Simulation of two‐phase flow with moving immersed boundaries

A two‐dimensional multi‐phase model for immiscible binary fluid flow including moving immersed objects is presented. The fluid motion is described by the incompressible Navier–Stokes equation coupled with a phase‐field model based on van der Waals' free energy density and the Cahn–Hilliard equation. A new phase‐field boundary condition was implemented with minimization of the free energy in a direct way, to specifically improve the physical behavior of the contact line dynamics for moving immersed objects. Numerical stability and execution time were significantly improved by the use of the new boundary condition. Convergence toward the analytical solution was demonstrated for equilibrium contact angle, the Lucas–Washburn theory and Stefan's problem. The proposed model may be used for multi‐phase flow problems with moving boundaries of complex geometry, such as the penetration of fluid into a deformable, porous medium. Copyright © 2010 John Wiley & Sons, Ltd.     

Application of a vortex method to free surface flows

Vortex methods have found wide applications in various practical problems. The use of vortex methods in free surface flow problems, however, is still very limited. This paper demonstrates a vortex method for practical computation of non-linear free surface flows produced by moving bodies. The method is a potential flow formulation which uses the exact non-linear free surface boundary condition at the exact location of the instantaneous free surface. The position of the free surface, on which vortices are distributed, is updated using a Lagrangian scheme following the fluid particles on the free surface. The vortex densities are updated by the non-linear dynamic boundary condition, derived from the Euler equations, with an iterative Lagrangian numerical scheme. The formulation is tested numerically for a submerged circular cylinder in unsteady translation. The iteration is shown to converge for all cases. The results of the unsteady simulations agree well with classical linearized solutions. The stability of the method is also discussed.     

A weakly compressible MPS method for modeling of open‐boundary free‐surface flow

A mesh‐free particle method, based on the moving particle semi‐implicit (MPS) interaction model, has been developed for the simulation of two‐dimensional open‐boundary free‐surface flows. The incompressibility model in the original MPS has been replaced with a weakly incompressible model. The effect of this replacement on the efficiency and accuracy of the model has been investigated. The new inflow–outflow boundary conditions along with the particle recycling strategy proposed in this study extend the application of the model to open‐boundary problems. The final model is able to simulate open‐boundary free surface flow in cases of large deformation and fragmentation of free surface. The models and proposed algorithms have been validated and applied to sample problems. The results confirm the model's efficiency and accuracy. Copyright © 2009 John Wiley & Sons, Ltd.     

常航速船波势及船波阻力的边界元法

利用满足Laplace方程,线性化自由面条件及无穷远处条件的Havelock兴波源涵数,建立了关于常航速稳态船波势函数的边界积分方程.针对这个积分方程,建立了相应的数值计算方法,编制了一般三维问题的边界元法计算机程序,可用来计算全潜和半潜物体的稳态绕流场及船舶兴波阻力.     

A PIECEWISE–LINEARIZED METHOD FOR ORDINARY DIFFERENTIAL EQUATIONS: TWO–POINT BOUNDARY–VALUE PROBLEMS

Piecewise-linearized methods for the solution of two-point boundary value problems in ordinary differential equations are presented. These problems are approximated by piecewise linear ones which have analytical solutions and reduced to finding the slope of the solution at the left boundary so that the boundary conditions at the right end of the interval are satisfied. This results in a rather complex system of non-linear algebraic equations which may be reduced to a single non-linear equation whose unknown is the slope of the solution at the left boundary of the interval and whose solution may be obtained by means of the Newton–Raphson method. This is equivalent to solving the boundary value problem as an initial value one using the piecewise-linearized technique and a shooting method. It is shown that for problems characterized by a linear operator a technique based on the superposition principle and the piecewise-linearized method may be employed. For these problems the accuracy of piecewise-linearized methods is of second order. It is also shown that for linear problems the accuracy of the piecewise-linearized method is superior to that of fourth-order-accurate techniques. For the linear singular perturbation problems considered in this paper the accuracy of global piecewise linearizat ion is higher than that of finite difference and finite element methods. For non-linear problems the accuracy of piecewise-linearized methods is in most cases lower than that of fourth-order methods but comparable with that of second-order techniques owing to the linearization of the non-linear terms.     

Simulation of free surface flows using the flux‐difference splitting scheme on the hybrid Cartesian/immersed boundary method

In this study, a method is developed to simulate the interaction between free surface flows and moving or deforming boundaries using the flux‐difference splitting scheme on the hybrid Cartesian/immersed boundary method. At each physical time step, the boundary is defined by an unstructured triangular surface grid. Immersed boundary (IB) nodes are distributed inside an instantaneous fluid domain based on edges crossing the boundary. At an IB node, dependent variables are reconstructed along the local normal line to the boundary. Inviscid fluxes are computed using Roe's flux‐difference splitting scheme for immiscible and incompressible fluids. The free surface is considered as a contact discontinuity in the density field. The motion of free surface is captured without any additional treatment along the fluid interface. The developed code is validated by comparisons with other experimental and computational results for a piston‐type wave maker, impulsive motion of a submerged circular cylinder, flow around a submerged hydrofoil, and Rayleigh–Taylor instability. The developed code is applied to simulate wave generation due to a continuously deforming bed beneath the free surface. The violent motion of a free surface caused by sloshing in a spherical tank is simulated. In this case, the free surface undergoes breakup and reconnection. Copyright © 2011 John Wiley & Sons, Ltd.     

不定边界问题的边界元和有限元数学模型

对于不可压缩有势流动,有两类典型的不定边界或可动边界问题,即定常型不定边界如常水位闸门出流、过水坝或过水闸、水堰绕流及射流等,非定常型的不定边界如装液容器内的流体晃动问题.它们的共同特点是自由面位置与形状事先是的,需在计算过程中调整网格作自由面拟合.且由于自由面条件呈强烈非线性,给不确定数值计算带来困难.本文综述了两类不定边界问题的有限元和边界元模式,简述了笔者的一些计算经验.      

Structure and stability of the interface in a magnetizable fluid

The problems of interface stability in magnetizable and polarizable fluids are considered in the case of the surface tension tensor dependent on the electromagnetic field strength. For describing this dependence the model proposed by A.N. Golubyatnikov (1986) is used. The investigation of the internal interface structure showed that for single-component systems, as a rule, the dependence of the surface tension on the field strength corresponds to surface phase properties paramagnetic in the normal and diamagnetic in the tangential direction. It is shown that within the framework of the model adopted the thermodynamic stability of the surface depends on the thickness of the interphase layer. Necessary stability conditions are obtained for plane interfaces in media with a constant magnetic permeability outside the interphase layer. The problem of stability of the horizontal free surface of an ideal magnetic field in an external magnetic field (similar to the problem of stability of the horizontal interface of two polarizable fluids in an external electric field) is solved for an arbitrary orientation of the external field relative to the interface. The stability loss is now accompanied by qualitative effects absent in the case of the surface tension tensor independent of the electromagnetic field strength.     

An ALE finite element method for a coupled Stefan problem and Navier–Stokes equations with free capillary surface

In this article, an ALE finite element method to simulate the partial melting of a workpiece of metal is presented. The model includes the heat transport in both the solid and liquid part, fluid flow in the liquid phase by the Navier–Stokes equations, tracking of the melt interface solid/liquid by the Stefan condition, treatment of the capillary boundary accounting for surface tension effects and a radiative boundary condition. We show that an accurate treatment of the moving boundaries is crucial to resolve their respective influences on the flow field and thus on the overall energy transport correctly. This is achieved by a mesh‐moving method, which explicitly tracks the phase boundary and makes it possible to use a sharp interface model without singularities in the boundary conditions at the triple junction. A numerical example describing the welding of a thin‐steel wire end by a laser, where all aforementioned effects have to be taken into account, proves the effectiveness of the approach.Copyright © 2012 John Wiley & Sons, Ltd.     

Simulating gas–liquid multiphase flow using meshless Lagrangian method

A multiphase flow model has been established based on a moving particle semi‐implicit method. A surface tension model is introduced to the particle method to improve the numerical accuracy and stability. Several computational techniques are employed to simplify the numerical procedure and further improve the accuracy. A particle fraction multiphase flow model is developed and verified by a two‐phase Poiseuille flow. The multiphase surface tension model is discussed in detail, and an ethanol drop case is introduced to verify the surface tension model. A simple dam break is simulated to demonstrate the improvements with various modifications in particle method along with a new boundary condition. Finally, we simulate several bubble rising cases to show the capacity of this new model in simulating gas–liquid multiphase flow with large density ratio difference between phases. The comparisons among numerical results of mesh‐based model, experimental data, and the present model, indicate that the new multiphase particle method is acceptable in gas–liquid multiphase fluids simulation. Copyright © 2014 John Wiley & Sons, Ltd.     

贮腔类三维自由液面动力学问题数值研究

讨论了贮腔类三维自由液面动力学问题的数值研究,将任意的拉格朗日-欧拉运动学描述关系引入到系统的控制方程中,采用任意的拉格朗日-欧拉描述跟踪自由液面,推导了自由面上结点的法向矢量计算公式。采用Galerkin余量法推导了Navier-Stokes方程的空间离散有限元方程,采用三维自由液面上微分几何理论推导了表面张力计算公式。数值研究中考虑了接触角效应,最后进行了三维数值算例分析。     

Numerical solution of steady free‐surface flows by the adjoint optimal shape design method

Numerical solution of flows that are partially bounded by a freely moving boundary is of great importance in practical applications such as ship hydrodynamics. Free‐boundary problems can be reformulated into optimal shape design problems, which can in principle be solved efficiently by the adjoint method. In this work we investigate the suitability of the adjoint shape optimization method for solving steady free‐surface flows. The asymptotic convergence behaviour of the method is determined for free‐surface flows in 2D and 3D. It is shown that the convergence behaviour depends sensitively on the occurrence of critical modes. The convergence behaviour is moreover shown to be mesh‐width independent, provided that proper preconditioning is applied. Numerical results are presented for 2D flow over an obstacle in a channel. The observed convergence behaviour is indeed mesh‐width independent and conform the derived asymptotic estimates. Copyright © 2003 John Wiley & Sons, Ltd.     

An assessment of a parallel,finite element method for three‐dimensional,moving‐boundary flows driven by capillarity for simulation of viscous sintering

A parallel, finite element method is presented for the computation of three‐dimensional, free‐surface flows where surface tension effects are significant. The method employs an unstructured tetrahedral mesh, a front‐tracking arbitrary Lagrangian–Eulerian formulation, and fully implicit time integration. Interior mesh motion is accomplished via pseudo‐solid mesh deformation. Surface tension effects are incorporated directly into the momentum equation boundary conditions using surface identities that circumvent the need to compute second derivatives of the surface shape, resulting in a robust representation of capillary phenomena. Sample results are shown for the viscous sintering of glassy ceramic particles. The most serious performance issue is error arising from mesh distortion when boundary motion is significant. This effect can be severe enough to stop the calculations; some simple strategies for improving performance are tested. Copyright © 2001 John Wiley & Sons, Ltd.     

A stream function–vorticity formulation‐based immersed boundary method and its applications

A new stream function–vorticity formulation‐based immersed boundary method is presented in this paper. Different from the conventional immersed boundary method, the main feature of the present model is to accurately satisfy both governing equations and boundary conditions through velocity correction and vorticity correction procedures. The velocity correction process is performed implicitly based on the requirement that velocity at the immersed boundary interpolated from the corrected velocity field accurately satisfies the nonslip boundary condition. The vorticity correction is made through the stream function formulation rather than the vorticity transport equation. It is evaluated from the firstorder derivatives of velocity correction. Two simple and efficient ways are presented for approximation of velocity‐correction derivatives. One is based on finite difference approximation, while the other is based on derivative expressions of Dirac delta function and velocity correction. It was found that both ways can work very well. The main advantage of the proposed method lies in its simple concept, easy implementation, and robustness in stability. Numerical experiments for both stationary and moving boundary problems were conducted to validate the capability and efficiency of the present method. Good agreements with available data in the literature were achieved. Copyright © 2011 John Wiley & Sons, Ltd.     

Simulation of liquid sloshing in curved‐wall containers with arbitrary Lagrangian–Eulerian method

There are many challenges in the numerical simulation of liquid sloshing in horizontal cylinders and spherical containers using the finite element method of arbitrary Lagrangian–Eulerian (ALE) formulation: tracking the motion of the free surface with the contact points, defining the mesh velocity on the curved wall boundary and updating the computational mesh. In order to keep the contact points slipping along the curved side wall, the shape vector in each time advancement is defined to modify the kinematical boundary conditions on the free surface. A special function is introduced to automatically smooth the nodal velocities on the curved wall boundary based on the liquid nodal velocities. The elliptic partial differential equation with Dirichlet boundary conditions can directly rezone the inner nodal velocities in more than a single freedom. The incremental fractional step method is introduced to solve the finite element liquid equations. The numerical results that stemmed from the algorithm show good agreement with experimental phenomena, which demonstrates that the ALE method provides an efficient computing scheme in moving curved wall boundaries. This method can be extended to 3D cases by improving the technique to compute the shape vector. Copyright © 2007 John Wiley & Sons, Ltd.     

The solution of viscous incompressible jet flows using non‐staggered boundary fitted co‐ordinate methods

A new approach for the solution of the steady incompressible Navier–Stokes equations in a domain bounded in part by a free surface is presented. The procedure is based on the finite difference technique, with the non‐staggered grid fractional step method used to solve the flow equations written in terms of primitive variables. The physical domain is transformed to a rectangle by means of a numerical mapping technique. In order to design an effective free solution scheme, we distinguish between flows dominated by surface tension and those dominated by inertia and viscosity. When the surface tension effect is insignificant we used the kinematic condition to update the surface; whereas, in the opposite case, we used the normal stress condition to obtain the free surface boundary. Results obtained with the improved boundary conditions for a plane Newtonian jet are found to compare well with the available two‐dimensional numerical solutions for Reynolds numbers, up to Re=100, and Capillary numbers in the range of 0≤Ca<1000. Copyright © 2001 John Wiley & Sons, Ltd.     

Exact solutions of thin film flows

This article studies the analytical solutions for two thin film flow problems on a moving belt. The reduction of the equations follows from their Lie point symmetry generators and conservation laws which are valid for the considered boundary conditions also. The solutions for the two problems are developed using the correct and nonlinear boundary condition for the free surface. Mathematica is adopted for some of the analysis.     

Simulation of three‐dimensional flows over moving objects by an improved immersed boundary–lattice Boltzmann method

An improved immersed boundary–lattice Boltzmann method (IB–LBM) developed recently [28] was applied in this work to simulate three‐dimensional (3D) flows over moving objects. By enforcing the non‐slip boundary condition, the method could avoid any flow penetration to the wall. In the developed IB–LBM solver, the flow field is obtained on the non‐uniform mesh by the efficient LBM that is based on the second‐order one‐dimensional interpolation. As a consequence, its coefficients could be computed simply. By simulating flows over a stationary sphere and torus [28] accurately and efficiently, the proposed IB–LBM showed its ability to handle 3D flow problems with curved boundaries. In this paper, we further applied this method to simulate 3D flows around moving boundaries. As a first example, the flow over a rotating sphere was simulated. The obtained results agreed very well with the previous data in the literature. Then, simulation of flow over a rotating torus was conducted. The capability of the improved IB–LBM for solving 3D flows over moving objects with complex geometries was demonstrated via the simulations of fish swimming and dragonfly flight. The numerical results displayed quantitative and qualitative agreement with the date in the literature. Copyright © 2011 John Wiley & Sons, Ltd.     

A divergence‐free interpolation scheme for the immersed boundary method

The immersed boundary approach for the modeling of complex geometries in incompressible flows is examined critically from the perspective of satisfying boundary conditions and mass conservation. It is shown that the system of discretized equations for mass and momentum can be inconsistent, if the velocity is used in defining the force density to satisfy the boundary conditions. As a result, the velocity is generally not divergence free and the pressure at locations in the vicinity of the immersed boundary is not physical. However, the use of the pseudo‐velocities in defining the force density, as frequently done when the governing equations are solved using a fractional step or projection method, combined with the use of the specified velocity on the immersed boundary, is shown to result in a consistent set of equations which allows a divergence‐free velocity but, depending on the time step, is shown to have the undesirable effects of inaccurately satisfying the boundary conditions and allowing a significant permeability of the immersed boundary. If the time step is reduced sufficiently, the boundary conditions on the immersed boundary can be satisfied. However, this entails an unacceptable increase in computational expense. Two new methods that satisfy the boundary conditions and allow a divergence‐free velocity while avoiding the increased computational expense are presented and shown to be second‐order accurate in space. The first new method is based on local time step reduction. This method is suitable for problems where the immersed boundary does not move. For these problems, the first new method is shown to be closely related to the second new method. The second new method uses an optimization scheme to minimize the deviation from the interpolation stencil used to represent the immersed boundary while ensuring a divergence‐free velocity. This method performs well for all problems, including those where the immersed boundary moves relative to the grid. Additional results include showing that the force density that is added to satisfy the boundary conditions at the immersed boundary is unbounded as the time step is reduced and that the pressure in the vicinity of the immersed boundary is unphysical, being strongly a function of the time step. A method of computing the total force on an immersed boundary which takes into account the specifics of the numerical solver used in the iterative process and correctly computes the total force irrespective of the residual level is also presented. Copyright © 2007 John Wiley & Sons, Ltd.