Thermal analysis study of 5,10,15,20-tetrakis (methoxyphenyl) porphyrins and their nickel complexes

The thermal stability in air of 5,10,15,20-tetrakis (4-methoxyphenyl) porphyrin (4-TMPP), 5,10,15,20-tetrakis (3-methoxyphenyl) porphyrin (3-TMPP), and their nickel metallo-complexes (4-TMPP-Ni and 3-TMPP-Ni) has been investigated by thermogravimetry (TG). 4-TMPP and 4-TMPP-Ni exhibit higher thermal stability compared to 3-TMPP and 3-TMPP-Ni. Nickel complexes exhibit a little higher thermal stability than the corresponding porphyrins. The thermal behavior including melting temperature and enthalpy of fusion was determined by differential scanning calorimetry (DSC) and infrared spectra (IR). The activation energies of thermal decompositions of 4-TMPP-Ni and 3-TMPP-Ni were obtained by integral model-free method; the mechanism functions and pre-exponential factors were determined by master plots method. The kinetic models follow the same mechanism function, Avramie-Erofeev equations with integral forms g() = [−ln (l − )]^0.278 and g() = [−ln (l − )]^0.260, respectively.     

Reactions of oxidizing radicals with 2- and 3-aminopyridines: a pulse radiolysis study

Reactions of OH radicals and some one-electron oxidants with 2-aminopyridine (2-AmPy) and 3-aminopyridine (3-AmPy) were studied in aqueous solutions using pulse radiolysis technique. The OH adduct of 2-AmPy at pH 9 has an absorption maximum at 360 nm along with a weak absorption band in the visible region and was found to be reactive with oxygen. The rate constant for its reaction with O₂ was determined to be 1.0×10⁸ dm³ mol⁻¹ s⁻¹. At pH 4 also, the OH adduct of 2-AmPy has an absorption band at 360 nm. However, there are differences in the absorption at other wavelengths. From the plot of ΔOD vs. pH at 340 nm, the pK_a of the OH adduct was determined to be 6.5. Among the specific oxidants, only SO₄^−√ radicals were able to oxidize 2-AmPy. In the case of 3-aminopyridine (3-AmPy), the transient species formed by OH radical reaction at pH 9 has an absorption maximum at 410 nm with shoulder bands on both the sides. Its absorption spectrum at pH 4 was different indicating the existence of a pK value for the OH adduct. pK_a of 3-AmPy-OH radical adduct species was evaluated to be 5.7. This adduct species was also found to be reactive with oxygen (k=7.6×10⁶ dm³ mol⁻¹ s⁻¹). Specific one-electron oxidants like N₃^√, Br₂^−√ C₂^−√ and SO₄^−√ were able to oxidize 3-AmPy indicating that it is easier to oxidize 3-AmPy as compared to 2-AmPy.     

Micellar effects on photoinduced redox reactions of Fe(bpy)2(CN)2

Excitation of solutions of Fe(bipy)₂(CN)₂ by a 266-nm laser pulse produces a hydrated electron and the oxidized complex, Fe(bipy)₂ (CN)₂⁺, in the primary photochemical step, in homogeneous aqueous solution as well as in aqueous solutions containing cetyltrimethylammonium bromide (CTAB) or sodium dodecyl sulfate (SDS) micelles. In all cases nascent hydrated electrons react with ground state Fe(bipy)₂(CN)₂ to form Fe(bipy)₂(CN)₂⁻, and comparison of the decay constants in the three media (H₂O: k = 2.8 × 10¹⁰ M⁻¹ s⁻¹; CTAB: k = 2.9 × 10¹⁰ M⁻¹ s⁻¹; SDS: k = 5.5 × 10⁹ M⁻¹ s⁻¹), shows that the reaction is essentially unaffected by CTAB micelles but is much slower in SDS solution. Similar micellar effects were found for the back reaction between e_aq⁻ and Fe(bpy)₂(CN)₂⁺. Rate constants for the scavenging of the photogenerated hydrated electrons by methyl viologen (MV²⁺) cations and NO₃⁻ anions were measured in the three systems, and the results indicate that for scavenging by MV²⁺ the rate constants are decreased in the micelle systems (k in H₂O, 8.4 × 10¹⁰; CTAB, 3.5 × 10¹⁰ and SDS, 1.58 × 10¹⁰ M⁻¹ s⁻¹), whereas for NO₃⁻ the CTAB micelle decreases while the SDS micelle enhances the scavenging compared to water solution (k in H₂O, 8.3 × 10⁹; CTAB, 7 × 10⁸; and SDS, 2.05 × 10¹⁰ M⁻¹ s⁻¹). For the comproportionation reaction between Fe(bipy)₂(CN)₂⁺ and Fe(bipy)₂(CN)₂⁻ both micelles reduce the rate (k in H₂O, 3.3 × 10¹⁰; CTAB, 2.3 × 10¹⁰; and SDS, 1.05 × 10¹⁰ M⁻¹s⁻¹), but while the reaction of Fe(bipy)₂(CN)₂⁺ with MV⁺ is increased in CTAB compared to water, it is slowed in SDS (k in H₂O, 2.4 × 10¹⁰; CTAB, 8.9 × 10¹⁰; and SDS, 1.8 × 10¹⁰ M⁻¹s⁻¹). All effects observed in these microheterogeneous systems can be uniformly interpreted in terms of Coulombic interactions between the actual reactants and the charged surface of the micelles.     

Time measurement-visual analysis of nickel(II) using autocatalytic reaction with sodium sulfite/hydrogen peroxide system and its application to the length detection-flow analysis

Trace amounts of nickel(II) can function as a trigger (=reaction initiator) in an autocatalytic reaction with the sodium sulfite/hydrogen peroxide system. Based on this finding, sub-μg L⁻¹ levels of nickel(II) were determined by a time measurement using the autocatalytic reaction. The detection range using the above method was 10⁻⁹–10⁻⁵ M, the detection limit (3σ) was 8.1 × 10⁻¹⁰ M (0.047 μg L⁻¹), and the relative standard deviation was 2.66% at nickel(II) concentration of 10⁻⁷ M (n = 7). This method was applied to length detection-flow injection analysis. The detection range for the flow injection analysis was 2 × 10⁻⁹–2 × 10⁻³ M. The detection limit (3σ) was 1.4 × 10⁻⁹ M (0.082 μg L⁻¹), and the relative standard deviation was 1.86 at initial nickel(II) concentration of 10⁻⁶ M (n = 7).     

Effect of monascus pigment derivatives on the electrophoretic mobility of bacteria, and the cell adsorption and antibacterial activities of pigments

Various amino acid derivatives of monascus pigments were synthesized. The effects of pigment derivatives on the pigment adsorption ratio, electrophoretic mobility (EPM) of bacterial cells, and antibacterial activity were investigated under varying conditions of pigment type, pigment concentration, pH, and ionic strength. Two hydrophobic and two hydrophilic derivatives were selected as model pigments. There was a close relationship between the antimicrobial activity and the pigment adsorption ratio. Against Escherichia coli, the hydrophobic l-Tyr and l-Phe derivatives (log P = 3.18 and 3.57) exhibited high antimicrobial activities (MIC = 8 and 16 mg/L) and high cellular adsorption ratios (9.6 and 10.9 mg/L). The hydrophilic l-Glu and l-Asn derivatives (log P = 1.40 and 0.47) exhibited low activities (MIC = 64 and 128 mg/L) and low adsorption ratios (4.7 and 4.0 mg/L). The electrophoretic mobility of 11 different bacteria varied between −1.93 × 10⁻⁸ and −1.19 × 10⁻⁸ m² V⁻¹ s⁻¹ regardless of Gram⁺ or Gram⁻. The l-Phe derivative showed low MIC values (high antimicrobial activities) against bacteria with a high electrophoretic mobility. A positive linearity between the pigment adsorption ratio and the electrophoretic mobility was established. When the four pigment derivatives were added to E. coli solutions, the electrophoretic mobility of cells in all cases sharply increased with an increasing pigment concentration. The mobility value was high for hydrophobic pigment derivatives in descending order of l-Phe (0.8 × 10⁻⁸ m² V⁻¹ s⁻¹), l-Tyr (0.68 × 10⁻⁸ m² V⁻¹ s⁻¹), l-Glu (0.46 × 10⁻⁸ m² V⁻¹ s⁻¹), and l-Asn (0.44 × 10⁻⁸ m² V⁻¹ s⁻¹). Additional adsorption of the hydrophobic derivatives probably occurred due to a hydrophobic interaction between the pigment and the pigment-coated cells. The electrophoretic mobility decreased gradually with an increasing pH and/or ionic strength with both addition and no addition of the pigment derivatives. The pattern of change of the pigment adsorption ratio under varying pH and/or ionic strength values was similar to the pattern for electrophoretic mobility.     

Synthesis and crystal structure of two novel nickel (imidazole) complexes having hydrogen-bonded networks

Two nickel (imidazole) complexes, Ni(im)₆Cl₂·4H₂O (1) and Ni(im)₆(NO₃)₂ (2) (im=imidazole) have been synthesized and characterized by elemental analysis, IR, UV, TG and single crystal X-ray diffraction. 1 crystallizes in the triclinic space group P-1 with a=8.800(6) Å, b=9.081(6) Å, c=10.565(7) Å, =75.058(9)°, β=83.143(8)°, γ=61.722(8)°, V=718.3(8) Å³, Z=1 and R₁ (wR₂)=0.0469 (0.1497). 2 crystallizes in the trigonal space group R-3 with a=12.370(6) Å, b=12.370(6) Å, c=14.782(14) Å, =90.00°, β=90.00°, γ=120.00°, V=1959(2) Å³, Z=3 and R₁ (wR₂)=0.0358 (0.0955). 1 and 2 exhibit different supramolecular network due to their different counter anions and different hydrogen bonding connection. In compound 1, [Ni(im)₆]²⁺ cation and counter anions Cl⁻ alternatively array in an ABAB fashion via N–HCl hydrogen bonding. In compound 2, the plane of each NO₃²⁻ is almost parallel and each NO₃²⁻ connect three different [Ni(im)₆]²⁺ cations via N–HO hydrogen bonding.     

Kinetics study of the gas-phase reactions of C2F5OC(O)H and n-C3F7OC(O)H with OH radicals at 253–328 K

The rate constants, k₁ and k₂ for the reactions of C₂F₅OC(O)H and n-C₃F₇OC(O)H with OH radicals were measured using an FT-IR technique at 253–328 K. k₁ and k₂ were determined as (9.24 ± 1.33) × 10⁻¹³ exp[−(1230 ± 40)/T] and (1.41 ± 0.26) × 10⁻¹² exp[−(1260 ± 50)/T] cm³ molecule⁻¹ s⁻¹. The random errors reported are ±2 σ, and potential systematic errors of 10% could add to the k₁ and k₂. The atmospheric lifetimes of C₂F₅OC(O)H and n-C₃F₇OC(O)H with respect to reaction with OH radicals were estimated at 3.6 and 2.6 years, respectively.     

Calorimetric comparison of the interactions between salivary proteins and Streptococcus mutans with and without antigen I/II

Antigen I/II can be found on streptococcal cell surfaces and is involved in their interaction with salivary proteins. In this paper, we determine the adsorption enthalpies of salivary proteins to Streptococcus mutans LT11 and S. mutans IB03987 with and without antigen I/II, respectively, using isothermal titration calorimetry. In addition, protein adsorption to the cell surfaces was determined spectrophotometrically. S. mutans LT11 with antigen I/II, yielded a much higher, exothermic adsorption enthalpy at pH 6.8 (ranging from −2073 × 10⁻⁹ to −31707 × 10⁻⁹ μJ per bacterium) when mixed with saliva than did S. mutans IB03987 (−165 × 10⁻⁹ to −1107 × 10⁻⁹ μJ per bacterium) at all bacterial concentrations studied (5 × 10⁹, 5 × 10⁸, and 5 × 10⁷ ml⁻¹), largest effects per bacterium being observed for the lowest concentration. However, the enthalpy of salivary protein adsorption to S. mutans LT11 became smaller at pH 5.8. Adsorption isotherms for the S. mutans LT11 showed considerable protein adsorption at pH 6.8 (1.2–2.1 mg/m²), that decreased only slightly at pH 5.8 (1.1–1.6 mg/m²), with the largest amount adsorbed at the lowest bacterial concentration. This suggests that the protein(s) in the saliva with the strongest affinity for antigen I/II is (are) readily depleted from saliva. In conclusion, antigen I/II surface proteins on S. mutans play a determinant role in adsorption of salivary proteins through the creation of enthalpically favorable adsorption sites.     

Enhancement effect of sodium dodecyl benzene sulfonate (SDBS) and its application into voltammetric determination of telmisartan

A sensitive and rapid electrochemical method was developed for the determination of telmisartan based on the enhancement effect of sodium dodecyl benzene sulfonate (SDBS). In 0.1 mol L⁻¹ HClO₄ and in the presence of 7.5 × 10⁻⁵ mol L⁻¹ SDBS, a well-defined and sensitive oxidation peak was observed for telmisartan at the acetylene black (AB) paste electrode. However, the oxidation peak is poor-shaped and the peak current is very low in the absence of SDBS, suggesting that SDBS shows obvious enhancement effect for the determination of telmisartan. After all the experimental parameters were optimized, a sensitive and simple electrochemical method was developed for determining telmisartan. The oxidation peak current is proportional to the concentration of telmisartan over the range from 2.5 × 10⁻⁷ to 2.0 × 10⁻⁵ mol L⁻¹. The detection limit is 7.5 × 10⁻⁸ mol L⁻¹ after 2 min of accumulation. This new voltammetric method was successfully used to detect telmisartan in drugs.     

Heat capacity of copper hydride

The heat capacity of copper hydride has been measured in the temperature range 2–60 and 60–250 K using two adiabatic calorimeters. Special procedure for the purification of CuH has been applied and a careful analysis of sample contamination has been performed. The experimental results have been extrapolated up to 300 K due to instability of the copper hydride at room temperature. From the temperature dependence of heat capacity the values of entropy S°(T), thermal part of enthalpy H°(T)−H°(0) and Gibbs function [−(G°(T)−H°(0))] have been calculated assuming S°(0)=0. The standard absolute entropy, standard entropy of formation from the elements and enthalpy of decomposition of copper hydride from the elements have been calculated and found to be 130.8 J K⁻¹ mol⁻¹ (H₂), −85.1 J K⁻¹ mol⁻¹ (H₂), −55.1 kJ mol⁻¹ (H₂), respectively. These new results gave the possibility of discussion on thermodynamic properties of copper hydride. Debye temperature has been for the first time determined experimentally.     

The molecular structure and the puckering potential function of silacyclobutane as determined by gas electron diffraction and relaxation constraints from ab initio calculations

Gas electron diffraction is applied to determine the geometric parameters of the silacyclobutane molecule using a dynamic model where the ring puckering was treated as a large amplitude motion. The structural parameters and the parameters of the potential function were refined taking into account the relaxation of the molecular geometry estimated from ab initio calculations at the MP2/6-311+G(d, p) level of theory. The potential function has been described as V() = V₀[(/_e)² − 1]² with the following parameters V₀ = 0.82 ± 0.60 kcal/mol and _e = 33.5 ± 2.7°, where is a puckering angle of the ring.

The geometric parameters at the minimum V() (r_a in Å, in degrees and uncertainties given as three times the standard deviations including a scale error) are: r(Si–H_ax) = 1.467(96), r(Si–H_eq) = 1.468(96), r(Si–C) = 1.885(2), r(C–C) = 1.571(3), r(C–H) = 1.100(3), CSiC = 77.2(9), HSiH = 108.3, SiCH_eq = 123.5(16), SiCH_ax = 111.9(16), CC₅H_eq = 118.4(24), CC₅H_ax = 112.3(24), HC₃H = 107.7, δ(HSiH) = 6.6, δ(HC₃H) = 7.0, where the tilts δ, HSiH, and HC₃H are estimated from ab initio constraints. The structural parameters are compared with those obtained for related compounds.     

A dense oxygen separation membrane with a layered morphologic structure

A configuration of dense mixed ionic and electronic conducting (MIEC) membrane with layered morphological structure for oxygen separation, which combines the benefits of high oxygen permeation flux of cobalt-based membrane, high chemical stability of iron-based perovskite and high mechanical strength of thick membrane, was studied. The membrane is normally composed of two layers; each layer is a dense MIEC oxide. The substrate layer is a thick dense membrane with high oxygen permeability but relatively lower chemical stability. The feasibility of dense thick Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3−δ (BSCF5582) membrane as the substrate layer and Ba_0.5Sr_0.5Co_0.2Fe_0.8O_3−δ (BSCF5528) as the thin-film layer was mainly experimentally investigated. Both the BSCF5582 and the BSCF5528 show the same cubic perovskite structure and the similar lattice constant with no detrimental reaction products formed. By optimizing fabrication parameters of a simple dry pressing process, dual-layered membrane, free of cracks, was successfully fabricated. The oxygen permeation flux of a dual-layered membrane with the thin-film BSCF5528 layer facing to the sweep gas reached 2.1 mL cm⁻² min⁻¹ [STP] (1.56 × 10⁻⁶ mol cm⁻² s⁻¹) at 900 °C, which is about 3.5 times higher than that of the BSCF5528 membrane (0.6 mL cm⁻² min⁻¹, [STP] (4.46 × 10⁻⁷ mol cm⁻² s⁻¹) under the same conditions.     

Direct crystallisation of a hydroxy sodalite membrane without seeding using a conventional oven

A double layered hydroxy sodalite membrane was synthesised directly onto a tubular -alumina support without seeding using a conventional hot-air oven. The effect of different synthesis parameters including the water content, ageing period, synthesis time and temperature, on the purity and continuity of the membrane was investigated. The water content was an important factor in controlling the presence of contaminating zeolite phases in the membrane. The optimised membrane which was contaminant free was characterised by XRD, SEM and single gas permeation using He, N₂ and SF₆. The permeance of the three gases through the membrane ranged from 0.8 to 8 × 10⁻⁸ mol m⁻² s⁻¹ Pa⁻¹. The selectivity ( = 2.5–2.7) compared well to the Knudsen diffusion ratio for He/N₂.     

Semi-quantitative trace analysis of nuclear fast red by surface enhanced resonance Raman scattering

The dye nuclear fast red has been detected and determined semi-quantitatively by means of surface enhanced resonance Raman scattering (SERRS) and surface enhanced Raman scattering (SERS), using laser exciting wavelengths of 514.5 and 632.8 nm, respectively, by employing a citrate-reduced silver colloid. A good linear correlation is observed for the dependence of the intensities of the SERRS bands at 989 cm⁻¹ (R=0.9897) and 1278 cm⁻¹ (R=0.9872) on dye concentration over the range 10⁻⁹ to 10⁻⁷ M, when using an exciting wavelength of 514.5 nm. At dye concentrations above 10⁻⁷ M, the concentration dependence of the SERRS signals is non-linear. This is almost certainly due to the coverage of the colloidal silver particles being in excess of a full monolayer of the dye. A linear correlation is also observed for the dependence of the intensities of the SERS bands at 989 cm⁻¹ (R=0.9739) and 1278 cm⁻¹ (R=0.9838) on the dye concentration over the range 10⁻⁸ to 10⁻⁶ M when using an exciting wavelength of 632.8 nm. Strong fluorescence prevented collection of resonance Raman scattering (RRS) spectra from powdered samples or aqueous solutions of the dye using an exciting wavelength of 514.5 nm, but weak bands were observed in the spectra obtained from both powdered and aqueous samples of the dye using an exciting wavelength of 632.8 nm. A study of the pH dependence of SERRS/SERS and UV–VIS absorption spectra revealed the presence of different ionisation states of the dye. The limits of detection for nuclear fast red by SERRS (514.5 nm), SERS (632.8 nm) and visible spectroscopy (535 nm) are 9, 89 and 1000 ng ml⁻¹, respectively.     

Flow injection visible diffuse reflectance quantitative analysis of nickel

Flow injection (FI) methodology, using diffuse reflectance in the visible region of the spectrum, for the analysis of nickel, precipitated in the form of dimethylglyoximate, is presented. A reflectance cell, constructed in polytetrafluoroethylene, using a LED (light emitting diode) as light source and a LDR (light dependent resistor) as detector, is described. The analytical signal (S) correlates with nickel concentration (C) between 1.6 × 10⁻⁴ and 6.6 × 10⁻⁴ mol L⁻¹. This correlation is described by the equation S = −1.108 + 3.314 × 10⁴C − 2.081 × 10⁷C² (r = 0.9996). The experimentally observed limit of detection is about 1.3 × 10⁻⁴ mol L⁻¹, as in lower concentrations the formation of precipitate is not observed. The experimental quantitation limit is about 1.6 × 10⁻⁴ mol L⁻¹. The mean R.S.D. (relative standard deviation) is about 2.7%. Samples containing nickel were analyzed and the results obtained in this method were compared with those of other methods using the statistical Student's t-test.     

Kinetic method for the determination of traces of thyroxine by its catalytic effect on the Mn(III) metaphosphate-As(III) reaction

A new, highly sensitive and simple kinetic method for the determination of thyroxine was proposed. The method was based on the catalytic effect of thyroxine on the oxidation of As(III) by Mn(III) metaphosphate. The kinetics of the reaction was studied in the presence of orthophosphoric acid. The reaction rate was followed spectrophotometrically at 516 nm. It was established that orthophosphoric acid increased the reaction rate and that the extent of the non-catalytic reaction was extremely small. A kinetic equation was postulated and the apparent rate constant was calculated. The dependence of the reaction rate on temperature was investigated and the energy of activation and other kinetic parameters were determined.

Thyroxine was determined under the optimal experimental conditions in the range 7.0 × 10⁻⁹ to 3.0 × 10⁻⁸ mol L⁻¹ with a relative standard deviation up to 6.7% and a detection limit of 2.7 × 10⁻⁹ mol L⁻¹. In the presence of 0.08 mol L⁻¹ chloride, the detection limit decreased to 6.6 × 10⁻¹⁰ mol L⁻¹. The proposed method was applied for the determination of thyroxine in tablets. The accuracy of the method was evaluated by comparison with the HPLC method.     

Flow-injection chemiluminescence determination of tetracyclines with in situ electrogenerated bromine as the oxidant

By designing a novel flow-through electrolytic cell (FEC), bromine was produced near to the surface of the platinum electrode by electrochemical oxidation of acidic KBr. The fast and weak chemiluminescence signal produced by the chemical reaction of the electrogenerated bromine with H₂O₂ was greatly enhanced by tetracyclines Based on these observations, a new, sensitive and simple electrogenerated chemiluminescence (ECL) method for the determination of tetracyclines was developed. Under the optimum experimental conditions, the calibration graphs are linear over the range 3.0×10⁻⁸ to 5.0×10⁻⁵ g ml⁻¹ for tetracycline, 2.0×10⁻⁷ to 2.4×10⁻⁵ g ml⁻¹ for oxytetracycline and 1.0×10⁻⁷ to 5.0×10⁻⁵ g ml⁻¹ for chlortetracycline. The limits of detection (S/N=3) are 1.0×10⁻⁸ g ml⁻¹ for tetracycline, 7.0×10⁻⁸ g ml⁻¹ for oxytetracycline and 1.5×10⁻⁷ g ml⁻¹ for chlortetracycline. For the determination 5.0×10⁻⁷ g ml⁻¹ tetracycline, the relative standard deviation was <5%. The proposed method was used to determine tetracyclines in pharmaceutical formulations.     

Tuning the parameters for fast respirometry

The aerobic bacterial respiration rate is an indicator of microbial growth and metabolism, essential for monitoring the oxidation process and organic load content of samples in a diverse field of application from influent streams in wastewater treatment facilities to industrial fermentations. This paper looks at the influence of parameters, such as culture concentration and volume, sample surface area/volume ratio and headspace volume to achieve optimisation of respirometry measurement and thus design a bench-top respirometric device, based on the monitoring of the pressure changes in a closed chamber where a bacterial culture is allowed to respire in contact with a sample. Contrary to traditional respirometry, the goal is detection of bacterial respiration within 5 min in a minimal sample volume. Both qualitative and quantitative data could be derived using a simple equation and fine-tuning of the micro-manometric parameters of the device, with a most important finding being that minimal headspace volume in combination with elevated bacterial populations maximised absolute pressure change response and favoured high sensitivity at short response time, even though the conditions indicated oxygen-limitation. Furthermore, in comparison with a commercially available respirometer the typical respiration rate of stationary phase P. putida M10 gave oxygen uptake rate (OUR) and specific oxygen uptake rate (SOUR) of 38 μmol l⁻¹ min⁻¹ and 5 μmol g⁻¹ min⁻¹, respectively with the ‘classical’ system, while the μ-Warburg device designed here showed a typical response, for the culture with the same dry cell concentration, of 66 μmol l⁻¹ min⁻¹ for the OUR and 9 μmol g⁻¹ min⁻¹ for the SOUR. The remarkable outcome from this data, therefore, is that it appears that the high surface area/volume geometry of the μ-Warburg device design has achieved less respiration limitation, even though the sample is unstirred. This presents important insight regarding future respirometer design.     

Photoinduced electron transfer dynamics in porphyrin donor dyads

Intramolecular photoinduced electron transfer (PET) processes occurring in dyads with a free base porphyrin-tetraazaanthracene donor (P) and either a tetracyanonaphthoquinidodimethane (TCQ) or benzoquinone (BQ) acceptor linked by a rigid six σ-bond polynorbornane bridge ([6]) have been investigated. For P[6]BQ, PET in the polar solvent benzonitrile (_s = 25.9) occurs with a rate constant (k_PET) of 1.6 × 10⁸ s⁻¹ but is not evident in solvents less polar than tetrahydrofuran (_s = 7.52). For P[6]TCQ, highly efficient forward PET occurs in both polar and non-polar solvents (k_PET > 2 × 10¹⁰ s⁻¹). For P[6]TCQ the lifetime of the resulting charge-separated state decreases markedly with increasing solvent polarity. The results are discussed in the context of the likely mechanisms for electronic coupling and current theories for PET processes in such linked molecular systems.     

Aluminum and lithium octa(pentoxy)phthalocyanine radicals

A lithium phthalocyanine radical and the analogous aluminum phthalocyanine radical were synthesized as part of an investigation of isostructural dopants. An improved synthesis of the free base of octa(pentoxy)phthalocyanine (H₂Pc*) involves the reduction of 1,2-dicyano-4,5-dipentoxybenzene with hydroquinone. Deprotonation with lithium bis(trimethylsilyl)amide leads to the dilithium derivative Li₂Pc* and subsequent oxidation with ferrocenium yields the radical LiPc*. Treatment of H₂Pc* with Et₂AlCl gives ClAlPc* and reduction with sodium amalgam yields AlPc*, the first reported aluminum phthalocyanine radical. In the solid state LiPc* and AlPc* are electrical conductors with pressed-pellet conductivities of 8 × 10⁻¹¹ Ω⁻¹ cm⁻¹ and 5 × 10⁻⁷ Ω⁻¹ cm⁻¹, respectively.