High-throughput approach for analysis of multicomponent gas chromatographic–mass spectrometric signals

Hyphenated techniques such as gas chromatography–mass spectrometry (GC–MS) or high-performance liquid chromatography–mass spectrometry (LC–MS) produce a large amount of data in a form of two-way data matrix. It has been a great challenge to furthest extract the useful information from the data. In this work, a chemometric approach based on a modification of adaptive immune algorithm (AIA) was proposed for a high-throughput analysis of the multicomponent overlapping GC–MS signals. With the proposed method, the chromatographic profile of each component in an overlapping signal can be extracted independently and sequentially along the retention time. In order to show the efficiency of the method, a stimulated GC–MS data of six components with background and an experimental GC–MS data of 40 pesticides were investigated. It was found that the multicomponent overlapping GC–MS signals could be fast and accurately resolved. Furthermore, the quantitative property of the extracted information was also investigated. The correlation coefficients (r) between the peak area and the added volumes of the sample are in the range 0.9658–0.9953.     

Gas chromatographic–mass spectrometric methodology using solid-phase microextraction for the multiresidue determination of pesticides in surface waters

Solid-phase microextraction (SPME) coupled with gas chromatography–mass spectrometry (GC–MS) and selected ion monitoring (SIM) was used for the analytical determination of priority pesticide residues. Fibers coated with a 65-µm film thickness of polydimethylsiloxane divinylbenzene (PDMS-DVB) were used to extract 31 pesticides of different chemical groups. The quality parameters of the method demonstrated a good precision with detection limits of 1–56?ng/L. Linearity was controlled in the range of 0.1–50?µg/L. The proposed method was applied for the trace-level determination of the target pesticides in surface water samples including three rivers and one lake at the Epirus region (north-west Greece) for a period of one year. The results demonstrate the suitability of the SPME–GC–MS approach for the analysis of multi-residue pesticides in environmental water samples.     

Determination of multiclass pesticides in river sediments via matrix solid-phase dispersion extraction and gas chromatography–tandem mass spectrometry

A fast and environment-friendly analytical method was implemented to determine multiclass pesticides in river sediments. Twenty-three pesticides—organochlorine pesticides, organophosphorus pesticides, and triazines—were extracted via matrix solid-phase dispersion (MSPD) and analyzed by gas chromatography–tandem mass spectrometry (GC–MS/MS). Florisil demonstrated excellent analytes uptake capability as the extractant phase, with suitable selectivity for treating complex sediment samples. Under defined extraction conditions, the MSPD–GC–MS/MS method demonstrated robustness in the n inter-day analysis of sediments from different sources, providing limit of quantifications (LOQs) between 5 and 15 ng/g, linear responses in the range between LOQs and 150 ng/g, extraction recoveries of 71%–106%, and precision, assessed as relative standard deviation below 20%. The MSPD significantly reduced samples and solvents’ consumption, providing critical environmental gains compared to traditional extraction methods like Soxhlet. Finally, the method was applied to analyze sediment samples from three different collection areas of the Subachoque River (Cundinamarca, Colombia), demonstrating a fast, efficient, confident, and profitable analytical tool for pollution control and monitoring in environmental samples. The method allowed us to determine the current use in Colombia of banned pesticides under the 2001 Stockholm Convention.     

Development of a stir-bar-sorptive extraction–liquid desorption–large-volume injection capillary gas chromatographic–mass spectrometric method for pyrethroid pesticides in water samples

Stir-bar-sorptive extraction followed by liquid desorption and large-volume injection capillary gas chromatography with mass spectrometric detection (SBSE–LD–LVI-GC–MS), had been applied for the determination of ultra-traces of eight pyrethroid pesticides (acrinathrin, cypermethrin, deltamethrin, esfenvalerate, fenpropathrin, fenvalerate, and permethrin cis and trans isomers) in water samples. Instrumental calibration for selected-ion monitoring acquisition and conditions that could affect the SBSE–LD efficiency are fully discussed. By performing systematic assays on 30-mL water samples spiked at the 0.10 g L^–1 level it was established that stir-bars coated with 47 L polydimethylsiloxane, an equilibrium time of 60 min (750 rpm), 5% methanol as organic modifier, and acetonitrile as back-extraction solvent, provided the best analytical performance to monitor pyrethroid pesticides in water matrices. Good accuracy (81.8–105.0%) and remarkable reproducibility (<11.7%) were obtained, and the experimental recovery data were in good agreement with the theoretical equilibrium described by octanol–water partition coefficients (log K_O/W), with the exception of acrinathrin for which lower yields were measured. Excellent linear dynamic ranges between 25 and 400 ng L^–1 (r²>0.994), low quantification (3.0–7.5 ng L^–1) and detection (1.0–2.5 ng L^–1) limits were also achieved for the eight pyrethroid pesticides studied. The method was successfully used for analysis of tapwater and groundwater matrices spiked at the 0.10 g L^–1, revealing the suitability of the method for determination of pyrethroid pesticides in real samples. The method was shown be reliable and sensitive and a small volume of sample was required to monitor pyrethroids at ultra-trace levels, in compliance with international regulatory directives on water quality.     

Flow injection solid-phase extraction using multi-walled carbon nanotubes packed micro-column for the determination of polycyclic aromatic hydrocarbons in water by gas chromatography–mass spectrometry

A flow injection solid-phase extraction preconcentration system using a multi-walled carbon nanotubes (MWCNTs) packed micro-column was developed for the determination of 16 polycyclic aromatic hydrocarbons (PAHs) in water by gas chromatography–mass spectrometry (GC–MS). The preconcentration of PAHs on the MWCNTs was carried out based on the adsorption retention of analytes by on-line introducing the sample into the micro-column system. Methanol was introduced to elute the retained analytes for GC–MS analysis using selected ion monitoring (SIM) mode. Important influence factors were studied in detail, such as sample acidity, sample flow rate, eluent flow rate and volume, dimensions of MWCNTs and amounts of packing material. Limits of detection of 16 PAHs for an extraction of 50 mL water sample were in the range of 0.001–0.15 μg L⁻¹, and the precisions (RSD) were in the range of 4–14%. The optimized method was successfully applied to the determination of 16 PAHs in surface waters, with recoveries in the range of 72–93% for real spiked sample.     

Targeting prohibited substances in doping control blood samples by means of chromatographic–mass spectrometric methods

Urine samples have been the predominant matrix for doping controls for several decades. However, owing to the complementary information provided by blood (as well as serum or plasma and dried blood spots (DBS)), the benefits of its analysis have resulted in continuously increasing appreciation by anti-doping authorities. On the one hand, blood samples allow for the detection of various different methods of blood doping and the abuse of erythropoiesis-stimulating agents (ESAs) via the Athlete Biological Passport; on the other hand, targeted and non-targeted drug detection by means of chromatographic–mass spectrometric methods represents an important tool to increase doping control frequencies out-of-competition and to determine drug concentrations particularly in in-competition scenarios. Moreover, blood analysis seldom requires in-depth knowledge of drug metabolism, and the intact substance rather than potentially unknown or assumed metabolic products can be targeted. In this review, the recent developments in human sports drug testing concerning mass spectrometry-based techniques for qualitative and quantitative analyses of therapeutics and emerging drug candidates are summarized and reviewed. The analytical methods include both low and high molecular mass compounds (e.g., anabolic agents, stimulants, metabolic modulators, peptide hormones, and small interfering RNA (siRNA)) determined from serum, plasma, and DBS using state-of-the-art instrumentation such as liquid chromatography (LC)–high resolution/high accuracy (tandem) mass spectrometry (LC-HRMS), LC–low resolution tandem mass spectrometry (LC-MS/MS), and gas chromatography–mass spectrometry (GC-MS).     

Application of ethyl chloroformate derivatization for solid-phase microextraction–gas chromatography–mass spectrometric determination of bisphenol-A in water and milk samples

A simple and rapid analytical method based on in-matrix ethyl chloroformate (ECF) derivatization has been developed for the quantitative determination of bisphenol-A (BPA) in milk and water samples. The samples containing BPA were derivatised with ECF in the presence of pyridine for 20 s at room temperature, and the non-polar derivative thus formed was extracted using polydimethylsiloxane solid-phase microextraction (SPME) fibres with thicknesses of 100 μm followed by analysis using gas chromatography–mass spectrometry. Three alkyl chloroformates (methyl, ethyl and isobutyl chloroformate) were tested for optimum derivatisation yields, and ECF has been found to be optimum for the derivatisation of BPA. Several parameters such as amount of ECF, pyridine and reaction time as well as SPME parameters were studied and optimised in the present work. The limit of detection for BPA in milk and water samples was found to be 0.1 and 0.01 μg L⁻¹, respectively, with a signal-to-noise ratio of 3:1. The limit of quantitation for BPA in milk and water was found to be 0.38 and 0.052 μg L⁻¹, respectively, with a signal-to-noise ratio of 10:1. In conclusion, the method developed was found to be rapid, reliable and cost-effective in comparison to silylation and highly suitable for the routine analysis of BPA by various food and environmental laboratories.     

Analysis of pesticide residues in essential oils of citrus fruit by GC–MS and HPLC–MS after solid-phase extraction

A robust reliable method for the analysis of residues of pesticides in citrus groves was developed. Residues of twelve pesticides were extracted from citrus essential oils by SPE, separated by liquid chromatography and analyzed by GC-MS. In addition, ten pesticides were extracted by SPE, separated and analyzed by electrospray HPLC-MS. In the case of lemon essential oils, all twenty residues were separated by liquid/solid extraction on a mixed Florisil-C(18) cartridge. The method enabled the analysis of the twenty pesticide residues at levels of 2 to 30 ppm with limits of detection ranging between 0.02 to 0.50 mg L(-1).     

Liquid chromatographic–electrospray mass spectrometric determination of cyclosporin A in human plasma

A rapid, sensitive and selective liquid chromatography–mass spectrometry (LC–MS) assay has been developed for determination of cyclosporin A (CyA) in human plasma; cyclosporin B (CyB) was used as internal standard (IS). The method utilized a combination of a column-switching valve and a reversed-phase symmetry column. The mobile phase was a 25:75 (v/v) mixture of 10% aqueous glacial acetic acid and acetonitrile. Running time per single run was less than 10 min. Sample preparation included C₈ SPE of human plasma spiked with the analyte and internal standard, evaporation of the eluate to dryness at 50°C under N₂ gas, and finally reconstitution in the mobile phase. Detection of cyclosporin A and the IS was performed in selected ion-monitoring mode at m/z 601.3 and 594.4 Da for CyA and IS, respectively. Quantitation was achieved by use of the regression equation of relative peak area of cyclosporin to IS against concentration of cyclosporin. The method was validated according to FDA guideline requirements. The linearity of the assay in the range 5.0–400.0 ng mL^–1 was verified as characterized by the least-squares regression line Y=(0.00268±1.9×10^–4)X+(0.00078±1.8×10^–3), correlation coefficient, r=0.9986±1.1×10^–3 (n=48). Intra and inter-day quality-control measurements in the range 5.0–350.0 ng mL^–1 revealed almost 100% accuracy and 9% CV for precision. The mean absolute recovery of CyA was found to be 84.01±9.9% and the respective relative recovery was 100.3±9.19. The limit of quantitation (LOQ) achieved was 5 ng mL^–1. Eventually, stability testing of the analyte and IS in plasma or stock solution revealed that both chemicals were very stable when stored for long or short periods of time at room temperature or –20°C.     

Pipette tip solid-phase extraction and gas chromatography – mass spectrometry for the determination of methamphetamine and amphetamine in human whole blood

Methamphetamine and amphetamine were extracted from human whole blood samples using pipette tip solid-phase extraction (SPE) with MonoTip C₁₈ tips, on which C₁₈-bonded monolithic silica gel was fixed. Human whole blood (0.1 mL) containing methamphetamine and amphetamine, with N-methylbenzylamine as an internal standard, was mixed with 0.4 mL of distilled water and 50 μL of 5 M sodium hydroxide solution. After centrifugation, the supernatant was extracted to the C₁₈ phase of the tip (pipette tip volume, 200 μL) by 25 repeated aspirating/dispensing cycles using a manual micropipettor. Analytes retained in the C₁₈ phase were eluted with methanol by five repeated aspirating/dispensing cycles. After derivatization with trifluoroacetic anhydride, analytes were measured by gas chromatography – mass spectrometry with selected ion monitoring in the positive-ion electron impact mode. Recoveries of methamphetamine and amphetamine spiked into whole blood were more than 87.6 and 81.7%, respectively. Regression equations for methamphetamine and amphetamine showed excellent linearity in the range of 0.5–100 ng/0.1 mL. The limits of detection for methamphetamine and amphetamine were 0.15 and 0.11 ng/0.1 mL, respectively. Intra- and interday coefficients of variation for both stimulants were not greater than 9.6 and 13.8%, respectively. The determination of methamphetamine and amphetamine in autopsy whole blood samples is presented, and was shown to validate the present methodology.     

Identification of dissolved organic species in non-drinking tap water by solid-phase extraction and gas chromatography–mass spectrometry

A method is presented for qualitative identification of dissolved volatile organic compounds (VOCs) in non-drinking tap water samples based on applications of both solid-phase extraction (SPE) and gas chromatography–mass spectrometric (GC–MS) techniques. Water samples were collected and passed over a micro-column packed with acid treated active silica gel phase (pH = 2.6) for adsorption of dissolved organic species under this pH-condition. Silica-bound-organics were then divided into equal portions followed by suspension into organic solvents of different polarities such as methanol, ethanol, butan-1-ol, ethyl acetate, diethyl ether and chloroform. These suspensions were then automatically shaken for 1 h at room temperature. The organic extracts were subjected to GC–MS analysis under temperature programming conditions. The mass spectrum of each eluted chromatographic peak was library searched or manually interpreted to identify the correct name and structure. Blank solvent and silica samples were also subjected to the same GC–MS analysis for comparison.     

Multi-walled carbon nanotubes–dispersive solid-phase extraction combined with nano-liquid chromatography for the analysis of pesticides in water samples

In this work, the simultaneous separation of a group of 12 pesticides (carbaryl, fensulfothion, mecoprop, fenamiphos, haloxyfop, diclofop, fipronil, profenofos, fonofos, disulfoton, nitrofen, and terbufos) by nano-liquid chromatography with UV detection is described. For the analyses, a 100 μm internal diameter capillary column packed with silica modified with phenyl groups was used. Experimental parameters, including the use of a trapping column for increasing the sensitivity, were optimized and validated. A preliminary study of the applicability of a rapid and practical dispersive solid-phase extraction (DSPE) procedure was developed for the extraction of some of these pesticides (carbaryl, fensulfothion, fenamiphos, fipronil, profenofos, fonofos, disulfoton, nitrofen, and terbufos) from Milli-Q water samples using multi-walled carbon nanotubes (MWCNTs). The method was validated through a recovery study at three different levels of concentration, obtaining limits of detection in the range 0.016–0.067 μg/L (below European Union maximum residue limits) for the majority of the pesticides. In this work, MWCNTs were reused up to five times, representing an important reduction of the waste of stationary phase. Furthermore, DSPE permitted a clear diminution of the total sample treatment time with respect to conventional SPE.     

Multidimensional gas chromatography–mass spectrometry determination of 3-alkyl-2-methoxypyrazines in wine and must. A comparison of solid-phase extraction and headspace solid-phase extraction methods

Two different strategies for the quantitative determination of 3-alkyl-2-methoxypyrazines in wine and must have been developed and validated. Comparison between both the techniques has been presented and the most adequate has been applied to the determination of these compounds in different samples of wine, made from several varieties of grapes, and also in different samples of must made from Cabernet Sauvignon grapes. Both the methods consisted of a dynamic headspace coupled with a solid-phase extraction (HS–SPE) and solid-phase extraction (SPE) directly from the sample, coupled with multidimensional gas chromatography–mass spectrometry system (MDGC–MS). Both of them require resins LiChrolut EN, and analyte elution has been carried out with dichloromethane. The repeatability of both methodologies was evaluated at two concentration levels. The relative standard deviations (RSD%) were acceptable in every case, but smaller when working with HS–SPE. The recoveries obtained for the three analytes with the two methodologies were almost 100%, with the exception of IBMP, which had a recovery of only 70% with HS–SPE. The linearity was satisfactory with both methods for the range of occurrence of methoxypyrazines in wine and must. The limits of detection of the direct SPE technique were much lower than those of HS–SPE in every case. Direct SPE method detection limits ranged from 0.09 to 0.15 ng L⁻¹. The method based on direct SPE was chosen finally because it had better detection limits and was easier and quicker than the HS–SPE-based method. It has been applied to the determination of these components in 36 wine and 17 musts samples. The quantitative results suggest that the Spanish wines show meaningless amounts of these compounds. IBMP has been found just in between 1.9 and 15 ng L⁻¹.     

Monitoring chlorophenols in industrial effluents by solid-phase microextraction–gas chromatography–mass spectrometry

A method for the determination of 19 chlorophenols in industrial effluents samples using solid-phase microextraction (SPME) coupled to gas chromatography–mass spectrometry has been developed. Four kinds of different SPME fibres have been studied. Among them, the polyacrylate and carbowax®-divinylbenzene fibres were the most adequate. The extraction process was optimized by means of the experimental design, which allows the study of a large number of factors with a reasonable number of experiments. The optimized method allows the determination of the studied chlorophenols in complex matrices with a high organic content with detection limits down to 0.07?ng?mL^?1 and RSD ranging from 4.4% to 13.8%. The recovery studies with spiked real effluent samples at low levels of chlorophenols ranged from 59.8% to 142.1% for the lowest level (0.5?ng?mL^?1) and from 79.6% to 115.8% for the highest spiked level (2?ng?mL^?1). These results show the suitability of the proposed method to monitor chlorophenols in complex samples. 2,4,5-TCP was detected at concentrations close to its limits of detection in effluents coming from an oil refinery.     

Determination of fecal sterols by gas chromatography–mass spectrometry with solid-phase extraction and injection-port derivatization

Injection-port derivatization combined with solid-phase extraction (SPE) was developed and applied for the first time to determine five types of fecal sterols (coprostanol, cholestanol, epicholestanol, epicoprostanol and cholesterol) with gas chromatography–mass spectrometry (GC–MS). In this method, silylation of fecal sterols was performed with N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA) at GC injection-port. The factors influential to this technique such as injection-port temperature, purge-off time, derivatization reagent (BSTFA) volume, and the type of organic solvent were investigated. In addition, the conditions of SPE (including the type of SPE cartridge, the type of elution organic solvent) were also studied. After SPE followed by injection-port silylation by GC–MS, good linearity of analytes was achieved in the range of 0.02–10 ng/mL with coefficients of determination, R² > 0.995. Good reproducibility was obtained with relative standard deviation less than 19.6%. The limits of detection ranged from 1.3 ng/mL to 15 ng/mL (S/N = 3) in environmental water samples. Compared with traditional off-line silylation of fecal sterols performed with water bath (60 °C, 30 min), this injection-port silylation method is much simpler and convenient. The developed method has been successfully applied for the analysis of fecal sterols from real environmental water samples.     

Trace analysis of benzophenone-derived compounds in surface waters and sediments using solid-phase extraction and microwave-assisted extraction followed by gas chromatography–mass spectrometry

This study describes a procedure for determining eight benzophenone-derived compounds in surface waters and sediments. These include the pharmaceutical ketoprofen, its phototransformation products 3-ethylbenzophenone and 3-acetylbenzophenone, and five benzophenone-type ultraviolet (UV) filters. The proposed analytical method involves the pre-concentration of water samples by solid-phase extraction (SPE) and microwave-assisted extraction (MAE) of sediment samples followed by derivatization and analysis by gas chromatography–mass spectrometry. Different parameters were investigated to achieve optimal method performance. Recoveries of 91 to 96 % from water samples were obtained using HLB Oasis SPE cartridges, whereas MAE of sediments (30 min at 150 °C) gave recoveries of 80 to 99 %. Limits of detection were between 0.1 and 1.9 ng L^?1 for water samples and from 0.1 to 1.4 ng g^?1 for sediment samples. The developed method was applied to environmental samples and revealed the presence of UV filters in the majority of the surface waters with up to 690 ng L^?1 of 2-hydroxy-4-methoxybenzophenone. By contrast, ketoprofen (≤2,900 ng L^?1) and its degradation products (≤320 ng L^?1) were found in only two rivers, both receiving wastewater treatment plant effluents. Sediment analysis revealed benzophenone to be present in concentrations up to 650 ng g^?1, whereas concentrations of other compounds were considerably lower (≤32 ng L^?1). For the first time, quantifiable amounts of two ketoprofen transformation products in the aqueous environment are reported.     

Development of a screening method to determine the pattern of fermentation metabolites in faecal samples using on-line purge-and-trap gas chromatographic–mass spectrometric analysis

An on-line screening method to analyse volatile organic compounds (VOCs) in faecal samples was developed. VOCs were isolated from a standard solution or faecal samples using a purge-and-trap system and identified and quantified by GC–MS. The experimental conditions were optimised and the performance of the system was evaluated. Linear calibration curves were obtained with correlation coefficients of at least 0.992. RSDs within and between days were less than 10%. The method was successfully applied to the analysis of faecal samples, yielding 135 different volatile organic compounds identified in 11 faecal samples. Of those, 22 VOCs were found in all volunteers, whereas 34 VOCs were person-specific.     

The development of a gas chromatographic–mass spectrometric analytical procedure for the determination of lipids,proteins and resins in the same paint micro-sample avoiding interferences from inorganic media

This paper presents a GC–MS analytical procedure for determining proteinaceous materials, glycerolipids, natural waxes and terpenoid resins in the same paint micro-sample. The procedure is also reliable when high amounts of interfering inorganic pigments, dryers and charges are present. The characterisation of proteinaceous binders in a paint sample can be subject to analytical interferences by inorganic materials. Such materials may form complexes with functional groups of proteins, thus preventing their efficient derivatisation, which is necessary prior to GC analysis. For this reason an analytical procedure has been developed based on two extractions and a clean-up step, in order to obtain two fractions: a lipid-resinous fraction and a proteinaceous fraction. The lipid-resinous fraction is subjected to salification/saponification assisted by microwaves, followed by acidification, extraction, derivatisation and GC–MS analysis. The proteinaceous fraction is analysed by GC–MS after hydrolysis and derivatisation of the freed amino acids. The desalting step is applied before the hydrolysis, and is based on the use of the monolithic sorbent tip technology with a C4 stationary phase. Reference paint replicas of egg, casein and animal glue were prepared with and without several metals containing pigments, and used to develop and validate the analytical procedure. The procedure proved to be efficient in desalting the proteinaceous materials both from cations and anions. Although non quantitative, it is reliable in the analysis of samples whose content of extractable proteins is <1 μg, thus showing it to be suitable for the characterisation of paint samples. An example of how the analytical procedure was used to characterise a sample from a 15th century panel painting is also discussed.     

Determination of 16 polycyclic aromatic hydrocarbons in environmental water samples by solid-phase extraction using multi-walled carbon nanotubes as adsorbent coupled with gas chromatography–mass spectrometry

A solid-phase extraction (SPE) using multi-walled carbon nanotubes (MWCNTs) as adsorbent coupled with gas chromatography–mass spectrometry (GC–MS) method was developed for the determination of 16 polycyclic aromatic hydrocarbons (PAHs) in environmental water samples. Several condition parameters, such as extraction adsorbents, elution solvents and volumes, and sample loading flow rate and volume were optimized to obtain high SPE recoveries and extraction efficiency. 150 mg MWCNTs as sorbent presented high extraction efficiency of 16 PAHs due to the large specific surface area and high adsorption capacity of MWCNTs compared with the commercial C18 column (250 mg/2 mL). The calibration curves of 16 PAHs extracted were linear in the range of 20–5000 ng L⁻¹, with the correlation coefficients (r²) between 0.9848 and 0.9991. The method attained good precisions (relative standard deviation, RSD) from 1.2% to 12.1% for standard PAHs aqueous solutions; method recoveries ranged in 76.0–125.5%, 74.5–127.0%, and 70.0–122.0% for real spiked samples from river water, tap water and seawater, respectively. Limits of detection (LODs, S/N = 3) of the method were determined from 2.0 to 8.5 ng L⁻¹. The optimized method was successfully applied to the determination of 16 PAHs in real environmental water samples.     

Dispersive solid-phase extraction followed by liquid chromatography–tandem mass spectrometry for the multi-residue analysis of pesticides in raw bovine milk

A fast multi-residue method based on dispersive solid-phase extraction (DSPE) followed by liquid chromatography–tandem mass spectrometry was developed for the simultaneous determination of 44 pesticides in raw bovine milk. Raw bovine milk samples did not percolate through SPE cartridges usually applied for pesticide extraction from homogenized pasteurized milk samples. Therefore, a DSPE technique was implemented and validated for the first time in this work. Graphitized non-porous carbon and C18 modified silica materials were tested both in combination with magnesium sulfate and bonded silica with ethylenediamine-N-propyl phase. The efficiency of the DSPE process was studied at several concentration levels obtaining the higher recoveries with C18 material. The method performance was also assessed and the limits of quantification reached the ng g⁻¹ level, complying with the most recent maximum residue levels. The DSPE method was also shown to be suited to both the fatty and skimmed fractions issued from raw milk. Finally, the extraction method was successfully applied to the analysis of raw milk samples collected in 23 farms of dairy cattle from NW Spain (Galicia).