Blends as a strategy towards tailored hydrolytic degradation of poly(?-caprolactone-co-d,l-lactide)-poly(ethylene glycol)-poly(?-caprolactone-co-d,l-lactide) co-polymers

Binary blends were prepared from poly(?-caprolactone) (PCL), and P(CL-co-d,l-lactic acid)-P(ethylene glycol)-P(CL-co-d,l-lactic acid) co-polymers, where the d,l-LA content in the side chains varied from 0 to 70 mol%. Blend discs were fabricated by melt-molding, and the effect of blend composition on hydrolytic degradation was studied. Variations in medium pH were monitored, and morphological changes were observed using scanning electron microscopy. Blending of these co-polymers was found to constitute a simple means by which intermediate rates of water absorption and mass loss were obtained, compared to those observed in pure co-polymer preparations. In one of the blends, prepared from the two components containing 70 or 0 mol% d,l-LA in the side chains and thereby exhibiting large differences in degradation rate, hydrolysis resulted in the formation of a porous material over time. Furthermore, all blend samples maintained their initial shape throughout the study. Such materials may be interesting for further investigations for applications in cellular therapy and controlled release.     

Structure-based study of antiamyloidogenic cyclic d,l-α-peptides

Protein misfolding and aggregation are the hallmarks of many devastating diseases. We have previously shown that cyclic d,l-α-peptide CP-2 reacts and stabilizes less toxic forms of amyloid β (Aβ), and protects the cells from Aβ-induced toxicity. Here, we performed extensive structure-based studies on CP-2 to elucidate the contribution of each residue to the total antiamyloidogenic activity and determine the interactions that are involved between CP-2 and Aβ. We showed that the hydrophobicity of CP-2 analogs correlates with their antiamyloidogenic potency, however, aromatic interactions are even more important for this activity. The antiamyloidogenic activity of CP-2 analogs also correlates with their ability to self-assemble, as shown by the critical micelle concentration measurements. The cell survival studies performed on rat pheochromocytoma PC-12 cells suggest that incorporation of an additional aromatic residue to the CP-2's sequence increases its protective effect against Aβ42-induced toxicity.     

New organotin(IV) complexes with l-Arginine, Nα-t-Boc-l-Arginine and l-Alanyl-l-Arginine: Synthesis, structural investigations and cytotoxic activity

Novel diorganotin(IV) derivatives of l-Arginine (HArg), N_α-(tert-Butoxycarbonyl)-l-Arginine (Boc-Arg-OH) and l-Ala-l-Arg (H₂Ala-Arg), H₂NC(NH)NH(CH₂)₃CH(NHR′)CO₂H, where R′ = H in HArg, R′ = C(O)OC(CH₃)₃ in Boc-Arg-OH, R′ = H₂NCH(CH₃)CO in H₂Ala-Arg and triorganotin(IV) derivatives of Boc-Arg-OH have been synthesized and structurally characterized. The complexes were investigated by FT-IR and ¹¹⁹Sn Mössbauer in the solid state and by ¹H, ¹³C, ¹¹⁹Sn and ¹H-¹H COSY NMR spectroscopy, in solution. The spectroscopic characterization leading to the proposed molecular structures was accomplished on the basis of these experiments. l-Arginine appears to behave as a chelating ligand through carboxylate and -NH₂ groups in Me₂Sn(Arg)₂, while in N_α-t-Boc-l-Arginine complex, the N_α-protected amino group being exempted from coordination, only the carboxylate groups are effectors of bonding to the organometallic moieties. FT-IR spectra give a clear indication that guanidino groups in all the complexes are not involved in coordination, since ν(CN-H) frequency of the terminal guanidino group is fairly constant and unshifted relative to the free ligand. The biological activity of organotin(IV)-complexes was also investigated by use of human HT29 colorectal carcinoma cells. The cytotoxic activity of the compounds was determined by the MTT quantitative colorimetric assay, capable of detecting viable cells in comparison with that exerted by cisplatin. A marked cytotoxic activity for nearly all complexes, is evident being higher than that exerted by cisplatin, while no significant improvement of activity was observed for Me₂Sn(Arg)₂ and Me₂Sn(Ala-Arg), which was confirmed by IC₅₀ values. Then, we assessed whether the cytotoxicity induced by organotin(IV) complexes was associated with the induction of apoptosis. Light microscopy analysis, performed to study the morphological changes induced in HT29 cells, confirmed the results obtained with MTT test. No significant morphological alterations were observed in HT29 cells after treatment with Me₂Sn(Ala-Arg) and Me₂Sn(l-Arg)₂. Cells treated with ⁿBu₂Sn(Boc-Arg)₂, ⁿBu₂Sn(Ala-Arg), ⁿBu₃Sn(Boc-Arg) and Me₃Sn(Boc-Arg), appeared rounded, isolated and detached from culture substrate, indicating the commitment to apoptotic cell death.     

Effect of partial crosslinking on morphology and properties of the poly(β-hydroxybutyrate)/poly(d,l-lactic acid) blends

Poly(β-hydroxybutyrate) (PHB) is a bio-based and biodegradable aliphatic polyester, however its application is limited by some disadvantages such as high price, brittleness, poor processability and low melt-strength due to serious thermal degradation. Partial crosslinking initiated by dicumyl peroxide (DCP) was applied in this work to improve the performance of poly(β-hydroxybutyrate)/poly(d,l-lactic acid) (PHB/PDLLA) blends. The partial crosslinking of the blends and its effect on the properties, morphology, rheology and thermal behavior of the blends were investigated. The tensile strength and impact toughness of the PHB were increased by incorporation of the PDLLA, which were improved further after the partial crosslinking because of an increased compatibility between the PHB and the PDLLA phases. The rheological study revealed that the storage modulus (G′) and complex viscosity (η*) of the blends were increased after addition of the DCP. On the other hand, the crystallization of PHB in the blends was restricted to a certain extent by the formation of partially crosslinked network while its crystal form was not modified.     

Enzymatic synthesis of ω-carboxy-β-hydroxy-(l)-α-amino acids

Commercially available ω-carboxy-aldehydes and glycine have been subjected to the catalytic action of an l-threonine aldolase from Escherichia coli to give the corresponding β-hydroxy-α-(l)-amino acids as a mixture of erythro/threo epimers.Specifically, the reaction with glyoxylic acid (2) gave the epimeric β-hydroxy-(l)-aspartates (t,e)-9 that could be isolated by ion-exchange chromatography in 67% yield. Following esterification and N-Boc protection, the two epimers could be isolated as pure compounds.Similarly, the aldolase-catalyzed addition of glycine to succinic semialdehyde (4) gave the expected mixture of β-hydroxy-l-α-aminoadipic acids (t)-12 and (e)-12 in 34% yield.     

Synthesis of d-fructopyranosides with 2-O-acyl-β-d-fructopyranosides

Glycosylation of 2-O-acyl fructopyranosides was investigated, which were shown to be effective glycosyl donors for d-fructopyranoside synthesis with good β-selectivity and yields. For bulky acceptor 4e, α-anomer 5e was obtained with α/β = 65:23. Unexpected ring-opening was observed during acetylation of 9, indicating the sensitivity of the fructopyranosyl ring.     

Direct access to new β-d-galactofuranoconjugates: application to the synthesis of galactofuranosyl-l-cysteine and l-serine

Galactofuranose post-translational modifications, although quite rare, were detected in some biomolecules produced by parasites. While hexopyranosides were already linked to various peptides and proteins, few hexofuranosides have been artificially conjugated to amino acids. We thus report herein a robust glycosylation methodology to obtain S-alkyl, O-serine and S-cysteine-β-d-galactofuranosides starting from readily available galactofuranose donors. O-Acetyl, thioimidoyl and acetimidoyl donors were compared in terms of yields and selectivity when reacted with mercaptans, l-cysteine and l-serine. Acetimidates turned out to be the best notably for amino acids glycosylation.     

Increasing the inhibitory potency of l-arabino-imidazolo-[1,2]-piperidinose towards β-d-glucosidase and β-d-galactosidase

The synthesis of some potent inhibitors of two retaining β-glycosidases was achieved by introducing aglycon-mimics into the imidazole moiety of l-arabino azasugar 1. The strongest inhibition was observed with the phenyl-ethyl substituent at C(2) of 1 against β-d-galactosidase and β-d-glucosidase, whereas the hydroxymethyl group at C(2) increased only slightly the inhibitory properties.     

A convenient new route to protected and free 2,6-anhydro-d-glycero-d-gulo-heptoses (1-formyl-β-d-glucopyranosides)

A new and efficient process has been developed for the synthesis of 1-formyl-β-d-glucopyranosides from d-glucose.     

Asymmetric epoxidation of α,β-unsaturated ketones catalyzed by silica-grafted poly-(l)-leucine catalysts

A practical procedure has been developed for grafting poly(amino acid) on silica gel as an efficient and recoverable catalyst in the Juliá-Colonna asymmetric epoxidation with high enantioselectivities. Separation and recovery of the catalyst of poly(amino acid) have been remarkably improved by grafting on silica gel without a significant loss of enantioselectivity and activity.     

Stereoselective syntheses of heptaprenylphosphoryl β-d-arabino-and β-d-ribo-furanoses

The stereoselective syntheses of heptaprenylphosphoryl β-d-arabinofuranose and heptaprenylphosphoryl β-d-ribofuranose are described. In the synthesis of the d-arabino product, the stereoselectivity was achieved by the coupling of a suitably protected β-d-arabinofuranosyl phosphate intermediate with an activated form of heptaprenol and subsequent deprotection. In the case of the ribo-analog, the desired β-anomer could be obtained by the more convenient phosphoramidite method. The products were successfully employed in the mycobacterial epimerase assay.     

Supramolecular structures from self-assembled poly(γ-benzyl-l-glutamate)-polydimethylsiloxane-poly(γ-benzyl-l-glutamate) triblock copolypeptides in thin films

We describe the self-assembly of A-B-A triblock copolymers in thin films composed of a soft polydimethylsiloxane (PDMS) central block (B) and two polypeptidic (A) blocks, poly(γ-benzyl)-l-glutamate (PBLG). The PBLG segment exhibits depending on the chain length two distinct secondary conformations either a β-sheet or a α-helical conformation. The direct relationship between the surface morphology and the secondary conformation of the polypeptide segment has been evidenced by atomic force microscopy. For chain lengths below 20 U the polypeptide segments adopt preferentially a β-sheet secondary structure and the triblock copolymer self-assembled in fibers. Moreover, the fiber diameters increased with the chain length of the triblock copolymer. For chain lengths above 20, the α-helical structure is stabilized and a lamellar morphology is formed driven by rod-rod interactions in spite of the very asymmetric composition of the triblock copolymer. However, decreasing the film thickness from 25 to 8 nm, i.e., below the L/2 and due to the preferential attraction of the polypeptide block for the hydrophilic substrate employed, instead of a lamellar morphology a rod-like morphology could be found. Thus, the use of hybrid block copolymer containing polypeptides with particular secondary structures offers novel alternatives to control the self-assembly in thin films compared to traditional amorphous block copolymers.     

A novel amperometric biosensor based on a co-crosslinked l-lysine-α-oxidase/overoxidized polypyrrole bilayer for the highly selective determination of l-lysine

An amperometric biosensor for the determination of l-lysine based on l-lysine-α-oxidase immobilized by co-crosslinking on a platinum electrode previously modified by an overoxidized polypyrrole film is described. The optimization of experimental parameters, such as pH and flow rate, permitted to minimize significantly substrate interferences even using a low specific, commercial enzyme. The relevant biases introduced in the measurement of lysine were just about 1% for l-arginine, l-histidine and l-ornithine, roughly 4% for l-phenylalanine and l-tyrosine. The developed approach allowed linear lysine responses from 0.02 mM up to 2 mM with a sensitivity of 41 nA/(mM × mm²) and a detection limit of 4 μM (S/N = 3). No appreciable loss in lysine sensitivity was observed up to about 40 days. Allowing polypyrrole layer to remove interference from electroactive compounds, the present method revealed suitable to detect l-lysine in a pharmaceutical and cheese sample, showing a good agreement with the expected values.     

Synthesis of quercetin 3-O-β-d-apiofuranosyl-(1→2)-[α-l-rhamnopyranosyl-(1→6)]-β-d-glucopyranoside

A concise method to construct a unique 2,6-branched trisaccharide was established by regioselective glycosylation of three free hydroxyl groups on a 3-O-protected glucose moiety, and successfully used in the synthesis of quercetin 3-O-β-d-apiofuranosyl-(1→2)-[α-l-rhamnopyranosyl-(1→6)]-β-d-glucopyranoside, a flavonol O-glycoside isolated from glandless cotton seeds which showed notable antidepressant activities.     

Solvent-induced morphological diversification in poly(l-lactide-b-?-caprolactone) block copolymer thin films

Biodegradable block copolymer of poly(l-lactide-b-?-caprolactone) (P(LA-b-CL)) was dissolved in various solvents with different solubility as well as volatility, and spin-cast on a highly oriented pyrolytic graphite (HOPG) to prepare thin films. The surface morphologies were observed by using atomic force microscopy (AFM) in a dynamic force (tapping) mode. Particle like morphology was found in the thin films prepared form the dichloromethane and acetone. Higher volatility of dichloromethane and acetone resulted in the reflection of the particle like objects in the solution to HOPG substrate. In contrast, the P(LA-b-CL)s in toluene and 1,4-dioxane exhibited different morphologies compared to those in dichloromethane and acetone. Lower volatility of toluene and 1,4-dioxane assisted the epitaxial crystallization of PCL component along the HOPG lattice, that was revealed by enzymatic degradation of PLLA component by proteinase K. Thus, adjusting the solubility and solvent volatility for the film formation provided morphological divergence of the P(LA-b-CL) block copolymer, and this technique would be applicable for the surface patterning of biodegradable polymers.     

l-Galactose as a natural product: isolation from a marine octocoral of the first α-l-galactosyl saponin

Saponine 1 (6′-O-acetyl-3β-pregna-5,20-dienyl-α-l-galactopyranoside), that contains a l-galactose moiety linked to the aglycone through an infrequent α-glycosidic bond, has been isolated from the marine octocoral Muricea c.f. purpurea. This constitutes the first report on the occurrence of l-Gal as a nonpolymeric natural product. A CD procedure for the absolute stereochemical assignment of saponins, based on the CD analysis of its perbenzoylated derivative, is proposed.     

Biodegradable poly(dl-lactide)/poly(ε-caprolactone) mixtures: Miscibility at the air/water interface

Mixtures of biodegradable polymers, poly(dl-lactide) and poly(ε-caprolactone) monolayers at the air/water interface have been studied. Surface pressure-area isotherms of poly(dl-lactide), poly(ε-caprolactone) and their mixtures were obtained by monolayer compression at constant temperature. The behavior of the mixed monolayers was analyzed according to the classical addition rule. Good agreement was observed between experimental and ideal behavior except for one composition where a negative deviation was observed. The polymer monolayer miscibility was corroborated by comparison between the surface pressure-area isotherms of the random copolymers (dl-lactide-co-ε-caprolactone) and their mixtures at the same compositions. Brewster angle microscopy (BAM) shows homogeneity in the monolayers in the whole range of compositions. These results also confirm the miscibility of the mixtures.     

A practical synthesis of fully protected l-γ-carboxyglutamic acid

We have developed a new synthetic route for the preparation of Fmoc protected l-γ-carboxyglutamic acid in 60% overall yield (>99% ee) via a six-step synthesis from d-Garner’s aldehyde. An aldol condensation and the selective cleavage of the acetonide protective group are key steps.     

Lipase-catalysed degradation of copolymers prepared from ?-caprolactone and dl-lactide

A series of copolymers were prepared by ring-opening polymerization of ?-caprolactone and dl-lactide, using zinc lactate as catalyst. The resulting PCL/PLA copolymers were characterized by various analytical techniques such as NMR, SEC, DSC and X-ray diffraction. The [CL]/[LA] ratios of the copolymers are very close to those in the feed, indicating a good conversion of monomers. The copolymers with CL contents higher than 50% appear semi-crystalline, the crystalline structure being of the PCL-type. Compression moulded polymer films were allowed to degrade in a pH = 7.6 phosphate buffer containing Pseudomonas lipase. Data show that copolymers with CL contents lower than 25% are not degradable and the degradation rate increases with CL content for CL-rich copolymers. Various soluble degradation products are detected in the degradation medium, including CL₁ to CL₃ and LA₁ to LA₄ homo-oligomers, and CL₂LA₁ co-oligomer. The presence of LA homo-oligomers and CL₂LA₁ co-oligomer suggests that Pseudomonas lipase can not only degrade PCL but also LA short blocks along PCL/PLA copolymer chains. On the other hand, little changes of composition are detected during degradation, in agreement with a surface erosion mechanism as shown by ESEM.     

Synthesis of chiral thiourea–phosphine organocatalysts derived from l-proline

A novel class of thiourea–phosphine was prepared from l-proline as a chiral renewable resource. The original structure of the chiral framework offers an interesting potential to the construction of bifunctional organocatalysts for asymmetric transformations.