石蜡相分光光度法测定阳离子表面活性剂溴化十六烷基三甲铵

１引言 固相光度法是７０年代提出的,与相应的液相光度法相比,它选择性好,且灵敏度要高出１～２个数量级。石蜡相光度法是近年来发展起来的一种新型固相光度法,它不仅具有其它固相光度法的灵敏度高、选择性好的优点,还兼有液相光度法测量体系均匀的特点,克服了其它固相光度法由于固体颗粒粒径不一致、对络合物吸附不均匀及装样操作不一致而给测量结果带来较大影响的缺点。本文以溴化十六烷基三甲铵（ＣＴＭＡＢ）为代表,用石蜡相光度法测定了阳离子表面活性剂,避免了使用有机溶剂,无毒,无环境污染,且方法简单,灵敏度高。２实验…     

荧光桃红B在CTMAB上Langmuir吸附及阳离子表面活性剂测定新技术

在离子型表面活性剂溶液中 ,电荷均匀分布在分子长链并形成点静电场 ,容易吸附带异性电荷的探针色体。研究了利用微相吸附 光谱修正 (MPASC)技术分析溴化十六烷基三甲胺(CTMAB)与荧光桃红B(PB)的结合反应 ,并分析了表面活性剂在微量分析中的增效机理。结果表明 ,PB CTMAB作用符合Langmuir单分子层吸附 ,产物结合比为 2∶1,结合常数为 3.4 6× 10 5(15°) ,摩尔吸光系数 (5 6 5nm)ε =1.14× 10 5L·mol- 1·cm- 1,胶束聚集态 (PB2 CTMAB) 78,定量测定了样品中阳离子表面活性剂含量 ,结果良好     

十六烷基吡啶在玻碳电极表面上的吸附过程

本文用交流阻抗法在长光程薄层光谱电解池中研究了溴化十六烷基吡啶(CPyBr)在玻碳电极上的吸附过程。在复数平面图的高频区获得了与电解池结构电容有关的半圆,低频区获得了与CPyBr吸附有关的阻抗及Warburg阻抗,建立了CPyBr的单分子层吸附模型及电极过程的交流阻抗等效电路。理论预测与实验数据吻合较好。     

亮绿褪色反应用于微量季铵盐型阳离子表面活性剂的分光光度法测定研究

在 p H 7.0 0 Tris- HCl缓冲介质中 ,微量季铵盐型阳离子表面活性剂溴化十六烷基三甲胺 ( CTMAB)和溴化十六烷基吡啶 ( CPB)能使亮绿 ( Brilliant Green,简称 BG)产生灵敏的褪色反应 ,发现其褪色程度ΔA (ΔA =A0 - Ai)与 CTMAB及 CPB用量存在定量关系。研究了该褪色反应的最佳条件 ,探讨了反应机理 ,拟定了利用该反应用于微量 CTMAB和 CPB的测定方法 ,CTMAB和 CPB的浓度分别在0～ 6× 1 0 - 5mol/ L ,0～ 8× 1 0 - 5mol/ L范围内符合比耳定律。拟定的方法用于电镀废液样品中微量 CTMAB的测定 ,结果满意     

用锰(Ⅱ)-氨三乙酸-溴代十六烷基三甲胺-高碘酸钾-灿烂甲酚蓝体系催化光度法测定锰

基于存在活化剂氨三乙酸和增敏剂溴代十六烷基三甲胺，锰（Ⅱ）催化高碘酸钾氧化灿烂甲酚蓝的反应，拟定了测定痕量锰的催化光度法，讨论了有关反应机理。本法由于添加了溴代十六烷基三甲胺，灵敏度揭高2．5倍，测定锰含量线性范围为8．0×10－4～8．0×10－3mg／L，检出限为7．0×10－5mg／L，相对标准偏差为4．7％（n＝11），可用于测定茶叶和水样中的锰。     

溴酚蓝-氯化十六烷基吡啶光度法测定水中痕量阴离子表面活性剂

本文研究了溴酚蓝(BPB)与氯化十六烷基吡啶(CPC),阴离子表面活性剂(AS)与CPC形成缔合物的反应.发现在pH=8.0的NH_3·H_2O-NH_4Cl缓冲溶液中,AS能定量置换出CPC-BPB缔合物中的BPB而显色,其最大吸收在590nm处.阴离子表面活性剂十二烷基本磺酸钠(DBSNa)和十二烷基磺酸钠(DSNa)的ε值分别为2.9 ×10_4和3.2×10~4L·mol~(-1)·cm~(-1).在80μg CPC存在下,DBSNa和DSNa浓度分别在0～80μg/25 ml和0～60μg/25ml范围内符合比耳定律.应用此法测定环境水样中的痕量阴离子表面活性剂,结果满意.     

用刚果红分光光度法测定阳离子表面活性剂

在弱酸性的HCl-NaAc缓冲介质中,某些阳离子表面活性剂(CS)与刚果红(CR)反应,形成离子缔合物时,刚果红发生褪色作用,最大褪色波长分别在510nm(CR-溴化十六烷基吡啶(CPB)体系)、514nm(CR-十六烷基三甲基溴化铵(CTAB)体系)。在最大褪色波长处,CS的浓度在0~4.16×10-5mol.L-1(CPB体系)、0~3.18×10-5mol.L-1(CTAB体系)范围内遵守比尔定律,表观摩尔吸光系数为1.62×104L/(mol.cm)(CPB体系)、1.72×104L/(mol.cm)(CTAB体系),检出限为9.78×10-7mol.L-1(CPB体系)、1.04×10-6mol.L-1(CTAB体系)。方法具有较高的灵敏度和良好的选择性,用于水样中CS的测定,结果满意。     

阴离子表面活性剂－溴化十二烷基二甲基苄基铵－溴百里酚蓝显色反应的分光光度法研究

本文研究了溴化十二烷基二甲基苄基铵－溴百里酚蓝与阴离子表面活性剂显色反应的适宜条件。结果表明，在ｐＨ７．４～８．２范围内阴离子表面活性剂与题示试剂形成１：２：１的绿色离子缔合物，其最大吸收峰位于６１４ｎｍ处。表现摩尔吸光系数分别为：＝３．９９×１０￣４Ｌ·ｍｏｌ￣（－１）·ｃｍ￣（－１）；＝３．７０×１０￣４Ｌ·ｍｏｌ￣（－１）·ｃｍ￣（－１）；＝１．７１×１０￣４Ｌ·ｍｏｌ￣（－１）·ｃｍ￣（－１）。ＳＤＢＳ在０～１９５μｇ／１０ｍＬ，ＳＤＳ在０～１５８μｇ／１０ｍＬ，ＳＬＳ在０～６０μｇ／１０ｍＬ范围内遵守比耳定律。该法用于河水和生活废水中阴离子表面活性剂测定，结果满意。     

刚果红-溴化十六烷基吡啶光度法测定阴离子表面活性剂

日常生活中常用的表面活性剂多数是阴离子洗涤剂.洗涤剂进入水环境后,其分子聚集在水和其它介质的表面,产生泡沫、乳化和微粒悬浮等现象,隔绝水中氧与空气中氧的交换,影响水体净化,导致水质恶化,由此对水体的环境污染问题越来越严重,引起了人们的重视.因此, 准确快速地测定阴离子表面活性剂的含量, 对于研究其在环境中的转化、迁移及对生理过程的影响, 均具有重要意义.     

锑(Ⅲ)-钛铁试剂-溴化十六烷基三甲胺体系极谱络合吸附波研究

在 0 .0 4mol·L- 1磷酸中 ,锑 (Ⅲ ) 钛铁试剂 (Tiron) 溴化十六烷基三甲胺体系产生灵敏的极谱络合吸附波。峰电位为 - 0 .4 4V(vs .SCE) ,二阶导数峰高与锑 (Ⅲ )浓度在 8.2× 10 - 10 ～ 2 .0× 10 - 6mol·L- 1范围内呈线性关系 ,检出限达 4× 10 - 10 mol·L- 1。研究了极谱波的性质及电极反应机理。方法应用于三氧化二砷及铜合金中微量锑的直接测定 ,结果满意     

Langmuir Aggregation of Stain on Ionic Surfactant and its Application: Interaction of Bromo‐Pyrogallol Red with Cetyl Trimethylammonium Bromide (CTAB) and Determination of Molybdenum Traces

The microphase adsorption‐spectral correction (MPASC) technique was de scribed and applied to study the interaction of bromo‐pyrogallol red (BPR) with cetyl trimethylammonium bromide (CTAB). The synergism mechanism of micelles was analyzed and discussed. The large electrostatic micelle adsorbs the chromophore in only the monolayer, and the adsorption obeys the Langmuir adsorption. The formation of the (BPR₂·CTAB)₇₈ aggregate accelerates the Mo‐BPR complex reaction. Experimental results showed the adsorption constant of the adsorption aggregate 6.20 × 10⁵ and its molar absorptivity ?_r^610nm = 1.40 × 10⁶ lmol^?1cm^?1. For analysis of samples, the recovery of Mo was between 97.4 and 107% and the RSD was less than 4.39%.     

Langmuir Aggregation of Thionin in Nucleic Acids and Its Application

Introduction　　Nucleicacidchemistryhasbeenattractingtheattentionofmanybiochemists.1 7Understandingtheinteractionofachromophorewithnucleicacidscanhelpustorealizethefunctionofsuchgeneticbiopolymersandanalyzethetransmis sionofthegeneticinformation .Thequantitativedeterminationofnucleicacidsisalsosignificantinclinicaltestsandlabora torypractice .However,theinteractionhasnotbeenelucidat edsatisfactorilyandearlierobservationshavenotbeenex plainedclearlyandreasonably ,e.g .,thePesaventoequa tion8an…     

Langmuir Aggregation of Bordeaux R on a Cationic Surfactant and Its Application to Sensitive Quantitative Determination of Copper

The microphase adsorption-spectral correction (MPASC) technique has been applied to the study of the interaction between cetyl trimethylammonium bromide (CTMAB) and the dye Bordeaux R (BR) at pH 9.6. The aggregation of BR on the CTMAB surface obeys the Langmuir adsorption isotherm. The aggregation of BR on CTMAB accelerates the complexation between Cu(II) and BR. Results at 25°C show that the adsorption constant of the CTMAB–BR 1:1 aggregate is 6.80 × 10⁴. In the presence of CMTAB, the Cu–Br complex with a mole ratio of 2:1 has a cumulative stability constant of 1.08 × 10¹¹. The cooperative adsorption and complexation have been applied successfully in a sensitive determination of trace amounts of copper.     

酸性铬蓝K在蛋白质大分子上Langmuir吸附聚集及应用

用微相吸附 -光谱修正 (MPASC)技术研究蛋白质 (BSA)与酸性铬蓝K(ACBK)探针分子间的相互作用。通过pH3.5的介质中蛋白质与酸性铬蓝K反应的光谱研究 ,测定了结合产物的物理化学参数 :结合比为n(ACBK)∶n(BSA)=62∶1,平衡常数KBSA -ACBK=2.2×105。BSA -ACBK摩尔吸收系数ε584=3.9×105L·mol -1·cm -1。该吸附反应用于蛋白质样品测定 ,结果良好。     

探针体在蛋白质大分子上Langmuir吸附聚集及应用──蛋白质/荧光桃红B(PB)结合反应研究

蛋白质化学是生物化学家当今感兴趣的前沿研究领域. 研究小分子(离子)在生物大分子上的聚集形式以及机理, 帮助人们弄清其污染物及毒物在生物大分子上的结合, 在病理分析、临床检测以及基因变异有重要意义. 常用光谱分析方法包括分光光度法[1～6]、荧光法[7,8]和共振光散射光谱技术(RRS)等[9～12]. 但是, 大分子与探针分子间的结合机理仍存在一些尚未解决的问题[13,14]. 蛋白质分子由于复杂的立体构象形成弱微静电场[15,16], 在其作用下, 带电荷的小分子以单分子层形式被吸附到微相电场表面.     

Langmuir aggregation of Evans blue on cetyltrimethylammonium bromide and on proteins and its application

The microphase adsorption-spectral correction (MPASC) technique is described and applied to the study of the interactions of Evans blue (EB) with cetyltrimethylammonium bromide (CTAB) and with four proteins: bovine serum albumin (BSA), myoglobin (Mb), hemoglobin (Hb) and ovalbumin (OVA). EB can be adsorbed on a cationic surfactant and on protein by electrostatic force and the aggregation obeys the Langmuir isotherm. Results have shown that the products are formed as follows: monomer aggregate EB·CTAB, micellar aggregate (EB·CTAB)₇₈ and protein aggregates (EB₆₈·BSA), (EB₁₄·OVA), (EB₁₂₆·Mb) and (EB₅₈·Hb). The adsorption constant of the aggregates are calculated to be K_EB·CTAB=2.95×10⁶, K_EB68·BSA=3.40×10⁴, K_EB14·OVA=5.20×10², K_EB126·Mb=6.81×10² and K_EB58·Hb=5.73×10², respectively. The aggregation of EB in proteins is sensitive in the presence of CTAB and selective in the presence of EDTA and it has been applied to the analysis of samples with satisfactory results.     

SPAPT-CTMAB-AS显色反应的研究及应用

合成的新试剂1-(4-磺酸基苯基)-3-［4-(苯基偶氮)苯基］-三氮烯（SPAPT）与阳离子表面活性剂溴化十六烷基三甲铵（CTMAB）和阴离子表面活性剂（AS）在三乙醇胺调节的碱性（pH 11.00～11.20）介质中形成三元显色配合物。配合物最大吸收λ位于590 nm,测定阴离子表面活性剂十二烷基苯磺酸钠（DBOSO     

Study on the Interaction between a Novel Ionic Liquid Probe and Anionic Surfactants Using Resonance Light Scattering Spectra and Its Analytical Application

The interaction between anionic surfactants (AS) and 1‐hexadecyl‐3‐methylimidazolium bromide [C₁₆mim]Br was studied by using resonance light scattering (RLS) technique, UV‐Vis spectrophotometry and fluorometric methods. In Britton Robinson (BR) buffer (pH 6.0), [C₁₆mim]Br reacted with AS to form supermolecular complex which resulted in enhancement in RLS intensity. Their maximum RLS wavelengths were all at 390 nm. Some important interacting experimental variables, such as the solution acidity, [C₁₆mim]Br concentration, salt effect and addition order of the reagents, were investigated and optimized. Under the optimum conditions, quantitative determination ranges were 0.001–7 μg·mL^?1 for dodecyl sodium sulfate (SDS), 0.001–6 μg·mL^?1 for sodium dodecylbenzene sulfonate (SDBS) and 0.005–7 μg·mL^?1 for sodium lauryl sulfonate (SLS), respectively, while the detection limits were 1.3 ng·mL^?1 for SDS, 1.0 ng·mL^?1 for SDBS and 5.1 ng·mL^?1 for SLS, respectively. Based on the ion‐association reaction, a highly sensitive, simple and rapid method has been established for the determination of AS.