Development and validation of a reversed-phase liquid chromatographic method for analysis of demeclocycline and related impurities

A simple, robust, and rapid reversedphase high-performance liquid chromatographic method for the analysis of demeclocycline and its impurities is described. Chromatographic separations were achieved on a Symmetry Shield RP8 (75 mm × 4.6 mm, 3.5 μm) column kept at 40°C. The mobile phase was a gradient mixture of acetonitrile, 0.06 M sodium edetate (pH 7.5), 0.06 M tetrapropylammonium hydrogen sulphate (pH 7.5) and water, A (2:35:35:28 v/v/v/v) and B (30:35:35:0 v/v/v/v) pumped at a flow rate of 1 mL/min. UV detection was performed at 280 nm. The developed method was validated according to the ICH guidelines for specificity, limit of detection, limit of quantification, linearity, precision, and robustness. An experimental design was applied for robustness study. Results show that the peak shape, chromatographic resolution between the impurities, and the total analysis time are satisfactory and better than previous methods. The method has been applied for the analysis of commercial demeclocycline bulk samples available on the market.     

Development and validation of a reverse-phase liquid chromatographic method for assay and related substances of abacavir sulfate

A simple isocratic liquid chromatographic method was developed for the determination of abacavir from its related substances and assay for the first time. This method involves the usage of C18 (Intertsil octadecyl silane-3V, 150 mm x 4.6 mm, 5 microm) column. The method was validated over the range of 0.002-0.1 mg/mL for chloro impurity, 0.005-0.1 mg/mL for amino impurity and pyrimidine impurity, and 0.005-0.2 mg/mL for abacavir. The mobile phase consists of a mixture of 10 mM ammonium acetate buffer and ACN in the ratio of 90:10. The flow rate was set at 1.0 mL/min with UV detection monitored at 214 nm. The drug substance was subjected to stress conditions of hydrolysis, oxidation, photolysis, and thermal degradation. The developed method was validated for linearity, range, precision, accuracy, and specificity. This method can be conveniently used in a quality control laboratory for routine analysis of both related substances and assay.     

Development and validation of an improved liquid chromatographic method for the analysis of dirithromycin

The official method for the determination of dirithromycin and related substances in the European Pharmacopoeia (Ph. Eur.) and in the United States Pharmacopeia (USP) is an isocratic liquid chromatographic (LC) method using an ODS column. With this method, the separation of the main component dirithromycin from its epimer is not complete. Moreover, this method suffers sometimes from drift of the baseline and from subsequent quantitation problems. The required resolution is not easy to obtain.

Using an adapted method derived from the one prescribed in the pharmacopoeias, the selectivity of a set of more than 40 reversed-phase columns towards dirithromycin components was investigated. The selection of the most suitable column was achieved by the chromatographic response function (CRF) approach. Several changes were introduced to the method in order to improve the separation and to overcome the baseline drift problem. The resulting method uses a Zorbax Extend column maintained at 30 °C and a mobile phase containing acetonitrile, methanol, 2-propanol, water and a phosphate buffer at pH 7.5. The method allows a good separation of dirithromycin components, which is much better than that obtained with the existing methods. Several impurities of unknown identity are also separated. The method shows good repeatability, linearity and sensitivity, and it is robust. In addition, it proved to be applicable to a wide number of C18 reversed-phase columns.     

Development and validation of a reversed-phase ultra-performance liquid chromatographic method for assay of lacidipine and related substances

A simple isocratic, RP-ultra-performance LC method was developed and validated for the determination of lacidipine, three process impurities formed during synthesis, and three degradation products present in drug substance and the drug product. An efficient chromatographic separation was achieved on an Acquity BEH C18 column using pH 4.5 ammonium acetate-acetic acid buffer-methanol (70 + 30, v/v) mobile phase. The monitoring wavelength was 240 nm, and the flow rate 0.25 mL/min. Forced degradation studies using acid, alkali, peroxide, water, heat, and light were conducted, and all impurities were separated. The method was validated successfully for specificity, precision, linearity, accuracy, LOD, LOQ, and robustness, according to International Conference on Harmonization guidelines. The linearity of the calibration curve for lacidipine and each impurity was found to be very good (r2 > 0.999). This method is shown to be suitable for analysis of lacidipine to evaluate the quality of drug substance and a drug product.     

An improved liquid chromatographic method for the analysis of tylosin and its impurities

A selective reversed-phase (RP) liquid chromatographic (LC) method coupled with UV for the determination of tylosin and its related substances is described. The gradient method uses a Capcell pak C18 ACR column (25 cm×4.6 mm id, 5 μm) maintained at a temperature of 60°C. The mobile phases consist of acetonitrile, phosphate buffer pH 5.5 and water: (A; 27.5:10:62.5 v/v/v) and (B; 50:10:40 v/v/v). The flow rate is 1.0 mL/min and UV detection is performed at 280 nm. It allows the separation of all known and 22 other unknown related substances (≥0.02%) from the main compound and from one another. The method shows good precision, sensitivity, linearity (between 0.2 μg/mL and 1.25 mg/mL) and robustness. The limit of quantification is 0.2 μg/mL, corresponding to 0.020%. Seven bulk tylosin samples containing a large number of impurities were examined using this method.     

Isocratic liquid chromatographic method for the analysis of azithromycin and its structurally related substances in bulk samples

An isocratic liquid chromatographic method with UV detection at 215 nm, which is suitable for the analysis of azithromycin (AZT) in bulk samples, is described. AZT is separated from its synthesis intermediates and a degradation product as well as from six unknown impurities on an XTerra RP18 column at 70 degrees C using a mobile phase consisting of acetonitrile-pH 6.5 0.2M K2HPO4-water (35:10:55, v/v/v) at 1.0 mL/min. The XTerra stationary phase contains methyl groups that are incorporated in the bulk structure of the material. This allows for special selectivities. Robustness is evaluated by a full factorial design experiment. The method shows good selectivity, repeatability, linearity, and sensitivity.     

Development and validation of a stability-indicating LC method for simultaneous determination of related compounds of guaifenesin,terbutaline sulfate and ambroxol HCl in cough syrup formulation

A new liquid chromatographic method has been developed and validated for the determination of terbutaline sulfate (TLS), guaifenesin (GFN) and ambroxol HCl (AML), for its potential impurities in drug substances and drug products. Efficient chromatographic separation was achieved on X-Terra RP-18 column with a simple mobile phase combination containing a gradient mixture of solvents A and B at a flow rate of 1.0 mL min⁻¹ and quantitation was carried out using ultraviolet detection at 222 nm with column temperature of 35 °C. The resolution between TLS, GFN and AML, its associated impurities was found to be greater than 1.5. Regression analysis shows an r value (correlation coefficient) greater than 0.998. This method was capable to detect all the process impurities of TLS, GFN and AML, at a level below 0.015% with respect to a test concentration of 0.125, 5.0 and 1.5 mg mL⁻¹, respectively. The % RSD for the inter-day and intra-day precisions for all the impurities of TLS, GFN and AML were found to be less than 3.0. The method has shown good, consistent recoveries. The drugs were subjected to stress conditions of acid, base, water hydrolysis, oxidation, photolysis and thermal degradation, as prescribed by international conference on harmonization (ICH).     

Retention modelling in liquid chromatographic separation of simvastatin and six impurities using a microemulsion as eluent

A novel and unique approach was used for retention modelling in the separation of simvastatin and six impurities by liquid chromatographic using a microemulsion as mobile phase. A microemulsion is a modification of a micellar system where a lipophilic organic solvent is dissolved in the micelles; for that reason, microemulsions are usually treated as solvent-modified micellar solutions. When microemulsions are used as eluents in HPLC separations, solutes partition between the charged oil droplets and the aqueous buffer phase. The complexity of the composition of the microemulsion permits extensive manipulations to be made during method development in order to achieve acceptable resolution of such a complex mixture of substances. In order to avoid a laborious "trial and error" procedure, a 2(3) full factorial design was applied for choosing an optimal microemulsion composition to obtain good separation in a reasonable run time. Organic solvent, sodium dodecyl sulphate, and n-butanol content were varied within defined experimental domain. Optimal conditions for the separation of simvastatin and its six impurities were obtained using an X Terra 50 x 4.6 mm, 3.5 microm particle size column at 30 degrees C. The mobile phase consisted of 0.9% w/w of diisopropyl ether, 2.2% w/w of sodium dodecylsulphate (SDS), 7.0% w/w of co-surfactant such as n-butanol, and 89.9% w/w of aqueous 25 mM disodium phosphate pH 7.0.     

Development and validation of an improved reversed‐phase liquid chromatographic method combined with pulsed electrochemical detection for the analysis of netilmicin

Netilmicin is one of the aminoglycoside antibiotics that lacks a strong UV absorbing chromophore. However, the application of pulsed electrochemical detection has been used successfully for the direct analysis of aminoglycoside antibiotics. This study describes an improved LC method combined with pulsed electrochemical detection for the analysis of netilmicin. Using a Zorbax SB C‐18 column (250 mm×4.6 mm id, 5 μm), isocratic elution was carried out with a mobile phase containing sodium sulfate (20 g/L), sodium octanesulfonate (0.3 g/L), THF (20 mL/L), and 0.2 M phosphate buffer pH 3.0 (50.0 mL/L). The robustness of the method was examined by means of an experimental design. The method proved to be sensitive, repeatable, linear, and robust. The method has also been used to analyze some commercial netilmicin samples.     

Development and validation of an improved liquid chromatographic method for the analysis of oxytetracycline

Summary An improved LC method is described for the separation of oxytetracycline and its impurities. The separation is much better than that obtained with official pharmacopoeia methods. The method uses XTerra RP-18, 5 μm (25cm×4.6 mm I.D.), a silica-based stationary phase with methyl end-capping, claimed to reduce silanol activity. The column temperature is set at 30°C and a UV detection is performed at 280 nm. Mobile phase containing acetonitrile −0.25 M tetrabutylammonium hydrogen sulfate pH 7.5−0.25 M ethylenediaminetetraacetic acid pH 7.5-water (115:360:160:365,v/v/v/v) is used at a flow rate of 1.0 mL.min⁻¹, to separate the impurities present in oxytetracycline base. A central composite experimental design is used to optimize the separation. A second isocratic method with higher content of acetonitrile is needed to separate the more retained impurities present only in oxytetracycline hydrochloride. The method is robust and shows good selectivity, repeatability, linearity and sensitivity.     

Development of a validated liquid chromatographic method for the determination of related substances and assay of tenofovir disoproxil fumarate

The present study describes the development and validation of a selective liquid chromatographic (LC) method for the analysis of tenofovir disoproxil fumarate (TDF) and its related substances. The gradient method uses a base deactivated C18 column (Hypersil BDS column; 25 cm×4.6 mm I.D.) maintained at a temperature of 30°C. The mobile phases consist of acetonitrile, tetrabutylammonium/phosphate buffer pH 6.0 and water: (A; 2:20:78 v/v/v) and (B; 65:20:15 v/v/v). The flow rate is 1.0 mL/min and UV detection is performed at 260 nm. Good separation of TDF and 21 impurities was achieved. A system suitability test (SST) to check the quality of separation is also specified. The developed method was further validated with respect to robustness, precision, sensitivity and linearity. The method is proved to be robust, precise, sensitive and linear between 0.1 μg/mL and 0.15 mg/mL. The limit of detection and limit of quantification are 0.03 and 0.1 μg/mL, respectively. The method was successfully applied to the quantification of related substances and assay of commercial TDF samples (bulk substances and tablets).     

Development and validation of a liquid chromatographic method for fexofenadine hydrochloride in capsules

This paper describes the development and validation of a new, simple, fast, and sensitive liquid chromatographic method for the determination of the antihistamine fexofenadine. Although widely used in the treatment of allergic diseases, fexofenadine is not listed in any pharmacopeia, and there are few methods in the literature for its quantitation in pharmaceutical dosage forms. In this work, a LiChrospher 100 RP-18 (250 x 4.0 mm, 5 microm) column was used as the stationary phase, and acetonitrile-5mM ammonium acetate buffer (50 + 50, v/v) at pH 3.2 was the mobile phase. Through the evaluation of the analytical parameters, it was shown that the method is linear (r = 0.9999) at concentrations ranging from 20.0 to 80.0 microg/mL, precise (intraday relative standard deviation [RSD] values = 0.85, 0.40, and 0.81%; interday RSD = 0.77%), accurate (mean recovery = 99.05%), specific, and robust. The detection and quantitation limits are 0.3409 and 1.033 microg/mL, respectively. These low values show the good sensitivity of the proposed method.     

Development and validation of a stability-indicating liquid chromatographic method for determination of emtricitabine and related impurities in drug substance

A novel stability-indicating high-performance liquid chromatographic (HPLC) method was developed and validated for assay and determination of impurities of emtricitabine in drug substance. Emtricitabine was found to be degraded under acidic, alkaline, and oxidative stress conditions and to be more labile under oxidative conditions. The drug proved to be stable to dry heat and photolytic degradation. Resolution of major and minor degradation impurities was achieved on an Intersil ODS-3V column utilizing 10 mM sodium phosphate buffer and methanol (85:15) as mobile phase. Detection was at 280 nm. Validation studies were performed as per ICH recommended conditions. The developed method was found to be linear, accurate, specific, selective, precise, and robust.     

Development and validation of an analytical method for metformin hydrochloride and its related compound (1-cyanoguanidine) in tablet formulations by HPLC-UV

A simple, and stability-indicating liquid chromatographic method was developed and validated for the analysis of metformin hydrochloride and its related compound (1-cyanoguanidine) in tablet formulations. Liquid chromatography with a UV detector at a wavelength of 232 nm using a Nova-Pak silica column was employed in this study. Isocratic elution was employed using a mixture of ammonium dihydrogen phosphate buffer and methanol (21:79, v/v). This new method was validated in accordance with USP requirements for new methods for assay determination, which include accuracy, precision, specificity, linearity and range. The current method demonstrates good linearity over the range of 0.01-0.03 mg mL⁻¹ of metformin hydrochloride. The accuracy of the method is 100.4%. The precision of this method reflected by relative standard deviation of replicates is 0.30%. Validation of the same method for 1-cyanoguanidine determination was also performed according to USP requirements for quantitative determination of impurities which include accuracy, precision, linearity and range, selectivity, and limit of quantification (LOQ). Low LOQ of 1-cyanoguanidine using this method enables the detection and quantification of this impurity at low concentration.     

高效液相色谱法测定硫酸伏拉帕沙原料药中杂质

建立了高效液相色谱法测定硫酸伏拉帕沙原料药中杂质的方法.采用ACE Excel C18(4.6 mmx 250 mm,5 pm)色谱柱;以pH 2.5的H3PO4溶液为流动相A,乙腈为流动相B,梯度洗脱;检测波长为260 nm;进样量为20 μL.结果表明,主成分与各杂质的分离度良好,各已知杂质在测定的范围内具有良好的...     

Analytical quality by design in the development of a cyclodextrin‐modified capillary electrophoresis method for the assay of metformin and its related substances

Quality by Design (QbD) is a new paradigm of quality to be applied to pharmaceutical products and processes, recently encouraged by International Conference on Harmonisation guidelines. In this paper QbD approach was applied to the development of a CE method for the simultaneous assay of metformin hydrochloride (MET) and its main impurities. QbD strategy was focused on electrophoretic process understanding, and the analytical method was thoroughly evaluated by applying risk assessment and chemometric tools. Method scouting allowed CD‐CZE based on the addition of carboxymethyl‐β‐CD to Britton‐Robinson acidic buffer to be chosen as operative mode. Seven critical process parameters (CPPs) were selected, related to capillary, injection, BGE and instrumental settings. The effect of the different levels of the CPPs on critical quality attributes (CQAs), e.g. critical resolution values and analysis time, was evaluated in a screening study. Response surface methodology led to draw contour plots and sweet spot plots. The definition of design space was accomplished by applying Monte‐Carlo simulations, thus identifying by risk of failure maps a multivariate zone where the CQAs fulfilled the requirements with a selected probability. Finally, a control strategy was designed and the method was applied to a real sample of MET tablets.     

Development and validation of a new high-performance liquid chromatographic method for the loperamid hydrochloride determination in drugs

A selective, precise and new high-performance liquid chromatographic method for the analysis of loperamid hydrochloride in pharmaceutical formulations was developed and validated. The mobile phase consisting buffer (sodium-octansulphonate, triethylamine and ammonium hydroxide) in water: acetonitriie (45: 55, v/v) (pH 3.2). The absorbance was monitored with a DAD detector at 226 nm. The flow rate was 1.5 cm³ min⁻¹. The linearity (r = 0.9947) and the recovery (98.58–100.42%) were found to be satisfactory. The detection and quantitation limits were found to be 0.95 and 3.12 μg cm⁻³. The results demonstrated that the procedure was accurate, precise and reproducible. It can be suitably applied for the estimation of lopera-mid hydrochloride in pharmaceutical formulations. The article is published in the original.     

Development and validation of a micellar electrokinetic capillary chromatography method for the determination of goserelin and related substances

An MEKC method for the analysis of goserelin and related substances has been developed using a combination of additives including CTAB, β‐CD, and sodium hexanesulfonate. For this assay, the running buffer (pH and additives) and separation conditions (voltage and temperature) were optimized. The optimized system was the following: 200 mM 6‐aminocaproic acid buffer (pH 4.2) supplemented with 175 mM CTAB, 3.0% w/v β‐CD, and 20 mM sodium hexanesulfonate; the voltage was 10 kV in reverse polarity mode, the temperature was 20°C, and UV detection was measured at 220 nm. The method was qualified by evaluating the specificity, precision, linearity, accuracy, LOD, and LOQ. According to validation experiments, the optimized method was specific, accurate, and repeatable and satisfied the requirements for the analysis of goserelin and related substances. Compared with the RP‐HPLC method, the MEKC method better solved the problem of overlapping impurity signals, and the migration time required was shorter. This method can be used for quality control and for the analysis of goserelin and its related substances.     

Development and validation of a stability-indicating ultra-high-performance liquid chromatography method for the estimation of ibrutinib and trace-level quantification of related substances using quality-by-design approach

A new ultra-high-performance liquid chromatography method was developed using quality-by-design principles for quantifying trace-level impurities of ibrutinib. The method utilized an ACQUITY UPLC BEH C18 column with a mobile phase consisting of equal parts of 0.02 M formic acid in water and 0.02 M formic acid in acetonitrile. The critical method parameters, including mobile phase pH, column temperature, and flow rate, were optimized using the design of experiments. Statistical analysis revealed the impact of these parameters on critical quality attributes. Perturbation and response surface plots illustrated the individual and interactive effects of the parameters. The optimal parameter levels were determined to be pH, 2.5; column temperature, 28°C; and flow rate, 0.55 mL/min. Confirmation experiments demonstrated the method's robustness, with the separation of impurities and unknown degradation products within a 5-min runtime. The optimized ultra-performance liquid chromatography method was validated according to ICH guidelines. The method exhibited linear response within the range of 0.025–100 μg/mL for ibrutinib and 0.0187–0.225 μg/mL for impurities (r² > 0.9995), with limits of detection/limits of quantification of 0.01/0.025 and 0.015/0.0187 for ibrutinib and four impurities, respectively. Recoveries for the drug and impurities ranged from 92.69 to 102.7%, and precision was below 2% and 8% relative standard deviation for ibrutinib and impurities, respectively.