Calorimetric investigation of the interaction of carbon nanotubes with polystyrene

A simple, scalable procedure that does not require covalent modification of the filler or specialized high shear mixers is described for preparing well‐dispersed carbon nanotube composites. Excellent particle dispersions of multiple‐walled carbon nanotubes (NTs) and carbon black (CB) in polystyrene (PS) are obtained by coating the particles with a <2‐nm layer of PS adsorbed from dilute solution, prior to incorporation in the composite. Improved mechanical properties of composites containing coated particles, especially NT, are demonstrated by dynamic mechanical analysis at low frequency and low amplitude. Formation of a partially immobilized region of polymer surrounding the particles is quantified using flow microcalorimetry with ethyl acetate or methyl ethyl ketone vapor to measure the increase in solvation enthalpy in this region. This calorimetric method is applied to both composites and compacted powder mixtures of NT or CB with PS. The response of integral heat of vapor sorption as a function of particle loading in powder mixtures is similar to percolation curves reported for mechanical and electrical properties of composites. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1821–1834, 2006     

Preparation and characterization of multilayered polymer nanotube dispersions

Despite considerable efforts to synthesize nanotubes using porous alumina or polycarbonate membrane templates, few studies have addressed the resulting nanotube dispersion. We prepared dispersions of multilayered polyethylenimine/maleic anhydride alternating copolymer (PEI/MAAC) nanotubes synthesized with porous alumina templates. After mechanical polishing to remove the residual polymer surface layer from templates and subsequent template dissolution, the multilayered PEI/MAAC nanotubes were easily dispersed in water at neutral pH by polyelectrolyte adsorption, producing nanotube dispersions that were stable for at least 3 months. We characterized the dispersions using phase-contrast optical microscopy, electro-optics, electrophoresis, and viscometry to help understand their colloidal properties in the dilute and semidilute regimes. The dispersions were resistant to salt-induced aggregation up to at least 1 mM NaCl and were optically anisotropic when subjected to an electric field or flow. Interestingly, the electrophoretic mobility of polystyrene sulfonate (PSS)-stabilized nanotubes increases with increasing ionic strength, because of the high surface charge and softness of the adsorbed polyelectrolyte. Furthermore, unlike many rod-like colloid systems, the polymer nanotube dispersion has low viscosity because of weak rotary Brownian motions and strong tendency to shear thinning. At the high shear rates achieved in capillary viscometry experiments, however, we observed a slight shear thickening, which can be attributed to transient hydrocluster formation.     

Fiber containment for improved laboratory handling and uniform nanocoating of milligram quantities of carbon nanotubes by atomic layer deposition

The presence of nanostructured materials in the workplace is bringing attention to the importance of safe practices for nanomaterial handling. We explored novel fiber containment methods to improve the handling of carbon nanotube (CNT) powders in the laboratory while simultaneously allowing highly uniform and controlled atomic layer deposition (ALD) coatings on the nanotubes, down to less than 4 nm on some CNT materials. Moreover, the procedure yields uniform coatings on milligram quantities of nanotubes using a conventional viscous flow reactor system, circumventing the need for specialized fluidized bed or rotary ALD reactors for laboratory-scale studies. We explored both fiber bundles and fiber baskets as possible containment methods and conclude that the baskets are more suitable for coating studies. An extended precursor and reactant dose and soak periods allowed the gases to diffuse through the fiber containment, and the ALD coating thickness scaled linearly with the number of ALD cycles. The extended dose period produced thicker coatings compared to typical doses on CNT controls not encased in the fibers, suggesting some effects due to the extended reactant dose. Film growth was compared on a range of single-walled NTs, double-walled NTs, and acid-functionalized multiwalled NTs, and we found that ultrathin coatings were most readily controlled on the multiwalled NTs.     

Comparison of the stability of multiwalled carbon nanotube dispersions in water

Continuous real-time monitoring of the nanotube concentration in aqueous solution using UV-Vis spectroscopy allows quantitative comparison of the stability of different types of nanotube dispersions. Systematic investigation of the effects of nanotube length and functionalisation for thin multiwalled carbon nanotubes (MWNT) has revealed that shorter MWNT form more stable dispersions than longer nanotubes of the same diameter. MWNT shortened to an average length of approximately 1 microm form stable dispersions in water with concentrations up to 0.013 mg ml(-1) in the absence of surfactants or solubilising functional groups. The introduction of carboxylic or thiol groups on the surface of shortened nanotubes further increases the stability of MWNT dispersions (up to 0.24 mg ml(-1)). The introduction of surfactant or surface charge on MWNT has contrasting effects on functionalised and non-functionalised nanotubes, destabilising and stabilising their dispersions, respectively.     

Interactions between single-walled carbon nanotubes and lysozyme

Dispersions of single-walled and non-associated carbon nanotubes in aqueous lysozyme solution were investigated by analyzing the stabilizing effect of both protein concentration and pH. It was inferred that the medium pH, which significantly modifies the protein net charge and (presumably) conformation, modulates the mutual interactions with carbon nanotubes. At fixed pH, in addition, the formation of protein/nanotube complexes scales with increasing lysozyme concentration. Electrophoretic mobility, dielectric relaxation and circular dichroism were used to determine the above features. According to circular dichroism, lysozyme adsorbed onto nanotubes could essentially retain its native conformation, but the significant amount of free protein does not allow drawing definitive conclusions on this regard. The state of charge and charge distribution around nanotubes was inferred by combining electrophoretic mobility and dielectric relaxation methods. The former gives information on changes in the surface charge density of the complexes, the latter on modifications in the electrical double layer thickness around them. Such results are complementary each other and univocally indicate that some LYS molecules take part to binding. Above a critical protein/nanotube mass ratio, depletion phenomena were observed. They counteract the stabilization mechanism, with subsequent nanotube/nanotube aggregation and phase separation. Protein-based depletion phenomena are similar to formerly reported effects, observed in aqueous surfactant systems containing carbon nanotubes.     

Aqueous dispersion, surface thiolation, and direct self-assembly of carbon nanotubes on gold

We report the efficient aqueous dispersion of pristine HiPco single-walled carbon nanotubes (SWNTs) with ionic liquid (IL)-based surfactants 1-dodecyl-3-methylimidazolium bromide (1) and 1-(12-mercaptododecyl)-3-methylimidazolium bromide (2), the thiolation of nanotube sidewalls with 2, and the controlled self-assembly of positively charged SWNT-1,2 composites on gold. Optical absorption spectra and resonance Raman (RR) data of obtained aqueous SWNT-1,2 dispersions are consistent with debundled and noncovalently functionalized nanotubes whose electronic properties have not been disturbed. Additionally, the dispersion of pristine nanotube material with surfactants 1 and 2 leads to a high degree of purification from carbonaceous particles. The chiralities of the 14 smallest semiconducting HiPco SWNTs in resonance with Raman excitation at 1064 nm (1.165 eV) were determined in SWNT-2 aqueous dispersion using UV-vis-NIR and RR spectra. X-ray photoelectron spectroscopy (XPS) and surface-enhanced resonance Raman scattering (SERRS) spectroscopy of SWNT-2 submonolayers on gold verified the encapsulation of individualized SWNTs with IL surfactants, the cleavage of S-S disulfide bonds formed in aqueous SWNT-2 suspensions, and the direct chemisorption of the SWNT-2 composite on bare gold via the Au-S bond. Aqueous dispersions of SWNTs with IL-based surfactants add biofunctionality to carbon nanotubes by imparting the positive surface charge necessary for interactions with cell membranes. Our technique, which purifies pristine nanotube material and produces water-soluble, positively charged nanotubes with pendent surface-active thiol groups, may also be translated to other carbon nanotubes and carbon nanostructures. Self-assembled, positively charged submonolayers of SWNTs can be further used for applications in cell biology and sensor technology.     

TiO2-MoO3复合纳米管阵列薄膜的制备及其可见光活性

通过阳极氧化的方法制备TiO₂纳米管薄膜, 在MoO₃存在的条件下对该薄膜进行热处理得到TiO₂-MoO₃复合纳米管阵列薄膜. 利用X射线衍射(XRD), 扫描电子显微镜(SEM), X射线光电子能谱(XPS), 电化学阻抗谱(EIS), Mott-Schottky 及光电化学方法对得到的薄膜进行了表征. XRD结果表明, TiO₂-MoO₃复合纳米管薄膜中的TiO₂主要为锐钛矿晶型. SEM实验证实了薄膜纳米管结构的存在, 样品中的MoO₃均匀地分散在TiO₂纳米管表面. 利用XPS方法分析了TiO₂-MoO₃复合纳米管薄膜元素的组成, 结果表明, MoO₃在TiO₂表面形成TiO₂-MoO₃复合纳米管薄膜. 研究了热处理温度以及热处理时间对样品的光电化学性能的影响, 相对于单纯TiO₂纳米管薄膜, 适量引入MoO₃提高了样品在可见光区的光电响应能力, 样品的平带电位负移. 在450 °C热处理60 min制得的TiO₂-MoO₃复合半导体纳米管阵列薄膜光电响应活性最高.     

Cobalt–iron decorated tellurium nanotubes for high energy density supercapacitor

We report the synthesis of cobalt-iron (Co–Fe) decorated tellurium nanotubes (Te NTs) using semiconductive Te NTs as a sacrificial template, following a wet chemical method. The interplay of Co and Fe precursor concentrations incorporated with Te NT, residual hydrazine hydrate, and the negative surface charge of Te NT plays a significant role in obtaining various bimetallic telluride structures. The one-dimensional (1-D) structure of Co–Fe decorated Te NTs with Te NTs in the backbone provides superior conductivity and exhibits high electrochemical performance with battery type electrode behavior. A negative surface charge value of ?18.9 mV for Te NTs is obtained due to the presence of an anionic surfactant as sodium dodecyl sulfate (SDS) forms a bilayer on Te NTs. To tune the energy density performance, the Co–Fe decorated Te NTs electrode is combined with the electric double-layer capacitors (EDLC) type electrode activated carbon (AC). The asymmetric assembly shows an excellent specific capacitance of 179.2 F/g (48.7 mAh/g) at a current density of 0.9 A/g in 4 M KOH electrolyte. More importantly, it exhibits a maximum energy density of 62.1 Wh/kg at a power density of 1,138.2 W/kg under a potential window of 1.58 V. This potential finding shows the significant applicability of Te NTs as a template for the synthesis of bimetallic tellurides with unique morphologies. The synergistic effect from multiple metals and anisotropic morphology is beneficial for energy storage applications.     

Polymer coating of carboxylic acid functionalized multiwalled carbon nanotubes via reversible addition‐fragmentation chain transfer mediated emulsion polymerization

In this work, successful polymer coating of COOH‐functionalized multiwalled carbon nanotubes (MWCNTs) via reversible addition fragmentation chain transfer (RAFT) mediated emulsion polymerization is reported. The method used amphiphilic macro‐RAFT copolymers as stabilizers for MWCNT dispersions, followed by their subsequent coating with poly(methyl methacrylate‐co‐butyl acrylate). Poly(allylamine hydrochloride) was initially used to change the charge on the surface of the MWCNTs to facilitate adsorption of negatively charged macro‐RAFT copolymer onto their surface via electrostatic interactions. After polymerization, the resultant latex was found to contain uniform polymer‐coated MWCNTs where polymer layer thickness could be controlled by the amount of monomer fed into the reaction. The polymer‐coated MWCNTs were demonstrated to be dispersible in both polar and nonpolar solvents. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Analysis of stability of nanotube dispersions using surface tension isotherms

In this paper, we present the analyses of surface tension of surfactant-stabilized dispersions of carbon nanotubes. This method allows one to study interactions of carbon nanotubes with surfactants at different levels of nanotube loading when optical methods fall short in quantifying the level of nanotube separation. Sodium dodecyl sulfate was used as a stabilizing agent to uniformly disperse single-walled carbon nanotubes in an aqueous media. We show that surface tension is very sensitive to small changes of nanotube and surfactant concentrations. The experimental data suggest that, at moderate concentrations, surfactant displaces carbon nanotubes from the air-water interface and the nanotubes are mostly moved into the bulk of the liquid. By analyzing the surface tension as a function of surfactant concentration, we obtained the dependence of critical micelle concentration on nanotube loading. We then constructed the adsorption isotherm for dodecyl sulfate on carbon nanotubes and bundles of carbon nanotubes. The results of these experiments enabled us to extend the phase diagram of the produced dispersions to a broader range of surfactant and nanotube concentrations.     

Biocompatibility and <Emphasis Type="Italic">in vitro</Emphasis> antineoplastic drug-loaded trial of titania nanotubes prepared by anodic oxidation of a pure titanium

TiO₂ nanotube (NT) arrays have been prepared by anodic oxidation of a Ti sheet, and carbon-deposited TiO₂ NT arrays have been prepared by annealing TiO₂ NT arrays in carbon atmosphere. The biocompatibility of the as-prepared NT arrays was investigated by observing the growth of osteosarcoma (MG-63) cells on the NT arrays. The application of the TiO₂ NT arrays as a drug delivery vehicle was investigated. Both the TiO₂ NTs and the carbon-modified TiO₂ NTs have good biocompatibility supporting the normal growth and adhesion of MG-63 cells with no need of extracellular matrix protein coating. The one end-opened TiO₂ NTs can be easily filled with drugs, working as an efficient drug delivery vehicle.     

Directed Assembly of Multi-Walled Nanotubes and Nanoribbons of Amino Acid Amphiphiles Using a Layer-by-Layer Approach

Monodisperse unilamellar nanotubes (NTs) and nanoribbons (NRs) were transformed to multilamellar NRs and NTs in a well-defined fashion. This was done by using a step-wise approach in which self-assembled cationic amino acid amphiphile (AAA) formed the initial NTs or NRs, and added polyanion produced an intermediate coating. Successive addition of cationic AAA formed a covering AAA layer, and by repeating this layer-by-layer (LBL) procedure, multi-walled nanotubes (mwNTs) and nanoribbons were formed. This process was structurally investigated by combining small-angle neutron scattering (SANS) and cryogenic-transmission electron microscopy (cryo-TEM), confirming the multilamellar structure and the precise layer spacing. In this way the controlled formation of multi-walled suprastructures was demonstrated in a simple and reproducible fashion, which allowed to control the charge on the surface of these 1D aggregates. This pathway to 1D colloidal materials is interesting for applications in life science and creating well-defined building blocks in nanotechnology.     

Effect of interfacial interaction on free volumes in phenol-formaldehyde resin-carbon nanotube composites: positron annihilation lifetime and age momentum correlation studies

The phenol-formaldehyde-carbon nanotube composites were characterized for their free volume properties and interfacial interactions between nanotubes and the polymer matrix. The base polymeric material was a novolac type phenol-formaldehyde (PF) condensation resin cross-linked with para-toluene sulfonic acid. Multi-wall carbon nanotubes (MWCNTs) were synthesized using a catalytical chemical vapor deposition method and characterized using high-resolution transmission electron microscopy. The PF resin-carbon nanotubes composites having 2, 5, 10 and 20% (w/w%) MWCNTs were prepared. The crystallinity and morphology of the samples were characterized using X-ray diffraction and scanning electron microscopy. The free volume size in the polymer nanocomposites was observed to increase with the increase in nanotube content. Positron age momentum correlation (AMOC) studies revealed the electronic environment around different positron annihilation sites. The studies showed that ortho-positronium principally annihilates from interfacial regions of polymer and nanotubes in the nanocomposite. The positron lifetime studies together with AMOC measurements indicate an increase in the free volumes at the interface of polymer and MWCNTs in the composite. The free positron intensities showed that the polymer and nanotubes are weakly interacting in this system.     

Solubilizing single‐walled carbon nanotubes with pyrene‐functionalized block copolymers

The effect of pyrene distribution within pyrene‐functionalized random and block copolymers on noncovalent polymer/single‐walled carbon nanotube (SWNT) interactions was investigated. The block copolymers served as superior solubilizing agents in comparison with the random copolymers. Also, increasing the pyrene content within a polymer, while a constant molecular weight was maintained, improved SWNT solubility and therefore had to result in stronger polymer–nanotube interactions. However, increasing the length of the pyrene‐containing block diminished nanotube solubility, likely because of a lower number of polymer chains that were capable of binding to the nanotube surface. Atomic force microscopy and transmission electron microscopy indicated that the polymer–SWNT interactions were capable of partially debundling the nanotubes into individual solvated structures. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1941–1951, 2006     

UV-light mediated decomposition of a polyester for enrichment and release of semiconducting carbon nanotubes

Purification of single-walled carbon nanotubes using conjugated polymers to selectively disperse either semiconducting or metallic nanotubes is effective and has received significant attention. However, the interaction between the conjugated polymer and the nanotube surface is very strong, making it difficult to remove the adsorbed polymer. Here, we report a poly(carbazole-co-terephthalate) polymer that is not only selective for semiconducting carbon nanotubes but can also be largely removed from the nanotube surface via irradiation with UV light. Irradiation of the polymer-nanotube dispersion causes degradation of ester linkages in the polymer backbone, effectively cutting the polymer into fragments that no longer bind strongly to the nanotube surface. Characterization of the electronic nature of the samples was carried out via the combination of absorption, Raman, and fluorescence spectroscopy. In addition, thermogravimetric analysis allowed determination of the amount of polymer left on the nanotube surface after irradiation and indicated that a large proportion of the polymer is removed. The reported methodology opens new possibilities for purification of semiconducting single-walled carbon nanotubes and their isolation from the polymeric dispersant.     

Highly Conductive Carbon Nanotube/Polymer Nanocomposites Achievable?

Carbon nanotubes (NT) have attracted growing interest in recent years as a conducting filler in the development of conductive polymer composites. However, most of experimental results show that the conductivity of NT/polymer composites is significantly lower than expected. Can NTs be an effective conductive filler for improving the electrical conductivity of polymers? In order to answer this question, a continuum model was constructed by introducing effective tunneling conduction in a non‐universal network for the prediction of electrical conductivity of NT/polymer composites. Based on this model, the effect of the microstructure of NT/polymer composites on conductivity was assessed particularly for NT/polyethylene, NT/polyimide, and NT/poly(vinyl alcohol) composites. NT contact resistance and tunneling resistance have significant influences on the conductivity. The effects of the potential barrier of polymer and the tortousity of single‐walled NTs on the conductivity were also analyzed. NTs cannot be considered as a valuable conductive filler for the development of highly conductive polymer composites unless the contact and tunneling resistances are reduced significantly.

     

Preparation of micelle-encapsulated single-wall and multi-wall carbon nanotubes with amphiphilic hyperbranched polymer

The hyperbranched polyester (Boltorn^TM H20) was modified by maleic anhydride and then polystyrene (H20-MAh-PSt) to form amphiphilic micelles in water. The single-wall and multi-wall carbon nanotubes (SWCNTs and MWCNTs, respectively) were encapsulated in the formed micelles through non-covalent interactions. The formed structures were confirmed by FTIR, NMR, GPC, and XPS analysis. The dispersion and aggregation behaviors were observed by TEM and UV-vis and Raman spectroscopic analysis. The results showed that the dispersion performance of the obtained micelle-encapsulated carbon nanotubes in water was greatly improved compared to the pure carbon nanotubes. From the TEM observation, the individual SWCNT structure and the uniform polymer coating around the surface of SWCNT were seen after crosslinking. The Raman spectroscopic measurements also demonstrated that for the crosslinked samples, no effect occurred associated with concentration-dependent carbon nanotube aggregation.     

Fabrication of super-macroporous nanocomposites by deposition of carbon nanotubes onto polymer cryogels

Electrically conducting super-macroporous carbon nanotube/polymer cryogel nanocomposites were fabricated by a novel approach based on deposition of carbon nanotubes (CNTs) onto the inner surface of pre-formed cryogels assisted by cryogenic treatment. Stable aqueous dispersions of multi-walled and single-walled carbon nanotubes were firstly obtained by non-covalent modification of pristine nanotubes with either pyrene containing polydimethylacrylamide or poly(ethylene oxide)₂₆-b-poly(propylene oxide)₄₀-b-poly(ethylene oxide)₂₆ copolymers and, then, exploited for the preparation of nanocomposites. The mechanical and electrical properties of nanocomposite materials were measured and compared to similar materials prepared by established method. The novel approach provided super-macroporous nanocomposites with high electrical conductivity (>10^?2 S/m) at much lower nanotube content (0.12 wt.%).     

Redox modulation of electroosmotic flow in a carbon nanotube membrane

Electroosmotic flow (EOF) is widely used to manipulate solutions in capillaries and microfluidic devices, and more recently in the nanotubes of a carbon nanotube membrane. In all of these applications it is important to control both the rate and direction of EOF through the system, independently of the electric field that drives EOF. For this reason, there has been considerable recent effort devoted to developing ways of modulating the rate and direction of EOF. We describe here a new method, and we use the carbon nanotube membrane (CNM) system to demonstrate this method. This new method entails coating the inside walls of the carbon nanotubes within the CNM with redox-active polymer films. The redox polymer, poly(vinylferrocene), can be reversibly electrochemically switched between an electrical neutral and a polycationic form. This provides a way for controlling both the magnitude and the sign of the surface charge on the nanotube walls, which in turn allows for control of both the rate and direction of EOF through the CNM.     

Structural role of counterions adsorbed on self-assembled peptide nanotubes

Among noncovalent forces, electrostatic ones are the strongest and possess a rather long-range action. For these reasons, charges and counterions play a prominent role in self-assembly processes in water and therefore in many biological systems. However, the complexity of the biological media often hinders a detailed understanding of all the electrostatic-related events. In this context, we have studied the role of charges and counterions in the self-assembly of lanreotide, a cationic octapeptide. This peptide spontaneously forms monodisperse nanotubes (NTs) above a critical concentration when solubilized in pure water. Free from any screening buffer, we assessed the interactions between the different peptide oligomers and counterions in solutions, above and below the critical assembly concentration. Our results provide explanations for the selection of a dimeric building block instead of a monomeric one. Indeed, the apparent charge of the dimers is lower than that of the monomers because of strong chemisorption. This phenomenon has two consequences: (i) the dimer-dimer interaction is less repulsive than the monomer-monomer one and (ii) the lowered charge of the dimeric building block weakens the electrostatic repulsion from the positively charged NT walls. Moreover, additional counterion condensation (physisorption) occurs on the NT wall. We furthermore show that the counterions interacting with the NTs play a structural role as they tune the NTs diameter. We demonstrate by a simple model that counterions adsorption sites located on the inner face of the NT walls are responsible for this size control.