Numerical study of vortex shedding from a rotating cylinder immersed in a uniform flow field

A numerical study is made of the unsteady two‐dimensional, incompressible flow past an impulsively started translating and rotating circular cylinder. The Reynolds number (Re) and the rotating‐to‐translating speed ratio (α) are two controlled parameters, and the influence of their different combinations on vortex shedding from the cylinder is investigated by the numerical scheme sketched below. Associated with the streamfunction (ψ)–vorticity (ω) formulation of the Navier–Stokes equations, the Poisson equation for ψ is solved by a Fourier/finite‐analytic, separation of variable approach. This approach allows one to attenuate the artificial far‐field boundary, and also yields a global conditioning on the wall vorticity in response to the no‐slip condition. As for the vorticity transport equation, spatial discretization is done by means of finite difference in which the convection terms are handled with the aid of an ENO (essentially non‐oscillatory)‐like data reconstruction process. Finally, the interior vorticity is updated by an explicit, second‐order Runge–Kutta method. Present computations fall into two categories. One with Re=10³ and α≤3; the other with Re=10⁴ and α≤2. Comparisons with other numerical or physical experiments are included. Copyright © 2000 John Wiley & Sons, Ltd.     

基于比拟理论的翼型扰流声场数值模拟

从二维模型方程的全离散形式出发,重点分析了差分格式的色散特性和各向异性效应,证实迎风紧致格式比对称格式有更好的色散和各向同性特性,故有利于声场的数值模拟,并采用三阶迎风紧致格式（ＵＣＤ３）和四阶对称紧致格式（ＳＣＤ４）计算了绕ＮＡＣＡ００１２翼型的可压缩非定常流场,并将此流场作为近场声源,运用声学比拟理论对气动声进行模拟。     

A NUMERICAL STUDY OF FLOW PAST A ROTATIONALLY OSCILLATING CIRCULAR CYLINDER

Vortex shedding from a rotationally oscillating circular cylinder in a uniform flow is studied by numerical solutions of the two-dimensional incompressible Navier-Stokes equations using primitive variables. To demonstrate the viability and accuracy of the method, we calculate the approach flow past a rotating cylinder with constant angular velocity. For approach flow past a rotationally oscillating cylinder, the object of the study is to examine the effect of oscillating rotation on the flow structure. In the present study, some basic patterns of vortex shedding can be identified according to our calculated results and are in good agreement with available experiments. In addition, the influence of the oscillating frequency and amplitude on the forces acting on the cylinder is also investigated.     

ONSET OF ASYMMETRY: FLOW PAST CIRCULAR AND ELLIPTIC CYLINDERS

A computational study of the development of two- dimensional unsteady viscous incompressible flow around a circular cylinder and elliptic cylinders is undertaken at a Reynolds number of 10,000. A higher- order upwind scheme is used to solve the Navier–Stokes equations by the finite difference method in order to study the onset of computed asymmetry around bluff bodies. For the computed cases the ellipses develop asymmetry much earlier than the circular cylinder. The receptivity of the computed flows in the presence of discrete roughness and surface vibration is studied. Finally, the role of discrete roughness in triggering asymmetry for flow past a circular cylinder is studied and compared with flow visualization experiments at Re=10,000     

钝体绕流的分隔板控制技术研究进展

钝体是工程中一种常见结构,流体绕过钝体时产生的旋涡脱落易诱发结构振动,进而导致结构破坏．钝体后安装分隔板是一种典型的被动控制技术,分隔板推迟钝体尾流区剪切层之间的相互作用,进而有效改变钝体后旋涡脱落及尾迹特性,延长结构寿命,并且可以利用钝体一分隔板结构进行能量收集．本文全面回顾了利用分隔板进行流动控制和能量收集的研究及...     

NUMERICAL STUDY OF THE BLOCKAGE EFFECTS ON VISCOUS FLOW PAST A CIRCULAR CYLINDER

In various numerical solutions of flow around bluff bodies the unbounded physical domain is replaced by a restricted computational one whose extent depends on the size of the computational grid network. The truncation of the solution domain in the cross-flow direction reduces the computer time required for the solution, but introduces numerical blockage effects which influence considerably the values of the various flow parameters. In the present paper the finite element solution of steady and unsteady flow around a circular cylinder at Re=106 is presented for blockage ratios of 0·05, 0·15 and 0·25. A boundary condition was tested for which the streamfunction values at the outer boundaries were those of the irrotational solution around a circular cylinder. The size of the standing vortices decreases with the blockage ratio when the flow is steady, while the spacing of the vortices decreases in both directions with increasing blockage ratio when the wake becomes unsteady. The hydrodynamic forces on the cylinder and the Strouhal number are magnified as the blockage ratio increases. The application of the streamfunction values derived from the irrotational solution at the outer boundaries reduced blockage effects only at high blockage ratio.     

均匀来流中旋转圆柱黏性绕流的数值研究

从不可压非定常Ｎ－Ｓ方程出发，首次数值求解了均匀来流中圆柱作周向旋转振荡的黏性绕流问题。探讨了旋转角速度振幅、振荡频率及Ｒｅ数等因素对流场结构及其非定常演化过程的影响，并根据计算结果，给出了在旋转振动频率。速度振幅平面内流场涡结构的分区图。     

均匀来流中旋转圆柱黏性绕流的数值研究

从不可压非定常Ｎ－Ｓ方程出发，首次数值求解了均匀来流中圆柱作周向旋转振荡的黏性绕流问题。探讨了旋转角速度振幅、振荡频率及Ｒｅ数等因素对流场结构及其非定常演化过程的影响，并根据计算结果，给出了在旋转振动频率。速度振幅平面内流场涡结构的分区图。     

多重网格法求解轴流压气机内部流场

提出了一种能够与显式时间推进法、有限体积差分格式、粘性体积力法有效地配合使用的有效地配合使用的多重网格法来解轴流压气机内部流场。作者对美国NASA37^#跨音速轴流压气机转子内部流场的数值计算表明,多重网格法的计算结果与试验结果吻合, 同时该多重网格法的收敛速度比不用多重网格法加快了1．5倍。     

紧致插值曲线方法在流向强迫振荡圆柱绕流中的应用

利用紧致插值曲线(constrained interpolation profile method in Zhejiang University, CIP-ZJU) 数学模型, 对低科勒冈-卡朋特(Keulegan–Carpenter) 数KC 静止流体中振荡圆柱以及雷诺数Re = 200 时流向强迫振荡圆柱绕流进行了数值模拟. 模型在直角坐标系统下建立, 采用紧致插值曲线方法作为流场的基本求解器离散了纳维-斯托克斯方程, 基于多相流的理论实现流固耦合同步求解, 利用浸入边界方法处理固体边界. 模拟结果与现有文献结果进行比较, 二者吻合情况较好, 验证了此方法对于计算复杂流动问题的可靠性.      

90°弯管内气固两相湍流流动的数值研究

利用两相湍流KET模型对90°弯管内气固两相湍流流动进行了数值模拟,得到了弯管内两相流动的一些规律,并提出用颗粒动理学压力来定性表征弯管内磨损严重部位,为管道抗磨损设计提供了一定的理论依据。     

NUMERICAL STUDY OF STEADY LAMINAR FLOW THROUGH TUBES WITH MULTIPLE CONSTRICTIONS USING CURVILINEAR CO-ORDINATES

The flow field through tubes with multiple axisymmetric constrictions in tubes was studied numerically. Two practical problem cases were considered and the numerical scheme was developed for both. In the first case there are one, two, three and four constrictions in the tube. The effects of the number of constrictions on wall shear stress, pressure drop, streamline, vorticity and velocity distributions as the flow passes through the tube were studied and the development of the periodicity characteristics was investigated. In the second case there were multiple constrictions in the tube equidistant from each other. For this case the governing equations were reformulated for a module at a sufficient distance downstream from the inlet where the entrance region effects could be ignored and flow field is assumed to repeat itself. The flow field solutions were obtained in this region. The governing equations were formulated in curvilinear co-ordinates and a finite volume discretization procedure was used to solve the problem. The computations were carried out over a range of Reynolds numbers between 50 to 250 for constrictions with 75 percent area reduction. The method is validated by comparing some of the solutions with experimental results.     

双圆柱绕流特性的模拟研究

采用格子Boltzmann方法对低雷诺数下气体绕流圆柱的规律进行了研究. 对比计算了双圆柱在不同圆心距、不同Re数、不同来流速度与双圆柱圆心连线角度的情况下,各个圆柱的受力大小和曳力系数. 结果表明,若Re数为20, 改变圆柱间距,圆柱间距在1.2d和1.4d之间时,下游圆柱所受曳力有极小值;双圆柱间距为1.6d时,双圆柱受到总曳力最小;圆柱间距大于2d时,上游颗粒受到的曳力不再受到下游颗粒的影响. 若圆柱间距为1.2d, 改变雷诺数,Re数在30和40之间,下游圆柱所受曳力有极小值. 另外,来流速度角度对圆柱的受力影响很大. 上述规律为低Re数下圆柱绕流的深入研究与应用打下基础.      

槽道湍流近壁区相干结构的数值模拟

从流动稳定性理论中的共振三波出发，采用类似湍流直接数值模拟中的最小单元概念，用伪谱方法，对槽道湍流近壁区的单个相干结构进行了数值模拟，得到了与实验基本一致的结果，同时也搞清楚了在谱方法中用Ｃｈｅｂｙｓｈｅｖ－τ方法和配置点法哪个更精确的问题。     

A NUMERICAL STUDY OF THE FLOW OVER ELLIPSOIDAL OBJECTS INSIDE A CYLINDRICAL TUBE

A numerical scheme is developed to obtain the flow field around one, two and five ellipsoidal objects inside a cylindrical tube. The scheme uses the Galerkin finite element technique and the primitive variable(u–v–p) formulation. The two-dimensional incompressible Navier–Stokes equations are solved numerically by using the direct mixed interpolation method. A Picard iteration scheme is used for the solution of the resulting system of non-linear algebraic equations. The computer code is verified by checking with known analytical solutions for the flow past a sphere. Results for the shear stress distributions along the ellipsoids, forces and drag coefficients are obtained for different geometric ratios and Reynolds numbers. Some of the intermediate computational results on the velocity fields developed are also reported.     

A high-order characteristics/finite element method for the incompressible Navier-Stokes equations

In this paper we consider a discretization of the incompressible Navier-Stokes equations involving a second-order time scheme based on the characteristics method and a spatial discretization of finite element type. Theoretical and numerical analyses are detailed and we obtain stability results abnd optimal eror estimates on the velocity and pressure under a time step restriction less stringent than the standard Courant-Freidrichs-Levy condition. Finally, some numerical results obtained wiht the code N3S are shown which justify the interest of this scheme and its advantages with respect to an analogous first-order time scheme. © 1997 John Wiley & Sons, Ltd.     

钝体高超声速三维分离流场特性数值研究

以双子星座简化外形为模型，通过有限差分法求解全Ｎ－Ｓ方程，数值研究了高超声速绕流中的三维分离流动特性。来流Ｍ＿∞＝７．０，Ｒｅ＿∞＝４．５×１０￣５，攻角范围为１０°－４０°。首先通过与实验油流照片的比较，证明了本文计算分离结构定性上的正确性。然后研究了不同攻角下背风面三维分离结构的变化，给出了柱段背风区常点型开式分离随攻角变化转变为整体闭式分离的过程，并从物理上分析了这种转变过程的合理性，认为不同分离形态在分离线起始点附近都有共同的压力条件，即垂直于分离线的逆压梯度，因此横向分离可以从常点型开式分离直接转化为闭式分离。     

FINITE DIFFERENCE SIMULATION OF A STRATIFIED TWO-PHASE SYSTEM

SUMMARY

We have analyzed several different approaches for simulating the fluid motion of a stratified two-phase system. The flow regime is transformed to a regular domain for numerical integration and the standard finite difference formulas are applied to discretize the governing and mapping equations. Five different interface iteration schemes that are based on the kinematic condition and the normal stress balance have been derived to update the position of the liquid-liquid interface. We have found that the iterative scheme based on the normal stress balance is more stable and is applicable to a wide range of capillary numbers, and that these appear to be the only sensitive parameter in the stratified two-phase system under consideration.     

高速钢球在水中贯穿过程的数值计算

本文采用二维有限元数值计算方法对水中高速钢球的侵彻贯穿作用及贯穿通道的形成和发展进行了数值模拟计算,给出了钢球侵彻速度水中压力波和空腔发展,这些结果与实验观察较为吻合。本文的工作说明,数值方法可以作为研究创伤力学的重要手段,有着广阔的应用前景。