SYNTHESIS AND CHARACTERIZATION OF THERMOTROPIC COPOLYESTERS AND COPOLY (ESTER-AMIDE)S CONTAINING OXYETHYLENE-ETHER AS THE SPACER

Flexible oxyethylene-ether was introduced into the aromatic copolyesters and copoly(es-ter-amide)s to reduce the melting point of resulting polymers. The melting point was greatlyreduced to 200℃ or even lower in some cases, and the molecular weight was satisfactorilyhigh as reflected by inherent viscosity. The polymers exhibited high thermal stability and goodmechanical properties as determined by TGA and mechanical tests. The copolyester showedbetter crystallinity and liquid crystallinity than corresponding copoly(ester-amide)s with simi-lar monomer composition as reflected by POM observation and WAXD study. The meltingpoints for both copolyesters and copoly (ester-amide)s showed great dependence on the p-acetoxybenzoic acid (PAB) content in monomer composition and reached the lowest valuewhen PAB was 29 mol%.     

TRANSESTERIFICATION OF POLY(ETHYLENE TEREPHTHALATE) WITH POLY(ε-CAPROLACTONE)*

Transesterification of poly(ethylene terephthalate) (PET) with poly(ε-caprolactone) (PCL) was investigated bymeans of NMR spectroscopy, extraction experiments, differential scanning calorimetry (DSC) and phase contrast microscopy(PCM). The ~1H-NMR results show that transesterification takes place in the melt blends and leads to the formation of thePET-PCL copolyester with a chemical structure similar to ethylene terephthalate-ε-caprolactonc copolycster (TCL)synthesized directly from monomers. However, even in the blend that has been transesterified for 8 h, the random PET-PCLcopolyester, PET-PCL copolyester with long PET or long PCL segments and the unreacted PET and PCL homopolymersmay coexist. Due to the low mobility of PET and PCL chains and the high viscosity of the two macromolecules, thetransesterification proceeds with difficulty. Furthermore, PET is incompatible with PCL, the transesterification can onlyoccur at the interface or in the interfacial region between two phases, and finally the reaction can only reach a localequilibrium. These results indicate that in fact the transesterification in the melt blend between two incompatiblehomopolymers could not lead to the formation of completely random or typical block copolyesters.     

LARGELY IMPROVED TENSILE PROPERTIES OF POLY（ETHYLENE TEREPHTHALATE） BY USING GLYCERIN

In order to improve the tensile properties of poly（ethylene terephthalate）（PET）, we used the direct esterification method to synthesize PET in a home-made facility, and a certain amount of ethylene glycol （EG）, one of the two starting monomers, was substituted by glycerin （GE）. Four PETs with different GE contents were prepared to investigate the effect of GE on the crystallization and tensile properties of the prepared copolyester. The results showed largely improved tensile properties and increased crystallization temperature due to the possible crosslinking structure in PET by using a small amount of GE.     

Role of the Confined Geometry on the Crystallization of Poly（ethylene terephthlate） Ultrathin Films

The reflection-absorption infrared (RAIR) was employed to study the crystallization kinetic of poly (ethylene terephthalate) (PET) ultrathin films. During isothermal crystallization the thinner PET film shows a slower kinetic compared with the thicker film. Moreover, the final crystallinity of films with various thickness was found decrease with thickness. The result of fitting our data to Avrami equation showed that the Avrami exponents decrease with film thickness.     

PROPERTIES AND MICROSTRUCTURE OF AROMATIC LIQUID CRYSTALLINE COPOLYESTERS

The properties and structures of thermotropical liquid crystalline copolyesters basedon p-hydroxybenzoic acid (PHBA), terephthalic acid (TPA) and bisphenol A (BPA) werestudied by DSC, WAXD, hot stage polarized microscopy and NMR. It was found that mostof the copolyesters were soluble in many common organic solvents. The copolyesters hadfow T_m/T_f values and a broad range of liquid crystal phase, making the polymers readilymelt-processable. The effects of annealing at different temperatures on the copolyestercontaining 33% PHBA were also discussed. It was noted that annealing at ca. 200℃(below Tc - n) could lead to the increasing of the crystallinity of the copolyester while themicrostructure and sequence structure had not changed. Annealing at ca.280℃ (nearTc - n) could bring a change of crystal and sequence structure and simultaneously madethe ndcrodomains be ordered more perfectly.     

Non-Isothermal Crystallization Kinetics of PET Under Solid State Poly condensation

An equation of non-isothermal crystallization kinetics was derived according to a new model and the crystallizations of both the PET samples under solid state polycon-densation and the pre-orientation yarn of high speeding spinning PET were studied with this equation. The results show that there is a good linear relationship between In {-In[1-X(T)]} and lnΦ. The index m in the equation approximately equals to 3 for PET chips and 1. 3 for pre-orientated yarn. At the same temperature, Q(T) decreases with the increase of PET M. W. and the kinetics parameters obtained by Jeziorny' s method indicate that G also decreases with the increase of PET M. W.. Q(T) and Gc show the same varying tendency in the non-isothermal crystallization process.     

KINETICS OF NON-ISOTHERMAL CRYSTALLIZATION OF POLY (ETHYLENE TEREPHTHALATE) MODIFIED BY POLY (ETHYLENE GLYCOL)

The non-isothermal crystallization kinetics of poly(ethylene terephthalate) (PET) modified by poly (ethlene glycol) (PEG) were determined by DSC. The dual linear regression method was used to evaluate the relationship between the reciprocal of t 1/2 ( the half life of crystallization) and the appropriate temperature variable. The parameters such as the activation energy (Ed) for transport, the equilibrium melting temperature (T_m~0),the nucleation parameter (ψ),themaximum crystallization temperature (T_(e, max)), and the kinetic crystallizability (G) for the copolyesters were obtained. The influence of the PEG content in PET chains on the parameters characterizing crystallization kinetics and crystallization thermodynamics was discussed.     

TRANSESTERIFICATION OF POLY（BISPHENOL A CARBONATE） WITH AROMATIC AND ALIPHATIC SEGMENTS IN BUTYLENE TEREPHTHALATE-CAPROLACTONE COPOLYESTER

In this article, the transesterification of poly(bisphenol A carbonate) (PC) with butylene terephthalate-caprolactone copolyester at a weight ratio 50/50 (BCL(21)) was thoroughly investigated by proton nuclear magnetic resonance spectroscopy (^1H-NMR), in conjunction with a model compound. The ^1H-NMR results of the annealed blend PC/BCL(21) show that the formation of bisphenol A-terephthalate ester units is the same as in the annealed blend of PC with PBT, and the transesterification actually occurs between PC and butylene terephthalate (BT) segments in BCL(21). By comparison with the model compound bisphenol A dibutyrate, the new signal appearing at δ=2.56 in the ^1H-NMR spectrum confirms the existence of bisphenol A caprolactone ester units resulting from the exchange reaction of PC with caprolactone (CL) segments. ^1H-NMR analysis of the transesterification rates reveals that the reaction of PC with aromatic and aliphatic segments in BCL(21) proceeds in a random manner. The miscibility of the blend PC/BCL(21) copolyester is favorable for the transesterification of PC with BT segments and CL segments.     

RELATION BETWEEN DYNAMIC LOSS MODULUS AND DIFFUSION COEFFICIENT IN A MODIFIED PET FIBER*

The mobility of polymer chain segments is shown to play a major role in the diffusion ofdisperse dyes in a copolymerization modified PET system, monoepoxy compoundCH_3 (CH_3),OCH_2CH--CH_2 modified PET. The rate of dye diffusion (diffusion coefficient D) hasbeen related to the time-dependent mechanical property, dynamic loss modulus E", which iscontrolled by the mobility of chain segments. In this modified copolyester system, the variance ofamount of modifier in the copolyester fibers causes the change in disperse dye diffusion coefficientto fiber, and in the dynamic loss modulus of the fibers, but the relationship between the diffusionand the dynamic loss modulus is in agreement with the theoretical relation derived by Bell andDumbleton. The relation obtained in this paper is:Ln D=-2. 28Ln E"+26. 81     

CRYSTALLIZATION AND MULTI-MELTING BEHAVIOR OF POLY (ETHYLENE TEREPHTHALATE) MODIFIED BY SODIUM SALT OF 5-SULPHO-ISOPHTHALIC ACID

The crystallization kinetics of the copolyester, poly(ethylene terephthalate) (PET) modified by sodium salt of 5-sulpho-isophthalic acid(SIPM), was investigated by means of differential scanning calorimeter. The experimental results and polari-microscopy observation all showed that the introduction of SIPM did not affect the nucleation of crystallization. Within the temperature range between their glass transition temperature T_θand melting point T_m, the crystallization rate of the copolyester sample decreased with increasing content of SIPM. The relative crystallization rate constant Z of SIPM/DMT (dimethyl terephthalate) 4mol % sample was about 1% pure PET's Z value. For isothermal crystallized copolyester samples, DSC heating curves displayed multi-melting behavior. This was interpreted by molecular weight fractionation during crystallization and premelting-recrystallization mechanism. This interpretation showed why the second melting point T_(m2) will change according to Hoffman-Weeks(H-W) equation and the first melting point T_(m1) will increase with increasing SIPM. The principal cause of these phenomena is the high temperature crystallization rate decreases rapidly with increasing SIPM.     

PET类共聚酯的玻璃化转变

用DSC,IR和DLI(解偏振光法)等方法研究了聚(对苯二甲酸/间苯二甲酸)乙二醇酯[P(ET/EI)]和聚对苯二甲酸(乙二醇/丁二醇)酯[P(ET/BT)]系列共聚酯的玻璃化转变.结果表明,共聚酯的玻璃化转变是玻璃态有序结构解序后的一种转变.随ET链段含量的减少,两系列共聚酯的玻璃化转变在DSC中均表现出由拐折渐变为峰形,这是由于需要维持构象转变的ET链段在数量上的减少所致.玻璃态共聚酯的有序结构与分子链末端的游离羟基有关,游离羟基与羰基形成氢键是PET及可结晶共聚酯在结晶时必须经历的一个过程,而不能结晶的共聚酯(IPA30)则因该氢键的形成导致其玻璃化转变的消失.     

非晶聚对苯二甲酸乙二酯的制备与表征

通过单体酯交换法和聚 2 ,6 萘二甲酸乙二酯 (PEN)与低分子量PET酯交换的方法分别合成了一系列NPA/TPA/EG和IPA/TPA/EG共聚酯 .随着NPA或IPA单元含量的增加 ,等温结晶速度迅速降低 ,共聚物的结晶性降低甚至非晶化 .由NMR分析得知单体酯交换法与聚合物酯交换法得到的共聚酯NPA/TPA/EG序列分布相近 ,链结构都接近完全无规 .由DSC结果分析 ,随共聚单体含量的增加 ,熔点和熔融热降低 ,结晶度也随之降低 .当NPA或IPA含量达到 2 0 %时 ,可以得到非晶的共聚酯 (APET) .本文还对共聚物组成与结晶温度的关系进行了表征     

Effects of comonomer sequential structure on thermal and crystallization behaviors of biodegradable poly(butylene succinate‐co‐butylene terephthalate)s

In this work, new investigations on the effect of comonomer sequential structure on the thermal and crystallization behaviors and biodegradability have been implemented for the biodegradable poly(butylene succinate‐co‐butylene terephthalate) (PBST) as well as aliphatic poly(butylene succinate) (PBS). At first, these copolyesters were efficiently synthesized from dimethyl succinate and/or dimethyl terephthalate and 1,4‐butanediol via condensation polymerization in bulk. Subsequently, their molecular weights and macromolecular chain structures were analyzed by gel permeation chromatography (GPC) and nuclear magnetic resonance (NMR) spectroscopy. By means of differential scanning calorimeter (DSC) and wide‐angle X‐ray diffractometer (WAXD), thermal and crystallization behaviors of these synthesized aromatic–aliphatic copolyesters were further explored. It was demonstrated that the synthesized copolyesters were revealed to have random comonomer sequential structures with thermal and crystallization properties strongly depending on their comonomer molar compositions, and that crystal lattice structures of the new crystallizable copolyesters shifted from the monoclinic crystal of semicrystalline PBS to triclinic lattice of the poly(butylene terephthalate) (PBT) with increasing the terephthalate comonomer composition, and the minor comonomer components were suggested to be trapped in the crystallizable component domains as defects. In addition, the enzymatic degradability was also characterized for the copolyesters film samples. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1635–1644, 2006     

新型成纤共聚酯

介绍了成纤共聚酯的研究工作主要是对聚对苯二甲酸乙二醇酯的研究、首先阐述了共聚单体的化学结构对共聚酯性能的影响。实验结果指出了经曲有限元 含有间）邻）位苯环结构和含柔性链结构的共聚是具有明显不同的物理例如,后者的玻璃化温度下降比前者大的多,前者的结昌速度减慢,而后乾的结晶速度加快。其次是阐述了共聚酯的物理性能对其纤维性能的影响,例如,玻璃化温度的降低有利于纤维染色性能的提高,含有柔性 的共聚酯玻璃化     

Thermal properties of random copolyesters of PET and 3- and 3,5-bromo-substituted p-hydroxybenzoic acids. II

Melt-polycondensation of poly(ethylene terephthalate) (PET) and 3-bromo-p-acetoxybenzoic acid or 3,5-dibromo-p-acetoxybenzoic acid in different mole ratios yielded random copolyesters. The copolyesters have higher T_gs than PET because of an increase in mol % of the substituted p-oxy-benzoate units and follow Wood's equation for copolymer T_gs. Using this equation, we calculated the T_gs of the homopolymers of 3-bromo-p-oxybenzoate and 3,5-dibromo-p-oxybenzoate, which are not available experimentally, to be 113 and 123°C, respectively. Up to certain percentages of the comonomer composition the copolyesters exhibited cold crystallization and melt transitions which we attribute to the crystallizable segments of PET. The variation in melting temperatures in the composition of the copolymer was explained by Flory's theory. The differences in the melting behavior of the polymer, annealed at various crystallization temperatures for a constant time interval, throws light on the morphological changes that took place in it. Using the Hoffman and Weeks method, we determined the extrapolated equilibrium melting temperatures of these copolyester which were used to calculate the enthalpy of melting for the crystallizable units.     

Morphology of poly(butylene terephthalate)–poly(ethylene terephthalate‐co‐isophthalate‐co‐sebacate) segmented copolyesters

Segmented copolyesters, namely, poly(butylene terephthalate)–poly(ethylene terephthalate‐co‐isophthalate‐co‐sebacate) (PBT‐PETIS), were synthesized with the melting transesterification processing in vacuo condition involving bulk polyester produced on a large scale (PBT) and ternary amorphous random copolyester (PETIS). Investigations on the morphology of segmented copolyesters were undertaken. The two‐phase morphology model was confirmed by transmission electron microscopy and dynamic mechanical thermal analysis. One of the phases was composed of crystallizable PBT, and the other was a homogeneous mixture of PETIS and noncrystallizable PBT. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2257–2263, 2003     

Novel copolyesters containing naphthalene structure. II. Copolyesters prepared from 2,6-dimethyl naphthalate, 1,4-dimethyl terephthalate,and ethylene glycol

Copolyesters containing rigid segments (naphthalene and terephthalene) and flexible seg-ments (aliphatic diol) structure were synthesized from DMN/DMT/EG (2,6-dimethyl naphthalate/1,4-dimethyl terephthalate/ethylene glycol) ternary monomers with various mole ratios. Copolyesters having intrinsic viscosities of 0.52–0.65 dL/g were obtained by melt polycondensation in the presence of metallic catalysts. The effect of reaction tem-perature and time on the formation of the copolyesters was investigated to obtain an op-timum condition for copolyester manufacturing. The optimum condition for PNT (poly-ethylene naphthalate terephthalate) copolyester manufacturing is the transesterification under nitrogen atmosphere for 4 h at a temperature of 185±2°C followed by polymerization under 2 mm Hg for 2 h at a temperature of 280°C. Most copolyesters have better solubilities than poly(ethylene naphthalate) (PEN) and poly(ethylene terephthalate) (PET) in various solvents. The effect of the starting mole ratio of DMN, DMT, and EG on the thermal properties of the resulted copolyesters was also investigated using differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). Glass transition temperatures of copolyesters were in the range of 70.7–115.2°C, and 10% weight loss in nitrogen were all above 426°C. © 1995 John Wiley & Sons, Inc.     

Sequentially ordered,thermotropic aromatic copolyesters: Synthesis and comparison of their properties with random copolyesters

Synthetic methods of aromatic copolyesters having ordered comonomer sequence are described. In order to obtain a regular sequence copolyester, one first has to prepare a dimeric or trimeric compound with a predesigned sequence via a multistep route and then polycondense it with another difunctional compound. Low reaction temperature is required to avoid the occurrence of undesired interchange reactions that would lead to randomization of the comonomer sequence. Sequentially ordered copolyesters exhibit significant differences in thermal transitions, crystalline properties, and occasionally even in liquid crystallinity when compared with the properties of the corresponding random copolyesters. According to the preliminary results randomization in comonomer sequence of sequentially regular aromatic copolyesters above their melting points is rather rapid.     

生物可降解聚丁二酸/甲基丁二酸丁二酯系列共聚物的合成和表征

摘要合成了一系列聚丁二酸/甲基丁二酸丁二醇共聚酯(PBSM), 利用DSC, ¹H NMR和X射线衍射等方法对共聚物组成、 热学性能、 结晶性能、 等温结晶行为进行了研究. 结果表明, 引入甲基丁二酸共聚单元较为显著地改变了聚丁二酸丁二酯(PBS)的热学性能, 利用Hoffman\|Weeks方程得到的共聚物平衡熔点随共聚物的组分含量增加而降低, 玻璃化转变温度亦有所降低, 熔点则符合无规共聚物的Flory方程. 此外, 利用Avrami方程分别研究了均聚物PBS及共聚物PBSM-20的等温结晶行为, 结果表明, 在所研究的温度范围内, 聚酯结晶速率随温度升高而降低, PBS和PBSM\-20的Avrami指数分别介于2.8~3.0和2.7~3.0之间, 结晶方式为三维生长异相成核, 而X射线衍射测试结果表明晶体结构几乎不变.