High water solubility and sol–gel transition behavior of titania nanoparticles obtained by an in situ functionalization sol–gel process

Herein, addition reaction occurred between glycidol and partially hydrolyzed Ti⁴⁺ complexes provides a opportunity to obtain dry anatase nanopowder with high redispersity in water. This property is considered to be originated from the two OH groups located in the two ends of glycidol resulted chlorinated propandiol molecules. In aqueous solution, the two OH groups are respectively connected with particle surface and external free water by the formation of hydrogen bonds, resulting in high water redispersity of nanoparticles. Due to the much less amount of chlorinated propandiol molecules than adsorbed molecule water on particle, the wide space between organic molecules facilitates the mutual physical surface touch of individual particles to form hydrogen bond between them. A novel property is then obtained for surface modified titania nanoparticles, which is the gelation of redispered nanoparticles in aqueous solution.     

Synthesis and characterization of sol–gel alumina nanofibers

Abstract Alumina nanofibers of high aspect ratio with surface area of >300 m² g⁻¹ has been prepared successfully in bulk quantities by the sol–gel method. The synthesis parameters including the binary water–alcohol solvent system to aluminium isopropoxide ratio, pH, type of solvent and aging temperature affect the uniformity and formation of nanofibers. It is proposed that alumina nanofibers were formed by the curling of the nanosheets upon condensation after the hydrolysis. The phase evolution of alumina nanofibers from pseudoboehmite to α phase has been shown by XRD and FTIR. ²⁷Al NMR investigations show that the Al atoms are six and four coordinated. The morphology of the alumina nanofibers does not change much as the calcination temperature was increased. In addition, the average pore size increases and the BET surface area decreases as a function of calcination temperature. The thermal behavior of alumina nanofibers was investigated by TGA. Graphical Abstract      

Nonhydrolytic sol–gel and gram-scale synthesis of surfactant-free maghemite nanoparticles with high surface area

An organic molecule was used as a surfactant for nanoparticle synthesis in liquid phase. However, residual molecules on the surface of the nanoparticles limit their catalytic applications, because the interaction of a reactant with the nanoparticle surface is interrupted. Therefore, it is favorable for catalytic applications that the organic molecule used in the synthesis of nanoparticles only induces a sol–gel reaction of the metal precursors and the formation of nanoparticles and hardly adheres to the resulting nanoparticles. Herein, we report surfactant-free and high-surface area maghemite nanostructures via nonhydrolytic sol–gel reaction. Using Fe(acetylacetonate)₃ as an iron precursor and hexylamine as a solvent and growth inhibitor, Fe₂O₃ nanoparticles were generated by nonhydrolysis of the iron complex and condensation at 140 °C under an air atmosphere. Characterization revealed monodisperse nanoparticles with an average size of 2.3 nm and a crystalline phase of maghemite. Residual hexylamine is hardly observed, and thus their specific surface area is 403.7 m²/g. An experimental comparison of the Fe₂O₃ synthesis with hexylamine and benzylamine indicates that the cone angle of an organic molecule is an important factor in the synthesis of nanoparticles with a small size and high surface area.     

Preparation of nanostructured titania thin films by sol–gel technology

This study is concerned with the preparation of hydrolytically active heteroligand complex [Ti(OC₄H₉)_3.61(O₂C₅H₇)_0.39] from titanium butoxide and acetylacetone and with the gel formation kinetics in a solution of this complex upon hydrolysis and polycondensation. Single-layer and double-layer thin films of a solution of this precursor were coated on polished silicon substrates using the dip-coating method. The crystallization of nanostructured titania films during the heat treatment of these xerogel coatings was studied using various protocols; the anatase–rutile phase transition temperature was found to depend on the film thickness. The effects of the precursor solution viscosity on the film thickness and crystallite size were determined.     

Nano-sized blue spectral shift in sol–gel derived mesoporous titania films

Following the spectral energy shift of the energy gap (blue shift) of the TiO₂ sol–gel derived films we have evaluated diameters of the nanocrystallites. The TiO₂ films were deposited by dip-coating technique. Two types of mesoporous films were studied: films with porosity ~16% and refractive index (2.15 at wavelength 633 nm) and films with porosity ~46% and refractive index (1.61 at wavelength 633 nm). High porosity and consequently low refractive index was achieved by adding the non-ionic surfactant Triton X-100 to the starting solution as template. The principal goal of the work is to establish the influence of the Triton X-100 on the morphology as well as to establish a possible correlation between the morphology and optical features of the titania films. The surface morphology was explored using AFM method. And the energy gap was determined from the transmission spectra. Analysis of the blue energy spectral shift is performed following the excitonic model.     

Active sol–gel thin film on nanostructured plasmonic surface

Sol–gel hybrid films based on alkyl bridged polysilsesquioxanes and doped with phenol red molecules, were synthesized for sensing purposes. Doped films changes colour from yellow to orange to red when exposed to hydrochloric acid (HCl) both in solution and gas phases. The synthesis was optimized in order to produce porous films after spin coating. The porosity increases reacting surface area and chemical reactivity of the sensing thin film. Porosity, optical and structural characterizations of these films were investigated by transmission electron microscopy (TEM), Fourier Transform Infrared Spectroscopy (FT-IR) and Spectroscopic Ellipsometry (SE). Variation of optical characteristics upon immersion of the film in the solution was characterized by UV–visible (UV–vis) spectroscopy. Moreover the same porous sensitive hybrid film was deposited on gold sinusoidal grating in order to detect variations of the dielectric film optical constant after HCl solution dip. This variation was revealed by monitoring surface plasmon polariton excitations.     

Nanoporous morphology of alumina films prepared by sol–gel dip coating method on alumina substrate

Nanoporous crack free alumina thin films were fabricated in two phases gamma (??) and alpha (??) by sol?Cgel dip coating method. The thickness of the mesoporous films was increased with binder by varying its concentration, and with increasing the number of coating. The porosity, pore size, surface area and phase were controlled by sintering temperature. Interconnected pore structure of 8?C15?nm diameter were successfully prepared by repeating the deposition several times. FESEM, BET, AFM and XRD techniques were employed for the microstructural characterization.     

Photocatalytic degradation of Orange II by titania addition to sol–gel glasses

Glasses on SiO₂–CaO–ZnO–B₂O₃–K₂O–Al₂O₃ oxide system modified by addition of titania (0, 3, 5, 12, and 20% w) have been prepared by sol–gel method. The obtained gels were aged, dried and fired at 600 °C/1 h in order to stabilise the glass. The resulting fired powders were characterised by UV–Vis–NIR spectroscopy, scanning electron microscopy, transmission electron microscopy (TEM) and X-ray diffraction (XRD). Their photocatalytic capacity on the degradation of Orange II dye has been studied. The XRD and TEM studies indicate that system becomes amorphous with a nanostructured microstructure. From UV–Vis–NIR results the band gap calculated is around 3.5 eV for all modified glasses. Photoactivity of powders depends on amount of titania in glass composition and the specific surface area of prepared samples. The sample with highest surface area and lowest addition of titania (3% w sample) shows similar activity than commercial anatase used as reference.     

Polydimethylsiloxane/silica/titania composites prepared by solvent-free sol–gel technique

Composites based on polydimethylsiloxane incorporating silica and titania were prepared by mixing polydimethylsiloxane with proper oxides precursors, tetraethyl-orthosilicate and tetrabutyl-orthotitanate. In the presence of environmental humidity and in acid catalysis, hydrolysis/condensation processes take place with formation of oxides and concomitantly polymer crosslinking. Partial replacement of SiO₂ in a polydimethylsiloxane/silica composite with titania (both generated in situ by sol–gel process) affects surface hydrophilicity (evaluated by dynamic contact angle), water vapor sorption ability (determined by dynamic vapor sorption) and thermal stability. The dielectric properties are also controlled by composition.     

Gas chromatographic separation of hydrogen isotopes on columns packed with alumina,modified alumina and sol–gel alumina

The stationary phase of alumina adsorbents, prepared by different chemical processes, was used to study the separation behaviour of hydrogen isotopes. Three types of alumina, obtained by conventional hydroxide route alumina coated with silicon oxide and alumina prepared by internal gelation process (IGP), were used as packing material to study the separation of HT and T₂ in a mixture at various temperatures. The conventional alumina and silicon oxide coated alumina resolved HT and T₂ at 77 K temperature with different retention times. The retention times on SiO₂ coated columns were found to be higher than those of other adsorbents. However, the column filled with IGP alumina was found to be ideal for the separation of HT and T₂ at 240 K. The peaks were well resolved in less than 5 min on this column.     

Preparation of photocurable silica–titania hybrid coatings by an anhydrous sol–gel process

Photocurable silica-titania hybrid coatings were prepared through an anhydrous sol–gel process. Moreover, test samples were prepared by the addition of definite ratios of fluoro acrylate oligomers into the formulations to manage the optical properties of transmitted light. Formulations were applied to corona-treated polycarbonate substrates. Upon adding the inorganic component to the coating material, thermal, mechanical, and other properties, such as hardness, gloss, contact angle, and flame resistance were improved. The photocured hybrid films showed an increase in the refractive index with increasing the titanium tetraisopropoxide content. As expected, a decrease was observed in the refractive index of the coatings with the incorporation of fluoro acrylate resin. The surface morphology of the hybrid films was characterized by ESEM analysis. In addition the chemical composition of the surface of the coatings was identified by ESEM–EDS technique. ESEM studies indicated that inorganic particles were dispersed homogenously throughout the organic matrix.     

Template-free sol–gel synthesis of high surface area mesoporous silica based catalysts for esterification of di-carboxylic acids

High surface area mesoporous silica based catalysts have been prepared by a simple hydrolysis/sol–gel process without using any organic template and hydrothermal treatment. A controlled hydrolysis of ethyl silicate-40, an industrial bulk chemical, as a silica precursor, resulted in the formation of very high surface area (719 m²/g) mesoporous (pore size 67 Å and pore volume 1.19 cc/g) silica. The formation of mesoporous silica has been correlated with the polymeric nature of the ethyl silicate-40 silica precursor which on hydrolysis and further condensation forms long chain silica species which hinders the formation of a close condensed structure thus creating larger pores resulting in the formation of high surface mesoporous silica. Ethyl silicate-40 was used further for preparing a solid acid catalyst by supporting molybdenum oxide nanoparticles on mesoporous silica by a simple hydrolysis sol–gel synthesis procedure. The catalysts showed very high acidity as determined by NH₃-TPD with the presence of Lewis as well as Brønsted acidity. These catalysts showed very high catalytic activity for esterification; a typical acid catalyzed organic transformation of various mono- and di-carboxylic acids with a range of alcohols. The in situ formed silicomolybdic acid heteropoly-anion species during the catalytic reactions were found to be catalytically active species for these reactions. Ethyl silicate-40, an industrial bulk silica precursor, has shown a good potential for its use as a silica precursor for the preparation of mesoporous silica based heterogeneous catalysts on a larger scale at a lower cost.     

Synthesis and characterization of high surface area nanosilica from rice husk ash by surfactant-free sol–gel method

A nanosilica powder was obtained by thermal treatment of rice husk ash using the sol–gel method without adding any extra surfactant, and was characterized by several techniques. Fourier transform infrared measurements revealed the similarity of the absorption curves of both standard nanosilica and synthesized nanosilica. From the nitrogen adsorption–desorption analysis followed that the nanosilica showed very high surface area of 653 m²/g, total pore volume of 0.64647 mL/g, and narrow pore radius of about 1.98 nm. Scanning electron microscopy of the nanosilica sample dried at 120 °C showed separated particles, while the particles of the sample sintered at 700 °C were aggregated. The analysis of transmission electron microscopy (TEM) micrographs and showed that about 69 % of particles had their sizes in the range of 20–25 nm. X-ray diffraction measurements showed the amorphous nature of the synthesized silica. Applying the Debye–Scherrer formula provided the value of the mean crystallite size around 26 nm which agreed with the one determined from TEM. The purity of the prepared nanosilica was higher than 95 % silica which was confirmed by means of energy dispersive X-ray analysis.     

Surface plasmon resonance biosensor based on Au nanoparticle in titania sol–gel membrane

A novel surface plasmon resonance (SPR) biosensor for the determination of human IgG was introduced. The biosensor was prepared with three layers of titania sol–gel membrane by vapor deposition. The colloid Au nanoparticle (AuNP) was immobilized in the second layer of titania membrane and the AuNP coupled with rabbit anti-human IgG was encapsulated in the third layer. The AuNP in the second layer of titania membrane was proved to be effective in the sensitivity enhancement of SPR biosensor. The lowest concentration that could be detected obtained by the biosensor with AuNP is about eight times lower than that obtained without AuNP. In addition, the titania sol–gel is a porous homogeneous material that permits analytes to access the encapsulated biomolecule and can provide a controlled environment for the study of biomolecular recognition. The titania sol–gel was also confirmed to be benefit for biomolecule to keep bioactivity, which could offer a good waterish microenvironment. As a result, the modified biosensor exhibits a satisfactory response for human IgG in the concentration range of 0.30–40.00 μg mL^?1 and shows favorable bioactivity for a long time.     

Mechanical properties of titania nanofiber mats fabricated by electrospinning of sol–gel precursor

Flexible mats of titania fibers are prepared by calcination of electrospun polyvinylpyrrolidone fibers containing titanium isopropoxide precursor. Structural investigation of the calcinated nanofibers by X-ray diffraction (XRD) and electron diffraction (ED) combined with the morphologies by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) show the titania fibers, with an average diameter of 180 nm, were comprised of anatase and rutile crystals. The mechanical, chemical and thermal properties of the titania fiber mats are further investigated by the techniques of Instron mechanical tester, thermogravimetric analyzer (TGA), and Fourier transform infrared spectroscopy (FT-IR). The titania fiber mat prepared in this method exhibited a significant flexibility with 461 MPa Young’s modulus.     

Formation and characterization of magnetic barium ferrite hollow fibers with high specific surface area via sol–gel process

The magnetic barium ferrite (BaFe₁₂O₁₉) hollow fibers with a high specific surface area about 22–38 m² g^?1, diameters around 1 μm and a ratio of the hollow diameter to the fiber diameter estimated about 1/2–2/3 have been prepared by the gel-precursor transformation process. The precursor and resulting ferrite hollow fibers were analyzed by thermo-gravimetric and differential scanning calorimetry, infrared spectroscopy, scanning electron microscopy and X-ray diffraction. The specific surface area was measured by the Brunauer–Emmett–Teller method. The gel formed at pH 5.5 has a good spinnability. A pure barium ferrite phase is formed after calcined at 750 °C for 2 h and fabricated of nanograins about 38 nm with a hexagonal plate-like morphology, which are increased to about 72 nm with the calcination temperature increased up to 1050 °C. The barium ferrite hollow fibers obtained at 750 °C for 2 h have a specific surface area 38.1 m² g^?1 and average pore size 6.5 nm and then the specific surface area and average pore size show a reduction tendency with the calcination temperature increasing from 750 to 1050 °C owing to the particle growth and fiber densification. These barium ferrite hollow fibers exhibit typical hard-magnetic materials characteristics and the formation mechanism for hollow structures is discussed.     

Preparation of hollow titania and strontium titanate spheres using sol–gel derived silica gel particles as templates

A facile approach, based on polyelectrolyte-mediated electrostatic adsorption of a water-soluble titanium complex on colloidal templates and hydrothermal treatment, is presented for the formation of hollow titania (TiO₂) and strontium titanate (SrTiO₃) spheres. Monodispersed silica gel particles were prepared by the sol?Cgel method and adopted as core templates. Deposition of a water-soluble titanium complex, titanium (IV) bis(ammoniumlactato)dihydroxide (TALH), on the silica gel particles was carried out via the layer-by-layer assembly technique. Hollow spheres were successfully formed from the core?Cshell particles. The silica gel particles used as core templates dissolved during hydrothermal treatment because of the particles?? undeveloped siloxane network. In addition, the hydrothermal treatment induced crystallization of the hollow shells. Therefore, the hydrothermal treatment played two roles; removal of the silica templates and crystallization of the hollow shells. When deionized water was used, hollow TiO₂ spheres were obtained. Hollow SrTiO₃ spheres could also be formed when an aqueous solution of Sr(OH)₂ was used. The approach presented here could be exploited as a novel and sustainable approach for the fabrication of a range of different inorganic hollow spheres.     

A novel low temperature synthesis technique of sol–gel derived nanocrystalline alumina abrasive

The effect of ball milling process, co-doped seed and two step sintering technique on the properties of sol–gel derived alumina abrasive sintered at low temperature was investigated. The results showed that ball milling time with 10 h can be effective in enhancing the activity of the precursor and the microstructural uniformity of sintered alumina abrasive. A small amount of Al₂O₃–(NH₄)₃AlF₆ co-doped seed addition had potential synergistic effects for reducing α-Al₂O₃ phase transformation temperature and improving the mechanical property of alumina abrasive. A remarkable suppression of grain growth was achieved by controlling sintering temperature with two-step sintering method. Therefore, by using ball milling process, co-doping α-Al₂O₃–(NH₄)₃AlF₆ seed and two-step sintering technique, the sol–gel derived uniform nanocrystalline alumina abrasive is easily achieved at low temperature. Nanocrystalline alumina abrasive prepared at these conditions exhibited excellent mechanical properties and wear resistance compared to fused corundum abrasive and those sol–gel derived corundum abrasive with conventional sintering methods.     

Thermal,chemical and antimicrobial characterization of bioactive titania synthesized by sol–gel method

Journal of Thermal Analysis and Calorimetry - Chemical stability, anticorrosive properties and photocatalytic activity of titanium dioxide (TiO2) are among the most important characteristics for...     

Role of surface-purity in photocatalytic activity of nanocrystalline anatase–titania processed via polymer-modified sol–gel

Nanocrystalline titania powders have been synthesized via conventional and modified sol–gel using an alkoxide precursor for different R, the ratio of molar concentration of water to that of alkoxide precursor, and calcination temperature. The apparent first-order reaction rate-constant obtained for the powder synthesized via conventional sol–gel is comparable with that of commercial Degussa-P25. Conventional sol–gel has been modified using the hydroxypropyl cellulose polymer to increase the specific surface area of the photocatalyst; and hence, to further enhance its photocatalytic activity. Although higher specific surface area and smaller average nanocrystallite size have been obtained for the powders synthesized via modified sol–gel, they exhibit reduced photocatalytic activity relative to that of powders synthesized via conventional sol–gel. The deactivation of the present photocatalyst has been explained on the basis of reduced surface-purity of the powders after processing via modified sol–gel as induced by the presence of surface-residual organic compounds.