Kinetics and mechanism of chromic acid oxidation of oxalic acid in absence and presence of different acid media. A kinetic study

Kinetics and mechanism of the reaction of Cr(VI) with oxalic acid have been studied in presence and absence of H₂SO₄, HClO₄, and CH₃COOH by monitoring the formation of Cr(III)-oxalic acid complex at 560 nm. The effect of total [oxalic acid], [Cr(VI)], [H₂SO₄], [HClO₄], and [CH₃COOH] on the reaction rate was determined at 30°C. Formation of carbon dioxide was also confirmed. The oxidation rate increases with [oxalic acid] and [CH₃COOH] while it decreases with [H₂SO₄], [HClO₄], and pH. The rate law governing the oxidation of oxalic acid over a wide range of conditions is rate=k₁ K_es1 [oxalic acid]_T [Cr(VI)]_T 1+K_es1 [oxalic acid]_T, where only undissociated oxalic acid is kinetically active. Kinetic evidence for the formation of a Cr(VI)(SINGLEBOND)oxalic acid 1:1 complex has been obtained and the equilibrium constant for their formation has been determined. The 1:1 complex exists most likely in an open chain form. The rate-limiting step of the oxidation reaction involves the breaking of the C(SINGLEBOND)C bond in the 1:2 complex. Oxidizing ability of Cr(VI) species have been discussed. Mechanism with the associated reaction kinetics is assigned. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 335–340, 1998     

Kinetics of Ce(IV) oxidation of α-keto acids in sulfuric-perchloric acid media

The rates of oxidation of four α-keto acids, glyoxylic, pyruvic, phenylglyoxylic, and 2-oxobutyric acids by Cerium(IV) in H₂SO₄? HaHSO₄ and H₂SO₄? HClO₄ solutions, have been studied spectrophotometrically. The rate data suggest that CeSO is the most reactive of the Cerium(IV)-sulfate complexes present in the H₂SO₄? NaHSO₄ and H₂SO₄? HClO₄ systems. The oxidation reaction is proposed to be a one-electron process with the rate-determining step being the decomposition of a α-ketoacid-Cerium(IV) complex to a free radical and carbon dioxide through a transition state.     

Kinetic study of the Ce(iii)- or Mn(ii)-catalyzed Belousov–Zhabotinsky reactions with mixed organic acid/ketone substrates

In a stirred batch reactor, the Ce(III)- or Mn(II)-catalyzed Belousov–Zhabotinsky reaction with mixed organic acid/ketone substrates exhibits oscillatory behavior. The organic acids studied here are: dl-mandelic acid (MDA), dl-4-bromomandelic acid (BMDA), and dl-4-hydroxymandelic acid (HMDA), and the ketones are: acetone (Me₂CO), methyl ethyl ketone (MeCOEt), diethyl ketone (Et₂CO), acetophenone (MeCOPh), and cyclohexanone ((CH₂)₅CO). The effects of bromate ion, organic acid, ketone, metal-ion catalyst, and sulfuric acid concentrations on the oscillatory patterns are investigated. Both conventional and stopped-flow methods are applied to study the kinetics of the oxidation reactions of the above organic acids by Ce(IV) or Mn(III) ion. The order of relative reactivities of the oxidation reactions of organic acids in 1 M H₂SO₄ is Mn(III)(SINGLEBOND)HMDA reaction>Ce(IV)(SINGLEBOND)HMDA reaction>Mn(III)(SINGLEBOND)BMDA, reaction>Mn(III)(SINGLEBOND)MDA reaction>Ce(IV)(SINGLEBOND)BMDA reaction>Ce(IV)(SINGLEBOND)MDA reaction. Spectrophotometric study of the bromination reactions of the above ketones shows that these reactions are zero-order with respect to bromine and first-order with respect to ketone and that ketone enolization is the rate-determining step. The order of relative rates of bromination or enolization reactions of ketones in 1 M H₂SO₄ is (CH₂)₅CO≫(MeCOEt, Et₂CO, Me₂CO)>MeCOPh. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet:30: 595–604, 1998     

Kinetics and mechanism of hydrogen peroxide oxidation of chromone-3-carboxaldehydes in aqueous acid and micellar media

Oxidation of chromone-3-carboxaldehyde (CCA) and substituted analogues by H₂O₂ has been carried out in aqueous acid (HCl and H₂SO₄) and micellar media. Reaction kinetics indicated order in [CCA] as well as [H₂O₂] to be unity while it is a fraction (1 > n > O) in [acid]. Reaction rates were found to be faster in the solvents of low-dielectric constant (D). Added salt (KCl or (NH₄)₂SO₄) increased the rate of oxidation marginally. On the basis of observed linearity of Amis plot and marginal positive salt effect, protonated CCA (enol form of CCA, a cation) and H₂O₂ (neutral molecule) were considered as reactive species in the rate limiting step. Reaction rates were found to be enhanced significantly in anionic and nonionic micellar (sodium dodecylsulfate (SDS) and Triton X-100 (Tx), respectively) media. However, cationic micelles [cetyl trimethyl ammonium bromide (CTAB)] indicated marginal retardation effect. Effect of anionic and cationic micelles has been interpreted in terms of electrostatic interactions, while that of nonionic micelles in terms of hydrophobic interactions. Structure-reactivity correlations have been interpreted by Hammett's equation. Negative “ρ” (reaction constant) values indicated cationic transition state. © 1996 John Wiley & Sons, Inc.     

Oxidation of Am(III) and stability of Am(IV) and Am(VI) in mineral acid solutions

The oxidation of americium in HNO₃, H₂SO₄ and HClO₄ solutions by a mixture of potassium persulfate with silver salt in the presence of potassium phosphotungstate has been investigated. The influence of acid and its concentration, of (NH₄)₂S₂O₃, K₁₀P₂W₁₇O₆₁ and silver salt on Am(III) oxidation rate, yield and stability of Am(IV) and Am(VI), has been studied. The complexation of Am(III), Am(IV) and Am(VI) with phosphotungstate ions has been investigated. It has been established that Am(III) and Am(IV) form ML₂ complexes and their apparent stability constants have been estimated. The oxidation mechanism is discussed. A method for preparing of Am(IV) in 0.1–6M HNO₃, O.1–3M H₂SO₄, 0.1–1M HClO₄ solutions is proposed. The oxidation of Am(III) to Am(IV) by KBrO₃ and K₂Cr₂O₇ in HNO₃, H₂SO₄, HClO₄ solutions in the presence of K₁₀P₂W₁₇O₆₁ has been investigated.     

Equilibrium and kinetic studies of electron transfer reactions involving quinolinium dichromate and aminoalcohols in aqueous acid media

Summary Oxidation of the aminoalcohols (AA) such as ethanolamine, diethanolamine and triethanolamine by quinolinium dichromate (QDC) yielded formaldehyde as the main product in aqueous H₂SO₄ and HClO₄ media. The reaction kinetics exhibited a first-order dependence on [QDC]. Plots of 1/k versus 1/[AA] indicated the formation of a QDC-A A adduct prior to the rate limiting step. The equilibrium constants, K, for the formation of QDC-AA adducts were evaluated by kinetic and spectroscopic (Ardon's) methods. The reaction was found to be catalysed by HClO₄ and H₂SO₄. The results were analysed in terms of various acidity function theories.     

Aquation of K2 TcBr6 in dilute acid solutions

The photochemical aquation of K₂ TcBr₆ in 2M HRr, 1M HClO₄ and 1M H₂SO₄ has been studied. The absorption spectra of the various Tc(IV) species were measured after the electrophoretic separation. The spectrophotometric changes and the yield of each species as a function of the UV irradiation time were determined. After 25 hours of irradiation of HBr and HClO₄ solutions the main species were the cationic ones (80%) but in H₂SO₄ solution the neutral species reached a yield of 90%. The oxidation of Tc(IV) species to TcO ₄ ^– proceeded more rapidly and extensively in HClO₄ than in HBr and H₂SO₄.     

XPS spectroscopic study of potentiostatic and galvanostatic oxidation of Pt electrodes in H2SO4 and HClO4

The surface oxides produced from potentiostatic and galvanostatic oxidation of Pt electrodes in HClO₄ and H₂SO₄ are examined using X-ray photoelectron spectroscopy. The oxide I species produced as the initial oxidation product by successively more anodic potentiostatic oxidation in 0.2 M HClO₄ is found to have a Pt²⁺ oxidation state, a binding energy characteristic of neither PtO, Pt(OH)₂ or PtO₂, and a limiting thickness of 8 Å. Galvanostatic oxidation in HClO₄ and H₂SO₄ is found to produce PtO₂·H₂O as an unlimiting growth oxide or a limiting growth oxide layer depending on the concentration of the acid electrolyte. The incorporation of the acid electrolyte anion in the surface layer is shown to have an effect on which type of oxide layer is produced. X-ray decomposition and chemical modification by Ar⁺ stripping are shown to produce chemical artifacts complicating any interpretation of a Pt oxide surface layer.     

Kinetics and mechanism of oxidation of malonic acid by permanganate and manganese dioxide in acid perchlorate medium

Summary The kinetics of oxidation of malonic acid by both [MnO₄]^– and MnO₂ have been studied in an HClO₄ medium. The oxidation product of the organic acid was found to be glyoxylic acid. A reaction mechanism assuming complexation between MnO₂ and malonic acid is suggested. The rate is independent of [H⁺].     

Demetallation of α,β,γ,δ-tetrakis(p-sulfophenyl) porphiniron(III) in mineral acid–alcohol–water media

Demetallation rates of α,β,γ,δ-tetrakis(p-sulfophenyl)porphiniron(III) in hydrochloric acid–ethanol–water, perchloric acid–ethanol–water, and sulfuric acid–alcohol–water media were determined. For a given acidity value H₀ the order of the rates for the three acids was HCl > H₂SO₄ > HClO₄. This is also the order for complex formation between acid anion and iron(III). Consequently ligands as well as protons are involved in the breaking of bonds between the metal and the porphyrin leading to the formation of the activated complex. The log k values for HCl and HClO₄ media were not linearly related to the Hammett acidity function as they were for sulfuric acid–ethanol–water media. The average ΔH? and ΔS?values for the HCl media were 18.4 ± 1.4 kcal/mol and ? 19 ± 3 cal K mol, respectively, in very close agreement with those for H₂SO₄ media despite the difference in H ₀ dependence. For H₂SO₄–alcohol–water media the order of the rates was butanol > propanol > ethanol with little difference between isomeric alcohols.     

Electrolyte Effects on the Electrocatalytic Performance of Iridium-Based Nanoparticles for Oxygen Evolution in Rotating Disc Electrodes

Proton exchange membrane water electrolysers are very promising renewable energy conversion devices that produce hydrogen from sustainable feedstocks. These devices are mainly limited by the sluggish kinetics of the oxygen evolution reaction (OER). Ir-based nanoparticles are both reasonably active and stable for the OER in acidic media. The electrolyte composition and the pH may play a crucial role in electrocatalysis, yet they have been widely overlooked for the OER. Herein, we present a study on the effects of the composition and concentration of the electrolyte on commercial Ir black nanoparticles using concentrations of 0.05 M, 0.1 M and 0.5 M of both sulphuric and perchloric acid. The results show an important effect of the electrolyte composition on the catalytic performance of the Ir nanoparticles. The concentration of H₂SO₄ interferes on the oxidation of Ir and decreases the catalytic performance of the catalyst. HClO₄ does not show strong interferences in the electrochemistry of Ir. Higher catalytic performances are observed in HClO₄ electrolytes in comparison to H₂SO₄ with little effect of the concentration of HClO₄.     

Separation of thorium by anion-exchange chromatography in malic acid media

Summary Systematic studies on the anion-exchange behaviour of thorium in malic acid solution on Amberlite IRA-401 have been carried out. Acids such as HNO₃, HCl, H₂SO₄, HClO₄ and salts such as NH₄Cl, (NH₄)₂SO₄, NaClO₄, NaCl and NaNO₃ have been tested as eluants for thorium, their efficiency being evaluated in terms of their distribution coefficients. HNO₃ is the best eluent for thorium. Methods have been developed for the separation of thorium from several elements in malic acid media using selective adsorption or selective elution. The proposed method is applied to the analysis of thorium in monazite where HClO₄ is a better eluant than HNO₃. The method is simple and the accuracy about ±3%.     

Cerium (IV) oxidation rate of p-chloromandelic acid in perchlorate and sulfate media

The rate of the cerium (IV) oxidation of p-chloromandelic acid has been studied in perchlorate media at an ionic strength of 1.50 mol/dm³ by the stopped-flow technique and in H₂SO₄? MHSO₄ (M⁺ = Li⁺, Na⁺, K⁺) and H₂SO₄? MClO₄ (M⁺ = H⁺, Li⁺, Na⁺) mixtures at constant total electrolyte concentrations of 1.00 and 2.00 mol/dm³ using the conventional spectrophotometric method. In perchlorate media the kinetic data indicate the formation of two intermediate complexes between cerium (IV) and the organic substrate, but only one is significantly involved in the intramolecular electron-transfer process. The oxidation rate is markedly lower in sulfate media, where two reaction paths have been found to contribute to the overall redox reaction. The univalent cations examined exhibit negative specific effects upon the overall oxidation rate increasing in the order H⁺ < Li⁺ < Na⁺ < K⁺. Activation parameters have been also estimated.     

Ruthenium(III)-catalyzed and uncatalyzed kinetic studies on the oxidation of sulfanilic acid by chloramine-T in perchloric acid medium: a mechanistic approach

The kinetics of the oxidation of sulfanilic acid (SAA) by sodium N-chloro-p-toluenesulfonamide (CAT) in the presence and absence of ruthenium(III) chloride have been investigated at 303 K in perchloric acid medium. The reaction shows a first-order dependence on [CAT]_o and a non-linear dependence on both [SAA]_o and [HClO₄] for both the ruthenium(III)-catalyzed and uncatalyzed reactions. The order with respect to [Ru^III] is unity. The effects of added p-toluenesulfonamide, halide, ionic strength, and dielectric constant have been studied. Activation parameters have been evaluated. The rate of the reaction increases in the D₂O medium. The stoichiometry of the reaction was found to be 1:1 and the oxidation product of SAA was identified as N-hydroxyaminobenzene-4-sulfonic acid. The ruthenium(III)-catalyzed reactions are about four-fold faster than the uncatalyzed reactions. The protonated conjugate acid (CH₃C₆H₄SO₂NH₂Cl⁺) is postulated as the reactive oxidizing species in both the cases.     

Extraction of some elements of the groups IV b and VI b with 1-phenyl-3-methyl-4-caproyl-pyrazolone-5 (PMCP) from aqueous mineral acid solutions

Solvent extraction of Cr(VI), Mo(VI), W(VI) and Hf(IV) with 1-phenyl-3-methyl-4-caproyl-pyrazolone-5 (PMCP) in methyl isobutylketone (MIBK), xylene and chloroform (CHCl₃) from mineral acid solutions was studied. Chromium(VI) is not extracted from any of the acids studied (HCl, H₂SO₄ and HClO₄). Molybdenum(VI) is quantitatively extracted by the reagent in xylene and CHCl₃ from HClO₄ and HNO₃ solutions. It is also extracted quantitatively by the reagent in MIBK from HCl, HNO₃ and H₂SO₄ solutions but the participation of the diluent as extractant is considerable. Tungsten(VI) is quantitatively extracted in xylene from 9M HClO₄ solution. MIBK used as diluent also affects its extraction with PMCP. Hafnium(IV) is not extracted from H₂SO₄ solutions while it extracts more than 99% at 3M HNO₃ and above. The extracted species likely are: MoO₂(PMCP)₂, WO₂(PMCP)₂ and Hf(PMCP)₄, respectively.     

Anion-exchange separation of Pt and Pd using perchloric and hydrochloric acid solutions

On Biorad Ag-1X8 anion-exchange resin (200–400 mesh), Pd and Pt may be separated from one another by elution with 0.2M HClO₄, and 5M HClO₄, respectively. If present, Au may be retained by making the elutriants 0.003M in HCl. Alternatively, reduction by H₂SO₃ enables elution of Pt²⁺ with 6M HCl before recovery of Pd²⁺ with 0.2M HClO₄·Ir⁴⁺ is reduced to Ir³⁺ by H₂SO₃ and may be eluted ahead of Pt²⁺ by 2M HCl.     

Mechanistic study of iodide catalysed oxidation of l-glutamic acid by cerium(IV) in aqueous sulphuric acid medium

A minute quantity (10⁻⁶ mol dm⁻³) of iodide catalysed oxidation of l-glutamic acid by Ce^IV has been studied in H₂SO₄ and SO ₄ ²⁻ media. The reaction was first order each in [Ce^IV] and [I⁻]. The order with respect to [l-glutamic acid] was less than unity (0.71). Increase in [H₂SO₄] decreased the reaction rate. The added HSO ₄ ⁻ and SO ₄ ²⁻ decreased the rate of reaction. The added product, succinic acid, had no effect on the reaction rate, whereas added Ce^III retarded the reaction. The ionic strength and dielectric constant did not have any significant effect on the rate of reaction. The active species of oxidant was Ce(SO₄)₂. A suitable mechanism was proposed. The activation parameters were determined with respect to the slow step of the mechanism. The thermodynamic quantities were also determined and discussed.     

Coefficient of ozone mass transfer during its interaction with an aqueous solution of formic acid in a bubble column reactor

A way of determining the coefficient of ozone mass transfer between the gas phase and liquid aqueous phase using a test compound (formic acid) is described. The values of ozone mass transfer coefficient (in aqueous solutions of 0.1–0.55 М HClO₄ and 0–1 М НСООН, and in 0.75 М H₂SO₄, 0.125 М KHSO₄, and 0–2 М НСООН) are determined along with the rate constants of the reaction of О₃ with undissociated НСООН molecules and formate ions at 21 ± 1°С.     

Micellar effect on the reaction of picolinic acid catalyzed chromium(VI) oxidation of dimethyl sulfoxide in aqueous acidic media: A kinetic study

The kinetics and mechanism of picolinic acid (PA) catalyzed oxidation of dimethyl sulfoxide (DMSO) to dimethyl sulfone by chromium(VI) in both aqueous H₂SO₄ and HClO₄ media have been studied in the absence and presence of surfactants at different temperatures. Cr(VI)–PA complex formed in preequilibrium steps is the active oxidant that experiences the nucleophilic attack by DMSO to form a positively charged intermediate ternary complex. Within the proposed ternary complex, an oxygen transfer or a ligand coupling or both occurs to generate the product, dimethyl sulfone. Cr(VI) is ultimately converted to Cr(III)–PA complex. Under the experimental conditions, the process shows a first‐order dependence on each of the reactants (i.e., [Cr(VI)]_T, [PA]_T, [DMSO]_T, and [H⁺]). HCrO₄⁻ has been found kinetically active. The reaction is catalyzed by sodium dodecyl sulfate (SDS, a representative anionic surfactant) monotonically, while cetylpyridinium chloride (CPC, a representative cationic surfactant) retards the reaction continuously. The observed micellar effects have been explained by considering the hydrophobic and electrostatic interaction between the surfactants and reactants. A pseudo‐phase ion exchange (PIE) model has been applied to explain the micellar effect. The Piszkiewicz cooperative model has been applied to determine the kinetic parameters, and it indicates the existence of catalytically productive submicellar aggregates. Because of this reactant‐promoted micellization of the surfactant before or below the cmc value, the present systems do not show any discontinuity at the respective reported cmc values of the surfactants. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 173–181, 2001     

Vinyl polymerization by cobaltic ions in aqueous solution: Part I. Polymerization of methyl methacrylate

Polymerization of methyl methacrylate initiated by cobaltic ions in perchloric, nitric and sulfuric acids was studied in the temperature range 15–25°C. In all three acids, water oxidation occurred as a side reaction. In HClO₄ and HNO₃ media monomer oxidation was shown to be an additional complicating feature. Rates of cobaltic ion disappearance, monomer disappearance, and chain lengths of polymers were measured with variations in [M], [Co³⁺], [H⁺], initially added [Co²⁺], and temperature. In HClO₄ and HNO₃ experimental results favored simultaneous initiation by Co³⁺ and CoOH²⁺ species, while in H₂SO₄, Co³⁺ ions alone were the active entities. An appropriate kinetic scheme to fit all the experimental observations is proposed. The various rate constants were evaluated.