Synthesis and characterization of copper(II) complexes incorporating pyrazolyl-derived N,S-donor bidentate ligands

The novel bidentate N,S-donor anionic ligands [PhNCSIndz]^?, [PhNCSImz]^?, [PhNCSPz^Me3]^?, and [EtNCSPz]^?, where Indz?=?indazole, Imz?=?imidazole, Pz^Me3?=?3,4,5-trimethylpyrazole, and Pz?=?pyrazole, were synthesized and used to prepare Cu(II) complexes of general formula [Cu(N^S)₂]. The ligands were synthesized via direct addition of phenylisothiocyanate or ethylisothiocyanate into THF suspensions of the corresponding sodium-pyrazolate salts. All of the synthesized compounds, including the ligands and the complexes, were characterized by physico-chemical and spectroscopic methods, and crystal structures of [Cu(EtNCSPz)₂] and [Cu(PhNCSPz^Me2)₂] were determined by X-ray diffraction analysis, showing a trans-square planar geometry for [Cu(EtNCSPz)₂] and a distorted tetrahedral geometry for [Cu(PhNCSPz^Me2)₂].     

Synthesis and structural characterization of nickel(II) hexaazamacrotetracyclic complexes with phthalate ligands

Highly crosslinked polymeric networks formed by cyclodextrins (CD) have recently been shown to be highly versatile nanosponge systems, being for instance very efficient both for drug delivery and for pollutants removal. Here we report some molecular simulation results for dry and hydrated CD nanosponge models aimed to study their swelling behavior. We also report simulation results about the water mobility in these systems in terms of the calculated diffusion coefficient of “free” and of “bound” water molecules confined within the nanosponge cavities. Furthermore, we also suggest the presence of surface-constrained water molecules temporarily bound to the network surface but eventually set free in the bulk.     

Synthesis, structural characterization and thermal properties of three copper(II) complexes based on aryl hydrazide ligands

The thiosemicarbazide and hydrazide Cu(II) complexes, [Cu₃L₂¹(py)₄Cl₂] (1), [Cu(HL²)py] (2) and [Cu(HL³)py] (3), (H₂L¹ = 1-picolinoylthiosemicarbazide, H₃L² = N′-(2-hydroxybenzylidene)-3-hydroxy-2-naphthohydrazide, H₃L³ = 2-hydroxy-N′-((2-hydroxy-naphthalen-1-yl)methylene)benzohydrazide) have been prepared and characterized through physicochemical and spectroscopic methods as well as X-ray crystallography. Complex 1 has a centrosymmetric structure with –N–N– bridged Cu₃ skeleton. Neighboring molecules are linked into a 3D supermolecular framework by π–π stacking interactions, N–H···Cl and C–H···Cl hydrogen bonds. Complexes 2 and 3 have similar planar structures but different dimers formed by concomitant Cu···N and Cu···O interactions, respectively. Solvent accessible voids with a volume of 391 ?³ are included in the structure of complex 2, indicating that this complex is a potential host candidate. Thermogravimetric analysis shows that the three complexes are stable up to 100 °C.     

Synthesis, characterization, and structures of copper(II)-thiosulfate complexes incorporating tripodal tetraamine ligands

The reaction of [Cu(L)(H(2)O)](2+) with an excess of thiosulfate in aqueous solution produces a blue to green color change indicative of thiosulfate coordination to Cu(II) [L = tren, Bz(3)tren, Me(6)tren, and Me(3)tren; tren = tris(2-aminoethyl)amine, Bz(3)tren = tris(2-benzylaminoethyl)amine, Me(6)tren = tris(2,2-dimethylaminoethyl)amine, and Me(3)tren = tris(2-methylaminoethyl)amine]. In excess thiosulfate, only [Cu(Me(6)tren)(H(2)O)](2+) promotes the oxidation of thiosulfate to polythionates. Products suitable for single-crystal X-ray diffraction analyses were obtained for three thiosulfate complexes, namely, [Cu(tren)(S(2)O(3))].H(2)O, [Cu(Bz(3)tren)(S(2)O(3))].MeOH, and (H(3)Me(3)tren)[Cu(Me(3)tren)(S(2)O(3))](2)(ClO(4))(3). Isolation of [Cu(Me(6)tren)(S(2)O(3))] was prevented by its reactivity. In each complex, the copper(II) center is found in a trigonal bipyramidal (TBP) geometry consisting of four amine nitrogen atoms, with the bridgehead nitrogen in an axial position and an S-bound thiosulfate in the other axial site. Each structure exhibits H bonding (involving the amine ligand, thiosulfate, and solvent molecule, if present), forming either 2D sheets or 1D chains. The structure of [Cu(Me(3)tren)(MeCN)](ClO(4))(2) was also determined for comparison since no structures of mononuclear Cu(II)-Me(3)tren complexes have been reported. The thiosulfate binding constant was determined spectrophotometrically for each Cu(II)-amine complex. Three complexes yielded the highest values reported to date [K(f) = (1.82 +/- 0.09) x 10(3) M(-1) for tren, (4.30 +/- 0.21) x 10(4) M(-1) for Bz(3)tren, and (2.13 +/- 0.05) x 10(3) M(-1) for Me(3)tren], while for Me(6)tren, the binding constant was much smaller (40 +/- 10 M(-1)).     

Preparation and characterization of dinuclear Pd(II) complexes of binucleating tetraaza-thiophenolate ligands

The thioethers 4-tert-butyl-2,6-bis((2-(dimethylamino)ethylimino)methyl)phenyl(tert-butyl)sulfane (tBu-L3) and 4-tert-butyl-2,6-bis((2-(dimethylamino)ethylimino)methyl)phenyl(tert-butyl)sulfane (tBu-L4) react with PdCl2(NCMe)2 to give the dinuclear palladium thiophenolate complexes [(L3)Pd2Cl2]+ (2) and [(L4Pd2(mu-Cl)]2+ (3) (HL3= 2,6-bis((2-(dimethylamino)ethylimino)methyl)-4-tert-butylbenzenethiol, HL4 = 2,6-bis((2-(dimethylamino)ethylamino)methyl)-4-tert-butylbenzenethiol). The chloride ligands in could be replaced by neutral (NCMe) and anionic ligands (NCS-, N3-, CN-, OAc-) to give the diamagnetic Pd(II) complexes [(L3)Pd2(NCMe)2]3+ (4), [(L3)Pd2(NCS)2]+ (5), [(L3)Pd2(N3)2]+ (6), [{(L3)Pd2(mu-CN)}2]4+ (7) and [(L3)Pd2(OAc)]2+ (9). The nitrile ligands in and in [(L3)Pd2(NCCH2Cl)2]3+ are readily hydrated to give the corresponding amidato complexes [(L3)Pd2(CH3CONH)]2+ (8) and [(L3)Pd2(CH2ClCONH)]2+ (10). The reaction of [(L3)Pd2(NCMe)2]3+ with NaBPh4 gave the diphenyl complex [(L3)Pd2(Ph)2]+ (11). All complexes were either isolated as perchlorate or tetraphenylborate salts and studied by IR, 1H and 13C NMR spectroscopy. In addition, complexes 2[ClO4], 3[ClO4]2, 5[BPh4], 6[BPh4], 7[ClO4]4, 9[ClO4]2, 10[ClO4]2 and 11[BPh4] have been characterized by X-ray crystallography.     

Synthesis and structural characterization of ruthenium(II) complexes bearing phosphine-pyrazolyl based tripod ligands

Phosphine-pyrazolyl based tripod ligands ROCH₂C(CH₂Pz)₂(CH₂PPh₂) (R = H, Me, allyl; Pz = pyrazol-1-yl) were efficiently synthesized and characterized. Reactions of these ligands with [Ru(η⁶-p-cymene)Cl₂]₂ afforded complexes of the type [Ru(η⁶-p-cymene)Cl₂](L) (6-8) in which the ligands exhibit κ¹-P-coordination to the metal center. Complex [Ru(η⁶-p-cymene)Cl₂{Ph₂PCH₂C(CH₂OH)(CH₂Pz)₂}] (6) underwent chloride-dissociation in CH₂Cl₂/MeCN to give complex [RuCl(η⁶-p-cymene){κ²(P,N)-Ph₂PCH₂C(CH₂OH)(CH₂Pz)₂}][Cl] (9). Complexes 6-9 demonstrated poor to moderate catalytic activity in the transfer hydrogenation of acetophenone. All these complexes were fully characterized by analytical and spectroscopic methods and their molecular structures were determined by X-ray crystallographic study.     

Copper(II) complexes bearing cyclobutanecarboxylate and pyridine ligands: a new series of dinuclear paddle-wheel complexes

Monatshefte für Chemie - Chemical Monthly - Four members of a new series of paddle-wheel copper(II) complexes bearing cyclobutanecarboxylate as bridging ligand with pyridine derived ligands in...     

Synthesis and structural characterization of novel zinc(II) and cadmium(II) complexes with pyridine-phosphine chalcogenide ligands

New pyridine-phosphine chalcogenide ligands, tris[2-(2-pyridyl)ethyl]phosphine sulfide 1a and tris[2-(2-pyridyl)ethyl]phosphine selenide 1b, react with zinc(II) and cadmium(II) chlorides in EtOH at room temperature to afford complexes of compositions 2ZnCl₂·2L (2, L = 1a) and 3CdCl₂·2L (3a,b, L = 1a,b) in high yields. The solid-state structure of complexes 2, 3 has been proved by X-ray analysis data. Complex 2 is a centrosymmetric dimer, where two atoms of zinc are bonded by two bridging pyridine-phosphine sulfide ligands through N atoms. Complexes 3a,b exist as polymeric chains with each bridging ligand acting as a chelate N,S- or N,Se-donor to one cadmium(II) center and as a pyridine N-donor to the next cadmium(II) center.     

Copper(II) complexes with singly condensed tridentate Schiff-base ligands incorporating 1-benzoylacetone

Two copper(II) complexes [CuL¹Cl]_n (1) and [CuL²Cl] (2) with singly condensed tridentate Schiff-base ligands [HL¹ = 6-amino-3-methyl-1-phenyl-4-azahex-3-en-1-one and HL² = 6-diethylamino-3-methyl-1-phenyl-4-azahex-3-en-1-one] have been synthesized and structurally characterized by X-ray crystallography. Complex 1 is a single-chloro-bridged one-dimensional polymer, whereas 2 is a monomeric square-planar complex. The H-bonding interactions of the amine hydrogen and the non-bonding interactions of phenyl groups in the Schiff base play important roles for the structural variations.     

Synthesis and structural characterization of two cationic dinuclear cymene-ruthenium(II) complexes with thiolato and chloro bridges

Treatment of [(p-cymene)RuCl₂]₂ with HSp-Tol or HSCH₂Ph in the presence of K[PF₆] gave the cationic dinuclear cymene–ruthenium(II) complexes [(p-cymene)₂Ru₂(μ-Cl)(μ-Sp-Tol)₂][PF₆] (1) and [(p-cymene)₂Ru₂(μ-Cl)(μ-SCH₂Ph)₂][PF₆] (2), respectively, which have been characterized by IR, NMR spectroscopies and mass spectrometry along with microanalyses. Their crystal structures were determined by single-crystal X-ray diffraction analyses. The structures of the cationic complexes contain the unusual pseudo-trigonal-bipyramidal Ru₂S₂Cl framework without a ruthenium–ruthenium single bond. The two p-cymene–ruthenium units are held together by two bridging thiolates and one bridging chloride.     

Synthesis, characterization and structural analysis of new copper(II) complexes incorporating a pyridoxal-semicarbazone ligand

The reaction between 3-hydroxy-5-hydroxymethyl-2-methyl-4-pyridinecarboxaldehyde semicarbazone (pyridoxal-semicarbazone or PLSC) and appropriate chloride, sulfate, nitrate or thiocyanate Cu(II) salts in water/alcohol mixtures resulted in the formation of new copper(II) complexes: [Cu(PLSC)Cl₂] (1), [Cu(PLSC)(H₂O)(SO₄)]₂·3H₂O (2), [Cu₂(PLSC)₂(NCS)₂](NCS)₂ (3), [Cu(PLSC)(NO₃)₂(CH₃OH)] (4) and [Cu(PLSC-2H]NH₃·H₂O (5). The complexes were characterized by elemental analysis, conductometric measurements and IR spectroscopy, while complexes 1, 2, 3 and 4 were further characterized by single crystal X-ray diffraction.     

Copper(II)-methylmalonate complexes with unidentate N-donor ligands: Syntheses,structural characterization and magnetic properties

Two new methylmalonate-bridged copper(II) complexes with the formulas [Cu(3-Ipy)(Memal)(H₂O)] (1) and [Cu(2,4′-bpy)(Memal)(H₂O)] · 3H₂O (2) [Memal = methylmalonate dianion, 3-Ipy = 3-iodopyridine, 2,4′-bpy = 2,4′-bipyridine] have been synthesized and characterized by X-ray diffraction. Both compounds crystallize in the monoclinic space group P2₁/n and Z = 4, with unit cell parameters a = 8.5874(13) Å, b = 7.1738(14) Å, c = 19.093(5) Å, β = 99.509(15)° in 1 and a = 17.375(4) Å, b = 7.3305(14) Å, c = 14.247(3) Å, β = 111.409(15)° in 2. The structures of 1 and 2 consist of zigzag chains of anti-syn carboxylate-bridged copper(II) ions running along the b direction. The pyridine-like ligands occupy one equatorial position of the copper environment avoiding the formation of the sheet-like arrangement observed in previously reported Memal complexes. The chains are grouped together in hydrophilic layers through hydrogen bonds and the layers are pillared through the 3-Ipy (1) and 2,4′-bpy (2) ligands which are stacked through π–π interactions involving alternatively aromatic ligands from two adjacent chains. Magnetic susceptibility measurements of both compounds in the temperature range 2–290 K show the occurrence of intrachain ferromagnetic interactions between the copper(II) ions [J = +2.66(2) cm^?1 (1) and J = +2.62(2) cm^?1 (2)].     

Synthesis,characterization, and antioxidant activities of three Cu(II) complexes with Schiff-base ligands

Cu(II) complexes of three bis(pyrrol-2-yl-methyleneamine) ligands were synthesized and characterized by elemental analyses, mass spectra, and IR spectra. X-ray diffraction analysis shows that [CuL³]₂ is a dinuclear complex with an extremely distorted square-planar geometry. Furthermore, the antioxidant activities of the compounds have been investigated. The electrochemical properties of the Cu(II) complexes have also been studied by cyclic voltammetry. The Cu(II) complexes show similar superoxide dismutase (SOD) activity compared with that of the native Cu, Zn-SOD.     

Synthesis, characterization and catalytic activity of three palladium(II) complexes containing Schiff base ligands

Three new Pd(II) complexes of Schiff base ligands, namely, [Pd₄(L¹)₄] (1), [Pd₂(L²)₂Cl₂] (2) and [Pd(L³)₂Cl₂] (3) [HL ¹ ?=?N-(benzylidene)-2-aminophenol; L ² ?=?N-(2,4-dichlorobenzylidene)-2,6-diethylbenzenamine, L ³ ?=?4-(2,4-dichlorobenzylide-neamino)phenol] have been synthesized using solvothermal methods and characterized by elemental analysis, spectroscopy and single crystal X-ray diffraction. The crystal structures of the free ligands were also determined. The ??-oxygen-bridged tetranuclear cyclometallated Pd(II) complex (1) contains four nearly planar units, in which Pd^II is four-coordinate. Complex 2 is a ??-chloro-bridged dinuclear cyclometallated Pd(II) complex, whereas complex 3 is mononuclear. The Heck reactions of bromobenzene with acrylic acid catalyzed by complexes 1?C3 have also been studied.     

Synthesis, spectral and structural characterization of three zinc(II) azide complexes with aminopyrazine

The reaction between zinc(II) azide, Zn(N₃)₂ and aminopyrazine (ampyz) afforded the complexes: [Zn(N₃)₂(ampyz)₂] (1), [Zn(N₃)₂(ampyz)]_n (2) and [Zn₃(N₃)₆(ampyz)₂]_n (3). These complexes are characterized by spectroscopic and crystallographic methods. The IR spectra of these compounds are measured and discussed. The structure of 1 consists of isolated tetrahedral zinc atom surrounded by two mono-dentate N-ampyz and two terminal azido ligands. Complex 2 features a zigzag chain of zinc centers in which each zinc is surrounded by alternate di-EO (end-on) and di-EE (end-to-end) azide bridges, the chain thus contains alternate four-membered Zn₂N₂ and eight-membered Zn₂(NNN)₂ rings. The two ampyz ligands are located in cis-arrangement and each of them further binds another zinc atom giving rise to a 3D network. Complex 3 contains two structurally different zinc atoms; the six-coordinate Zn(1) center links two di-EO azido bridges and two trans ampyz, thus having ZnN₆ chromophore. The five-coordinate Zn(2) center binds two di-EO bridging azido groups and the fifth position is occupied by an N atom from a bridging ampyz molecule. Both zinc centers, therefore participate in the formation of a 1D chain of cyclic Zn₂N₂ units. Each ampyz ligand binds another zinc atom via the second pyrazinic N atom giving another cross-chain and thus the structure consists of 2D sheets. In these three complexes the azido ligands of all types are asymmetric and linear within the experimental error.     

Synthesis,characterization, and fluorescence properties of dinuclear cadmium(II) complexes

Four dinuclear cadmium(II) complexes, [Cd₂(L¹)(μ₂-Cl)Cl₂] (1), [Cd₂(L²)(μ₂-Cl)Cl₂] (2), [Cd₂(L³)(μ₂-Cl)Cl₂] (3), and [Cd₂(L⁴)₃ClO₄] (4), where HL¹ = 4-methyl-2,6-bis(1-(2-piperidinoethyl)iminomethyl)-phenol, HL² = 4-methyl-2,6-bis(1-(2-pyrrolidinoethyl)iminomethyl)-phenol, HL³ = 4-methyl-2,6-bis(1-(2-morpholinoethyl)iminomethyl)-phenol and HL⁴ = 4-methyl-2,6-bis(cyclohexylmethyl)iminomethyl)-phenol, were synthesized. They were characterized by elemental analysis, FT-IR, UV–Vis, fluorescence and electronspray ionization mass spectroscopy. Complexes 1 and 4 were also characterized by single crystal X-ray analysis. The cadmiums atoms in 1 are linked by μ₂-chloride in a distorted square pyramidal geometry, whereas cadmium atom in 4 is in a distorted octahedral environment. The complexes show emission bands around 500 nm with excitation at 395 nm.     

Synthesis and spectroscopic studies of dinuclear copper(II) complexes with new pendant-armed macrocyclic ligands

Three dinuclear Cu^II perchlorate complexes of macrocyclic ligands derived from the condensation of sodium 4-X-2,6-diformylphenolate (X=Me, Cl or Bu^t) with 1,5-diamino-3-(8-methylquinolyl)azapentane were prepared by in situ transmetallation with Cu(ClO₄)₂ and characterized by physicochemical, spectroscopic and electrochemical methods.     

Co(II) and Ni(II) complexes with imidazole-containing ligands: Synthesis,structural characterization,and magnetic property

Hydrothermal reaction of Co(II) salt with 1,4-di(1-imidazolyl)benzene (L¹) and 4,4’-oxydiphthalic acid (H₄OA) yields a new complex [Co₃(HOA)₂(L¹)₄(H₂O)₄] (I). [Ni(L²)₂SO₄] · 0.5H₂O (II) can be obtained via the hydrothermal reaction of NiSO₄ · 6H₂O with 1,3-di(1H-imidazol-4-yl)benzene (L²). Complexes I and II have been characterized by single-crystal and powder X-ray diffraction (CIF files CCDC nos. 1019291 (I) and 1019292 (II)), IR, elemental, and thermogravimetric analyses. Complex I exhibits the uninodal six-connected 3D pcu framework structure of I with (4¹² · 6³) topology; Complex II consists of the uninodal four-connected 2D sql (4⁴ · 6²) networks. In addition, magnetic property of I was investigated.     

Synthesis and structural characterization of Sm(II) and Yb(II) complexes containing sterically demanding, chelating secondary phosphide ligands

Metathesis between [(Me3Si)2CH)(C6H4-2-OMe)P]K and SmI2(THF)2 in THF yields [([Me3Si]2CH)(C6H4-2-OMe)P)2Sm(DME)(THF)] (1), after recrystallization. A similar reaction between [(Me3Si)2CH)(C6H3-2-OMe-3-Me)P]K and SmI2(THF)2 yields [([Me3Si]2CH)(C6H3-2-OMe-3-Me)P)2Sm(DME)].Et2O (2), while reaction between [(Me3Si)2CH)(C6H4-2-CH2NMe2)P]K and either SmI2(THF)2 or YbI2 yields the five-coordinate complex [([Me3Si]2CH)(C6H4-2-CH2NMe2)P)2Sm(THF)] (3) or the solvent-free complex [([Me3Si]2CH)(C6H4-2-CH2NMe2)P)2Yb] (4), respectively. X-ray crystallography shows that complex 2 adopts a distorted cis octahedral geometry, while complex 1 adopts a distorted pentagonal bipyramidal geometry (1, triclinic, P1, a = 11.0625(9) A, b = 15.924(6) A, c = 17.2104(14) A, alpha = 72.327(2) degrees, beta = 83.934(2) degrees, gamma = 79.556(2) degrees, Z = 2; 2, monoclinic, P2(1), a = 13.176(4) A, b = 13.080(4) A, c = 14.546(4) A, beta = 95.363(6) degrees, Z = 2). Complex 3 crystallizes as monomers with a square pyramidal geometry at Sm and exhibits short contacts between Sm and the ipso-carbon atoms of the ligands (3, monoclinic, C2/c, a = 14.9880(17) A, b = 13.0528(15) A, c = 24.330(3) A, beta = 104.507(2) degrees, Z = 4). Whereas preliminary X-ray crystallographic data for 4 indicate a monomeric structure in the solid state, variable-temperature 1H, 13C(1H), 31P(1H), and 171Yb NMR spectroscopies suggest that 4 undergoes an unusual dynamic process in solution, which is ascribed to a monomer-dimer equilibrium in which exchange of the bridging and terminal phosphide groups may be frozen out at low temperature.