Determination of Fluorescent Whitening Agents in Infant Clothes and Paper Materials by Ion‐Pair Chromatography and Fluorescence Detection

A simple and rapid method was developed to simultaneously determine four stilbene‐type disulfonate and one distyrylbiphenyl‐type fluorescent whitening agents (FWAs) in infant clothes and paper materials by ion‐pair chromatography. FWAs were extracted from cloth and papers samples using a hot‐water extraction. The aqueous extract was then mixed with ion‐pair reagent, extracted with C₁₈‐SPE cartridges and eluted with methanol. The contents of FWAs were determined by an isocratic ion‐pair chromatography with RP‐C₁₈ column and equipped with fluorescence detection. Limits of quantitation were 0.04 to 0.45 ng/g in 10 g of samples. Recovery of FWAs in spiked infant cloth and paper samples was between 76 to 92% and precision (RSD) ranging from 2.0 to 4.0%. Analysis of three infant clothes and six paper materials found concentrations of selected FWAs ranging between n.d. to 24 μg/g and n.d. to 3.8 μg/g, respectively.     

Determination of fluorescent whitening agents in laundry detergents and surface waters by solid-phase extraction and ion-pair high-performance liquid chromatography

A simple method was developed to detect four stilbene-type disulfonate and one distyrylbiphenyl-type fluorescent whitening agents (FWAs) in household laundry detergents and surface waters by ion-pair high-performance liquid chromatography. The FWA concentrations in detergents were measured directly. The contents of FWAs in water samples were extracted by solid-phase extraction (C18-SPE) with ion-pairing reagent, and were then determined by an isocratic ion-pair chromatography (IPC) using a C18 column, applying tetrabutylammonium hydrogensulfate (TBA) as the ion-pairing reagent in mobile phase, and equipped with fluorescence detection. Water samples at various pH conditions for SPE were evaluated. Experimental results indicate that the proposed method is precise and sensitive in analyzing FWAs, and enables quantitation of 0.01-0.1 microg/l in 100 ml water samples. The recovery rates of FWAs in spiked water samples were between 73 and 89%, and the precision (RSD) ranged from 2.6 to 8.9%. Over 7200 microg/g of 4,4'-bis(2-sulfostryl)-biphenyl (DSBP) and 2320 microg/g of 4,4'-bis[(4-anilino-6-morpholino-1,3,5-triazine-2-yl)-amino]stilbene-2,2'-disulfonate (DAS1) were detected in household laundry detergents. Trace amounts of DSBP were detected in surface water samples ranging from 0.2 to 3.7 microg/l.     

Determination of fluorescent whitening agents in environmental waters by solid-phase extraction and ion pair liquid chromatography-tandem mass spectrometry

A comprehensive method for the trace determination of four stilbene-type disulfonate and one distyrylbiphenyl-type fluorescent whitening agents (FWAs) in environmental water samples was developed and validated. Various solid-phase extraction (SPE) cartridges were investigated. The newly developed Oasis WAX (weak mixed-mode anion exchange and reversed-phase sorbent) SPE cartridge provides the optimal sample extraction results. The analytes were then identified and quantitated by liquid chromatography-electrospray ionization tandem mass spectrometry (HPLC-ESI-MS-MS) in negative ionization mode, applying di-n-hexylammonium acetate (DHAA) as the ion-pairing reagent in mobile phase. Limits of quantitation (LOQs) were established between 4 and 18 ng/l in 50 ml of water samples. Intrabatch and interbatch precision with their accuracy at two concentration levels were also investigated. Precision for these five FWAs, as indicated by RSD, proved to be less than 13 and 11%, respectively, for intra- and interbatch. Accuracy, expressed as the mean recovery, was between 68 and 97%. The method was finally applied to environmental water samples, showing the occurrence of five FWAs in both river water and wastewater treatment plant (WWTP) effluent samples.     

Simultaneous determination of 11 fluorescent whitening agents in food‐contact paper and board by ion‐pairing high‐performance liquid chromatography with fluorescence detection

4,4′‐Diaminostilbene‐2,2′‐disulfonic acid based fluorescent whitening agents (DSD‐FWAs) are prohibited in food‐contact paper and board in many countries. In this work, a reliable high‐performance liquid chromatography method was developed for the simultaneous determination of 11 common DSD‐FWAs in paper material. Sample preparation and extraction as well as chromatographic separation of multicomponent DSD‐FWAs were successfully optimized. DSD‐FWAs in prepared samples were ultrasonically extracted with acetonitrile/water/triethylamine (40:60:1, v/v/v), separated on the C₁₈ column with the mobile phase containing tetrabutylammonium bromide, and then detected by a fluorescence detector. The limits of detection were 0.12–0.24 mg/kg, and the calibration curves showed the linear correlation (R² ≥ 0.9994) within the range of 8.0–100 ng/mL, which was equivalent to the range of 0.80–10 mg/kg in the sample. The average recoveries and the RSDs were 81–106% and 2–9% at two fortification levels (1.0 and 5.0 mg/kg) in paper bowls, respectively. The successful determination of 11 DSD‐FWAs in food‐contact paper and board obtained from local markets indicated that the newly developed method was rapid, accurate, and highly selective.     

高效液相色谱法同时测定塑料和纸质包装材料中6种荧光增白剂

建立了同时测定塑料和纸质食品包装材料中6种脂溶性荧光增白剂(FWA 135、FWA 184、FWA 185、FWA199、FWA 378和FWA 393)的高效液相色谱方法。用三氯甲烷-乙腈(3∶7,v/v)混合溶液提取,经HLB小柱净化后用高效液相色谱-荧光检测法进行定性定量分析。采用Phenomenex C18色谱柱分离,以5 mmol/L的乙酸铵水溶液和乙腈为流动相,进行梯度洗脱。结果显示:FWA 393在15~1500μg/L范围内的线性关系良好,其余5种荧光增白剂在5~500μg/L范围内线性关系良好,相关系数均大于0.999;加标回收率为80.4%~125.0%;相对标准偏差(RSD,n=6)为1%~13%。应用该方法分析了市场销售的12个样品以验证方法的实用性。该方法前处理简单,回收率高,精密度好,适用于食品包装材料中6种荧光增白剂的检测。     

Determination of total fat in milk- and soy-based infant formula powder by supercritical fluid extraction

Commercially available simple benchtop systems using CO2 supercritical fluid extraction (SFE) eliminate expensive organic solvent disposal problems and offer potential to meet a demand for rapid, accurate high-volume gravimetric determinations of total fat content of infant formula powders. A Data Quality Objectives (DQOs) approach was used to evaluate the performance characteristics of instrumental SFE extraction for determination of total gravimetric fat in infant formula. The established DQOs included the following: ACCURACY: Correct values were obtained for a suitable reference material, SRM 1846 Infant Formula [National Institute of Standards and Technology (NIST), Gaithersburg, MD]. RUGGEDNESS: Variables were defined as (1) extraction time (35 min optimum); (2) ratio of sample size to diatomaceous earth support material (1 g sample/2 g support); (3) ratio of distilled water to alcohol (50% isopropanol optimum for both milk- and soy-based infant formula samples); (4) extraction flow rate was 3-3.5 mL/min optimum. PRECISION: Relative standard deviations of multiple determinations fell within the Horwitz limits of acceptability of < or = 2.8% at the level of analyte determined (0.34-2.5% obtained). SCOPE OF APPLICABILITY: Includes milk- and soy-based infant formula powders. Research data were obtained by use of a commercially available fat analyzer. Samples of the SRM, 2 commercial milk-based and 3 commercial soy-based infant formula products were distributed to 2 additional collaborating laboratories. Very good agreement was obtained among the submitting and collaborating laboratories for these samples. The use of clearly defined DQOs to establish method performance characteristics, along with the commercially available reference material, provided the mechanism for verification and validation of analytical methodology.     

高效液相色谱法测定一次性卫生用纺织品中荧光增白剂

建立了同时测定一次性卫生用纺织产品中4种荧光增白剂(FWA 357、FWA 220、FWA 204和FWA 113)的高效液相色谱-二极管阵列检测器(HPLC-DAD)检测方法。样品用20 mL超纯水作提取剂,于80 ℃下振荡提取30 min,用高效液相色谱进行定性、定量分析。采用SB Phenyl色谱柱(250 mm×4.6 mm, 5 μm)分离,以5 mmol/L乙酸铵和乙腈为流动相梯度洗脱,成功地将待测荧光物质分离。4种荧光增白剂在0.025~400 mg/L范围内线性关系良好,线性相关系数(r²)均大于0.9999;检出限(S/N=3)分别为0.1、0.1、0.02、0.02 mg/L;方法定量限(S/N=10)分别为1.0、2.0、5.0、5.0 mg/kg。添加水平为20~800 mg/kg时,回收率为83.7%~101.0%,相对标准偏差(n=6)为2.4%~7.0%。该方法前处理简单,回收率高,适用于一次性卫生用纺织产品中4种荧光增白剂的测定。     

Determination of pirimicarb and endosulfan in commercial pesticide formulations by Fourier transform infrared spectrometry

A routine method based on Fourier transform infrared spectrometry was developed for the simultaneous determination of pirimicarb and endosulfan in commercially available pesticide formulations. The method is based on peak area absorbance measurements between 1362 and 1352 cm(-1), corrected with a baseline fixed at 1338 cm(-1), for pirimicarb and peak area absorbance measurements between 919 and 909 cm(-1) with a baseline fixed at 931 cm(-1) for endosulfan; chloroform solutions for analysis were obtained by direct dilution of emulsifiable concentrates or by solvent extraction from solid samples. Various extraction conditions and appropriate band selection were investigated, and interference studies were performed. Under the experimental conditions selected, limits of detection of 13 microg/g for pirimicarb and 150 microg/g for endosulfan were obtained that correspond to 0.13 and 1.6% (w/w), respectively, in commercial samples. Results from analyses of commercial samples by the developed method compared well with those obtained by a liquid chromatography reference method.     

Solid‐phase extraction using chloropropyl functionalized sol–gel hybrid sorbent for simultaneous determination of organophosphorus pesticides in selected fruit samples

A new sol–gel hybrid methyltrimethoxysilane‐chloropropyltriethoxysilane was prepared as sorbent for solid‐phase extraction. The extraction efficiency of the prepared sol–gel hybrid methyltrimethoxysilane‐chloropropyltriethoxysilane was assessed by using three selected organophosphorus pesticides, namely, chlorpyrifos, profenofos, and malathion. Gas chromatography–mass spectrometry was used for detection of organophosphorus pesticides. Several vital parameters were optimized to identify the best extraction conditions. Under the optimum extraction conditions, solid‐phase extraction‐methyltrimethoxysilane‐chloropropyltriethoxysilane method showed good linearity range (0.05‐1 μg/mL) with coefficient of determination more than 0.995. The limits of detection obtained were in the range of 0.01–0.07 μg/mL and limits of quantification ranging from 0.03 to 0.21 μg/mL. The limits of detection obtained for the developed method were 2.3–6.5× lower than the limits of detection of commercial octadecyl silica sorbent. Real samples analysis was carried out by applying the developed method on red apple and purple grape samples. The developed method exhibited good recoveries (88.33–120.7%) with low relative standard deviations ranging from 1.6 to 3.3% compared to commercial octadecyl silica sorbent, which showed acceptable recoveries (70.3–100.2%) and relative standard deviations (6.3–8.8%). The solid‐phase extraction‐methyltrimethoxysilane‐chloropropyltriethoxysilane method is presented as an alternative extraction method for determination of organophosphorus pesticides.     

Contribution to the Development of Indirect Atomic Absorption Methods: Application of the Ion Pair 1,10-phenanthroline-mercury(II)-iodide to Iodide Determination in Water and Infant Formulae Samples

A method to determine iodide is developed, based on the formation of an ion pair between 1, 10-phenanthroline, mercury(II) and iodide that can be selectively extracted into IBMK. When the IBMK layer is analyzed by electrothermal atomic absorption spectrometry (ETAAS) for mercury, iodide can be quantified too. Parameters related to the preparation of the ion pair and to the measuring process are studied. Thus, 7.2–7.4 reveals to be the best pH interval to carry out the extraction, and 250 and 1000?°C, respectively, the mineralization and atomization temperatures for mercury determination by ETAAS. The procedure is applied to drinking tap water and commercial infant formulae milk samples. The accuracy of the method has been investigated by means of the analytical recovery for water samples (mean analytical recovery obtained at different concentration levels 98.1%) and by using the certified reference material BCR CRM No 151 Skim Milk Powder (Spiked) for the infant formulae (results within certification interval). The repeatability of the measurements at different concentration levels gave a RSD lower than 10% for both types of samples and the repeatability of the whole procedure for infant formulae shows a RSD of 1.33%. In addition, the limits of detection and quantification were 2.5?μg/L and 8.5?μg/L, respectively, for drinking water and 1.1?μg/g and 3.8?μg/g, respectively, for infant formulae.     

Stir bar sorptive extraction for the analysis of short‐chain chlorinated paraffins in water

An optimised method using stir bar sorptive extraction (SBSE) and a thermal desorption‐GC‐electron capture detector (GC‐ECD) for the determination of short‐chain chlorinated paraffins from water samples was developed. Recoveries near to 100% were obtained by using 20 mm×0.5 mm (length×film thickness) PDMS commercial stir bars from 200 mL spiked water samples and 20% methanol addition with an extraction period of 24 h. Method sensitivity, linearity and precision were evaluated for surface water and wastewater spiked samples. A LOD of 0.03 and 0.04 μg/L was calculated for surface and wastewater, respectively. The precision of the method given as an RSD was below 20% for both matrices. The developed method was applied for the analysis of two real samples from a contaminated river and a wastewater treatment plant. Results were in accordance with those obtained using a previously developed method based on solid phase microextraction (SPME).     

Simultaneous separation of ergot alkaloids by capillary electrophoresis after cloud point extraction from cereal samples

A new and sensitive analytical methodology for ergot alkaloids (EA) determination from cereal samples based on cloud point extraction (CPE) prior to CE‐UV absorbance was developed. The methodology involves extraction under acid conditions and subsequent preconcentration by applying a simple, rapid and environmentally friendly low volume surfactant extraction procedure. After extraction, CE analysis was carried out by performing dilutions on preconcentrated surfactant rich phase, achieving a single peak or simultaneous alkaloids determination. A real preconcentration factor of 22 of total EA was obtained, demonstrating the efficiency of this methodology. The limits of detection were 2.6 and 2.2 μg/kg for ergotamine and ergonovine, respectively. Validation procedure revealed suitable linearity, accuracy and precision. The average extraction and clean‐up recoveries were compared with the theoretical values and were better than 92%. This method was successfully applied to the determination of EA in different varieties of commercial flour samples, two grain samples and one of the leading brands cereal‐based product for infant feeding. The high sensitivity achieved for EA determinations in real samples suggests CPE procedure as an interesting approach to improve CE‐UV visible detection limits. Moreover, the whole process could be considered as a contribution to green chemistry because nonorganic solvents were involved, demonstrating its great potential over conventional techniques.     

New extraction method for the analysis of linear alkylbenzene sulfonates in marine organisms. Pressurized liquid extraction versus Soxhlet extraction

A new method has been developed for the determination of linear alkylbenzene sulfonates (LAS) from various marine organisms, and compared with Soxhlet extraction. The technique applied includes the use of pressurized liquid extraction (PLE) for the extraction stage, preconcentration of the samples, purification by solid-phase extraction (SPE) and analysis by liquid chromatography with fluorescence detection. The spiked concentrations were added to the samples (wet mass of the organisms: Solea senegalensis and Ruditapes semidecussatus), which were homogenized and agitated continuously for 25 h. The samples were extracted by pressurized hot solvent extraction using two different extraction temperatures (100 and 150 degrees C) and by traditional Soxhlet extraction. The best recoveries were obtained employing pressurized hot solvent extraction at 100 degrees C and varied in the range from 66.1 to 101.3% with a standard deviation of between 2 and 13. Detection limit was between 5 and 15 microg kg(-1) wet mass using HPLC-fluorescence detection. The analytical method developed in this paper has been applied for LAS determination in samples from a Flow-through exposure system with the objective of measuring the bioconcentration of this surfactant.     

Subcritical water and dynamic sonication-assisted solvent extraction of fluorescent whitening agents and azo dyes in paper samples

Two low-volume solvent continuous extraction methods are applied to the extraction of paper matrices. In the methods reported here, a complex mixture of fluorescent whitening agents (FWAs) and azo dyes (AZOs) used in paper materials intended to come into contact with foodstuffs was extracted by using subcritical water extraction (SWE) and dynamic sonication-assisted solvent extraction (DSASE). Rationale for the work is based upon migration concerns of these groups of analytes from the packaging to the packaged items, thus compromising their subjective and/or objective quality. In SWE, sample was extracted in 21 min with 0.5 mL of water, whereas the DSASE method required 11 min and used 7 mL of water. DSASE was further developed by incorporating an organic modifier in order to change water polarity, thus improving extraction of moderately polar analytes. This way, modified-DSASE used a total organic volume of 0.9 mL which represents a reduction of 200 times in organic solvent consumption (200 mL versus approximately 1.0 mL) and 11 times in extraction time (2h versus 11 min) compared to the existing methods. SWE was able to extract only 9 out of 12 test analytes with average recoveries between 10 and 25% whereas modified-DSASE succeed in extracting all the target analytes with an average recovery of 89%. Complete discussion and explanation concerning these differences are provided in the text.     

Fully automated determination of vitamins A and E in milk-based products using a robotic station-HPLC arrangement

An automated method, which includes an extraction procedure based on the AOAC official method of analysis for vitamins A and E in milk-based infant formula, was developed. The whole procedure is carried out automatically in a robotic station coupled to a liquid chromatograph with a UV detector for individual separation and quantification of the vitamins. Different commercial products (milk, infant formula and nutritional supplements) were analysed, and the data were compared with those obtained using the manual AOAC extraction method. Relative standard deviations using the automated method were 5.92 and 2.57% for vitamin A and E, respectively.     

Determination of pesticides in milk-based infant formulas by pressurized liquid extraction followed by gas chromatography tandem mass spectrometry

An efficient and selective automated analytical method for the determination and quantification of a selected group of 12 organochlorine and organophosphorous pesticides in milk-based infant formulas has been developed. The samples were extracted by pressurized liquid extraction (PLE) and analysed using GC-MS/MS. The use of alumina as the fat retainer in the PLE extraction cell, together with the application of an injector temperature program during the GC injection process, avoided typical matrix interferences without the application of additional cleanup steps. Mean recoveries of between 70 and 110% were achieved for most of the compounds, except for chlorpyrifos methyl (50%), vinclozoline (48%), fenitrothion (56%) and procymidone (53%), with relative standard deviations ranging from 9 to 17%. Low limits of quantification were obtained for the studied compounds, from 0.01 to 2.6 μg kg⁻¹, thus guaranteeing their accurate determination within the rigorous requirements established for baby food. The validated method was applied to a pilot monitoring study in Spain. Twenty five samples of different brands of powdered infant formulas were obtained from supermarkets. Positive findings of endosulfan I, endosulfan II, fenitrothion, chlorpyrifos ethyl and bifenthrin were detected at concentrations ranging from 0.03 to 5.03 μg kg⁻¹.     

Measurement of perchlorate in water by use of an 18O-enriched isotopic standard and ion chromatography with mass spectrometric detection

A novel analytical method has been developed for the determination of 4-tert.-octylphenol (OP) and 4-nonylphenol (NP) in laboratory animal feed samples, which involves stir bar sorptive extraction (SBSE) followed by liquid desorption (LD) and column-switching liquid chromatography-mass spectrometry (CS-LC-MS) with solid-phase extraction (SPE). The method required correction by stable isotopically labeled surrogate standards, deuterium 4-tert.-octylphenol (OP-d) and [2H5] 4-(1-methyl)octylphenol (m-OP-d5). A feed sample was homogenized with methanol by ultrasonication. After centrifugation, the supernatant was subjected to extraction for 120 min at room temperature (25 degrees C) using a stir bar coated with polydimethylsiloxane. After the extraction, the analyte was desorbed from the stir bar by LD using acetonitrile. Then, the liquid sample was analyzed by CS-LC-MS with SPE. The average recoveries from laboratory feed samples spiked with OP and NP at 20 ng g(-1) were 99.5 and 103.8%, respectively, with correction using the added surrogate standards. The limits of quantification were 1 ng g(-1) for OP and 5 ng g(-1) for NP in feed sample. The measurement of OP and NP in commercial laboratory animal feed samples resulted in the detection of sub ng g(-1) NP     

改进的氧瓶燃烧法结合电感耦合等离子体质谱快速测定茶叶样品中的稀土元素含量

建立了电感耦合等离子体质谱法快速测定茶叶中Y~Lu共15种稀土元素的新方法,样品处理基于改进的氧瓶燃烧法,以涂覆甘油的石英布代替滤纸作为引燃和燃烧载体,在500 mL容积燃烧瓶中实现了0.1 g样品量的有氧完全燃烧。系统优化了样品处理关键参数,以5 mL 4％ HNO3+1％ HF(V/V)组合试剂超声提取燃烧残渣1 min,稀土元素回收率大于90％,样品总处理周期小于3 min。6次样品平行测定值的相对标准偏差(RSD)在2.7％~5.5％之间,方法检出限(3σ)在0.001~0.006 mg/kg之间。采用本方法对3种茶叶标准参考物质进行分析,测定结果和标准值吻合良好。     

高效液相色谱-三重四极杆质谱法测定面粉中7种荧光增白剂

建立了高效液相色谱-三重四极杆质谱(HPLC-MS/MS)测定面粉中7种荧光增白剂(FWAs)的分析方法。在样品中加入30 mL乙酸乙酯,超声提取10 min,离心后在40℃下氮吹浓缩,用乙腈定容后,上机检测。选用Phenomenex Kinetex C18色谱柱(100 mm×2.1 mm,2.6μm)分离,以0.1%(v/v)甲酸-乙腈和水为流动相进行梯度洗脱,采用电喷雾离子(ESI)源,在正离子、多反应监测(MRM)模式下进行扫描,外标法定量。7种荧光增白剂在各自范围内线性关系良好,相关系数均大于0.99,检出限(S/N=3)为0.50~2.65μg/kg,定量限(S/N=10)为1.60~8.80μg/kg;在3个添加水平下的平均加标回收率为64.8%~117.5%,相对标准偏差(n=6)为0.9%~14.4%。该方法操作简单、回收率高、精密度好,适于面粉中7种荧光增白剂的测定。     

高效液相色谱法同时测定防晒类化妆品中15种紫外线吸收剂

建立了一种反相高效液相色谱同时测定防晒类化妆品中15种紫外线吸收剂的分析方法。化妆水、乳液、膏霜和蜡质样品中首先加入四氢呋喃(含2 g/L氢氧化铵),涡旋、振荡、混匀(若蜡质样品仍分散不完全,可超声振荡加热至50 ℃),再加入80%(v/v)甲醇水溶液振荡混匀、超声提取、离心、过滤后,采用XTerra MS C₁₈柱分离,经水(含0.1%(v/v)甲酸)和甲醇(含0.1%(v/v)甲酸)梯度洗脱,以二极管阵列检测器检测,检测波长为280 nm和311 nm,外标法定量。实验中对不同基质类型样品的前处理条件(样品分散溶剂、萃取溶剂和萃取时间等)进行了重点优化。结果表明,15种紫外线吸收剂在各自的线性范围内呈良好的线性关系(r²≥0.9991),方法的定量限为1.2~5.1 μg/g,在低、中、高3个添加水平下的回收率为84.2%~100.7%,相对标准偏差(RSD)为0.9%~9.5%。该分析方法分离效果好、灵敏度高、定量准确,可用于防晒类化妆品的实际检测。