Tb0.3Dy0.7Fe2合金的本构参数辨识方法研究

建立了一种简便的、适用于磁畴模型应用的Tb_0.3Dy_0.7Fe₂ 合金本构参数辨识方法. 针对Tb_0.3Dy_0.7Fe₂合金磁畴模型中本构参数不明确且直接实验测试困难的问题, 提出了一种数值计算与实验测试相结合的参数辨识方法. 采用坐标变换与绘制自由能等势曲线相结合的方法, 简化了载荷作用下Tb_0.3Dy_0.7Fe₂ 合金内磁畴角度偏转的数值计算, 研究了合金磁畴角度偏转模型的参数依赖性. 在此基础上, 结合简单的实验测试, 建立了Tb_0.3Dy_0.7Fe₂合金各向异性常数K₁ 和K₂、能量分布因子ω、晶轴取向分布的辨识及修正方法. 该方法能够简单、快速地完成Tb_0.3Dy_0.7Fe₂ 合金磁畴模型中本构参数的辨识, 对完善磁致伸缩材料磁畴偏转的数值计算模型非常有意义. 理论分析可为类磁致伸缩材料磁机耦合模型的建立、完善, 以及材料本构参数的辨识、获取提供参考.     

Tb0.3Dy0.7(Fe1-xAlx)1.95合金的磁致伸缩、自旋重取向和穆斯堡尔谱研究

系统研究了室温下Tb0.3Dy0.7(Fe1-xAlx)1.95(x=0,0.05,0.1,0.15,0.2,0.25,0.3,0.35)合金中金属Al替代Fe对晶体结构、磁致伸缩、各向异性和自旋重取向的影响.结果发现,x<0.4时,Tb0.3Dy0.7(Fe1-xAlx)1.95完全保持MgCl2立方Laves相结构,晶格常量a随Al含量x的增加而增大.磁致伸缩测量发现,随着替代量x的增多磁致伸缩减小,x>0.15时超磁致伸缩效应消失 x<0.15时磁致伸缩在低场下(H≤4kAm)有小幅增加,高场下迅速减小,而且易趋于饱和,说明添加少量Al有助于减小磁晶各向异性.内禀磁致伸缩λ111随Al替代量x的增加大幅度降低.对于0≤x<0.15,穆斯堡尔效应表明,随Al含量的增加Tb0.3Dy0.7(Fe1-xAlx)1.95合金中发生了自旋重取向,易磁化方向经历了[111]→[uv0]→[uvw]的转变.由相对磁化率随温度的变化关系可以看出,Al替代Fe使自旋重取向温度降低.当x=0.15时,Tb0.3Dy0.7(Fe1-xAlx)1.95合金中出现了少量非磁性相 x>0.15时,合金在室温下呈现顺磁性 关键词： 磁致伸缩 立方Laves相 自旋重取向 各向异性 穆斯堡尔谱     

Tb0.3Dy0.7Fe2合金磁畴偏转研究

研究了Tb_0.3Dy_0.7Fe₂合金在压磁和磁 弹性效应中的磁畴偏转和磁导率特性. 基于Stoner-Wolhfarth 模型能量极小原理, 绘制了自由能与磁畴偏转角度的关系曲线, 研究了压应力和磁场载荷作用下磁畴角度的偏转特性, 计算分析了不同载荷作用下磁畴偏转的磁导率特性, 并与实验数据进行比较论证. 研究表明,应力和磁场的作用都将使磁畴方向[111]和[111]发生角度跃迁, 直观有效地解释了材料巨磁致伸缩效应的机理; 应力和磁场作用下磁畴的偏转将使材料磁导率呈减小趋势, 其中磁场能对磁导率的影响大于应力能, 这一现象在小载荷作用下尤为明显. 实验结果表明, 磁导率的计算数据与实验数据符合得较好, 验证了计算方法的正确性. 理论分析对Terfenol-D磁畴偏转模型的完善 和磁化过程中磁滞回线的绘制非常有意义.     

Tb0.3Dy0.7Fe2合金磁畴偏转的滞回特性研究

研究了不同载荷作用下Tb_0.3Dy_0.7Fe₂合金在压磁和磁弹性效应中磁畴偏转的滞回特性. 基于Stoner-Wolhfarth模型的能量极小原理, 采用绘制自由能-磁畴偏转角度关系曲线的求解方法, 研究了压磁和磁弹性效应中载荷作用下的磁畴角度偏转和磁化过程, 计算分析了不同载荷作用下磁畴偏转的滞回特性. 研究表明, 压磁和磁弹性效应中磁畴偏转均存在明显的滞回、跃迁效应, 其中磁化强度的滞回效应来源于磁畴偏转的角度跃迁; 压磁效应中预加磁场的施加将增大磁化强度的滞回, 同时使滞回曲线向大压应力方向偏移; 磁弹性效应中磁畴偏转的滞回存在两个临界磁场强度, 不同磁场强度下合金具有不同的磁畴偏转路径和磁化滞回曲线, 临界磁场强度的大小取决于预压应力的施加. 理论分析对类磁致伸缩材料磁畴偏转模型的完善和材料器件的设计应用非常有意义.     

Tb0.3Dy0.7(Fe1-xAlx)1.95合金的磁致伸缩、自旋重取向和穆斯堡尔谱研究

系统研究了室温下Tb0.3Dy0.7(Fe1-xAlx)1.95(x=0,0.05,0.1,0.15,0.2,0.25,0.3,0.35)合金中金属Al替代Fe对晶体结构、磁致伸缩、各向异性和自旋重取向的影响.结果发现,x<0.4时,Tb0.3Dy0.7(Fe1-xAlx)1.95完全保持MgCl2立方Laves相结构,晶格常量a随Al含量x的增加而增大.磁致伸缩测量发现,随着替代量x的增多磁致伸缩减小,x>0.15时超磁致伸缩效应消失;x<0.15时磁致伸缩在低场下(H≤4kA/m)有小幅增加,高场下迅速减小,而且易趋于饱和,说明添加少量Al有助于减小磁晶各向异性.内禀磁致伸缩λ111随Al替代量x的增加大幅度降低.对于0≤x<0.15,穆斯堡尔效应表明,随Al含量的增加Tb0.3Dy0.7(Fe1-xAlx)1.95合金中发生了自旋重取向,易磁化方向经历了[111]→[u v 0]→[u v w]的转变.由相对磁化率随温度的变化关系可以看出,Al替代Fe使自旋重取向温度降低.当x=0.15时,Tb0.3Dy0.7(Fe1-xAlx)1.95合金中出现了少量非磁性相;x>0.15时,合金在室温下呈现顺磁性.     

Tb0.3Dy0.7(Fe1-xAlx)1.95合金的自旋重取向和穆斯堡尔

系统研究了室温和77K温度时Tb0.3Dy0.7(Fe1-xAlx)1.95(x=0,0.05,0.1,0.15,0.2,0.25,0.3,0.35)合金中金属Al替代Fe对自旋重取向和穆斯堡尔谱的影响. 结果发现,Tb0.3Dy0.7(Fe1-xAlx)1.95合金的易磁化方向随成分和温度在{110}面逐渐偏离了立方晶体的主对称轴,即自旋重取向. 室温下,当x=0.15时,Tb0.3Dy0.7(Fe1-xAlx)1.95合金中出现了少量非磁性相;x>0.15时,合金完全呈顺磁性;而77K温度下,x=0.2时合金仍然呈磁性相. 在室温和77K温度时,超精细场Hhf均随Al元素的增加而减小,而同质异能移IS随Al元素的增加而增加,四极劈裂QS随Al含量呈无规律的变化.     

Tb2Fe15.5Cr1.5化合物的本征磁致伸缩

通过x射线衍射及磁测量手段研究了Tb2 Fe1 5 5Cr1 5化合物的热膨胀性质及本征磁致伸缩性质 .研究结果表明Tb2 Fe1 5 5Cr1 5化合物在 2 93— 6 72K的温度范围内具有六角相的Th2 Ni1 7型结构 .在 4 32— 5 2 2K的温度范围内具有负热膨胀性质 ,其平均热膨胀系数 α =- 1 5 7× 10 - 5 K .对本征磁致伸缩的研究结果表明Tb2 Fe1 5 5Cr1 5化合物中存在着较强的各向异性的本征磁致伸缩 ,2 93K时其本征体磁致伸缩约为 8. 4× 10 - 3,晶格畸变主要发生在c轴方向上 .磁测量研究结果表明Tb2 Fe1 5 5Cr1 5化合物的居里温度约为 4 94K ,比其母合金Tb2 Fe1 7高约 80K .     

Tb0.3Dy0.6Pr0.1(Fe1-xAlx)1.95合金的磁性、磁致伸缩和穆斯堡尔谱研究

系统研究了室温下Tb0.3Dy0.6Pr0.1(Fe1-xAlx)1.95(x=0.05,0.1,0.15,0.2,0.25,0.3)合金中元素Al替代Fe对结构、磁性、磁致伸缩性能和自旋重取向的影响.测量结果发现,x<0.2时Tb0.3Dy0.6Pr0.1(Fe1-xAlx)1.95合金基本上是纯的单相,x=0.2时出现其他杂相,杂相随Al替代量的增加不断增多.随Al替代量x的增加,点阵常数a接近于线性增大,Curie温度TC逐渐下降,而矫顽力Hc急剧下降.振动样品磁强计(VSM)测量发现,磁化强度M随Al替代量x的变化较为复杂.VSM计和磁致伸缩效应测量共同表明,少量Al的替代有利于降低磁晶各向异性,而且随着Al替代量x的增多磁致伸缩系数快速减小,x>0.15时巨磁致伸缩效应消失.穆斯堡尔效应研究发现,随Al含量的增加Tb0.3Dy0.6Pr0.1(Fe1-xAlx)1.95合金中易磁化轴可能在{110}面逐渐偏离了立方晶体的主对称轴,发生自旋重取向,从而引起合金宏观磁性、磁致伸缩性能的变化.     

压应力对Fe0.81 Ga0.19单晶磁化和磁致伸缩的影响

研究了Fe_0.81Ga_0.19合金单晶沿[100]方向的磁机械效应和磁致伸缩效应.基于Stoner-Wohlfarth模型,通过数值计算获得了在压应力和外磁场联合作用下磁化强度的方向余弦.研究表明,随着压应力的增加,退磁态下合金中的磁各向异性会由三轴各向异性向双轴各向异性转变.这使得合金中 90° 畴的体积分数增加,导致磁致伸缩效应增大. 关键词： FeGa合金 磁机械效应 巨磁致伸缩效应     

Dy2 AlFe13 Mn3 化合物的本征磁致伸缩

通过X-射线衍射及磁测量手段研究了Dy2AlFe13Mn3化合物的结构及磁性质。研究结果表明Dy2AlFe13Mn3化合物具有六角相的Th2Ni17型结构。通过X-射线热膨胀测定法发现Dy2AlFe13Mn3化合物在245到344K的温度范围内存在负热膨胀现象，其平均热膨胀系数为α＝-1.1×10-4K-1K-1。在105到360K的温度范围内，通过比较磁性状态下的晶胞参数和由高温顺磁状态外延得到的低温顺磁状态下的晶胞参数间的差别计算了Dy2AlFe13Mn3化合物的本征磁致伸缩。结果表明Dy2AlFe13Mn3化合物的本征体磁致伸缩ωS在105到245K的温度范围内随着温度的升高而增大，由105K时的7.0×10-3 增加到245K时的9.1×10-3。随着温度的进一步升高，ωS反而减小。沿c轴方向的本征线磁致伸缩λc随着温度的升高而减小。基面内的本征线磁致伸缩λa在105到270K的温度范围内随着温度的升高而增大，从105K时的0.8×10-3增大到270K时的3.4×10-3，然后随着温度的进一步升高而减小。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.     

Fiber Modal Index Measurements Based on Fiber Gratings

A novel method based on fiber gratings for measuring the effective indices of fiber modes is proposed. The effective index difference between the core mode and a cladding mode was obtained by analyzing the interference fringe of a pair of cascaded long-period fiber gratings. In order to extract the core mode index from the measured index difference, an index matching oil immersion method is proposed. By analyzing the interaction between the cladding mode and the oil applied on the cladding surface, the mode order and the effective index of the involved cladding mode might be calculated. Experimental results about the interference fringe shifts induced by the oil index and the oil-applied length are also presented.     

Optical Pulse Compression Schemes That Use Nonlinear Bragg Gratings

Nonlinear optical pulse compression of picosecond pulses typically requires long lengths of optical fiber and multiple components. Periodic structures, such as fiber Bragg gratings, are highly dispersive at wavelengths outside of the photonic bandgap. This implies that such gratings can be used as very short all-fiber compressors. In this paper a number of such compression schemes are reviewed involving uniform and nonuniform fiber Bragg gratings, relying on both soliton and nonsoliton compression principles. Experimental results supporting the corresponding underlying theory are also presented. Finally, an extension of one of the compression schemes is shown, which allows the generation of adjustable high-repetition rate soliton trains.