Multi-scale theoretical study of support effect on sintering dynamics of Pt

The capability of theoretical durability studies to offer an efficient alternative methodology for predicting the potential performance of catalysts has improved in recent years. In this regard, multi-scale theoretical methods for predicting sintering behavior of Pt on various catalyst supports are being developed. Various types of Pt diffusions depending on support were confirmed by the micro-scale ultra accelerated quantum chemical molecular dynamics (UA-QCMD) method. Moreover, macro-scale sintering behavior of Pt/γ-Al₂O₃, Pt/ZrO₂ and Pt/CeO₂ catalysts were studied using a developed 3D sintering simulator. Experimental results were well reproduced. While Pt on γ-Al₂O₃ sintered significantly, Pt on ZrO₂ sintered slightly and Pt on CeO₂ demonstrated the highest stability against sintering.     

Nanosized metal deposits on titanium dioxide for augmenting gas-phase toluene photooxidation

The build-up of intermediate species on the surface of TiO₂ during gas-phase toluene (C₇H₈) photodegradation has been observed to deactivate the photocatalyst. Nanosized metallic deposits on the TiO₂ surface may enhance the photocatalytic process and improve photocatalyst performance. In this study, noble (Ag, Au) and platinum group (Pt, Pd, Rh) metals, at a nominal loading of 0.5 at.%, were deposited onto Degussa P25 TiO₂ to enhance photocatalyst performance and inhibit deactivation. Pd, Rh and Au deposits delayed photocatalyst deactivation by a factor of 2, while Pt deposits delayed photocatalyst deactivation by a factor of 20, when compared with neat TiO₂. Ag deposits did not improve photocatalyst activity. Metal deposit performance was related to the work function of each metal, however, the Pt finding suggested that these effects are not governed solely by this aspect, but factors such as deposit characteristics and/or thermal catalytic properties of the metals may be influential.     

Hydrophobic Bimetallic Catalysts for H/D Exchange Reaction between Hydrogen and Water

Hydrophobic bimetallic catalysts of Pt-M on styrenedivinylbenzene were prepared, where M represents successively: Ir, Rh, Pd, Cu and Ag. The total metal loading was 0.5 wt% and the weight fractions of the metal M were: 0.0,0.05,0.1,0.25,0.5,0.75 and 1.0. For each sample, the catalytic activity for H/D exchange between hydrogen and water vapor was measured. In case of monometallic catalysts, no activity was detected for M = Cu and M = Ag, and the order of the activity values for the other metals was: Pt < Ir < Rh < Pd. For each bimetallic catalyst, the activity measurements indicated a clear interaction between the platinum and the second metal, thus the activity was significantly increased for M = Ir, increased for M = Rh, decreased for M = Pd, drastically decreased for M = Cu and M = Ag.     

Mössbauer analysis of the state of iridium and platinum in supported catalysts

The state of iridium and platinum in supported noble metal catalysts was investigated by Mössbauer spectroscopy. With iridium, conventional absorption experiments with the 73 KeV γ-rays of¹⁹³Ir were preformed; platinum was studied in source experiments using the 77 KeV resonance in¹⁹⁷Au. First results for pure Pt catalysts on silica supports and for a used automotive catalytic converter are presented. In Pt-rich bimetallic Pt?Ir catalysts on amorphous silica, both Pt and Ir were studied after different treatments.     

Synthesis of nanostructured lean-NO x catalysts by direct laser deposition of monometallic Pt-, Rh- and bimetallic PtRh-nanoparticles on SiO2 support

Monometallic Pt and Rh and bimetallic PtRh catalysts with a highly dispersed noble metal weight loading of ca. 1 wt% were produced via the direct deposition of nanoparticles on different SiO₂ supports by means of pulsed ultra-violet (248 nm) excimer laser ablation of Pt, Rh bulk metal and PtRh alloy targets. Backscattered electron microscopy (BSE), energy dispersive X-ray spectroscopy (EDX), and transmission electron microscopy (TEM) were employed to characterize the deposited nanoparticles, which were found to exhibit narrow size distribution centred around 2.5 nm. The catalytic activities for lean NO _x reduction of the monometallic and bimetallic catalyst samples were investigated in a flow reactor setup in the temperature range 100–400°C using a test gas mixture representative of oxygen rich diesel engine exhaust gas. For comparison a Rh/SiO₂ reference catalyst prepared by a conventional impregnation method was also tested. Further experiments were performed in which PtRh nanoparticles were deposited on a Rh/SiO₂ reference catalyst sample to study the possibility for controlled modification of its activity. The catalytic activity measurements revealed that among the samples solely prepared by laser deposition the PtRh–SiO₂ nanoparticle catalyst showed the highest activity for NO _x reduction at low temperatures 100–300°C. In addition, it could be demonstrated that the initially low NO _x reduction activity and the N₂ selectivity of the Rh/SiO₂ reference catalyst sample for temperatures below 250°C can be enhanced by post laser deposition of PtRh nanoparticles.     

基于约束非平衡溶剂化理论的对硝基苯胺π-π*光谱移动 (cited: 1)

采用共沉淀法制备不同组分类水滑石前驱体Co-M-Al和Co-M-Ce-Al (M=Zn, Ni, Cu)复合氧化物催化剂催化分解N₂O. 结果表明,Co-M-Al系列氧化物催化剂的催化活性Co-Ni-Al系列>Co-Zn-Al系列>Co-Cu-Al系列;CeO₂添加使得催化剂催化活性进一步提高,N₂O分解温度T₅₀和T₉₀均下降80 oC;继续负载碱金属K也使氧化物催化剂催化活性提高,N₂O分解温度T₅₀和T₉₀下降约50 oC.     

Characterization of the metallic phase in nanocrystalline ZnAl2O4-supported Pt catalysts

In this study several complementary methods as XRD, HRTEM, O₂ and H₂ adsorption, as well as H₂-O₂ titration were used for characterization of the metallic phase in 0.5-3.0 wt.% Pt/ZnAl₂O₄ catalysts. Three nanocrystalline ZnAl₂O₄ spinels used as a supports were prepared by the solvothermal and co-precipitation method. It was found that irrespective of the preparation method they form very good support materials with a high capacity to achieve high platinum dispersion. O₂ and H₂ chemisorption data showed metal dispersion up to 90% and good correspondence with HRTEM results was observed. The H₂-O₂ titration method may be applied for determination of Pt dispersion only in the high-loaded Pt/ZnAl₂O₄ catalysts. The catalytic performances of Pt supported on the prepared spinels were evaluated in the propane total oxidation reaction.     

Interfacial properties of Ce<Subscript>0.75</Subscript>Zr<Subscript>0.25</Subscript>O<Subscript>2</Subscript> supported noble metals (Pd,Pt) from first principles

First-principles electronic structure calculations of noble metals (NM=Pd, Pt)/Ce_0.75Zr_0.25O₂ systems are presented. It is found that: the NM adatoms do not prefer to stay at the atop or the bridge sites of the cations (Ce and Zr), but prefer to be adsorbed at or around the anion sites. The most preferable adsorption sites for both the Pd and Pt adatoms are the O-bridge sites neighboring the Zr dopant. The Pt adatom show much stronger interaction with the Ce_0.75Zr_0.25O₂(111) surface than does the Pd adatom. The interactions of the NM/Ce_0.75Zr_0.25O₂(111) interfaces are stronger than those of the corresponding NM/ceria(111) interfaces. There are some metal induced gap states (MIGS) appeared in the gaps of the NM/Ce_0.75Zr_0.25O₂(111) interfaces, which are important to catalytic properties of the NM/Ce_0.75Zr_0.25O₂(111) catalysts.     

Pd与CeO2(111)面的相互作用的第一性原理研究

采用基于广义梯度近似的投影缀加平面波(projector augmented wave) 赝势和具有三维周期性边界条件的超晶胞模型，用第一性原理计算方法，计算并分析了Pd在CeO₂(111)面上不同覆盖度时的吸附能，价键结构和局域电子结构. 考虑了单层Pd和1/4单层Pd两种覆盖度吸附的情况. 结果表明：1)在单层吸附时，Pd的最佳吸附位置是O的顶位偏向Ce的桥位；在1/4单层吸附时，Pd最易在O的桥位偏向次层O的顶位吸附.2) 单层覆盖度吸附时，吸附原子Pd之间的作用较强；1/4单 关键词： 三元催化剂 Pd 2')" href="#">CeO₂ 吸附 密度泛函理论     

Characterization and catalytic performance of pure and Li2O-doped CuO/CeO2 catalysts

Pure and Li₂O-doped CuO/CeO₂ catalysts calcined at 500 °C were prepared by impregnation method. The catalysts are characterized by DTA, TG-DTG, XRD, IR, TEM, nitrogen adsorption at −196 °C and the catalytic decomposition of hydrogen peroxide at 30 °C.The effects of molar ratio, heat treatment time and the doping on the structural, surface and catalytic properties of nanocrystalline Cu/Ce-mixed oxides system have been studied. It was found that the catalytic activity of ceria-supported copper oxide catalysts increased by increasing both the heat treatment time and dopant content. However, the pure Cu/Ce-mixed oxide solids containing 10 wt.% CuO exhibited the best performance. The characterization results indicated that the higher surface area, the formation of solid solution between copper and cerium oxides, and the high dispersion of copper species on the ceria were responsible for the high catalytic activity of the CuO/CeO₂ catalysts.     

使用金属掺杂SnO2(110)作为表面催化剂的电催化CO2还原反应：通过调控Sn:O原子比例来控制产物

电催化CO₂还原反应可以产生HCOOH和CO,目前该反应是将可再生电力转化为化学能存储在燃料中的最有前景的方法之一. SnO₂作为将CO₂转换为HCOOH和CO的良好催化剂,其反应发生的晶面可以是不同的. 其中(110)面的SnO₂非常稳定,易于合成. 通过改变SnO₂(110)的Sn:O原子比例,得到了两种典型的SnO₂薄膜：完全氧化型(符合化学计量)和部分还原型. 本文研究了不同金属(Fe、Co、Ni、Cu、Ru、Rh、Pd、Ag、Os、Ir、Pt和Au)掺杂的SnO₂(110),发现在CO₂还原反应中这些材料的催化活性和选择性是不同的. 所有这些变化都可以通过调控(110)表面中Sn:O原子的比例来控制. 结果表明,化学计量型和部分还原型Cu/Ag掺杂的SnO₂(110)对CO₂还原反应具有不同的选择性. 具体而言,化学计量型的Cu/Ag掺杂的SnO₂(110)倾向于产生CO(g),而部分还原型的表面倾向于产生HCOOH(g). 此外,本文还考虑了CO₂还原的竞争析氢反应. 其中Ru、Rh、Pd、Os、Ir和Pt掺杂的SnO₂(110)催化剂对析氢反应具有较高的活性,其他催化剂对CO₂还原反应具有良好的催化作用.     

Trends in stability, elastic and electronic properties of cubic Rh, Ir, Pd and Pt carbides depending on carbon content: MC versus M4C from first-principles calculations

First principles FLAPW-GGA calculations have been performed to understand the peculiarities of stability, elastic, electronic properties and chemical bonding for cubic carbides of four noble metals M=Rh, Pd, Ir and Pt depending on carbon stoichiometry: MC versus M₄C. Our main findings are as follows: (i) in contrast to mono-carbides MC with positive formation energies E_form>0, carbon-deficient sub-carbides M₄C are stable (E_form<0), thus carbon stoichiometry is one of the major factors determining successful synthesis of these materials, and (ii) as distinct from the majority of other 3d-5d metals (including Pd and Pt examined here), an unusual effect of Rh and Ir “metallization” and the increasing of ductility for these metals owing to the introduction of carbon has been established.     

Mixed-potential-type zirconia-based NOx sensor using Rh-loaded NiO sensing electrode operating at high temperatures

The improvement in sensing characteristics of mixed-potential-type NO₂ sensor based on an yttria-stabilized zirconia (YSZ) plate was examined by an addition of noble metal to NiO sensing-electrode. Among the various noble metals (Pt, Rh, Ir, Pd and Ru) examined, Rh was found to give a significant enhancement in NO₂ sensitivity. In addition, this enhancement was maximum when the Rh content in NiO-SE was 3 wt.%. The sensitivity (emf) to 50 ppm NO₂ was as high as about 77 mV for the sensor using the 3 wt.% Rh-loaded NiO-SE at 800 °C under the wet condition (5 vol.% H₂O). The NO₂ sensitivity was hardly affected by the change of H₂O and CO₂ concentration in the examined range of 5–15 and 5–20 vol.%, respectively, and was almost stable for about 50 days tested at 800 °C. It was speculated that the improved kinetic effect of Rh loading on the cathodic reaction of NO₂ at the interface of SE/YSZ was the major contributing factor for the enhanced NO₂ sensitivity of the sensor.     

Effects of CeO2-ZrO2 present in Pd/Al2O3 catalysts on the redox behavior of PdOx and their combustion activity

The ceria-zirconium-modified alumina-supported palladium catalysts are prepared using impregnation method with H₂PdCl₄ as Pd source, hydrazine hydrate as reducing agent. The physicochemical properties of these catalysts are characterized by BET surface area (BET), X-ray powder diffraction (XRD), transmission electron microscopy (TEM), temperature programmed reduction (H₂-TPR) and temperature programmed oxidation (O₂-TPO) techniques, and their catalytic activities for the combustion of methane are examined. The results show that the palladium mainly exist in a highly dispersed PdO species on Ce-Zr-rich grains as well as Al₂O₃-rich grains surfaces, and a stable PdO species due to the strong interaction between PdO and CeO₂-ZrO₂ on the Ce-Zr/Al₂O₃ surfaces. The catalytic activity is strongly related to the redox behavior of PdO species highly dispersed on Ce-Zr-rich grains and Al₂O₃-rich grains surfaces, and the higher the reducibility of the PdO species, the higher the catalytic activity. The presence of Ce-Zr in Pd/Al₂O₃ catalyst would inhibit the site growth of PdO_x particles and decomposition of PdO to Pd⁰, and the reoxidation property of Pd⁰ to PdO_x is significantly improved, which obviously increases thermal stability and catalytic activity of Pd/Ce-Zr/Al₂O₃ catalyst for the methane combustion.     

The effect of heat treatment on the performance of the Ni/(Zr-Sm oxide) catalysts for carbon dioxide methanation

The active catalysts for methane formation from the gas mixture of CO₂ + 4H₂ with almost 100% methane selectivity were prepared by reduction of the oxide mixture of NiO and ZrO₂ prepared by calcination of aqueous ZrO₂ sol with Sm(NO₃)₃ and Ni(NO₃)₂. The 50 at%Ni-50 at%(Zr-Sm oxide) catalyst consisting of 50 at%Ni-50 at%(Zr + Sm) with Zr/Sm = 5 calcined at 650 or 800 °C showed the highest activity for methanation. The active catalysts were Ni supported on tetragonal ZrO₂, and the activity for methanation increased by an increase in inclusion of Sm³⁺ ions substituting Zr⁴⁺ ions in the tetragonal ZrO₂ lattice as a result of an increase in calcination temperature. However, the increase in calcination temperature decreased BET surface area, metal dispersion and hydrogen uptake due to grain growth. Thus, the optimum calcination temperature existed.     

Partial and complete reduction of O2 by hydrogen on transition metal surfaces

The metal-catalyzed reduction of di-oxygen (O₂) by hydrogen is at the heart of direct synthesis of hydrogen peroxide (HOOH) and power generation by proton exchange membrane fuel cells. Despite its apparent simplicity, how the reaction proceeds on different metals is not yet well understood. We present a systematic study of O₂ reduction on the (111) facets of eight transition metals (Rh, Ir, Ni, Pd, Pt, Cu, Ag, and Au) based on periodic density functional theory (DFT-GGA) calculations. Analysis of ten surface elementary reaction steps suggests three selectivity regimes as a function of the binding energy of atomic oxygen (BE_O), delineated by the opposite demands to catalyze O–O bond scission and O–H bond formation: The dissociative adsorption of O₂ prevails on Ni, Rh, Ir, and Cu; the complete reduction to water via associative (peroxyl, peroxide, and aquoxyl) mechanisms prevails on Pd, Pt, and Ag; and HOOH formation prevails on Au. The reducing power of hydrogen is decreased electrochemically by increasing the electrode potential. This hinders the hydrogenation of oxygen species and shifts the optimal selectivity for water to less reactive metals. Our results point to the important role of the intrinsic reactivity of metals in the selectivity of O2 reduction, provide a unified basis for understanding the metal-catalyzed reduction of O₂ to H₂O and HOOH, and offer useful insights for identifying new catalysts for desired oxygen reduction products.     

Treating NOx emission of hydrogen fueled combustion engines by NOx storage and reduction catalysts: A transient kinetic study including PLIF measurements

NOx storage and reduction (NSR) catalysts are a well-known and broadly used technology to reduce NOx emissions from combustion engines, which may also be applied for hydrogen fueled engines in the future. In this study, Pt- and Pd-based NSR-catalysts were investigated in the absence and presence of water to understand how NO oxidation as well as the storage and reduction phases are influenced by the gaseous environment with H₂ as a reductant. A planar channel configuration was chosen for conducting planar laser-induced fluorescence experiments during the storage phase in addition to steady-state oxidation measurements and transient lean/rich cycles in a packed bed reactor. The presence of steam significantly decreases the NO oxidation activity of both noble metal catalysts. The Pt/BaO/Al₂O₃ catalyst is more active during transient lean/rich cycles, however, it suffers an activity loss during repeated cycles, whereas the activity of the Pd/BaO/Al₂O₃ sample is slightly more stable in the wet gas feed over time. All experiments showed a strong correlation between the NO₂ formation over the catalyst and its storage capability. The influence of water in the exhaust gas on the NSR-catalysts shows a strong temperature dependency on storage and reduction of NO for both catalysts containing Pt and Pd. The storage behavior is also strongly influenced by both the experimental configurations chosen revealing the significance of the interaction of intrinsic catalytic kinetics and mass transfer in the surrounding flow field.     

Laser-assisted activation of dielectrics for electroless metal plating

2 O₃, SiC, diamond, ZrO₂, etc. are presented. The activation of the dielectric surface can be achieved in a wide range of laser wavelengths and is stable in time. This activation allows selective deposition of various metals (Cu, Ni, Pt, Pd, etc.) with lateral dimensions of several μm. The model of the activation process is discussed. This deals with the modification of the band gap of the dielectric, which involves the appearance of a non-zero density of electronic states in the vicinity of the potential of electroless metal reduction. These electronic states can arise either from the formation of point defects in the ablated surface (for example, F centers in Al₂O₃, CeO₂, or ZrO₂) or from the band bending of the dielectric caused by residual mechanical stresses left in the material after laser ablation (SiC or diamond). The data on the activation of dielectrics by mechanical indentation are qualitatively consistent with the model. Received: 5 January 1998/Accepted: 7 January 1998     

The surface properties and the activities in catalytic wet air oxidation over CeO2-TiO2 catalysts

No-noble metal CeO₂-TiO₂ catalysts prepared by sol-gel method were developed and examined for catalytic wet air oxidation (CWAO) of acetic acid. The structure of the catalysts was measured by BET, SEM, XRD, XPS and DTA-TG. We investigated the effect of the interactions of Ce and Ti on the structure of CeO₂-TiO₂ catalysts. The mechanisms of the relationships between the different content of Ti and the activity of CeO₂-TiO₂ catalysts were discussed. The results showed that the average crystal size of CeO₂ decreased and the surface areas increased; the low valence of Ce³⁺ increase, and the chemisorbed oxygen slightly decreased with the increase of Ti content on the surface of CeO₂-TiO₂ catalysts. The order of the activity in CWAO of acetic acid followed: Ce/Ti 1/1 > Ce/Ti 3/1 > Ce/Ti 1/3 > Ce/Ti 5/1 > CeO₂ > TiO₂ > no catalyst. In CWAO of acetic acid, the optimal atomic ratio of Ce and Ti was 1, and the highest COD removal was over 64% at 230 °C, 5 MPa and 180 min reaction time over Ce/Ti 1/1 catalyst. The excellent activity and stability of CeO₂-TiO₂ catalysts was observed in our study.     

Morphology Control of Platinum Nanoparticles and their Catalytic Properties

Platinum nanoparticles with different morphology were prepared by reduction of K₂PtCl₄ solution in the presence of different capping polymers. It was found that the shapes and the sizes of the Pt nanocrystals resulted were related to the kind of capping polymer used. When poly(vinylpyrrolidon) (PVP), poly(N-isopropylacrylamide) (NIPA) and sodium poly(acrylate) (SPA) were used as capping agents, the dominant shapes of the Pt nanocrystals observed by transmission electron microscopy were hexagonal (62%), square (67%) and triangular (41%), respectively. The average sizes of Pt nanocrystals were 6.9, 13.6 and 14.6 nm for capping polymers of PVP, NIPA and SPA, respectively. The colloidal Pt nanoparticles with different morphologies were supported on -Al₂O₃ (1 wt.% Pt) and then their catalytic activity for NO reduction by CH₄ was tested in the 350–600°C temperature range. Additionally, the catalytic activities of these alumina-supported Pt nanocrystals were compared with a conventional catalyst having the average size of Pt particles of 2.4 nm. Over the alumina-supported Pt nanocrystals as compared with the conventional Pt/Al₂O₃, it was observed that the NO/CH₄ reaction yields to NH₃ and CO decreased significantly and on the other hand, the yield to N₂O increased. The experimental results are suggesting that the catalytic behavior can be tuned in a convenient way through the morphological control of the metal nanoparticles.