Biosorption of reactive dye from aqueous media using Saccharomyces cerevisiae biomass. Equilibrium and kinetic study

The biosorption Brilliant Red HE-3B reactive dye by nonliving biomass, Saccharomyces cerevisiae, in batch procedure was investigated. Equilibrium experimental data were analyzed using Freundlich, Langmuir and Dubinin — Radushkevich isotherm models and obtained capacity about 104.167 mg g^?1 at 20°C. The batch biosorption process followed the pseudo-second order kinetic model. The multi-linearity of the Weber-Morris plot suggests the presence of two main steps influencing the biosorption process: the intraparticle diffusion (pore diffusion), and the external mass transfer (film diffusion). The results obtained in batch experiments revealed that the biosorption of reactive dye by biomass is an endothermic physical-chemical process occurring mainly by electrostatic interaction between the positive charged surface of the biomass and the anionic dye molecules. The biosorption mechanism was confirmed by FT-IR spectroscopy and microscopy analysis      

Silver sorption on acrylic copolymers functionalized with amines. Equilibrium and kinetic studies

The sorption capacity of three weak base ion exchangers based on acrylic copolymers functionalized with ethylenediamine, triethylenetetramine and N, N- dimethylamino propylamine for Ag(I) ions was evaluated. Adsorption experiments were carried out by batch method. The effect of pH, crosslinking degree of copolymers, amount of sorbent, initial ion concentration, contact time and temperature was studied. The parameters which characterize the retention process were estimated using Langmuir and Freundlich isotherm models, the best fitting being for the first model. Kinetic data were fitted to pseudo-first order, pseudo-second order and intraparticle diffusion models. Experimental data were in good agreement with the pseudo second order.      

Removal of reactive dye brilliant red HE-3B from aqueous solutions by hydrolyzed polyacrylonitrile fibres: equilibrium and kinetics modelling

A cheap and efficient fibrous hydrolyzed polyacrylonitrile (HPAN) sorbent was obtained by alkaline hydrolysis of Romanian polyacrylonitrile fibres. Scanning electronic microscopy and infrared spectroscopy were used to characterize the hydrolyzed product and to confirm its functionalization. The adsorptive potential of the proposed sorbent for reactive dye Brilliant Red HE-3B removal from aqueous solutions of pH=2 was examined by the batch technique as a function of dye concentration, temperature solution and contact time. The Freundlich, Langmuir and Dubinin-Radushkevich adsorption models were applied to describe equilibrium sorption data and to determine the corresponding isotherm constants. The thermodynamic parameters ΔG, ΔH and ΔS were also determined; the values obtained show that sorption of reactive dye on HPAN fibres is a spontaneous, endothermic and entropy-driven process. The kinetics of sorption of the reactive dye were analyzed using pseudo-first order and pseudo-second order kinetic models. The kinetic data fitted well to pseudo-second order kinetics, indicating the chemisorption of reactive dye onto the fibrous sorbent. The sorption mechanism of the dye onto hydrolyzed fibres was confirmed by FTIR spectroscopy. The dye-loaded HPAN sorbent can be regenerated by treatment with 0.1M NaOH and the regenerated sorbent may be reused in several adsorption-desorption cycles. The results of this study provided evidence that the HPAN fibres are effective for removing reactive dye Brilliant Red HE-3B from aqueous effluents.      

Use of peat-based sorbents for removal of arsenic compounds

It is important to apply sorbent materials for purification of water from arsenic contamination due to serious arsenic pollution worldwide. We have developed new sorbents based on natural materials that provide a cheap and environmentally friendly alternative. For the first time, peat modified with iron compounds and iron humates were tested for sorption of arsenic compounds. The highest sorption capacity was found in peat modified with iron compounds. We have found that sorption of different arsenic speciation forms was strongly dependent on solution pH, reaction time and temperature. Calculations of the sorption process using thermodynamic parameters indicate the spontaneity of sorption process and its endothermic nature. Sorption kinetics showed that most arsenates are removed within 2 hours, and the kinetics of arsenate sorption on modified peat can be described by the pseudo-second order mechanism.      

New carbon from low cost vegetal precursors: acorn and cypress cone

Thermal-treated carbons from acorn and cypress cone were prepared and characterized. The uptakes of heavy metal ions (Ag⁺, Cd²⁺ and Cr⁺³) and organics (phenol, methylene blue and sodium dodecylbenzenesulfonate) from aqueous solution have been studied. Effects of activation by HCl and HNO₃ acids on the sorption properties of these carbons were investigated by mass titration, sorption isotherms, IRS, SEM and XRS. The models of Langmuir and Freundlich do not represent our sorption data very well. An earlier proposed empirical correlation is applied successfully to carry out a parameter of comparison between the studied carbons. The acidic treatment changes the surface chemical properties of the two thermal-treated carbons lowering their sorption performances. The carbons show good capacities to uptake metals, phenol and methylene blue, but sodium dodecylbenzenesulfonate is removed from its solutions to minor extent. The up-taking properties are found similar to those of two worldwide used commercial grade carbons.      

The use of ultrasonic treatment for improvement of metrological performance of sorption atomic absorption determination of lead(II) and cadmium(II) traces

The optimal parameters for ultrasonic treatment (frequency 200–300 kHz, intensity 2–4 W cm^?2) were obtained to intensify Pb(II) and Cd(II) sorption concentration by carbon sorbent from apricot pit. The combined action of ultrasonic frequency of 18 kHz and 1 MHz on concentrate slurry increases its sedimentation stability from 3 to 180 minutes and decreases S_r value up to 7% at Pb(II), Cd(II) hybrid sorption atomic absorption determination in natural waters, brines, common salt.      

Enantioselective inhibition of immobilized acetylcholinesterase in biosensor determination of pesticides

Chiral effects for the inhibition of acetylcholinesterase by organophosphorus pesticides were investigated for insecticide malathion and malaoxon, which is a metabolic product of malathion in living organisms. Studies were carried out using a bienzymatic biosensor with immobilized acetylcholinesterase, choline oxidase, and with Prussian Blue used as a mediator. In both cases the R enantiomers accelerate acetylocholinesterase inhibition. The chiral effect in inhibition was much more pronounced in fast flow measurements than in batch measurements.      

Adsorption studies and release of selected dyes from functionalized mesoporous MCM-41 silica

Functionalized mesoporous MCM-41 silica was subjected to adsorption and release studies of encapsulated guest molecules of three chosen dyes. These mesoporous systems were composed of three different capping reagents introduced by grafting method on the silica surface to control the release of dye molecules at two different pH values. The amounts of dyes adsorbed on the silica surface were measured using ultraviolet-visible (UV-VIS) spectrophotometry. The efficiency of grafting was calculated on the basis of differential thermal analysis (TG) results and elemental analysis. The release profiles were determined for all obtained systems using USP Dissolution Apparatus 2. Adsorption of the two azo dyes used was the most efficient after the positively charged functionalization and lower after functionalization with neutral and negatively charged capping reagents, while the phthalocyanine dye adsorption was almost functionalization-independent. Grafting efficiency was the highest for neutral capping reagent and much lower for electrically charged molecules of other reagents. Release studies showed clearly that desorption was pH-dependent for azo dyes and pH independent for Alcian Blue. The adsorption and release seem to be connected with the electrical charge of all constituents of these systems. Results obtained can be used for further analysis of different electrically charged molecules.      

Mechanical, thermal and surface properties of polyacrylamide/dextran semi-interpenetrating network hydrogels tuned by the synthesis temperature

The mechanical, rheological, thermal, and surface behaviors of three polyacrylamide/dextran (PAAm/Dx) semi-interpenetrating polymer network (semi-IPN) hydrogels, prepared at 22°C, 5°C and ?18°C, were investigated. The results were compared with those obtained on cross-linked PAAm without Dx synthesized under the same conditions. Hydrogels prepared at the lowest temperature were the most mechanically stable. The thermal stability of the semi-IPN hydrogels is slightly lower than the corresponding PAAm gels, irrespective of preparation temperature. The water vapor sorption capacity depended on the presence of Dx as well as preparation temperature, which determines the network morphology.      

Activated carbon from bamboo waste modified with iron and its application in the study of the adsorption of arsenite and arsenate

Activated carbon obtained from bamboo waste was synthesised and modified with iron (BAC-Fe) and used for the removal of arsenic from aqueous solutions. Two different adsorption models were used for analysing the data. The adsorption capacities were determined for BAC-arsenite, BAC-Fe-arsenite, BAC-arsenate and BAC-Fe-arsenate, with a qmax (μg g^?1) of 14.89, 19.19, 22.32 and 27.32 respectively. Adsorption capacity varied as a function of pH and modifications to the sorbent. Adsorption isotherms from an aqueous solution of arsenite and arsenates on activated carbons were determined. These adsorption isotherms were consistent with the Langmuir and Freundlich adsorption models. Adsorption kinetics followed a pseudo-first order rate equation, as did the kinetics for BAC-Fe-arsenite and BAC-Fe-arsenate adsorption.      

Surface tension study of cationic gemini surfactants binding to DNA

Binding of cationic gemini surfactants alkanediyl-a-ω-bis(dimethyldodecylammonium bromides) with variable polymethylene spacer length ranging from 2 to 12 methylene groups to DNA in NaBr solution is investigated utilizing the tensiometry method. A simple method is presented for calculating the number of surfactant molecules bound to DNA. The results are evaluated in terms of the gemini surfactant spacer length, showing that gemini molecules with either short spacers (2 methylene groups) or long spacers are most efficiently adsorbed to DNA. A weak adsorption to DNA was found for gemini molecules with a medium spacer length (6 methylene groups in the spacer). The binding properties of cationic gemini surfactants as a function of spacer length are consistent with the results obtained by other experimental methods (dynamic light scattering measurements, fluorescence spectroscopy), indicating identical adsorption behaviour of gemini molecules as a function of the spacer length.      

Sorption of Bi3+ from acidic solutions using nano-hydroxyapatite extracted from Persian corals

Nano-crystallite hydroxyapatite (nano-HAp) synthesized from Persian corals was used for removing Bi³⁺ from acidic aqueous solutions. The effects of initial concentration, adsorbent dosage, contact time and temperature were studied in batch experiments. The sorption of Bi³⁺ by nano-HAp increased as the initial concentration of bismuth ion increased in the medium. The pseudo-first-order, pseudo-second-order and intraparticle diffusion kinetic models were applied to study the kinetics of the sorption processes. The pseudo-second-order kinetic model provided the best correlation (R ² > 0.999) of the used experimental data compared to the pseudo-first-order and intraparticle diffusion kinetic models. Various thermodynamic parameters, such as $ \Updelta G^\circ $ , $ \Updelta H^\circ $ and $ \Updelta S^\circ $ were calculated. Thermodynamics of Bi³⁺ cation sorption onto nano-HAp system pointed at spontaneous and endothermic nature of the process. The maximum Bi³⁺ adsorbed was found to be 3,333.33 mg g^?1. It was found that the sorption of Bi³⁺ on nano-HAp correlated well (R ² = 0.979) with the Langmuir equation as compared to Freundlich and Dubinin–Kaganer–Radushkevich (D-K-R) isotherm equations under the concentration range studied. This study indicated that nano-HAp extracted from Persian corals could be used as an efficient adsorbent for removal of Bi³⁺ from acidic aqueous solution.     

Formation of amyloid-like aggregates through the attachment of protein molecules to a Congo red scaffolding framework ordered under the influence of an electric field

This study describes a technique which makes it possible to introduce the amyloid-like order to protein aggregates by using the scaffolding framework built from supramolecular, fibrillar Congo red structures arranged in an electric field. The electric field was used not only to obtain a uniform orientation of the charged dye fibrils, but also to make the fibrils long, compact and rigid due to the delocalization of pi electrons, which favors ring stacking and, as a consequence, results in an increased tendency to self-assemble. The protein molecules (immunoglobulin L chain lambda, ferritin) attached to this easily adsorbing dye framework assume its ordered structure. The complex precipitating as plate-like fragments shows birefringence in polarized light. The parallel organization of fibrils can be observed with an electron microscope. The dye framework may be removed via reduction with sodium dithionite, leaving the aggregated protein molecules in the ordered state, as confirmed by X-ray diffraction studies.      

Equilibrium sorption of C.I.Basic Red 18 by carboxymethyl cellulose membranes

The equilibrium sorption of a cationic dye, C.I.Basic Red 18, by a partially carboxymethylated cellulose membrane at pH 4.2 was investigated. The sorption isotherm was interpreted by considering a cooperative mode of binding of the dye by the polymer. The intrinsic binding constantK, the number of consecutive polymer residues occupied by a single dye moleculen, and the cooperativity parameter were determined. In the case of the polymer with high content of carboxylate groups an additional mode of dye binding was presumed.     

Remazol Black B removal from aqueous solutions and wastewater using weakly basic anion exchange resins

In this study, the use of the weakly basic anion exchange resins of phenol-formaldehyde (Amberlyst A 23), polyacrylate (Amberlite IRA 67) and polystyrene (Lewatit MonoPlus MP 62) matrices for removal of the reactive dye Remazol Black B (RBB) from aqueous solution and wastewater were investigated. RBB sorption on the anion exchangers was a time dependent process. Color reduction percentiles of 75.2, 33.9 and 25.1% in wastewater treatment were found after 216 h of phase contact time with Lewatit MonoPlus MP 62, Amberlyst A 23 and Amberlite IRA 67, respectively. Inorganic salts and anionic surfactant action influenced RBB uptake by the anion exchangers. The amounts of dye retained by the anion exchangers increased with a rise in temperature. The maximum sorption capacities calculated from the Langmuir model were 66.4, 282.1 and 796.1 mg g⁻¹ for Amberlite IRA 67, Amberlyst A 23 and Lewatit MonoPlus MP 62, respectively. Regeneration of phenol-formaldehyde and polystyrene resins were possible using 1 M NaOH, 2 M KSCN, 1M KSCN in 40–60% methanol as well as 1 M NaOH in 60% methanol.      

Removal of zinc ions as zinc chloride complexes from strongly acidic aqueous solutions by ionic exchange

The aim of this study was to compare several anion exchangers and to investigate the capacity of Amberlite IRA410 to remove zinc as chloride [ZnCl₃]^? from hydrochloric solutions (1 M). Influence of the process parameters such as stirring rate, resin quantity and zinc initial concentration over the removal process, was considered. The highest experimental ionic exchange capacity between the considered anionic exchangers, in the same working conditions (500 rpm, 5 g resin and 500 mg L^?1), was obtained for Amberlite IRA410, 8.34 mg g^?1. With an increase of zinc ions concentration, ionic exchange capacity increased up to 19.31 mg g^?1 (1100 mg L^?1). The experimental data were analysed using Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherm models. The results were also analyzed using sorption kinetics models, pseudo-first-, pseudo-second-order, intra-particle and film diffusion models. From the Dubinin-Radushkevich and Temkin isotherm models the mean free energy and heat of sorption were calculated to be 7.45 kJ mol^?1, respectively 1×10^?4 kJ mol^?1, which indicates that zinc sorption is characterized by a physisorption process. Kinetic studies showed that the adsorption followed a pseudo-second-order kinetic model.     

Preparation of selectively protected protoescigenin derivatives for synthesis of escin analogs and neoglycoconjugates

Protoescigenin, the main aglycone of horse chestnut saponin mixture known as escin, was selected as substrate for exploratory chemistry towards selective protection, followed by propargyl ether formation and subsequent condensation with azido-monosaccharides, to obtain novel triazole linked conjugates of the triterpene.      

Modeling and optimizing of sonochemical degradation of Basic Blue 41 via response surface methodology

The nanocatalyst-assisted sonodegradation of Basic Blue 41 (BB41) dye in aqueous medium was modeled and optimized using response surface method (RSM) based on Box-Behnken design. The studied variables included pH, initial dye concentration, H₂O₂ concentration and sonolysis time while each factor varied at three levels: Low level (−1), Medium level (0) and High level (+1). The ultrasound -assisted degradation was well described by developing quadratic model with correlation value squared (R²) of 0.9114. Factor effects along with interaction effects were evaluated. The graphical optimization step was conducted to achieve the best experimental condition in dye removal. pH, H₂O₂ concentration and initial dye concentration of the reaction were investigated. It was recognized that at lower pH values the dye removal rate decreased. However, dye removal rate increased (82.5%) by increasing the concentration of H₂O₂ and by lowering the initial dye concentration.