Aqueous chromatographic system for the quantification of propofol in biological fluids using a temperature-responsive polymer modified stationary phase

A new method for the quantitative analysis of monkey serum propofol, which is widely used as an anaesthetic agent, was developed by utilizing a temperature-responsive polymer of N-isopropylacrylamide (NIPAAm) and butyl methacrylate (BMA) as the stationary phase of HPLC–fluorescence detection. This poly(NIPAAm-co-BMA) copolymer undergoes a reversible phase transition from a hydrophilic to a hydrophobic microstructure when triggered by change in the temperature. Also this chromatographic system is possible to separate the analytes by using only water as a mobile phase. A pretreatment of the serum (80 μL) was only solid-phase extraction, and the recovery rate of propofol and internal standard was more than 77%, respectively. This method covered the calibration range from 0.5 μg/mL to 10 μg/mL and allowed a reproducible quantification of the serum propofol in administrated monkey serum. The intra- and inter-assay relative standard deviations were less than 14.1%. In addition, there was good relationship of the quantification values between the developed method and the widely used reversed-phase HPLC method. Our developed method has proven to be useful for a simple analysis of propofol in clinical practice, because the avoidance of complicated mobile phase preparation was possible, and only temperature changing could regulate the retention time of the analyte. In addition, by using water instead of fossil fuel, it is the ideal analytical method according to green chemistry.     

Preparation and characterization of temperature-responsive poly(N-isopropylacrylamide-co-N,N'-methylenebisacrylamide) monolith for HPLC

A temperature-responsive poly(N-isopropylacrylamide-co-N,N'-methylenebisacrylamide) [poly(NIPAAm-co-BIS)] monolith was prepared via a free-radical polymerization technique using an aqueous redox initiator in solution at -12°C. The effect of the % T (total monomer concentration/100 mL) and % C (cross-linker concentration/100 mL) on the visual form was investigated. The effect of the porogen on the pore structure was characterized by SEM. Under the optimum condition, the monolith for HPLC was successfully prepared and its mechanical strength and permeability have been studied. Furthermore, a temperature-dependent resolution of aromatic ketones was achieved using only water as mobile phase. The increasing interaction between solutes and the monolith was observed when temperature increased. The theoretical plate number of every analyte was more than 10(4).     

Study on interaction between Tb(III) and poly(N-isopropylacrylamide)

A new kind of the thermo-sensitive and fluorescent complex of poly(N-isopropylacrylamide) (PNIPAM) and Tb(III) was synthesized by free radical polymerization, in which PNIPAM was used as a polymer ligand. The complex was characterized by using X-ray photoelectron spectroscopy (XPS), ultraviolet-visual (UV), Fourier transform infrared (FT-IR) and fluorescence spectroscopy. The results from the experiments indicated that there is a strong interaction between PNIPAM and Tb(III), leading to a decrease in the electron density of nitrogen and oxygen atoms and an increase in the electron density of Tb(III) in the PNIPAM containing Tb(III) by contrast with PNIPAM and Tb(III), respectively, meanwhile, exhibiting that the Tb(III) is mainly bonded to oxygen atoms in the polymer chain of PNIPAM and formed the complex of PNIPAM-Tb(III). After forming the PNIPAM-Tb(III) complex, the emission fluorescence intensity of Tb(III) in the PNIPAM-Tb(III) complex is significantly enhanced because the effective intramolecular energy transfer from PNIPAM to Tb(III). Especially, the emission intensity of the fluorescence peak at 547 nm can be increased as high as 145 times comparing with that of the pure Tb(III). The intramolecular energy transfer efficiency for fluorescence peak at 547 nm can reach as high as 68%. The fluorescence intensity is related the weight ratio of Tb(III) and PNIPAM in the PNIPAM-Tb(III) complex. When the weight ratio is 1.4%, the maximum fluorescence enhancement can be obtained. Nevertheless, the lower critical solution temperature of PNIPAM containing a low content of Tb(III) has not obviously changed after the formation of the complex of PNIPAM-Tb(III) by the interaction between PNIPAM and Tb(III). This novel thermosensitive and fluorescence characterization of the PNIPAM-Tb(III) complex may be useful in the fluorescence systems and the biomedical field.     

Lower critical solution temperature control and swelling behaviour of physically crosslinked thermosensitive copolymers based on N-isopropylacrylamide

In this contribution we have developed thermosensitive polymer matrices based on N-isopropylacrylamide (NIPAAm). Preparation of the hydrogels involved photopolymerisation of a combination of NIPAAm, 1-vinyl-2-pyrrolidinone (NVP) and distilled water, in appropriate amounts and contained a UV-light sensitive initiator called 1-hydroxycyclohexylphenylketone. As NIPAAm monomer could be readily dissolved in mixtures of liquid NVP and distilled water, the use of organic solvents was not required in the polymerisation process. Furthermore, chemical crosslinking agents are not needed in the synthesis. By alternating the feed ratio, hydrogels were synthesised to have lower critical solution temperatures (LCST) in the vicinity of 37 °C. This ability to shift the phase transition temperature of the gels provides excellent flexibility in tailoring transitions for specific uses. The transition temperature of the pseudo gels was established using cloud point measurement and modulated differential scanning calorimetry (MDSC). The chemical structure of the xerogels was characterised by means of Fourier transform infrared spectroscopy (Ftir), while swelling experiments in distilled water indicate that the swelling and dissolution behaviour of the gels is strongly temperature dependent.     

Study on interaction between Tb(III) and poly(N-isopropylacrylamide)-g-poly(N-isopropylacrylamide-co-styrene) core-shell nanoparticles

Based on the synthesis of poly(N-isopropylacrylamide-co-styrene) P(NIPAM-co-St) and poly(N-isopropylacrylamide) (PNIPAM) grafted P(NIPAM-co-St) core-shell nanoparticle, a new kind of thermoresponsive and fluorescent complex of Tb(III) and PNIPAM-g-P(NIPAM-co-St) (PNNS) was successfully prepared. The PNNS-Tb(III) complex was characterized with the different techniques. It was found that when PNNS with the core-shell structure interact with Tb(III), Tb(III) mainly bonded to O of the carbonyl groups of PNNS, forming the novel PNNS-Tb(III) complex. After forming the complex, the emission fluorescence intensity of Tb(III) in the complex is significantly enhanced. Especially, the maximum emission intensity of the PNNS-Tb(III) complex at 545 nm is enhanced about 223 times comparing to that of the pure Tb(III) because the effective intramolecular energy transfer from PNNS to Tb(III). The intramolecular energy transfer efficiency from PNNS to Tb(III) reaches 50%. The fluorescence intensity is related the weight ratio of Tb(III) and PNNS in the PNNS-Tb(III) complex. When the weight ratio of Tb(III) and the PNNS is 12 wt%, the enhancement of the emission fluorescence intensity at 545 nm is highest. This novel fluorescence characterization of the PNNS-Tb(III) complex may be useful in the fluorescence systems and the biomedical field.     

The synthesis, characterisation, phase behaviour and swelling of temperature sensitive physically crosslinked poly(1-vinyl-2-pyrrolidinone)/poly(N-isopropylacrylamide) hydrogels

Physically crosslinked complexes of polyvinyl pyrrolidinone-poly (N-isopropylacrylamide) (PVP-PNIPAAm) were prepared by photopolymerisation from a mixture of the monomers 1-vinyl-2-pyrrolidinone and N-isopropylacrylamide. IR spectroscopy and calorimetry were used to characterise the resulting xerogels. By alternating the monomer feed ratio, copolymers were synthesised to have their own distinctive lower critical solution temperature (LCST). The transition temperature of the gels was established using cloud point measurement and modulated differential scanning calorimeter (MDSC). This ability to shift the phase transition temperature of the copolymers provides excellent flexibility in tailoring transitions for specific uses. Swelling experiments were performed on the copolymer disks in distilled water at varying temperatures to establish the behaviour of the gels above and below phase transition temperature. The results obtained show that below transition temperature, the gels are water soluble but above this temperature they are slightly less water soluble; significantly less water soluble; or water insoluble; depending on the composition and LCST of the gel.     

Studies on preparation and properties of NIPAAm/hydrophobic monomer copolymeric hydrogels

A series of thermoreversible copolymeric hydrogels with various molar ratios of N-isopropylacrylamide (NIPAAm) and hydrophobic monomers such as 2,2,3,3,4,4,5,5-octafluoropentyl methacrylate (OFPMA) and n-butyl methacrylate (BMA) were prepared by emulsion polymerization. The effect of hydrophobic monomer on the swelling behavior and mechanical properties of the present copolymeric hydrogels was investigated. Results showed that the equilibrium swelling ratio and critical gel transition temperature (CGTT) decreased with an increase of the content of hydrophobic monomer, but the gel strength of the gel increased with an increase of the content of hydrophobic monomer. Due to stronger hydrophobicity of OFPMA, the NIPAAm/OFPMA copolymeric hydrogels had lower swelling ratios and higher gel strengths than NIPAAm/BMA copolymeric gels.     

Temperature-responsive chromatography for the separation of biomolecules

Temperature-responsive chromatography for the separation of biomolecules utilizing poly(N-isopropylacrylamide) (PNIPAAm) and its copolymer-modified stationary phase is performed with an aqueous mobile phase without using organic solvent. The surface properties and function of the stationary phase are controlled by external temperature changes without changing the mobile-phase composition. This analytical system is based on nonspecific adsorption by the reversible transition of a hydrophilic-hydrophobic PNIPAAm-grafted surface. The driving force for retention is hydrophobic interaction between the solute molecules and the hydrophobized polymer chains on the stationary phase surface. The separation of the biomolecules, such as nucleotides and proteins was achieved by a dual temperature- and pH-responsive chromatography system. The electrostatic and hydrophobic interactions could be modulated simultaneously with the temperature in an aqueous mobile phase, thus the separation system would have potential applications in the separation of biomolecules. Additionally, chromatographic matrices prepared by a surface-initiated atom transfer radical polymerization (ATRP) exhibit a strong interaction with analytes, because the polymerization procedure forms a densely packed polymer, called a polymer brush, on the surfaces. The copolymer brush grafted surfaces prepared by ATRP was an effective tool for separating basic biomolecules by modulating the electrostatic and hydrophobic interactions. Applications of thermally responsive columns for the separations of biomolecules are reviewed here.     

Random copolymers of N-isopropylacrylamide and methacrylic acid monomers with hydrophobic spacers: pH-tunable temperature sensitive materials

Two series of random copolymers of N-isopropylacrylamide (NIPAAm) and comonomers derived from methacrylic acid with a different number of methylene units as hydrophobic spacers (n=4, 7 and 10) were synthesized via free radicals. The first series was prepared having the acid groups methoxy-protected while the second series have the acid groups free. The NIPAAm-copolymers of both series were prepared varying the comonomer content from 5 to 20 mol%. All the copolymers were characterized by FTIR, DSC, ¹H NMR and SLS. The aqueous solution behaviour of the copolymers having methoxy-protected acid groups shows that the comonomer increases the hydrophobicity of the copolymer chain and decreases its lower critical solution temperature (LCST). For the copolymers having free acid groups, hydrogen-bonding is responsible for a further decrease in the LCST of these copolymers in pure water. In buffer solutions, every acid comonomer have a critical ionization degree (α_crit) above which the LCST increases with increasing comonomer content while at an ionization degree lower than α_crit the LCST decreases with increasing comonomer content. In dependence of comonomer content, number of methylene units in the spacer and the pH of the buffer solution, the LCST of the copolymers can be varied widely, showing that these random copolymers have pH-tunable temperature sensitivity.     

FTIR study on molecular structure of poly(N-isopropylacrylamide) in mixed solvent of methanol and water

The intrachain and interchain hydrogen bonding of poly(N-isopropylacrylamide) (PNIPA) and intermolecular hydrogen bonding between PNIPA chains and the solvent molecules in the mixed solvent of methanol and water have been quantitatively investigated by using Fourier transform infrared (FTIR) spectroscopy at 25 °C. In this spectroscopic system with curve fitting program, we found that in the C-H stretching region, both the N-isopropyl group and the backbone underwent conformational change upon the solvent composition. An analysis of the amide I band suggested that the amide groups of PNIPA were mainly involved in intermolecular hydrogen bonding with water molecules, and the polymer chains were flexible and disordered in the mixed solvent when the methanol volume fraction (χ_v) was lower than 15%. While χ_v was in the range of 15-65%, about 30% of these intermolecular hydrogen bonding between the polymer and water were replaced by intrachain and interchain hydrogen bonding, consequently, PNIPA shrinked as aggregates. If χ_v was above 65%, the interchain hydrogen bonding became predominant due to the solubility characteristics of amphiphilic methanol, and the PNIPA system was homogeneous solution again. We believe that the reentrant transition is related to the weaker interaction between PNIPA molecules and methanol-water complexes, (H₂O)_m(CH₃OH)_n (m/n = 5/1, 5/2, 5/3, 5/4, 5/5) as compared to that between PNIPA and free water or free methanol.     

Electrochemically produced responsive hydrogel films: influence of added salt on thickness and morphology

We report on electrochemically prepared hydrogel layers of poly-N-isopropylacrylamide (pNIPAm) and on the influence that the supporting electrolyte has on their thickness and morphology. Ions that are destabilizing in the Hofmeister sense increase the thickness. The effect correlates well with the ion's tendency to lower the lower critical solution temperature (LCST) of pNIPAm films. AFM micrographs show small-scale globules. When the films were produced in the presence of a destabilizing salt (such as ammonium sulfate) one also observes larger features, resembling wrinkles. We attribute the globules to nucleated growth of surface-attached microgels, whereas the wrinkles presumably are produced by the collapse of hydrogen bubbles underneath a well-crosslinked film. Adding a chain transfer agent to the reactant solution reduces the lateral heterogeneities.     

Controlling the gelation temperature of biomimetic polyisocyanides

The gelation temperature and mechanical properties of aqueous ethylene glycol-decorated polyisocyanide solutions strongly depends on the length of the glycol tail. Copolymerisation of monomers with different tail lengths allows for precise engineering of the gel properties.     

Separation of phosphorylated peptides utilizing dual pH- and temperature-responsive chromatography

The phosphorylation of a peptide is considered to be one of the most important post-translational modification reactions that can alter protein function in mammalian cells. To separate and purify, we developed a dual temperature- and pH-responsive chromatography based on terpolymer composed of N-isopropylacrylamide, N,N'-dimethylaminopropylacrylamide and butylmethacrylate. The property of the surface of the terpolymer-grafted stationary phase altered from hydrophilic to hydrophobic, and from changed to non-charged by changes in the temperature and the pH, respectively. In addition, it was possible to appear and hide ion-exchange groups on the polymer chain surface by temperature changes. These phenomena resulted from changes in the charge and the hydrophobicity of the pH- and temperature-responsive polymer on the stationary surface by controlling the temperature. In the developed environmental-responsive chromatographic system, the ionizable dimethylamino group of N,N'-dimethylaminopropylacrylamide in terpolymer played a key role for the separation. We applied the developed chromatographic system to the separation of phosphorylated compounds, such as phospho-tyrosine, phosphopeptide and oligonucleotides. At a low column temperature, the electrostatic interaction plays a predominant role for retain anionic phosphorylated compounds, because of the strong interaction between the cationic dimethylamino group in the stationary phase and the anionic phosphoric group in the analyte. On the contrary, the hydrophobic interaction became predominant upon increasing the temperature. The results showed that both the electrostatic and the hydrophobic interactions became controllable with a temperature change during the chromatographic process. Dual pH- and temperature-responsive chromatography would be very useful for biomacromolecules separation and purification.     

Hydrogen-bond-assisted syndiotactic-specific radical polymerization of N-isopropylacrylamide: The solvent effect on the stereospecificity

Radical polymerizations of N-isopropylacrylamide (NIPAAm) in several solvents at low temperatures in the absence or presence of hexamethylphosphoramide (HMPA) or 3-methyl-3-pentanol (3Me3PenOH) were examined. The isotacticities of the poly(NIPAAm)s obtained in the absence of HMPA and 3Me3PenOH at lower temperatures slightly increased as the polarities of the solvents used increased. The addition of HMPA significantly induced the syndiotactic-specificity even in polar solvents such as tetrahydrofuran and acetone, although the use of the solvents having proton-donating ability, such as chloroform, prevented the induction of the syndiotactic-specificity, even if their polarities are low. In the presence of 3Me3PenOH, a good correlation between the polarities of the solvents used and the syndiotacticities of the obtained poly(NIPAAm)s was observed, and poly(NIPAAm) with r = 73% was obtained using the toluene/methylcyclohexane mixed solvent.     

Thermodynamic study of poly(N-vinyl caprolactam) hydration at temperatures close to lower critical solution temperature

The lower critical solution temperature of aqueous solutions of poly(N-vinyl caprolactam) falls in the 305–307 K range and depends on the molecular weight of the polymer. The thermodynamic functions of mixing at 298 K have been calculated from measurements of vapor pressures and heats of dissolution and dilution. Partial Gibbs energy, partial enthalpy, and partial entropy of mixing were negative over the entire range of composition. Increasing temperature resulted in a decrease in the exothermal character of mixing. Excessive heat capacity values, calculated from the dependencies of enthalpy of mixing on temperature, were positive over the entire composition range. Heat capacity of dilute solutions was measured at 298 K and partial heat capacity of poly(N-vinyl caprolactam) at infinite dilution was shown to be positive. The data obtained point out the hydrophilic and hydrophobic hydration of poly(N-vinyl caprolactam) in aqueous solutions. Hydrophobic hydration dominates at temperatures close to binodal curve. As a result, the mutual mixing of the polymer with water is decreased and phase separation takes place.     

N,N-dimethyl-trimethylsilyl-carbamate as a derivatizing agent in gas chromatography of trichothecene mycotoxins

N,N-dimethyl-trimethylsilyl-carbamate, a commercially available silylating agent, has been tested in the derivatization of trichothecenes for the first time. Its reaction with alcohols is an autocatalytic, non-equilibrium process with volatile by-products. As a consequence of these advantageous characteristics N,N-dimethyl-trimethylsilyl-carbamate proved to be easily utilizable and effective for the derivatization of all studied trichothecenes, namely deoxynivalenol (DON), nivalenol (NIV) and 4,15-diacetoxyscirpenol (DAS). During testing also, optimum conditions (temperature: 15 °C, reaction time: 35 min) were established for the trimethylsilylation and for the gas chromatographic determination of the above-mentioned three trichothecenes. The linearity of the detector response was found to be proper in the 5-1100 ng range. (Given in the grams of trichothecene equivalent to the derivatives injected). The limit of detection is less than 1 ng for each of the studied trichothecenes. Relative standard deviations of the peak heights ranged from 0.75 to 4.32%.     

Synthesis and characterization of thermoresponsive poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-co-<Emphasis Type="Italic">N</Emphasis>-hydroxymethylacrylamide-co-2-hydroxyethyl methacrylate) hydrogels

Thermoresponsive hydrogels based on N-isopropylacrylamide, N-hydroxymethylacrylamide, and 2-hydroxyethyl methacrylate, poly(NIPAM–co-NHMAAm–co-HEMA), have been synthesized and their swelling—deswelling behavior studied as a function of NIPAM concentration, NIPAM/NHMAAm and NIPAM/HEMA mole ratio, and total monomer concentration. Copolymers varying in composition have been obtained by redox copolymerization of these three monomers. Temperature has been changed in the ranges from 4 to 70 °C at fixed pH and total ionic strength. Equilibrium swelling ratio, dynamic swelling ratio, and dynamic deswelling ratio were evaluated for all hydrogel systems. The equilibrium swelling ratios of the copolymeric gels decrease with increasing NHMAAm and HEMA content. The formation of the intermolecular hydrogen bonding between hydroxyl and amido groups decreases the hydrophilic group numbers of the gel and the affinity of the gel towards water decreases. The copolymer gels also showed rapid volume transitions with time. The time required for equilibrium shrinking increased with increasing NHMAAm and HEMA content in the gel.     

Preparation of a thermosensitive cobalt phthalocyanine/N-isopropylacrylamide copolymer and its catalytic activity on thiol

A thermosensitive copolymer of cobalt tetra(N-acryliccarbonyl)aminophthalocyanine (Co-TACAPc) and N-isopropylacrylamide (NIPA) was prepared through redox polymerization in aqueous solution, and its catalytic activity for oxidation of 2-mercaptoethanol was investigated. The products of Co-TACAPc and its copolymer were characterized by elemental analysis, IR, UV/vis, and TGA. The copolymer can be dissolved into most solvents, particularly into water over a wide range of pH. The copolymer also revealed a lower critical solution temperature (LCST) phenomenon at 32.6 degrees C in water; i.e., it was soluble in cold water (below 32.6 degrees C) but insoluble in hot water (above 32.6 degrees C). As a result, in contrast to Co-TACAPc, the copolymer is able to serve as a homogeneous catalyst on oxidation of 2-mercaptoethanol below 31.0 degrees C and be recovered with increasing temperature due to its lower solubility above 31.0 degrees C.     

Assembled catalyst of palladium and non-cross-linked amphiphilic polymer ligand for the efficient heterogeneous Heck reaction

The efficient heterogeneous Heck reaction was achieved by a new networked and supramolecular catalyst PdAS-V (1b). Employing of PdAS-V in 5.0×10⁻⁵ mol equiv. efficiently progressed the heterogeneous Heck reaction of a series of aryl iodides with acrylates, styrenes and acrylic acid. PdAS-V was successfully recycled five times without any decrease in its activity, and showed good stability in toluene and water, and hence the Heck reaction was efficiently performed in both reaction media. The use of 8.0×10⁻⁷ mol equiv. of PdAS-V resulted in the coupling product in 92% yield with the turnover number (TON) and the turnover frequency (TOF) of PdAS-V reached up to 1,150,000 and 12,000, respectively. The efficient synthesis of resveratrol was achieved via the PdAS-V-promoted Heck reaction.     

Synthesis and characterization of a novel thermosensitive gel with fast response

A gel is a kind of water-swellable but water-insoluble, crosslinked polymer. Some kinds of gels can respond to external temperature changes. This specific property is useful in biomedical and other technological fields. In this paper the synthesis of a novel, thermosensitive gel by the copolymerization of N-isopropylacrylamide or N,N- diethylacrylamide with 3-methacryloxypropyltrimethoxy silane (MPTMS) is reported. The formation of the gel is caused through the interaction of MPTMS under acidic condition. This thermosensitive gel can deswell and reswell quickly in response to the external temperature changes, this behavior probably being due to the heterogeneous structure of the gel produced. This fast-response gel may be useful both in biomedical and biotechnological fields. Received: 17 March 1999 Accepted on revised form: 9 June 1999