertial oscillations of frequency equal to twice the angular velocity of rotation. The ultimate boundary layers are established through inertial oscillations. The shear stress at the plate is calculated for all values of the frequency parameter. The small and large-time behaviour of the shear stress is discussed. The exact solutions for the velocity of fluid and the wall shear stress are evaluated numerically for the case of an impulsively moved plate. It is found that the drag and the lateral stress on the plate fluctuate during the non-equilibrium process of relaxation if the rotation is large. The present analysis is very general in the sense that many known results in various configurations are found to follow as special cases.     

Mathematical modeling of viscous gas flow in a doubly connected volume with perforated walls

A numerical method is proposed for computing viscous gas flow in an initial doubly connected domain which is a volume having perforated walls and enclosing a sphere. The types of subdomains (finite volumes) into which the initial domain can be divided are considered. For each type of finite volume, there is a curvilinear coordinate system. Results of flow computation for Re = 100 and 500, and M = 0.6 are given.     

Nonlinear capillary waves on a viscous fluid jet surface

Capillary instability of a fluid jet is one of the classical problems of hydrodynamics [1]. Studying it is of practical interest, particularly for the optimization of the ignition of a liquid propellant and the development of granulating apparatus in the chemical industry [2]. Until recently, the main attention has been paid to analyzing linear problems. Dispersion equations have been obtained for small perturbations of a jet surface with the viscosity of the external medium taken into account [3]. The construction of a theory of finite-amplitude waves on an ideal fluid jet surface was started in [4, 5]. Up to now this theory has achieved substantial results, as can be assessed by the successful numerical modeling of the dissociation of an inviscid fluid jet into drops [6] (see [7, 8] also). This paper is devoted to a discussion of the nonlinear development stage of viscous fluid jet instability under conditions allowing the influence of the surrounding medium and the gravity field to be neglected.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 179–182, March–April, 1977.The author is grateful to B. M. Konyukhov and G. D. Kuvatov for suggesting this problem and performing the experiment and to M. I. Rabinovich for useful discussions.     

Motion of a nonrectilinear fiber in a viscous fluid flow

The plane problem of dynamic interaction of a laminar viscous fluid flow and an inextensible pliable fiber of finite length is solved using the perturbation method. Two types of rheological twodimensional flows — pure shear and simple shear — are considered. Formulas are obtained for the evolution of the tensile force and the shape of the fiber. Results of asymptotic and numerical calculations are compared.     

Cylinder in viscous incompressible fluid flow

We present a technique for calculating the temperature field in the vicinity of a cylinder in a viscous incompressible fluid flow under given conditions for the heat flux or the cylinder surface temperature. The Navier-Stokes equations and the energy equation for the steady heat transfer regime form the basis of the calculations. The numerical calculations are made for three flow regimes about the cylinder, corresponding to Reynolds numbers of 20, 40, and 80. The pressure distribution, voracity, and temperature distributions along the cylinder surface are found.It is known that for a Reynolds number R>1 the calculation of cylinder drag within the framework of the solution of the Oseen and Stokes equations yields a significant deviation from the experimental data. In 1933 Thom first solved this problem [1] on the basis of the Navier-Stokes equations. Subsequently several investigators [2, 3] studied the problem of viscous incompressible fluid flow past a cylinder.It has been established that a stable solution of the Navier-Stokes equations exists for R40 and that in this case the calculation results are in good agreement with the experimental data. According to [2], a stable solution also exists for R=44. The possibility of obtaining a steady solution for R>44 is suggested.Analysis of the results of [2] permits suggesting that the questions of constructing a difference scheme with a given order of approximation of the basic differential relations which will permit obtaining the sought solution over the entire range of variation of the problem parameters of interest are still worthy of attention.Calculation of the velocity field in the vicinity of a cylinder also makes possible the calculation of the cylinder temperature regime for given conditions for the heat flux or the temperature on its surface. However, we are familiar only with experience in the analytic solution of several questions of cylinder heat transfer with the surrounding fluid for large R within the framework of boundary layer theory [4].