Control of the EOF in CE using polyelectrolytes of different charge densities

The control of the EOF direction and magnitude remains one of the more challenging issues for the optimization of separations in CE. In this work, we investigated the possibility to use variously charged polyanions for a fine-tuning of the EOF using polyelectrolyte multilayers. For that purpose, polyanions of poly(acrylamide-co-2-acrylamido-2-methyl-1-propanesulfonate) (PAMAMPS) with different chemical charge rates varying between 3 and 100% were used. These copolymers are statistic hydrophilic copolymers of acrylamide (AM) and 2-acrylamido-2-methyl-1-propanesulfonate (AMPS). The study of the influence of the chemical charge rate (AMPS molar proportion in the copolymer) on the electroosmotic mobility (mu(eo)) of a capillary modified by a polyelectrolyte bilayer (polycation/PAMAMPS) revealed that the fine-tuning of the EOF was possible, at least for cathodic or slightly anodic EOF (micro(eo) from -5 x 10(-5) to +35 x 10(-5) cm(2)V(-1)s(-1)). Electroosmotic mobility values were compared with the free-draining electrophoretic mobilities of the PAMAMPS constituting the last layer of the capillary coating. The stability of the EOF is discussed in detail on the basis of successive determinations of electroosmotic mobility and migration times. The application to the separation of a model peptide mixture demonstrated the interest (and the simplicity) of this approach for optimizing resolution and analysis time. Experimental resolutions were compared to the theoretical ones that we would obtain on a fused-silica capillary having the same EOF as the coated capillary.     

Surfactant-induced electroosmotic flow in microfluidic capillaries

Control of EOF in microfluidic devices is essential in applications such as protein/DNA sizing and high‐throughput drug screening. With the growing popularity of poly(methyl methacrylate) (PMMA) as the substrate for polymeric‐based microfludics, it is important to understand the effect of surfactants on EOF in these devices. In this article, we present an extensive investigation exploring changes in EOF rate induced by SDS, polyoxyethylene lauryl ether (Brij35) and CTAB in PMMA microfluidic capillaries. In a standard protein buffer (Tris‐Glycine), PMMA capillaries exhibited a cathodic EOF with measured mobility of 1.54 ± 0.1 (× 10^?4 cm²/V.s). In the presence of surfactant below a critical concentration, EOF was independent of surfactant concentration. At high concentrations of surfactants, the electroosmotic mobility was found to linearly increase/decrease as the logarithm of concentration before reaching a constant value. With SDS, the EOF increased by 257% (compared to buffer), while it was decreased by 238% with CTAB. In the case of Brij35, the electroosmotic mobility was reduced by 70%. In a binary surfactant system of SDS/CTAB and SDS/Brij35, addition of oppositely charged CTAB reduced the SDS‐induced EOF more effectively compared to nonionic Brij35. We propose possible mechanisms that explain the observed changes in EOF and zeta potential values. Use of neutral polymer coatings in combination with SDS resulted in 50% reduction in the electroosmotic mobility with 0.1% hydroxypropyl methyl cellulose (HPMC), while including 2% poly (N,N‐dimethylacrylamide) (PDMA) had no effect. These results will potentially contribute to the development of PMMA‐based microfluidic devices.     

Characterization of SU-8 for electrokinetic microfluidic applications

The characterization of SU-8 microchannels for electrokinetic microfluidic applications is reported. The electroosmotic (EO) mobility in SU-8 microchannels was determined with respect to pH and ionic strength by the current monitoring method. Extensive electroosmotic flow (EOF), equal to that for glass microchannels, was observed at pH > or =4. The highest EO mobility was detected at pH > or =7 and was of the order of 5.8 x 10(-4) cm(2) V(-1) s(-1) in 10 mM phosphate buffer. At pH < or =3 the electroosmotic flow was shown to reverse towards the anode and to reach a magnitude of 1.8 x 10(-4) cm(2) V(-1) s(-1) in 10 mM phosphate buffer (pH 2). Also the zeta-potential on the SU-8 surface was determined, employing lithographically defined SU-8 microparticles for which a similar pH dependence was observed. SU-8 microchannels were shown to perform repeateably from day to day and no aging effects were observed in long-term use.     

Determination of uric acid in human serum by capillary electrophoresis with polarity reversal and electrochemical detection

Capillary zone electrophoresis (CE) under conditions of reversed polarity is used in conjunction with electrochemical detection (EC) at carbon fiber microcylinder electrodes for the selective and sensitive determination of uric acid in human blood serum. Comigration of anions with the electroosmotic flow is accomplished with reversed polarity and the buffer additive cetyltrimethylammonium bromide (CTAB) in a 2-(N-morpholino)ethanesulfonic acid (MES) buffer system, giving rise to rapid and sensitive analyses. Optimal buffer conditions (pH 7.0), detection potential (0.80 V vs. Ag/AgCl), and electrokinetic injection are employed to allow for maximal resolution and signal intensity. Amperometric end-column detection with a carbon fiber microcylinder electrode results in lower limits of detection for uric acid of about 25 nM (ca. 140 amol injected) without the need for decoupling. Linear calibration plots using uric acid standards in water and serum are obtained over a linear range from 5.00 x 10(-4) M to 2.50 x 10(-7) M. Uric acid concentrations obtained for human sera using the CE-EC approach described here are shown to compare favorably to the accepted laboratory values.     

一种直接测定微流控芯片电渗流速度的新方法

随着微芯片技术的成熟,越来越迫切地需要有一个准确而简洁的电渗流速度的检测方法。根据荧光物质罗丹明123（Rh123）在不同pH缓冲溶液中迁移时间的变化,推导出Rh123在pH 9和10条件下分别有中性分子存在,而中性分子的移动速度等于电渗流速度,因此建立了直接以Rh123中性分子为标记物测定电渗流速度的方法。通过直接检测Rh123中性分子的迁移时间,计算得出所用玻璃微流控芯片在pH 9.3和pH 10.1的电渗流速度为3.9×10-4 cm2/(s·V)和4.1×10-4 cm2/(s·V),与经典方法对照无明显差异。     

1,3-dialkylimidazolium-based room-temperature ionic liquids as background electrolyte and coating material in aqueous capillary electrophoresis

The 1-ethyl-3-methylimidazolium (EMIM) cation was found to have constant mobility of 4.5 x 10(-4) cm2 V(-1) s(-1) over the pH range of 3 to 11. The electroosmotic flow of bare silica capillary was reversed by the covalently bonded room-temperature ionic liquid (RTIL) coating. With run buffer of 5 mM EMIM (pH 8.5), NH4+ in human urine was separated from the K+ matrix and was detected to be 0.37 +/- 0.012%. K+, Na+, Li+, Ca2+, Mg2+ and Ba2+ were baseline separated in RTIL-coated capillary with run buffer of 10 mM EMIMOH-acetic acid at pH 5, and the concentration of the above ions in a red wine were detected to be 907, 27.9, 0, 71.0, 83.4 and 31.1 microg/ml, respectively. The RTIL-coated capillary showed stable electroosmotic flow for at least 80 h in the run buffer.     

Determination of the absolute mobility and the equivalent ionic conductivity of NpO2+ at 25 degrees C and at infinite dilution by capillary electrophoresis-inductively coupled plasma-mass spectrometry

The absolute mobility of NpO2+ and its equivalent ionic conductivity were extrapolated at 25 degrees C and at infinite dilution using a set of experimental data obtained at various ionic strengths. The separation was carried out by capillary electrophoresis (CE) at various concentrations of creatinine at a pH of 5. The detection of NpO2+ was performed by inductively coupled plasma mass spectrometry coupled on-line with CE. The following values have been found: mu0NpO2+ (25 degrees C) = (2.94 +/- 0.07) x 10(-4) cm2 V(-1) s(-1) and lambda0NpO2+ (x 10(4), 25 degrees C) = 28.3 +/- 0.7 m2 S mol(-1).     

Self-assembled epoxy-modified polymer coating on a poly(dimethylsiloxane) microchip for EOF inhibition and biopolymers separation

A straightforward approach to generate a stable and protein-resistant poly(dimethylsiloxane) (PDMS) surface using self-assembled hydrophilic polymers is demonstrated in this work. Epoxy-modified polymers were directly adsorbed from aqueous solution onto plasma oxidized PDMS based on H-bond interaction, and epoxies of polymer and silanols on oxidized PDMS surface were crosslinked by heating at 110 degrees C. The coating process could be completed within half hour. Poly(dimethylacrylamide-co-glycidyl methacrylate) (PDMA-co-GMA), poly(vinyl pyrrolidone)-g-glycidyl methacrylate (PVP-g-GMA) and poly(vinyl alcohol)-g-glycidyl methacrylate (PVA-g-GMA) (D. P. Wu, B. X. Zhao, Z. P. Dai, J. H. Qin and B. C. Lin, Lab Chip, 2006, 6, 942) were employed as examples here. Unlike PDMA, PVP, and PVA themselves, these epoxy-modified hydrophilic polymers could be directly used as static surface coatings on oxidized PDMS, and inhibited electroosmotic flow (EOF) within pH 3-11. It was also found that hard baking of PDMS at 150 degrees C for 24 hours before surface coating could greatly retard surface hydrophobicity recovery after oxygen plasma exposure, which strengthened epoxy-modified polymer coatings on oxidized PDMS surface, and resulted in EOF less than 0.2 x 10(-4) cm(2) V(-1) s(-1) (pH 9.0) within two weeks. On epoxy-modified polymer coated PDMS microchips, basic proteins, peptides and DNA fragments could be separated satisfactorily, in which more than 2 x 10(4) plates per 2 cm and less than 3% RSD (>8 runs) for migration time were obtained for lysozyme.     

Measurement of electroosmotic flow in plastic imprinted microfluid devices and the effect of protein adsorption on flow rate.

Several commercially available plastic materials were used as substrates in the fabrication of microfluid channels for biochemical analysis. Protocols for fabrication using the wire-imprinting method are reported for polystyrene, polymethylmethacrylate and a copolyester material. Channel sealing was accomplished by low-temperature bonding of a substrate of similar material; therefore, each channel was composed of a single material on all sides. The electroosmotic flow in 25-microm imprinted channels was evaluated for each substrate material. The copolyester material exhibited the highest electroosmotic flow mobility of 4.3 x 10(-4) cm2 V(-1) s(-1) which is similar to that previously reported for fused-silica capillaries. Polystyrene exhibited the lowest electroosmotic flow mobility of 1.8 x 10(-4) cm2 V(-1) s(-1). Plots of linear velocity versus applied electric field strength were linear from 100 V cm(-1) to 500 V cm(-1) indicating that heat dissipation is effective for all substrates in this range. Electroosmotic flow was reevaluated in the plastic channels following incubation in antibody solution to access the non-specific binding characteristics of a common biochemical reagent onto the substrate materials. All materials tested showed a high degree of non-specific adsorption of IgG as indicated by a decrease in the electroosmotic flow mobility in post-incubation testing.     

Silicate glass coated microchannels through a phase conversion process for glass-like electrokinetic performance

The surface modified polydimethylsiloxane (PDMS) microchannels show a much more inferior performance to the durable and reproducible glass chip. In this paper, a facile approach to preparing a silicate glass modified PDMS microchannel for glass-like performance is presented. This glass-like performance is made possible by a phase conversion of a preceramic polymer--allylhydridopolycarbosilane (AHPCS). The, several hundred nanometer thick, polymer that coats the PDMS channel is hydrolyzed to form hydrophilic silicate glass via phase conversion under an aqueous alkali condition. It is characterized by XPS, FTIR-ATR, AFM, and contact angle measurements. The silicate glass coated PDMS channel from AHPCS has an excellent solvent resistance, delivers a high electroosmotic flow (EOF) that is stable in the long-term (4.9±0.1×10(-4) cm(2) V(-1) s(-1)) and a reliable capillary electrophoresis (CE), which are comparable to those of native glass channels. Moreover, the silicate glass PDMS channel allows easy regeneration of the electrokinetic behavior, just as in a glass channel, by a simple treatment with alkali solution. This coating approach can be applied to other polymer substrates such as polyimide (PI).     

高效毛细管电泳分析羊栖菜多糖对肿瘤机体红细胞合淌度的影响

为了分析羊栖菜多糖（SFPS）对肿瘤机体红细胞合淌度的影响,建立了肿瘤动物模型,分高、中、低剂量腹腔给予羊栖菜多糖7 d,采集并制备红细胞悬液,应用高效毛细管电泳法检测红细胞的合淌度。实验条件:毛细管为75 μm×50 cm,电泳缓冲液为含2 g/L羟丙基甲基纤维素的磷酸盐溶液(0.1 mol/L,pH 7.4),压力进样为3.448 kPa×10 s,分离电压为20 kV,柱温为25 ℃,电渗淌度为2.16×10-4 cm2·V-1·s-1。实验结果表明：羊栖菜多糖能降低肿瘤机体红细胞的电泳迁移时间(阴性对照组为15.76 min,SFPS低剂量组为13.96 min,SFPS中剂量组为12.90 min,SFPS高剂量组为13.51 min,正常对照组为11.51 min),增加红细胞的合淌度(阴性对照组为1.06×10-4 cm2·V-1·s-1,SFPS低剂量组为1.19×10-4 cm2·V-1·s-1,SFPS中剂量组为1.29×10-4 cm2·V-1·s-1,SFPS高剂量组为1.23×10-4 cm2·V-1·s-1,正常对照组为1.45×10-4 cm2·V-1·s-1),SFPS 3个剂量组红细胞的合淌度与阴性对照组比较均有非常显著的差异(P＜0.01)。羊栖菜多糖能够改变肿瘤机体红细胞的合淌度,并使之趋向于正常机体水平,这可能与其改变红细胞表面的电荷密度有关。高效毛细管电泳法可以作为检测红细胞生理状态和功能的一种辅助工具。     

Characterization of surfactant and phospholipid vesicles for use as pseudostationary phases in electrokinetic chromatography

The physical, electrophoretic and chromatographic properties (mean diameter, electroosmotic flow, electrophoretic mobility, elution range, efficiency, retention, and hydrophobic, shape, and chemical selectivity) of three surfactant vesicles and one phospholipid vesicle were investigated and compared to a conventional micellar pseudostationary phase comprised of sodium dodecyl sulfate (SDS). Chemical selectivity (solute-pseudostationary phase interactions) was discussed from the perspective of linear solvation energy relationship (LSER) analysis. Two of the surfactant vesicles were formulated from nonstoichiometric aqueous mixtures of oppositely charged, single-tailed surfactants, either cetyltrimethylammonium bromide (CTAB) and sodium octyl sulfate (SOS) in a 3:7 mole ratio or octyltrimethylammonium bromide (OTAB) and SDS in a 7:3 mole ratio. The remaining surfactant vesicle was comprised solely of bis(2-ethylhexyl)sodium sulfosuccinate (AOT) in 10% v/v methanol, and the phospholipid vesicle consisted of 1-palmitoyl-2-oleyl-sn-glycero-3-phosphocholine (POPC) and phosphatidyl serine (PS) in 8:2 mole ratio. The mean diameters of the vesicles were 76.3 nm (AOT), 86.9 nm (CTAB/SOS), 90.1 nm (OTAB/SDS), and 108 nm (POPC/PS). Whereas the coefficient of electroosmotic flow (10(-4) cm2 V(-1) s(-1)) varied considerably (1.72 (OTAB/SDS), 3.77 (CTAB/SOS), 4.05 (AOT), 5.26 (POPC/PS), 5.31 (SDS)), the electrophoretic mobility was fairly consistent (-3.33 to -3.87 x 10(-4) cm2 V(-1) s(-1)), except for the OTAB/SDS vesicles (-1.68). This resulted in elution ranges that were slightly to significantly larger than that observed for SDS (3.12): 3.85 (POPC/PS), 8.6 (CTAB/SOS), 10.1 (AOT), 15.2 (OTAB/SDS). Significant differences were also noted in the efficiency (using propiophenone) and hydrophobic selectivity; the plate counts were lower with the OTAB/SDS and POPC/PS vesicles than the other pseudostationary phases (< or = 75,000/m vs. > 105,000/m), and the methylene selectivity was considerably higher with the CTAB/SOS and OTAB/SDS vesicles compared to the others (ca. 3.10 vs. < or = 2.6). In terms of shape selectivity, only the CTAB/SOS vesicles were able to separate all three positional isomers of nitrotoluene with near-baseline resolution. Finally, through LSER analysis, it was determined that the cohesiveness and hydrogen bond acidity of these pseudostationary phases have the greatest effect on solute retention and selectivity.     

Poly（dimethylsiloxane） Microchips with Two Sharpened Stretching Tips and Its Application to Protein Separation Using Dynamic Coating

An integrated poly（dirnethylsiloxane） （PDMS） microchip with two sharpened stretching tips for convenient sample injecting, running buffer refreshing and channel cleaning has been presented. The sample was directly introduced into the separation channel through the stretching inlet tip without complicated power switching supplies and injection cross channel. The operation of running buffer refreshing or channel cleaning was simplified by vacuuming one end of the tip and placing the other tip into the solution vial. Therefore, this fabrication method can be easily applied to most analytical laboratories economically without soft lithography and plasma bonding equipments. The attractive performance of the novel PDMS microchips has been demonstrated by using laser-induced fluorescence detection for separation of proteins. The addition of 0.04% Brij 35 in 0.04 mol/L phosphate buffer （pH 7.0） can reduce the adhesion of proteins in multienzyme tablet and make separation more easily. The electroosmotic flow （EOF） exhibits pH-independence in the range of 3-1 1 in dynamic modified microchannel.     

Poly(ethylene oxide) facilitates the characterization of an affinity between strongly basic proteins with DNA by affinity capillary electrophoresis

In order to study kin17 protein-DNA affinity, we have developed a fast and reproducible capillary electrophoresis (CE) analysis of a strongly basic protein: kin17 protein, using a nonpermanent coating based on poly(ethylene oxide) (PEO) to avoid adsorption of kin17. The coating procedure was optimized to provide a residual and stable electroosmotic flow (EOF = 5 x 10(-5) cm(2)/V x s), exhibiting RSD of 0.3% and excellent long-term stability. Good intraday and interday reproducibility of kin17 migration times (0.8 and 0.3% relative standard deviation (RSD), respectively) enabled us to consider that the recovery percentage obtained for kin17 protein was satisfactory (79%). The potential of this PEO-based coating procedure was evaluated for affinity CE method in order to study the affinity of kin17 protein for two single-stranded DNA (ssDNA) models: polydeoxyadenylic acid and polydeoxycytidilic acid (pdA and pdC). Binding constants (1.5 x 10(7) +/- 17% and 1.7 x 10(7) + 25%M(-1)) were evaluated assuming a 1:1 affinity between kin17 and pdA or pdC, respectively.     

Analysis of double-stranded DNA by capillary electrophoresis using poly(ethylene oxide) in the presence of hexadecyltrimethylammonium bromide

The impact of hexadecyltrimethylammonium bromide (CTAB) on the separation of ds-DNA by capillary electrophoresis in conjunction with laser-induced fluorescence (CE-LIF) detection using poly(ethylene oxide) (PEO) solution is described. The use of CTAB for improved separation reproducibility and efficiency of DNA has not been demonstrated although it is widely used for controlling the magnitude and direction of electroosmotic flow in CE. With increasing CTAB concentration, the interactions of DNA with ethidium bromide (EtBr) and with the capillary wall decrease. For the separation of DNA fragments with the sizes ranging from several base pairs (bp) to 2,176 bp, a polymer solution consisting of 0.75% poly(ethylene oxide), 100 mM TB buffer (pH 8.0), 25 microg/mL EtBr, and 0.36 microg/mL CTAB is proper. Using the PEO solution, we separated a mixture of DNA markers V (pBR 322/HaeIII digest) and VI (pBR 328/BglI digest and pBR 328/HinfI digest) within 8 min at -375 V/cm, with the limit of detection of 2.0 ng/mL based on the peak height for the 18-bp DNA fragment. The method is highly efficient (>10(6)plate/m), repeatable (RSD of the migration times <1.5%), and sensitive. In addition, it is convenient to fill a capillary (75 microm in diameter) with such a low-viscosity PEO solution by syringe pushing.     

Simultaneous capillary electrophoretic separation and detection of P(V) and As(V) As heteropoly-blue complexes

A capillary electrophoretic (CE) method was developed for the simultaneous determination of P(V) and As(V). A Mo(VI)-ascorbic acid reagent reacted with a mixture of trace amounts of P(V) and As(V) to form the corresponding heteropoly-blue complexes in 0.05 M acetate buffer (pH 3.5). When 0.05 M malonate buffer was used as a migration buffer, the peaks due to their migrations were well separated in the electropherogram, and the pre-column complex-formation reaction was applied to the simultaneous CE determination of P(V) and As(V) with direct UV detection at 220 nm. With the proposed method, the calibration curves were linear in the concentration range of 5 x 10(-7) - 1 x 10(-4) M, with a detection limit of 1 x 10(-7) M (a signal-to-noise ratio of 3). Interference from foreign ions was also discussed.     

Capillary electrochromatography using a fluoropolymer as the chromatographic support material

Fused-silica capillary columns were packed with ethylene chlorotrifluoroethylene (ECTFE) particles for use in capillary electrochromatography (CEC). Electroosmotic flow (EOF) was generated in these columns using acetonitrile-water mixtures as the mobile phase. Electroosmotic mobilities of 1.6 x 10(-4) cm2 V(-1) s(-1) (linear velocities of 1 mm s(-1)) were observed using a mobile phase without an electrolyte present. The EOF in the ECTFE-packed columns is enhanced when using trifluoroacetic acid (TFA) as a mobile phase additive; electroosmotic mobilities of 3.65 x 10(-4) cm2 (V-1) s(-1) (linear velocity of 2.5 mm s(-1)) were observed. This enhancement of EOF is attributed to dynamic coating of the ECTFE particles by TFA. Other electrolytes (i.e., Tris/Tris-HCl buffer and H3PO4) in the mobile phase did not have such an enhancement of EOF. However, a slight enhancement of EOF is observed, for example, if small quantities of TFA are added to the mobile phase containing Tris buffer. The potential of ECTFE for CEC is demonstrated by separating a mixture of amino acids.     

Silanizing agent for semipermanent wall coating in micellar electrokinetic capillary chromatography

In this paper, the long-chained, silanizing agent chloro(dodecyl)dimethylsilane (CDDS) was investigated as a semipermanent coating in micellar electrokinetic capillary chromatography (MEKC). CDDS coating had great stability due to the formation of covalent bonding with the silanol groups on the surface of fused-silica capillary and remained stable for over 100 min after removal of the rinse step of CDDS solution. Anionic surfactant sodium dodecyl sulfate (SDS) could aggregate at this CDDS coating by the hydrophobic group and formed a SDS layer which could increase the electroosmotic flow (EOF). The separation was performed with the running buffer composed of 60mM sodium tetraborate, 12 mM SDS at pH 9.9, with the applied voltage of 20 kV and capillary temperature 25 degrees C. The effect of the coating agent was investigated by the analysis of amino acids. Compared with previous no-coating method, the EOF increases from 4.34 x 10(-4)cm(2)V(-1)s(-1) to 7.02 x 10(-4)cm(2)V(-1)s(-1). Migration time reproducibility was less than 0.97% R.S.D. from run to run and less than 1.56% R.S.D. from day to day.     

Analysis of drying oils used as binding media for objects of art by capillary electrophoresis with indirect UV and conductivity detection

Capillary electrophoresis (CE) was applied to analyse the long-chain fatty acid composition of vegetable oils, and their degradation products formed upon ageing when drying oils are used as binding media. The analytes were detected with contactless conductivity detection (CCD) and indirect UV absorption, both detectors positioned on-line at the separation capillary. The long-chain fatty acids were resolved in a background electrolyte (BGE) consisting of phosphate buffer (pH = 6.86, 15 mM) containing 4 mM sodium dodecylbenzensulfonate, 10 mM Brij 35, 2% (v/v) 1-octanol and 45% (v/v) acetonitrile. As in this system dicarboxylic analytes, the products of oxidative degradation of unsaturated fatty acids, cannot be determined, a suitable background electrolyte was developed by the aid of computer simulation program PeakMaster. It makes use of a 10 mM salicylic acid, 20 mM histidine buffer, pH 5.85, which combines buffering ability with the optical properties obligatory for indirect UV detection. This buffer avoids system eigenpeaks, which are often impairing the separation efficiency of the system. Separation of the dicarboxylic analytes was further improved by a counter-directed electroosmotic flow (EOF), obtained by dynamically coating the capillary wall with 0.2 mM cetyltrimethylammonium bromide. Long-chain fatty acids and their decomposition products could be determined in recent and aged samples of drying oils, respectively, and in samples taken from two paintings of the 19th century.     

Electroosmotic flow in poly(dimethylsiloxane) microchannels

This paper reports on the study of electroosmotic flow (EOF) in poly(dimethylsiloxane) (PDMS) microchannels on the basis of indirect amperometric detection method. Gradual increase of EOF rate in freshly prepared PDMS microchannels was observed with the running buffer of phosphate buffer solution (PBS). With the same concentration (10 mM) of PBS containing different cations and the same pH value (7.0) and, the time of the stable EOF in PDMS microchannels under the applied separation voltage of 1000 V was 49.8 s (Li+ -PBS), 57.1 s (Na+ -PBS), 91 s (K+ -PBS), respectively. Meanwhile, the different adsorption of cations (Li+, Na+ and K+) on hydrophobic PDMS wall was observed through their separation in PDMS microchannels. Such experimental results demonstrated that the EOF in PDMS microchannels came from the cations and anions adsorbed on PDMS wall. This study would not only help us understand the surface state of PDMS, but also provide a useful guidance for establishing the effective surface modification methods in PDMS microchip CE.