利用合成谱在计算全息图中编码多个物体的方法

 提出在迂回位相傅里叶变换计算全息图中利用合成谱记录多个物体的方法。该方法利用多个物体合成的傅里叶频谱,代替传统的迂回位相型计算全息图中的单一频谱,在一幅计算全息图中完成多个物体的编码。再现时多个物体同时再现在同一衍射级的周围,并且再现像的形式可以多种多样。采用液晶空间光调制器(LC SLM)完成计算全息图的光学再现,实验验证了方法的有效性。结果表明：该方法可有效提高计算全息图的信息容量。     

基于Matlab的计算全息图的制作与数字再现的研究

 应用Matlab语言,结合博奇型计算全息的编码方法,利用计算机分别绘制了菲涅耳全息图和傅里叶变换全息图,实现了计算全息图的快速制作,讨论了制作计算全息图的原理、方法和步骤。利用CGH技术和数字全息技术所生成的全息图再现出原始图像,完成了全息图的数字重现,实现了整个全息记录和再现过程的计算机模拟。与传统的编程语言和绘图方法相比较,该算法在实现上更加简单和快捷,并且带有一系列提高计算全息图质量的措施,有效地消除了零级像和孪生像的影响,获得了清晰的数字再现图像。     

黄氏傅里叶计算全息图的数字再现及零级像的消除

将数字再现技术应用于黄氏(T.S. Huang)傅里叶计算全息图的再现过程, 制作计算全息图,利用数字再现直接在计算机上完成全息图的再现.直接利用数字图像处理的方法对所得计算全息图进行滤波处理,消除了零级像和原始像,使得数字再现时得到了清晰的再现像,并给出了所制作的计算全息图以及数字再现的结果.     

彩色全息图的计算机产生和数字再现

提出了一种基于色彩合成以及菲涅尔衍射原理,用计算机产生全息图并用数字方法再现彩色全息图的方法。该方法的第一步是将物体的彩色RGB图像分离为三基色强度图,再利用博奇编码的方法制成修正离轴参考光分色计算机全息图;第二步是分别对分色全息图在频域进行调制以实现用原参考光真实再现原始物光波。通过滤波消除零级衍射及共轭像的影响,获得了所需要的实像并提高了像质。提供的实验是选用一幅RGB图像作为原始物体,给出了用博奇编码法制成的全息图以及最后经色彩合成获得的再现像。结果表明,该方法能使各分色全息图的再现像准确重合,解决了在色彩合成时容易出现的色串扰问题。     

一种新的纯位相型计算全息图及其应用

本文提出了一种新的制作纯位相型计算全息图的两孔编码方法并用实验加以证实.用本编码法制作的纯位相型计算全息图的特点是:(1)可记录、复现任意的复函数光场;(2)光场在全息图的光轴上再现,空间带宽积大,衍射效率高.     

基于数字闪耀光栅的位相全息图光电再现优化

针对利用液晶空间光调制器（LC-SLM）进行全息图光电再现过程中,再现像面存在多级衍射像造成单一像能量利用率低的问题,提出了一种在位相全息图中加载数字闪耀光栅的方法,以提高全息图光电再现中单一衍射像的衍射效率.分析了闪耀光栅作为衍射光学元件的特性及其对光波进行位相调制的原理,并阐述了在LC-SLM中加载数字闪耀光栅对位相全息图光电再现时像面能量分布的影响.搭建了基于LC-SLM的位相全息图光电再现实验系统.理论分析表明：在其他条件不变的情况下,加载竖直（或水平）槽向周期为2 pixels的数字闪耀光栅可使 关键词： 全息光电再现 位相全息图 数字闪耀光栅 液晶空间光调制器     

二步法大景深反射全息图

以开拓反射全息图的景深表达能力为目的,从反射全息图的共轭物像关系出发,利用反射全息图的均匀介质耦合波理论和布拉格条件,对其白光再现像模糊作了具体的分析和讨论,得到色模糊和线模糊的表达式.指出反射全息图上不同各点对任意白光再现像点的色模糊和线迷糊的影响均存在差异,给出反射全息图白光再现像的景深表达式.实验利用二步法制作了一张景深为83 cm的反射全息图,与大景深彩虹全息图再现像相比,其再现像的立体感更加强烈.理论分析和实验结果表明,光源的再现角度和观察距离对反射全息图的再现像景深大小影响显著.在再现光垂直于反射全息图平面照明情况下,反射全息图具有最好的景深表达能力.     

计算全息显示技术的研究

基于电寻址液晶光阀实验系统,利用计算像面全息法制作全息图并实现像的再现.综合比较物点散射法、层析法和主菲涅耳波带法3种计算全息方法的优劣,选择物点散射法以四级迂回相位编码的方式,得到三维物体的计算全息图.通过烟雾散射的丁达尔效应观察圆柱体的全息像,采用空心立方体优化成像的清晰度和对比度.     

一种新的三维计算全息图的计算方法

介绍了一种制作真实三维物体计算全息图的新方法。用摄像机记录三维物体在非相干光照明条件下两个正交方向上不同视角的一系列投影像，将这些投影像导入计算机，在MATLAB中对其作快速傅里叶变换。对这一系列二维投影像的傅里叶变换图进行抽样，得到三维物体在透镜后焦平面上的光场分布，进而制成一张计算全息图。结果证明该方法可以实现对真实物体三维全息图的合成，并且在算法实现上更加简单，提高了程序的运行速度，有利于改善全息图再现像的质量。为解决真实物体相干全息记录中光源功率和相干长度对全息记录可行性的限制指出了一个新的方向。     

二值干涉型计算全息图

本文研究二值干涉型计算全息图,这种全息图最适于综合位相型波前,因此本文的讨论也只限于位相型波前的情况,对物光和参考光的选择以及全息图的抽样进行了分析,并得出相应的结论。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.     

Fiber Modal Index Measurements Based on Fiber Gratings

A novel method based on fiber gratings for measuring the effective indices of fiber modes is proposed. The effective index difference between the core mode and a cladding mode was obtained by analyzing the interference fringe of a pair of cascaded long-period fiber gratings. In order to extract the core mode index from the measured index difference, an index matching oil immersion method is proposed. By analyzing the interaction between the cladding mode and the oil applied on the cladding surface, the mode order and the effective index of the involved cladding mode might be calculated. Experimental results about the interference fringe shifts induced by the oil index and the oil-applied length are also presented.     

Optical Pulse Compression Schemes That Use Nonlinear Bragg Gratings

Nonlinear optical pulse compression of picosecond pulses typically requires long lengths of optical fiber and multiple components. Periodic structures, such as fiber Bragg gratings, are highly dispersive at wavelengths outside of the photonic bandgap. This implies that such gratings can be used as very short all-fiber compressors. In this paper a number of such compression schemes are reviewed involving uniform and nonuniform fiber Bragg gratings, relying on both soliton and nonsoliton compression principles. Experimental results supporting the corresponding underlying theory are also presented. Finally, an extension of one of the compression schemes is shown, which allows the generation of adjustable high-repetition rate soliton trains.