Debromination of 2,4,6-tribromophenol coupled with biodegradation

The application effect of aluminium and their alloys and mixtures with nickel was studied for the complete hydrodebromination of 2,4,6-tribromophenol (TBP) to phenol in aqueous NaOH solution at room temperature. It was found that the Raney Al-Ni alloy can rapidly transform TBP to phenol. Removal efficiency of 25 mM TBP solution in aqueous NaOH (15 g L^?1) solution at the end of 1h reaction was 100% using 4 g L^?1 Al-Ni. The hydrodebromination is accompanied by the dissolution of aluminium and formation of soluble Al(OH)₄ ^?1 anions under these reaction conditions. After completion of the hydrodebromination reaction removal of the dissolved metals was achieved by precipitation of appropriate hydroxides by adjustment of the pH value and filtration, the filtrate was treated with Pseudomonas or Rhodococcus bacterial strains to degrade dissolved phenol. The combined application of both (chemical-biological) treatments produced degradations of 100% of aromatic compounds.      

Synthesis,characterization and controlled toxicity of a novel hybrid material based on cisplatin and docetaxel

This paper is focused on the synthesis and characterization of a novel hybrid material based on cisplatin and docetaxel-loaded functionalized simultanously carbon nanotubes able to be used in cancer therapy as drug delivery system with controlled toxicity. This material was physico-chemically investigated by determining the structure, as evidenced by Fourier transform infrared (FTIR) spectroscopy, transmission electronmicroscopy (TEM) and its stability was studied with the aid of thermogravimetric analysis (TGA). The amount of platinum ions released into the solution of simulated body fluid (SBF) was highlighted by coupled plasma mass spectrometry (ICP-MS). Toxicology experiments were performed with MDA-MB 231 breast cancer epithelial cells. The performance of the new drug delivery hybrid material was compared with functionalised carbon nanotubes with therapeutic agents functionalized with a single therapeutic agent.      

Preparation of selectively protected protoescigenin derivatives for synthesis of escin analogs and neoglycoconjugates

Protoescigenin, the main aglycone of horse chestnut saponin mixture known as escin, was selected as substrate for exploratory chemistry towards selective protection, followed by propargyl ether formation and subsequent condensation with azido-monosaccharides, to obtain novel triazole linked conjugates of the triterpene.      

The first synthesis of 3-deoxyoripavine and its utilization in the preparation of 10-deoxyaporphines and cyprodime

The synthesis of 3-deoxyoripavine (7) was realized as a novel and promising intermediate towards the synthesis of the important class of dopaminergic and/or serotonergic 10-deoxyaporphines and the special pharmacological tool µ opioid antagonist cyprodime. Generally, the preparation of these valuable biologically active compounds was achieved in remarkable yields.      

Enantioselective Michael additions of aldehydes to nitroalkenes catalyzed with ionically tagged organocatalyst

Enantioselective organocatalytic Michael additions affords useful building blocks for many biologically and medicinally relevant compounds. Ionically-tagged diphenylprolinol silyl ether efficiently catalyzes several Michael additions of aldehydes to nitroalkenes in ionic liquids. The Michael additions work well in ionic liquids; yields up to 95% and enantioselectivities up to 95% ee were achieved. Furthermore, in some cases, the catalytic system was reusable.      

Polymer conjugates with potential biological activity based on new derivatives of 2-mercaptobenzoxazole-synthesis and characterization

New potentially biologically active compounds derived from 2-mercapto-benzoxazole were synthesized and coupled on polymeric support of poly (maleic anhydride-alt-vinyl acetate) for the preparation of polymer-drug conjugates with controlled drug release. All compounds were characterized by elemental and spectroscopy (FT-IR, ¹H-NMR) analysis. The toxicological tests recommend the products for further laboratory screening.      

Application of positron spectroscopy for investigation of threshold space of oil-gas rocks

This article considers the possibility of applying the positron annihilation spectroscopy method for investigating the pore space of rocks from oil-gas and methane-coal deposits. The diagnostics of the structure was performed using the method of spectrometry of angular correlation of annihilation rays (ACAR). Using the samples of porous silicon, the authors have shown the applicability of the ACAR method for determination of the average dimensions of spherical and cylindrical nanosized objects and their concentration      

Physical-chemical transformations in the system V2O5/(NH4)2Mo2O7 under hydrothermal conditions

Modified compositions in the system V₂O₅/(NH₄)₂Mo₂O₇ have been prepared by means of mechanochemical, hydrothermal, microwave and ultrasonic treatments in aqueous medium. Chemical and phase transformations occurring on the stages of modification and following calcinations have been studied with the help of XRD, DTA-TG, FTIR and UV-Vis spectroscopy, nitrogen adsorption, and SEM. It has been established that precursors of catalytically active phases possessing meso-macroporous structure have been formed during modification. The comparison of the properties of compositions prepared via different methods has been carried out. Particularly, precursors modified via various procedures possess different morphology.      

Aerobic oxidation of cumene catalysed by 4-alkyloxycarbonyl-N-hydroxyphthalimide

4-Hexyloxycarbonyl-, 4-dodecyloxycarbonyl- and 4-hexadecyloxycarbonyl-N-hydroxyphthalimides were synthesised using trimellitic anhydride chloride as the starting material. The obtained lipophilic derivatives of N-hydroxyphthalimide were applied as catalysts of the cumene oxidation reaction with oxygen performed in polar acetonitrile, in non-polar tert-butylbenzene and in the absence of a solvent. The courses of reactions catalysed by N-hydroxyphthalimide and its derivatives were compared.      

Metals content of soil,leaves and wild fruit from Serbia

The concentrations of Zn, Mn, Fe, Pb, Ni, Cu and Cd in soil, leaves and edible wild fruit (Crataegus laevigata L., Cornus mas L. and Prunus spinosa L.) from southeast Serbia were determined by atomic absorption spectroscopy. Metal translocations from soil to fruit were calculated as well as their oral intake and health risk indices. Positive correlations were found among metal concentrations in soil, leaves and fruit.      

Activated carbon from bamboo waste modified with iron and its application in the study of the adsorption of arsenite and arsenate

Activated carbon obtained from bamboo waste was synthesised and modified with iron (BAC-Fe) and used for the removal of arsenic from aqueous solutions. Two different adsorption models were used for analysing the data. The adsorption capacities were determined for BAC-arsenite, BAC-Fe-arsenite, BAC-arsenate and BAC-Fe-arsenate, with a qmax (μg g^?1) of 14.89, 19.19, 22.32 and 27.32 respectively. Adsorption capacity varied as a function of pH and modifications to the sorbent. Adsorption isotherms from an aqueous solution of arsenite and arsenates on activated carbons were determined. These adsorption isotherms were consistent with the Langmuir and Freundlich adsorption models. Adsorption kinetics followed a pseudo-first order rate equation, as did the kinetics for BAC-Fe-arsenite and BAC-Fe-arsenate adsorption.      

Use of peat-based sorbents for removal of arsenic compounds

It is important to apply sorbent materials for purification of water from arsenic contamination due to serious arsenic pollution worldwide. We have developed new sorbents based on natural materials that provide a cheap and environmentally friendly alternative. For the first time, peat modified with iron compounds and iron humates were tested for sorption of arsenic compounds. The highest sorption capacity was found in peat modified with iron compounds. We have found that sorption of different arsenic speciation forms was strongly dependent on solution pH, reaction time and temperature. Calculations of the sorption process using thermodynamic parameters indicate the spontaneity of sorption process and its endothermic nature. Sorption kinetics showed that most arsenates are removed within 2 hours, and the kinetics of arsenate sorption on modified peat can be described by the pseudo-second order mechanism.      

Preparation and phenol-recognizing ability of a poly(methacrylic acid) molecular imprint on the surface of a silica gel

Molecularly imprinted solid phase extraction is an excellent tool for the preconcentration of trace analytes. We report on the preparation of such a material by firstly graft-polymerizing methacrylic acid onto the surface of silica gel particles, and then imprinting it by using phenol as a template and ethylene glycol diglycidyl ether as a crosslinker. The binding and recognition of phenol were examined by static methods. The binding capacity at saturation is 160?mg·g^?1 in 9?h at pH 6. The selectivity coefficients relative to o-cresol and chlorophenol are 22 and 23, respectively. The pH value has a large effect. Adsorbed phenol can be eluted easily from the imprint with diluted sodium hydroxide solution, and the material is reusable.

Controlled pesticide release from biodegradable polymers

Polymers have been widely used in agriculture for applications including controlled release of pesticides and other active ingredients. The ability to predict their delivery helps avoid environmental hazards. Macromolecular matrices used as carriers in controlled release of agricultural active agents, especially pesticides, are reviewed. The review focuses on the advantages and mechanisms of controlled release. It includes biodegradable polymers in agriculture, their manufacturing methods, and their degradation mechanisms and kinetics. The article also presents a critical account of recent release studies and considers upcoming challenges.      

Magnetic resonance study of annealed and rinsed N-doped TiO2 nanoparticles

Nanoparticles of nitrogen-modified TiO₂ (N-doped TiO₂) calcined at 300°C and 350°C, have been prepared with and without water rinsing. Samples were characterized by x-ray diffractrometry (XRD) and optical spectroscopy. The electron paramagnetic resonance (EPR) spectra from centers involving oxygen vacancies were recorded for all samples. These could be attributed to paramagnetic surface centers of the hole type, for example to paramagnetic oxygen radicals O^?, O₂ ^? etc. The concentration of these centers increased after water rising and it further increased for samples annealed at higher temperature. Additionally, for samples calcined at 300°C, and calcined at 350°C and rinsed, the EPR spectra evidenced the presence of magnetic clusters of Ti³⁺ ions. The photocatalytic activity of samples was studied towards phenol decomposition under unltraviolet-visible (UV-Vis) irradiation. It was found that, in comparison to the starting materials, the rinsed materials showed increased photocatalytic activity towards phenol oxidation. The light absorption (UV-Vis/DRS) as well as surface Fourier transform infrared/diffuse reflectance spectroscopy (FTIR/DR) studies confirmed a significantly enhanced light absorption and the presence of nitrogen groups on the photocatalysts surfaces, respectively. A significant increase of concentration of paramagnetic centers connected with oxygen vacancies after water rising has had an essential influence on increasing their photocatalytic activity.      

Electokinetic and adsorption properties of different titanium dioxides at the solid/solution interface

Six samples of titanium dioxide of different phase compositions and specific surface areas have been characterized by XRD, Raman-and FTIR spectroscopy, adsorption of nitrogen, electrophoresis. Adsorption of Zn(II) ions at the TiO₂/NaCl aqueous solution interface as well as the effect of adsorption on the structure of electrical double layer have been studied. The influence of ionic strength, pH and presence of ions on the adsorption of Zn(II) ions at the TiO₂/NaCl solution interface have also been investigated. The zeta potential, surface charge density, parameters of adsorption edge pH_50% and ΔpH_10–90% for different concentrations of basic electrolyte have been determined. Studied unpurified samples showed lower values of isoelectric point pH_iep compared with literature data due to the presence of anion impurities. The antibate dependence between pH_iep values and particle size has been established. Adsorption of Zn(II) ions using monophase samples is completed at a lower pH than for the biphase TiO₂. Appearance of the point CR3 is associated with the charge turnover from positive to negative at high values of pH and formation of Zn(OH)₂.      

Application of UV detection in HPLC in the total antioxidant potential assay

HPLC has been already used for the TAP estimation. Phenylalanine, salicylic, p-hydroxybenzoic (pHBA) or terephthalic (TPA) acids have been used as sensor compounds. Products of their reaction with the hydroxyl radicals, generated in the Fenton-like reaction, were analyzed using electrochemical or fluorescence detection. This paper describes the TAP assay based on the hydroxyl radicals reaction with pHBA, reversed-phase-HPLC separation and UV photometric detection. The elaborated assay has been used to evaluate TAP values of some apiculture products.      

Application of NRTL activity coefficient model to describe the kinetics of gas adsorption

The Non-Random Two-Liquid activity coefficient model is applied to describe the kinetics of pure gas adsorption on energetically heterogeneous solid surfaces. The surface energetic heterogeneity has been represented by the Gaussian-like function of the adsorption energy distribution. Two different kinetic isotherms have been presented. One of them, determined by using the statistical rate theory, has been critically discussed. The applicability of the presented approach has been demonstrated by a quantitative analysis of two sets of experimental data previously reported in the literature.      

Synthesis and biological screening of octasubstituted-triphenodioxazines and its sulphur analogues with some novel intermediates

Attempts have been made to prepare for the first time the octasubstituted-triphenodioxazines and triphenodithiazines heterocycles by cyclisation of 3,6-dichloro-2,5-bis(2′,4′,5′-trichloroanilino)-1,4-benzoquinone and condensation. This wasfollowed by cyclisation of substituted 2-aminobenzenethiol respectively with chloranil and bromanil in ethanolic solution of fused sodium acetate in the presence of benzoyl chloride in nitrobenzene. Their structures were confirmed on the basis of their chemical and spectral analyses. Moreover, the biological activity of these compounds was evaluated against the test organisms viz — E.coli, S. aureus, B. subtilis, M.luteus and C. albicans. These compounds synthesized from 2,4,5-trichloroaniline appeared to possess significant antimicrobial activities and an explicit correlation between structure and biological activity was also observed.      

Formation of the dispersed phase in mixed solutions of chitosan and magnesium sulfate

Specific features of formation and the composition and characteristics of dispersed phase particles in mixed dilute solutions of chitosan and magnesium sulfate, containing no surfactants, were studied. The component molar ratio, \(\nu _{SO_4 } :\nu _{NH_2 }\) , is the factor exerting the strongest influence on the formation rate and characteristics of chitosan sulfate particles. With an increase in the fraction of sulfate ions in the initial solution, the particle size decreases and their ζ-potential increases. The \(\nu _{SO_4 } :\nu _{NH_2 }\) molar ratio in chitosan sulfate particles only slightly depends on the composition of the initial mixed solution and varies within 0.40–0.44.