High-performance liquid chromatographic separation of imidazolinone herbicide enantiomers and their methyl derivatives on polysaccharide-coated chiral stationary phases

Many chiral pesticides exhibit enantioselectivity in biotransformation and ecotoxicity in the environment. A significant class of chiral pesticides is imidazolinone herbicides, of which enantioselectivity has not been well studied. Development of efficient chiral separation methods is the first step for allowing characterization of enantioselectivity in environmental processes. In this study, we attempted to resolve enantiomers of imidazolinone herbicides using reversed-phase and normal-phase high-performance liquid chromatography with polysaccharide-type chiral columns. Enantiomers of imazethapyr, imazaquin, and imazamox were separated on a Chiralcel OD-R column using 50mM phosphate buffer-acetonitrile as mobile phase. Enantiomers of imazapyr, imazapic, imazethapyr, imazamox and imazaquin were resolved on a Chiralcel OJ column using n-hexane (0.1% trifluoroacetic acid)-alcohol as mobile phase. The enantiomers of five methyl derivatives of imidazolinone herbicides were also resolved on the Chiralcel OJ column. The Deltak' values revealed a structure-enantioselectivity relationship for the separation behaviors of the enantiomers on the OJ column. The described method was successfully applied for chiral analysis of two imidazolinone herbicides (imazapyr and imazaquin) in spiked soil samples.     

Dispersive solid-phase extraction followed by dispersive liquid–liquid microextraction for the determination of some sulfonylurea herbicides in soil by high-performance liquid chromatography

Dispersive solid-phase extraction (DSPE) combined with dispersive liquid–liquid microextraction (DLLME) has been developed as a new approach for the extraction of four sulfonylurea herbicides (metsulfuron-methyl, chlorsulfuron, bensulfuron-methyl and chlorimuron-ethyl) in soil prior to high-performance liquid chromatography with diode array detection (HPLC-DAD). In the DSPE-DLLME, sulfonylurea herbicides were first extracted from soil sample into acetone–0.15 mol L⁻¹ NaHCO₃ (2:8, v/v). The clean-up of the extract by DSPE was carried out by directly adding C₁₈ sorbent into the extract solution, followed by shaking and filtration. After the pH of the filtrate was adjusted to 2.0 with 2 mol L⁻¹ HCl, 60.0 μL chlorobenzene (as extraction solvent) was added into 5.0 mL of it for DLLME procedure (the acetone contained in the solution also acted as dispersive solvent). Under the optimum conditions, the enrichment factors for the compounds were in the range between 102 and 216. The linearity of the method was in the range from 5.0 to 200 ng g⁻¹ with the correlation coefficients (r) ranging from 0.9967 to 0.9987. The method detection limits were 0.5–1.2 ng g⁻¹. The relative standard deviations varied from 5.2% to 7.2% (n = 5). The relative recoveries of the four sulfonylurea herbicides from soil samples at spiking levels of 6.0, 20.0 and 60.0 ng g⁻¹ were in the range between 76.3% and 92.5%. The proposed method has been successfully applied to the analysis of the four target sulfonylurea herbicides in soil samples, and a satisfactory result was obtained.     

Residue Analysis and Determination of IMI Herbicides in Sunflower and Soil by GC–MS

Sunflower agriculture is an important subsector that plays a key role in the economy of Turkey, contributing 1.38 million tonnes. The aim of this study is to investigate the levels of imidazolinone (IMI) group herbicides in Thrace Region, Turkey. In particular, we aimed to determine the residue levels of imazamox, a herbicide used in sunflower production in Thrace Region, in soil, different parts of plant, and seed. Five herbicides were identified in sunflower samples using solid–liquid extraction with gas chromatography–electrospray ionization mass spectrometry (GC–EI–MS) on single-quadruple instruments in selected ion monitoring (SIM) mode. The optimized conditions were found to be mobile-phase flow rate of 1 mL min^?1 and injection volume of 3 μL in programmed temperature vaporization (PTV) solvent vent mode. The recovery of imazamox, imazaquin, imazethapyr, imazapyr, and imazapic from sunflower plant and soil was 89 and 99, 104 and 105, 92 and 93, 96 and 92, and 99 and 96%, respectively.     

Determination of sugar cane herbicides in soil and soil treated with sugar cane vinasse by solid-phase extraction and HPLC-UV

This work reports on the development and validation of a small-scale and efficient SPE-HPLC-UV method for the simultaneous determination of the most used herbicides (diuron, hexazinone, and tebuthiuron) applied to soil and soil treated with sugar cane vinasse (soil-vinasse) in areas where sugar cane crops are grown in the state of São Paulo, Brazil. The analytical procedure was optimized for solvent extraction and HPLC-UV conditions. Extraction and clean-up were combined in a single step employing solid-phase extraction, avoiding sophisticated techniques, organic-solvent-water mixtures and consequently a longer concentration step. Recovery studies with soil and soil-vinasse samples spiked at two herbicides levels (around 0.25 and 2.0 mg kg⁻¹) and sample stability (sample frozen for 20 days before analysis) were applied as parameters to control the efficiency of the method. Good accuracy and precision were achieved with average recoveries ranging from 78% to 120% and relative standard deviations less than 10% throughout the whole recovery test. The method's limit of detection ranged between 0.025 and 0.050 mg kg⁻¹ for diuron, hexazinone, and tebuthiuron in soil and soil-vinasse. The feasibility of this method was applied to determine the herbicide half-lives (t_1/2) in soil and soil-vinasse in a laboratory study. Sugar cane vinasse added to soil increased the degradation of diuron and tebuthiuron (p < 0.05), reducing the t_1/2 from 80 to 7 days and 128 to 73 days, respectively. This method is presented as an alternative which could be applied to assess herbicide behavior in soil in order to prevent water contamination and to contribute to establish pesticide limits in soil.     

Determination of imazethapyr and imazapyr residues in soil by coupled-column liquid chromatography

Summary A column-switching method using two separation columns combined with UV detection at 260 or 236 nm has been used to determine the imidazolinone herbicides imazethapyr and imazapyr in soils. The residues were extracted from the soil with 0.1 M aqueous sodium carbonate solution and, after adjusting the pH to 2.0, the solution was partitioned with dichloromethane. Limits of determination for imazethapyr and imazapyr were 3 μg/kg. Recoveries were from 55 to 75% for both imidazolinone herbicides in the range 3–100 μg/kg in soil.     

The automation of the acquisition and evaluation of pyrolysis-gas chromatography-mass spectrometry data for paint samples

This study describes a sensitivity and selectivity approach based on gas chromatography-mass spectrometry to determinate morphine levels in rat biologic fluids. Optimized experimental conditions of solid-phase extraction (SPE), including pH of the sample, solvent composition, and various sorbents, are examined herein. The largest recovery is greater than 94.0% for morphine, is achieved with a mixed sorbent C₈/SCX and mixed elution CHCl₃/iso-propanol (9:1) at pH 6.8. Acetylation accomplished with acetic anhydride is utilized to derivatize morphine to 3,6-diacetylmorphine for GC/MS analysis. The proposed method was precise and a wide linear range from 0.5 to 500 ng mL⁻¹. A detection limit of 0.31 ng mL⁻¹ in urine is achieved. The maximum ratio of morphine glucuronide to morphine in the blood of rat is 6 to 1. A terminal half-life of morphine in blood is calculated as around 120 min.     

Simultaneous extraction of organotin, organolead and organomercury species from soils and litter

Extracting organotin compounds (OTC) from soils is difficult due to the high cation exchange and complexation capacity of soils, and little information about OTC in soils is available. In this study, a new extraction method, combining 1 M CaCl₂, 0.1% tropolone, and glacial acetic acid was developed. Recoveries of mono-substituted OTC from spiked plant litter, and soil samples were improved substantially to 40% compared to classical glacial acetic acid extraction commonly used in sedimentology, yielding <10% recovery in C-rich soil samples. Simultaneously, the recovery of other OTC, trimethyllead and monomethylmercury was satisfactory. The recoveries of most species from the spiked litter, upland and wetland soils exceeded 70%. The new method extracted much more organometallics from unspiked organic soils and litter than microwave- and ultrasound-assisted extraction and accelerated solvent extraction, most likely due to exchange of organometallics from the solid phase by Ca²⁺. The method is simple, highly efficient and with low contamination. Together with GC-ICP-mass spectrometry, the method allows the detection of these organometallics in the pg g⁻¹ range and it is particularly suitable for soil and plant materials with low organometallics contents.     

Barium alginate caged Fe3O4@C18 magnetic nanoparticles for the pre-concentration of polycyclic aromatic hydrocarbons and phthalate esters from environmental water samples

The hydrophobic octadecyl (C₁₈) functionalized Fe₃O₄ magnetic nanoparticles (Fe₃O₄@C₁₈) were caged into hydrophilic barium alginate (Ba²⁺-ALG) polymers to obtain a novel type of solid-phase extraction (SPE) sorbents, and the sorbents were applied to the pre-concentration of polycyclic aromatic hydrocarbons (PAHs) and phthalate esters (PAEs) pollutants from environmental water samples. The hydrophilicity of the Ba²⁺-ALG cage enhances the dispersibility of sorbents in water samples, and the superparamagnetism of the Fe₃O₄ core facilitates magnetic separation. With the magnetic SPE technique based on the Fe₃O₄@C₁₈@Ba²⁺-ALG sorbents, it requires only 30 min to extract trace levels of analytes from 500 mL water samples. After the eluate is condensed to 0.5 mL, concentration factors for both phenanthrene and di-n-propyl-phthalate are over 500, while for other analytes are about 1000. The recoveries of target compounds are independent of salinity and solution pH under testing conditions. Under optimized conditions, the detection limits for phenanthrene, pyrene, benzo[a]anthracene, and benzo[a]pyrene are 5, 5, 3, and 2 ng L⁻¹, and for di-n-propyl-phthalate, di-n-butyl-phthalate, di-cyclohexyl-phthalate, and di-n-octyl-phthalate are 36, 59, 19, and 36 ng L⁻¹, respectively. The spiked recoveries of several real water samples for PAHs and PAEs are in the range of 72-108% with relative standard deviations varying from 1% to 9%, showing good accuracy of the method. The advantages of the new SPE method include high extraction efficiency, short analysis time and convenient extraction procedure. To the best of our knowledge, it is unprecedented that hydrophilic Ba²⁺-ALG polymer caged Fe₃O₄@C₁₈ magnetic nanomaterial is used to extract organic pollutants from large volumes of water samples.     

Comparison of single and sequential extraction procedures for the study of rare earth elements remobilisation in different types of soils

With the continual increase in the utilisation of rare earth elements (REE) for industrial and agricultural purposes, research into the environmental and biogeochemical behaviour of REE had attracted much interest in recent times. This study principally describes the distribution of REE in four different types of soils like lateritic soil (S-1), in situ natural soil (S-2), soil contaminated by mining activity (S-3) and accidentally polluted soil (S-4) utilizing the optimised BCR sequential extraction procedure and partial extractions with various types of single extractants such as unbuffered salt solutions 0.1 M NaNO₃, 0.01 M CaCl₂, 1 M NH₄NO₃; complexing agents 0.005 M DTPA and 0.05 M EDTA; acid solutions 0.43 M CH₃COOH and 1 M HCl. Comparison of the sum of the four BCR fractions, which included an aqua regia attack on the residue, with the pseudo-total aqua regia digest values to assess the accuracy of the BCR partioning approach has been undertaken. Partial extraction results with several single extractants have also been reported for all the REE elements including yttrium which have been analysed by the optimised BCR procedure. Results obtained after 24 h extraction with each of the single extractant have also been discussed. The extraction with 1 M HCl during 24 h yielded similar quantities of REE as those released under the combined steps of 1, 2 and 3 of the BCR sequential extraction for all the four different type of soil samples indicating that this reagent can be used successfully to estimate the total extractable contents of REE in various types of soil samples.     

Comparison of original and modified BCR sequential extraction procedures for the fractionation of copper, iron, lead, manganese and zinc in soils and sediments

This article describes a detailed comparison between the original BCR sequential extraction procedure, step 2 of which involves treatment with 0.1 mol l⁻¹ hydroxylammonium chloride at pH 2, and the revised BCR procedure (step 2: 0.5 mol l⁻¹ hydroxylammonium chloride at pH 1.5). An intermediate protocol was also evaluated in which 0.5 mol l⁻¹ hydroxylammonium chloride at pH 2 was used. The procedures were applied to five soil and sediment substrates: a sewage sludge-amended soil, two different industrially contaminated soils, a river sediment and an inter-tidal sediment. Extractable iron and manganese concentrations were measured to assess the effects of the procedural modifications on dissolution of the reducible matrix components. Trace elements copper, lead and zinc were also determined. Statistical analysis (two-tailed t-tests at 95% confidence interval) indicated that recovery of iron in step 2 was not markedly enhanced when the intermediate protocol was used. However, significantly greater amounts were isolated with the revised BCR scheme than with the original procedure. Copper behaved similarly to iron. Lead recoveries were increased by use of both modified protocols, with the greatest effect occurring for the revised BCR extraction. In contrast, manganese and zinc extraction did not vary markedly between procedures. The work indicates that the revised BCR sequential extraction provides better attack on the iron-based components of the reducible matrix for a wide range of soils and sediments.     

Preparation of carbon coated Fe3O4 nanoparticles and their application for solid-phase extraction of polycyclic aromatic hydrocarbons from environmental water samples

The carbon coated Fe₃O₄ nanoparticles (Fe₃O₄/C) were synthesized by a simple hydrothermal reaction and applied as solid-phase extraction (SPE) sorbents to extract trace polycyclic aromatic hydrocarbons (PAHs) from environmental water samples. The Fe₃O₄/C sorbents possess high adsorption capacity and extraction efficiency due to strong adsorption ability of carbon materials and large surface area of nanoparticles, and only 50 mg of sorbents are required to extract PAHs from 1000 mL water samples. The adsorption attains equilibrium rapidly and analytes are eluted with acetonitrile readily. Salinity and solution pH have no obvious effect on the recoveries of PAHs, which avoids fussy adjustment to water sample before extraction. Under optimized conditions, the detection limits of PAHs are in the range of 0.2–0.6 ng L⁻¹. The accuracy of the method was evaluated by the recoveries of spiked samples. Good recoveries (76–110%) with low relative standard deviations from 0.8% to 9.7% are achieved. This new SPE method provides several advantages, such as high extraction efficiency, high breakthrough volumes, convenient extraction procedure, and short analysis times. To our knowledge, this is the first time that Fe₃O₄/C nanoparticles are used for the pretreatment of environmental water samples.     

The evaluation of different sorbents for the preconcentration of phenoxyacetic acid herbicides and their metabolites from soils

A procedure using alkaline extraction, solid-phase extraction (SPE) and HPLC is developed to analyze the polar herbicides 2,4-dichlorophenoxyacetic acid (2,4-D) and 4-chloro-2-methylphenoxyacetic acid (MCPA) together with their main metabolites in soils. An ion-pairing HPLC method is used for the determination as it permits the baseline separation of these highly polar herbicides and their main metabolites. The use of a highly cross-linked polystyrene-divinylbenzene sorbent (PS-DVB) gives the best results for the analysis of these compounds. This sorbent allows the direct preconcentration of the analytes at the high pH values obtained after quantitative alkaline extraction of the herbicides from soil samples. Different parameters are evaluated for the SPE preconcentration step. The high polarity of the main analytes of interest (2,4-D and MCPA) makes it necessary to work at low flow rates (< or =0.5 mL min(-1)) in order for these compounds to be retained by the PS-DVB sorbent. A two stage desorption from the SPE sorbent is required to obtain the analytes in solvents that are appropriate for HPLC determination. A first desorption with a 50:50 methanol:water mixture elutes the most polar analytes (2,4-D, MCPA and 2CP). The second elution step with methanol permits the analysis of the other phenol derivatives. The humic and fulvic substances present in the soil are not efficiently retained by PS-DVB sorbents at alkaline pH's and so do not interfere in the analysis. This method has been successfully applied in the analysis of soil samples from a golf course treated with a commercial product containing esters of 2,4-D and MCPA as the active components.     

Development and validation of a rapid multiresidue method for pesticide determination using gas chromatography-mass spectrometry: a realistic case in vineyard soils

A rapid and simultaneous method for residue identification and quantification for seven pesticides in agricultural soils has been developed to study a realistic situation in vineyard. The target compounds are two insecticides, two herbicides and three fungicides, from different chemical families. The procedure is based on a pressurized liquid extraction (PLE) with acetone, before a multiresidue GC-MS analysis. The recovery of PLE is between 53.8 ± 2.4 and 99.9 ± 4.4% according to pesticide. A limit of detection (LOD) between 1.4 and 4.6 μg kg⁻¹ of dry soil was obtained for five analytes. This procedure for testing soil contamination is sensitive and easy to perform.     

高效液相色谱-串联质谱法同时测定红小豆中残留的6种咪唑啉酮类除草剂

建立了同时测定红小豆中6种咪唑啉酮类除草剂残留的高效液相色谱-串联质谱分析方法。样品经0.1 mol/L NH4HCO3(pH 5)-甲醇(体积比为70∶30)溶液提取,二氯甲烷液-液萃取和凝胶渗透色谱净化后,采用Inertsil ODS-3色谱柱(2.1 mm×150 mm, 5 μm)分离,以甲醇-0.1%乙酸为流动相梯度洗脱,离子阱质谱在选择离子模式下测定。咪唑啉酮类除草剂在10～200 μg/L(灭草喹在5～100 μg/L)内线性关系良好,相关系数为0.9987～0.9997;方法的检出限为0.2～0.5 μg/kg;在红小豆中3个加标水平的平均加标回收率为81.6%～99.4%,相对标准偏差为3.1%～7.8%。该方法简便、灵敏度高、精密度好,适用于红小豆中多种咪唑啉酮类除草剂残留的测定。     

Three-phase system in solvent bar microextraction: An approach for the sample preparation of ionizable organic compounds prior to liquid chromatography

In this article, a simple new solvent microextraction technique is described for the extraction of ionizable organic compounds. This involves performing simultaneous forward- and back-extraction across an organic film immobilized in the pores of a porous polypropylene hollow fiber. Four chlorophenoxyacetic acid herbicides were chosen as model compounds. The target compounds are extracted from the stirred acidic aqueous sample (adjusted to 0.5 M HCl; donor phase) through a thin film of an organic solvent residing in the pores of a polypropylene hollow fiber; they are then finally extracted into another alkaline aqueous phase (1 M NaOH; acceptor phase). Both ends of the fiber are pressure-sealed. The acceptor phase was analyzed by liquid chromatography (LC). This method gave good enrichment (by a factor of 438-553) of the analytes in 40 min extraction time with reasonably good reproducibility. The analytical potential of the method was demonstrated by applying the method to spiked river water sample.     

Determination of sulfonylurea herbicides in soil extracts by solid-phase extraction and capillary zone electrophoresis

Summary Sulfonylurea herbicides in soil extracts were concentrated using off-line solid-phase extraction (SPE), and determined by capillary zone electrophoresis (CZE) and UV detection. The method involves extraction of soils with 0.1 M NaHCO₃ solution and subsequent preconcentration by using C₁₈ cartridges prior to separation of the pesticide using CZE. The results show that a C₁₈ cartridge is suitable for the purification of sulfonylurea herbicides in soil extracts with the recoveries ranging from 65–103%. The separation conditions affecting the resolution and detection sensitivity was systematically investigated. The sulfonylureas were resolved well using 30 mM sodium acetate (NaAc)/acetic acid (HAc)+10% acetonitrile (ACN) buffer at pH 4.80. The calibration plots for the test solutes in the concentration of 0.2–50 mg L⁻¹ were linear with detection limits in the range of 0.05–0.10 mgL⁻¹. The proposed method has been successfully demonstrated for the determination of sulfonylurea herbicides in soil samples.     

Micellar electrokinetic chromatography with amperometric detection and off-line solid-phase extraction for analysis of carbamate insecticides

Six selected primary carbamate insecticides, methomyl, carbaryl, carbofuran, propoxur, isoprocarb, and promecarb, were hydrolyzed in alkaline solution, resulting in electroactive derivatives detectable at a platinum (Pt) electrode poised at +0.8 V vs Ag/AgCl (3 M NaCl). The Pt electrode was inserted into a small electrochemical cell and positioned close to the capillary outlet as an end-column detector to detect the carbamate derivatives after electrophoretic separation. Based on their predicted pK_a values and aqueous solubilities, micellar electrokinetic chromatography (MEKC) was optimized for baseline separation of the derivatives using 20 mM borate, pH 10.2 containing 20 mM sodium dodecyl sulfate as a running buffer. When combined with solid-phase extraction (SPE) on octadecyl silica, a preconcentration factor of 100-fold achieved detection to 0.5 μM methomyl and to 0.01 μM for the remaining five pesticides, significantly below the level regulated by government agencies of most countries. The SPE-MEKC method when applied to the separation and analysis of spiked river water and soil samples, yielded results with excellent reproducibility, recovery and selectivity.     

Assessment of different sorbents efficiency for solid phase extraction of aquatic humic acids

In the present study, a simple procedure for the isolation by solid-phase extraction (SPE) and quantification by UV-Vis spectrometry (400 nm) of the humic acids (HAs) in the natural waters was developed. Seven different sorbents: Porapak P (polystyrene-divinylbenzene copolymer), Florisil (chemical composition: 84.0% SiO₂, 15.5% MgO and 0.5% Na₂SO₄), Silica gel C18 (octadecyl silane), Strata X (surface modified polystyrene-divinylbenzene), Strata NH₂ (silica-based trifunctional amino ligand), Strata SAX (silica-based trifunctional quaternary amine) and Strata C18-E (silica-based trifunctional C18 with hydrophobic end-capping of silanols) were tested. The HAs, adsorbed on SPE cartridges, were eluted using: NaOH (0.1 M), sodium dodecyl sulphate (SDS) (20 g L⁻¹), and a 1:1 v/v mixture of SDS (20 g L⁻¹) and NaOH (0.1 M). The extraction efficiency was evaluated by comparing the HAs recovery levels. The repeatability of results was estimated by the relative standard deviation (RSD). The data confirmed that Porapak P, Silica gel C18, Florisil, Strata NH₂ and Strata X could be good alternatives for the traditional isolation of the aquatic HAs with XAD resin. The proposed method was applied for the determination of HAs in some waters sampled from the Western Romanian Plain. The content of HAs was correlated with the arsenic concentration and total organic carbon (TOC) level.      

Determination of available phosphorus in soils by using a new extraction procedure and a flow injection amperometric system

A new extraction procedure based on an off-line extraction column was proposed for extracting of available phosphorus from soils. The column was fabricated from a plastic syringe fitted at the bottom with a cotton wool and a piece of filter paper to support a soil sample. An aliquot (50 mL) of extracting solution (0.05 M HCl + 0.0125 M H₂SO₄) was used to extract the sample under gravity flow and the eluate was collected in a polyethylene bottle. The extract was then analyzed for phosphorus contents by a simple flow injection amperometric system, employing a set of three-way solenoid valves as an injection valve. The method is based on the electrochemical reduction of 12-molybdophosphate which is produced on-line by the reaction of orthophosphate with acidic molybdate and the electrical current produced was directly proportional to the concentration of phosphate in range of 0.1-10.0 mg L⁻¹ PO₄-P, with a detection limit of 0.02 mg L⁻¹. Relative standard for 11 replicate injections of 5 mg L⁻¹ PO₄-P was 0.5%. A sample through put of 35 h⁻¹ was achieved, with consumption of 14 mg KCl, 10 mg ammonium molybdate and 0.05 mL H₂SO₄ per analysis. The detection system does not suffer from the interferences that are encountered in the photometric method such as colored substances, colloids, metal ions, silicate and refractive index effect (Schlieren effect). The results obtained by the column extraction procedure were well correlated with those obtained by the steady-state extraction procedure, but showed slightly higher extraction efficiency.     

Imidazolinone herbicides in strongly acidic media: Speciation and electroreduction

From UV-visible measurements and potentiometric titrations it follows that the lowest pK values (pK₁) of imidazolinone herbicides correspond to the simultaneous protonation/dissociation equilibria of both the pyridinic (or quinolinic) nitrogen and the carboxyl group, the following pK (pK₂) to the imminium nitrogen and the basic pK (pK₃) to the dissociation of the imido nitrogen. Below pH 6 and down to pH c.a. 2.5, the dominant form of the herbicide is a double ion having both positive and negative charges, this being important in discussing the effect of pH in the natural dynamics of imidazolinone herbicides, especially in their soil sorption. Electrochemical studies of the reduction of the herbicides were made on mercury and carbon electrodes in strongly acidic media (0.1 to 2.7 M H₂SO₄) as well up to pH 7. The reduction signals were all attributed to the reduction of the imidazolinone ring except the second peak/wave that was found to have originated by the reduction of the pyridine/quinoline ring. A signal observed in strongly acidic media and at highly negative overpotentials was attributed to the reduction of the imidazolinone ring of the product of the previous reduction in a process consisting of two reversible electron transfers followed by a protonation reaction.