基于支撑向量机算法的抗干扰混合波束成形系统

针对复杂电磁环境下毫米波阵列的空间辐射干扰抑制问题,设计了一种低成本的自适应波束成形系统。首先建立了复杂电磁环境下通信系统模型,建立目标函数。然后利用机器学习中支持向量机算法将原非凸约束问题转化为二阶锥优化问题,获得理想编码矢量。最后利用梯度追踪算法对理想波束矢量进行稀疏重构,完成抗干扰波束的低复杂度实现。仿真结果表明,提出的波束成形系统能够对干扰作出有效抑制,能提升通信质量。     

基于太阳能电池板的无线光通信与传能复合系统实验研究

为明确光载波无线传输系统中,复合传输相比单独传输的优越性,实验对比了单独传能、单独通信、复合传输三种结构在传输距离为0.1m、接收的光功率估值为3.5mW、光通信速率为1kbps时的输出特性.结果表明,单独传能系统在与电感串联的负载为4kΩ时,电池板输出最大功率为1.82mW,复合传输系统在与电感串联的负载为5kΩ时,电池板输出最大功率为2.1 mW,比单独传能系统高出15%;与电容串联的负载较低时复合传输系统输出信号波形发生畸变,优化负载后波形得以改善,相同条件下幅值比单独通信系统高出1.52V.     

基于VLC的室内无线视频语音通信系统的设计和实现

提出了一种基于可见光通信技术的新型室内无线视频语音通信系统。本文介绍了相关的系统架构,全双工的实现技术及TCP/IP的组网方案等,并对室内可见光通信中提高系统整体性能的若干关键技术进行了讨论。     

基于环磁美特材料的无线传能系统

传统的四线圈磁共振耦合无线传能系统已在移动电子设备、电动汽车无线充电中得以应用,然而,其传能效率仍然因其磁场空间分布的发散性而难以提高.为了克服上述缺点,我们提出了一种基于环磁美特材料、磁场更为局域的高效无线传能系统.该系统将四线圈系统中的一对磁谐振耦合线圈替换为具有环磁谐振特性的四个非对称开口谐振环.该环磁模式具有高Q值、低金属损耗以及辐射抑制的特性.实验结果表明,相对于四线圈系统,该系统的磁场更为集中,能量传输效率更高.     

基于物联网的设施温室监控系统中无线传感器节点设计

设计具有低成本、低功耗、易扩展的设施温室监控设备,深入研究无线网络构成,优化网络结构、降低组网难度、提高组网效率。采用 MSP430F149为核心的处理器;采用CC2530射频芯片实现无线传输;提供多种协议接口方便传感器的扩展,给出了土壤温湿度、空气温湿度、光照传感器的选型和指标参数;由本设计的无线传感器节点作为WSN中的全功能设备同时充当路由节点,搭建了MESH型的无线传感器网络结构。经测试,通过硬件设计及网络结构搭建,系统具有结构简单、组网快捷、数据传输可靠性高等优点,能较好的满足无线传感器节点在设施温室监控中的应用。     

基于双粒子方位角关联方法研究费米能区重离子碰撞中横向流的入射能量依赖关系

基于双粒子方位角关联(2pAC)方法开展了费米能区⁶⁴Zn轰击⁵⁸Ni靶的重离子碰撞中横向流入射能量依赖的实验研究。利用考虑了单个事件中参考粒子对剩余体系反冲修正的改进的2pAC方法和已有的2pAC方法分别抽取了26,35和47MeV/u能量下⁶⁴Zn+⁵⁸Ni半中心碰撞的相对横向流强度,发现横向流的强度随入射能量增加而减弱的趋势与抽取横向流过程中是否考虑反冲修正无关,但考虑反冲修正时得到的横向流相对强度对比未考虑反冲修正时显著减小。通过线性拟合得到的相对横向流强度-入射能量关系,进一步获得了⁶⁴Zn+⁵⁸Ni半中心碰撞的平衡能分别为(110.1±5.8) MeV/u(改进的2pAC方法)和(128.0±5.6) MeV/u(已有的2pAC方法)。对比以往基于常规反应平面重建方法抽取得到的结果发现,基于改进的2pAC方法得到的结果与以往基于常规方法测得的平衡能-碰撞参数关系符合很好;相反,基于已有2pAC方法得到的结果被显著高估。对比结果证明了在利用2pA...     

Integrated wireless communications and wireless power transfer: An overview

As an important application of the fifth generation (5G) mobile communication systems, Internet of Things (IoT) has attracted worldwide research interests. Since most of the communication devices in IoT are powered by batteries, these devices always have limited operation time. Wireless power transfer (WPT) technology, which can transfer power over a wireless medium (without any wires), can avoid the need to manually replace or recharge the batteries of the wireless devices in IoT. For electromagnetic (EM) radiation-based WPT, since radio-frequency (RF) signals that transport energy can at the same time be used for wireless communications, integrated wireless communications and WPT becomes a new research area which has attracted great research interests. In this paper, we first introduce two main research paradigms for integrated wireless communications and WPT, i.e., simultaneous wireless information and power transfer (SWIPT) and wireless-powered communication network (WPCN). Then we provide an overview of the state-of-the-art of both SWIPT and WPCN, respectively. Finally, we point out the new and challenging future research direction.     

基于Metglas/PFC磁电层状复合材料的电能无线传输系统

本文完整推导了无直流偏磁条件下, 磁致伸缩材料和压电材料黏接而得的磁电层状复合材料输出电压、电流、磁电系数表达式, 制备了多个样品并实现了电能无线传输系统. 对样品的测试结果验证了理论分析的正确性. 进一步试验结果表明: 磁电层状复合材料的输出具有倍频特性, 材料长度与谐振频率成反比, 谐振状态下样品可在20 Oe的磁场中输出接近100 V (有效值)开路电压, 样品最大传输功率为520 mW (此为该传输方式下公开报道的最大功率), 功率密度为1.21 W/cm³, 样品最大传输效率达35%, 30°以内的偏转角度对材料的输出无显著影响. 试验结果表明, 基于Metglas/PFC磁电层状复合材料是小体积、 小功率、 对传输效率不甚敏感的电能无线传输应用的一种非常有前景的实现方式. 关键词： 磁电复合材料 无线能量传输     

Relay selection and nonlinear energy harvesting in full-duplex multi-relay cooperative network

Energy harvesting (EH) is a promising technique to extend the lifetime energy-constrained devices in wireless networks. This paper analyses the significance of relay selection and non-linear EH in evaluating the performance of Full-duplex (FD) decode-and-forward (DF) multi-relay cooperative network. The relay selection is considered under three scenarios based on channel state information (CSI) availability. We compare the EH performance of a hybrid power-time-splitting (PTS)-based non-linear energy harvester with time-spitting (TS) and power-splitting (PS) EH at the relay node. We derive the expression of outage probability (OP) of FD DF multi-relay cooperative network over independent and identically distributed Rayleigh fading channels. Numerical results show that the outage performance of the system is significantly enhanced by deploying an ideal relay selection scheme. This paper also gives insights about the combined effect of saturation threshold of non-linear EH and residual self-interference (RSI) on the system performance. Unlike linear EH systems, the non-linear EH causes the outage floor even when the RSI is significantly small. The response of the system is also analysed for the impact of TS and PS ratios. Furthermore, we also investigate the system’s performance in terms of other system parameters like the number of relays and data transfer rate. Monte Carlo simulations are used to verify the analytical expressions.     

Efficient and stable wireless power transfer based on the non-Hermitian physics

As one of the most attractive non-radiative power transfer mechanisms without cables,efficient magnetic resonance wireless power transfer(WPT)in the near field has been extensively developed in recent years,and promoted a variety of practical applications,such as mobile phones,medical implant devices and electric vehicles.However,the physical mechanism behind some key limitations of the resonance WPT,such as frequency splitting and size-dependent efficiency,is not very clear under the widely used circuit model.Here,we review the recently developed efficient and stable resonance WPT based on non-Hermitian physics,which starts from a completely different avenue(utilizing loss and gain)to introduce novel functionalities to the resonance WPT.From the perspective of non-Hermitian photonics,the coherent and incoherent effects compete and coexist in the WPT system,and the weak stable of energy transfer mainly comes from the broken phase associated with the phase transition of parity-time symmetry.Based on this basic physical framework,some optimization schemes are proposed,including using nonlinear effect,using bound states in the continuum,or resorting to the system with high-order parity-time symmetry.Moreover,the combination of non-Hermitian physics and topological photonics in multi-coil system also provides a versatile platform for long-range robust WPT with topological protection.Therefore,the non-Hermitian physics can not only exactly predict the main results of current WPT systems,but also provide new ways to solve the difficulties of previous designs.     

悬臂梁压电振子宽带低频振动能量俘获的随机共振机理研究

研究了利用系统非线性来提高悬臂梁压电振子宽带低频振动能量俘获效率的随机共振机理,通过增加一对矩形永磁铁对传统线性悬臂梁压电振子结构进行了改进,结果揭示:在外部非线性磁力作用以及合适的磁铁间距条件下,这种外加磁力悬臂梁压电振子会构成一个双稳系统,在外部宽带低频随机振动源激励下发生随机共振现象,且发生随机共振时的输出电压明显增大,从而可以扩展悬臂梁压电振子的共振频率范围、提高低频振动能量的转化输出. 关键词： 压电悬臂粱 振动能量俘获 宽带低频 随机共振     

Hybrid device for acoustic noise reduction and energy harvesting based on a silicon micro-perforated panel structure

A kind of hybrid device for acoustic noise reduction and vibration energy harvesting based on the silicon micro- perforated panel （MPP） resonant structure is investigated in the article. The critical parts of the device include MPP and energy harvesting membranes. They are all fabricated by means of silicon micro-electro-mechanical systems （MEMS） tech- nology. The silicon MPP has dense and accurate micro-holes. This noise reduction structure has the advantages of wide band and higher absorption coefficients. The vibration energy harvesting part is formed by square piezoelectric membranes arranged in rows. ZnO material is used as it has a good compatibility with the fabrication process. The MPP, piezo- electric membranes, and metal bracket are assembled into a hybrid device with multifunctions. The device exhibits good performances of acoustic noise absorption and acoustic-electric conversion. Its maximum open circuit voltage achieves 69.41 mV.     

PVK:DBVP掺杂体系的能量转移及发光性质的研究

研究了不同比例的PVK与齐聚PPV衍生物DBVP掺杂体系的能量转移和发光特性.通过对PVK，DBVP及PVK: DBVP掺杂体系的UV-vis，PL和PLE光谱的研究，分析了PVK与DBVP之间的能量转移过程.利用PVK在体系中类似于溶剂的分散作用，制备了结构为ITO/PEDOT/PVK: DBVP/LiF/Al的电致发光器件，研究了掺杂体系的电致发光性能.结果表明，在掺杂体系的光致发光和电致发光中，PVK的发射被有效地抑制，PVK与DBVP之间发生了非常有效的能量转移，通过调节PVK与DBVP的比例，可以获得蓝色和绿色发光，同时可以改善器件的发光性能，当PVK与DBVP的重量比为1∶2时，器件的绿色发光效率达到1.06cd/A，此时发光亮度为52cd/m².     

PVK∶DBVP掺杂体系的能量转移及发光性质的研究

研究了不同比例的PVK与齐聚PPV衍生物DBVP掺杂体系的能量转移和发光特性.通过对PVK,DBVP及PVK:DBVP掺杂体系的UV-vis,PL和PLE光谱的研究,分析了PVK与DBVP之间的能量转移过程.利用PVK在体系中类似于溶剂的分散作用,制备了结构为ITO/PEDOT/PVK:DBVP/LiF/Al的电致发光器件,研究了掺杂体系的电致发光性能.结果表明,在掺杂体系的光致发光和电致发光中,PVK的发射被有效地抑制,PVK与DBVP之间发生了非常有效的能量转移,通过调节PVK与DBVP的比例,可以获得蓝色和绿色发光,同时可以改善器件的发光性能,当PVK与DBVP的重量比为1∶2时,器件的绿色发光效率达到1·06cd/A,此时发光亮度为52cd/m2.     

CdTe量子点与罗丹明B水溶液体系下的双光子激发荧光共振能量转移

采用时间分辨荧光光谱技术研究了在双光子激发下不同尺寸的量子点与罗丹明B 之间的荧光共振能量转移. 研究结果表明, 在800 nm的双光子激发条件下, 体系间能量转移效率随着供体吸收光谱与受体荧光光谱的光谱重叠程度增加而增加; 理论分析表明, 供体和受体间的Förster半径增加是导致其双光子能量转移效率增大的物理原因. 同时, 研究了罗丹明B浓度对荧光共振能量转移效率的影响. 研究结果表明, 量子点的荧光寿命随着罗丹明B浓度的增加而减小; 量子点与罗丹明B之间的荧光共振能量转移效率随着罗丹明B浓度的增加而增加; 当罗丹明B浓度为3.0×10^-5 mol·L^-1时, 双光子荧光共振能量转移效率为40.1%.     

A non‐enzymatic model based on an acyl transfer reaction for the formation of energy‐rich acetyl phosphate in organic solvents and in a biphasic system

The formation of acetyl phosphate (AcP), an energy‐rich phosphate compound, was studied through the reaction of 2,4‐dinitrophenyl acetate with H₂PO solubilized with Kryptofix® 222 or as a tetra‐n‐butylammonium ((n‐C₄H₉)₄N⁺) salt in organic media. The results indicated that the rate of the reaction in acetonitrile is strongly inhibited by the addition of water, suggesting that the water added to the medium preferentially solvates the H₂PO anion, inhibiting its action as a nucleophile and allowing it to act as a general base catalyst, which leads to the hydrolysis of the ester. The utilization of various organic solvents in the acetyl transfer process demonstrated that the specific interaction of the solvent with water accelerates the process, by desolvation of H₂PO, which can act as a nucleophile. Finally, a formation/transformation cycle of AcP was studied in a biphasic system (water/CH₂Cl₂) using Kryptofix® 222 and (n‐C₄H₉)₄N⁺BF as both the carrier and solubilizing agent for KH₂PO₄. Copyright © 2010 John Wiley & Sons, Ltd.