Doping gamma-Fe(2)O(3) nanoparticles with Mn(III) suppresses the transition to the alpha-Fe(2)O(3) structure

Here we report on a mixed oxide system, gamma-Fe2O3 nanoparticles doped with Mn(III), where the transition from the cubic to the more stable hexagonal alpha-Fe2O3 structure is suppressed. When amorphous Fe2O3 is heated at 300 degrees C for 3 h, ferrimagnetic gamma-Fe2O3 is observed as the sole product. On the other hand, when the temperature is raised to 500 degrees C, one observes only antiferromagnetic alpha-Fe2O3 as the product. However, upon doping with 8.5 wt % Mn(III), the amorphous nanoparticles crystallized to mainly the gamma-Fe2O3 matrix after heating at 500 degrees C for 3 h, and need to be heated to >650 degrees C for the complete transition to the alpha-Fe2O3 structure to take place.     

Control of the morphology of linear and cyclic PS-b-PI block copolymer micelles via PS addition

We have studied the effect of polystyrene (PS) homopolymer addition on the morphology of self-assembled block copolymer micelles made from linear or cyclic poly(styrene-b-isoprene), PS-b-PI, in a selective solvent for the PI block (heptane). Both copolymers have the same composition: the degree of polymerization is 290 for the PS block, and 110 for the PI block, and we focused on the influence of the addition of small amounts of PS homopolymer on the micellar morphology. For the copolymer concentrations considered, the linear copolymer self-organizes into spherical micelles while the cyclic copolymer forms cylindrical micelles. PS and PI chains constitute the core and the corona of these micelles, respectively, due to the different affinity of the blocks for heptane. Consequently, the PS homopolymer added is "solubilized" into the micellar core. Dynamic light scattering (DLS) data combined with atomic force microscopy (AFM) results show that the addition of PS homopolymer induces a drastic change in the micellar organization. Indeed, a morphological transition, from spheres to cylinders for the linear copolymer, and from cylinders to vesicles for the cyclic copolymer, is observed. These results highlight the fact that a small incorporation of PS homopolymer is clearly sufficient to modify the morphology (size and shape) of the micelles. This approach could be a key parameter for the design/control of micelles for specific applications in nanotechnology.     

Synthesis of iron oxide nanoparticles in a polyimide matrix

A monolayer of gamma-Fe(2)O(3) nanoparticles embedded in a polyimide (PI) matrix was fabricated by oxidizing an Fe metal film between two PI precursor layers. There was a critical Fe thickness ( approximately 7 nm) above which a continuous layer of gamma-Fe(2)O(3) film was formed in the PI film. Below the critical Fe thickness, the oxide film broke up into fine particles whose size was approximately 8 nm with narrow size distribution. It was further shown that these nanoparticles could have metallic cores, surrounded by an oxide layer. This method offers a unique way of covering a large surface area with fine magnetic oxide nanoparticles for potential application in high-density data-storage media.     

Synthesis and characterization of poly(divinylbenzene)-coated magnetic iron oxide nanoparticles as precursor for the formation of air-stable carbon-coated iron crystalline nanoparticles

Maghemite (gamma-Fe2O3) nanoparticles of 15 +/- 3 nm diameter were prepared by nucleation of gelatin/iron oxide followed by growth of gamma-Fe2O3 films onto these nuclei. The gamma-Fe2O3 nanoparticles were coated with polydivinylbenzene (PDVB) by emulsion polymerization of divinylbenzene (DVB) in an aqueous continuous phase containing the gamma-Fe2O3 nanoparticles. The PDVB-coated gamma-Fe2O3 nanoparticles, dispersed in water, were separated from homo-PDVB nanoparticles using the high gradient magnetic field (HGMF) technique. The influence of DVB concentration on the amount of PDVB coating, on the size and size distribution of the coated gamma-Fe2O3 nanoparticles and on their magnetic properties, has been investigated. Air-stable carbon-coated iron (alpha-Fe/C) crystalline nanoparticles of 41 +/- 12 nm diameter have been prepared by annealing the PDVB-coated gamma-Fe2O3 nanoparticles at 1050 degrees C in an inert atmosphere. These nanoparticles exhibit high saturation magnetization value (83 emu g(-1)) and excellent resistance to oxidation. Characterization of the PDVB-coated gamma-Fe2O3 and of the alpha-Fe/C nanoparticles has been accomplished by TEM, HRTEM, DLS, FTIR, XRD, thermal analysis, zeta-potential, and magnetic measurements.     

Synthesis of ordered mesoporous Fe3O4 and gamma-Fe2O3 with crystalline walls using post-template reduction/oxidation

Ordered mesoporous Fe(3)O(4) with crystalline walls (inverse spinel structure) has been synthesized for the first time, representing to the best of our knowledge, the first synthesis of a reduced mesoporous iron oxide. Synthesis was achieved by reducing ordered mesoporous alpha-Fe(2)O(3) (corundum structure) to Fe(3)O(4) spinel then to gamma-Fe(2)O(3) by oxidation, while preserving the ordered mesostructure and crystalline walls throughout. Such solid/solid transformations demonstrate the stability of the mesostructure to structural phase transitions from the hexagonal close packed oxide subarray of alpha-Fe(2)O(3) (corundum structure) to the cubic close packed subarray of Fe(3)O(4) spinel and gamma-Fe(2)O(3). Preliminary magnetic measurements reveal that the spins in both Fe(3)O(4) and gamma-Fe(2)O(3) are frozen at 295 K, despite the wall thickness (7 nm) being less than the lower limit for such freezing in corresponding nanoparticles (>8 nm).     

Multicomponent nanoparticles via self-assembly with cross-linked block copolymer surfactants

We describe a simple and versatile protocol to prepare water-soluble multifunctional nanostructures by encapsulation of different nanoparticles in shell cross-linked, block copolymer micelles. This method permits simultaneous incorporation of different nanoparticle properties within a nanoscale micellar container. We have demonstrated the co-encapsulation of magnetic (gamma-Fe2O3 and Fe3O4), semiconductor (CdSe/ZnS), and metal (Au) nanoparticles in different combinations to form multicomponent micelles that retain the precursor particles' distinct properties. Because these multifunctional hybrid nanostructures spontaneously assemble from solution by simultaneous desolvation of nanoparticles and amphiphilic block copolymer components, we anticipate that this can be used as a general protocol for preparing multifunctional nanostructures without explicit multimaterial synthesis or surface functionalization of nanoparticles.     

Fe3O4 and gamma-Fe2O3 nanoparticles for the adsorption of Co2+ from aqueous solution

The adsorption of Co2+ ions from nitrate solutions using iron oxide nanoparticles of magnetite (Fe3O4) and maghemite (gamma-Fe2O3) has been studied. The adsorption of Co2+ ions on the surface of the particles was investigated under different conditions of oxide content, contact time, solution pH, and initial Co2+ ion concentration. It has been found that the equilibrium can be attained in less than 5 min. The maximum loading capacity of Fe3O4 and gamma-Fe2O3 nanoparticles is 5.8 x 10(-5) and 3.7 x 10(-5) mol m(-2), respectively, which are much higher than the previously studied, iron oxides and conventional ion exchange resins. Co2+ ions were also recovered by dilute nitric acid from the loaded gamma-Fe2O3 and Fe3O4 with an efficiency of 86 and 30%, respectively. That has been explained by the different mechanisms by including both the surface and structural loadings of Co2+ ions. The surface adsorption of Co2+ on Fe3O4 and gamma-Fe2O3 nanoparticles has been found to have the same mechanism of ion exchange reaction between Co2+ in the solution and proton bonded on the particle surface. The conditional equilibrium constants of surface adsorption of Co2+ on Fe3O4 and gamma-Fe2O3 nanoparticles have been determined to be log K=-3.3+/-0.3 and -3.1+/-0.2, respectively. The structural loading of Co2+ ions into Fe3O4 lattice has been found to be the ion exchange reaction between Co2+ and Fe2+ while that into gamma-Fe2O3 lattice to fill its vacancy. The effect of temperature on the adsorption of Co2+ was also investigated, and the value of enthalpy change was determined to be 19 kJ mol(-1).     

Synthesis of highly crystalline and monodisperse maghemite nanocrystallites without a size-selection process.

The synthesis of highly crystalline and monodisperse gamma-Fe(2)O(3) nanocrystallites is reported. High-temperature (300 degrees C) aging of iron-oleic acid metal complex, which was prepared by the thermal decomposition of iron pentacarbonyl in the presence of oleic acid at 100 degrees C, was found to generate monodisperse iron nanoparticles. The resulting iron nanoparticles were transformed to monodisperse gamma-Fe(2)O(3) nanocrystallites by controlled oxidation by using trimethylamine oxide as a mild oxidant. Particle size can be varied from 4 to 16 nm by controlling the experimental parameters. Transmission electron microscopic images of the particles showed 2-dimensional and 3-dimensional assembly of particles, demonstrating the uniformity of these nanoparticles. Electron diffraction, X-ray diffraction, and high-resolution transmission electron microscopic (TEM) images of the nanoparticles showed the highly crystalline nature of the gamma-Fe(2)O(3) structures. Monodisperse gamma-Fe(2)O(3) nanocrystallites with a particle size of 13 nm also can be generated from the direct oxidation of iron pentacarbonyl in the presence of oleic acid with trimethylamine oxide as an oxidant.     

Novel Supports for Ethylene Polymerisation Based on Polystyrene Polymers

The industrial use of metallocene/methylaluminoxane catalytic systems and late transition metal catalysts requires the use of supports to directly get polyethylene (PE) with spherical morphology. The presence of residues of the inorganic support gives rise to PE contamination problems, therefore less contaminating organic supports may present an interesting alternative. In this work, linear hydroxypolystyrene (PS-OH) and polystyrene-block-isoprene copolymer (PS-b-PI) were tested as supports for ethylene polymerisation. The ability of these polymers when dissolved in a selective solvent to form micelles or aggregates, was investigated by light scattering techniques. Next, their capacity to act as MAO or TMA-activated supports towards MeDIP(2,6-iPrPh₂FeCl₂) catalyst was analysed by carrying ethylene polymerisation tests and PE morphology studies. The PS-b-PI copolymer, used as organic support in heptane, enabled the obtention of PE with well defined spherical morphology.     

Phase behavior of nanoparticles in a thermotropic liquid crystal

In this work, we describe the outstanding behavior of a nanocomposite system composed of the thermotropic liquid crystal 5CB doped with nanoparticles of the magnetic iron oxide maghemite (gamma-Fe(2)O(3)). We show that the I-N transition is associated with a reversible gathering of nanoparticles inside droplets of the ferronematic phase coexisting with a nonmagnetic nematic host phase.     

Effect of interacting nanoparticles on the ordered morphology of block copolymer/nanoparticle mixtures

We investigated the effect of hard additives, that is, magnetic nanoparticles (NPs) and metal NPs, on the ordered morphology of block copolymers by varying the NP concentration. To characterize the structural changes of a block copolymer associated with different NP loadings, small-angle X-ray scattering and transmission electron microscopy were performed. Monodisperse maghemite (γ-Fe₂O₃) NPs (7 nm in diameter) and silver (Ag) NPs (6 nm in diameter) with surfaces modified with oleic acids were synthesized, and a cylinder-forming poly(styrene-block-isoprene) diblock copolymer was used as a structure-directing matrix for the NPs. As the NP concentration increased, domains of NP aggregates were observed for both magnetic and metal NPs. In the case of mixtures of cylinder-forming poly(styrene-block-isoprene) and Ag NPs with weak particle–particle interactions, random aggregates of Ag NPs were observed, and the ordered morphology of the block copolymer lost its long-range order with an increase in the NP concentration. However, regular, latticelike aggregates obtained with γ-Fe₂O₃ NPs, because of the strong interparticle interactions, induced an intriguing morphological transformation from hexagonal cylinders to body-centered-cubic spheres via undulated cylinders, whereas the neat block copolymer did not show such a morphological transition over a wide range of temperatures. The interplay between magnetic NPs and the block copolymer was also tested with magnetic NPs of different sizes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3571–3579, 2006     

Mesoscopic simulation of metastable microphases in the order–order transition from gyroid-to-lamellar states of PS–PI diblock copolymer

The formation of metastable microphases during the order–order transition (OOT) from gyroid-to-lamellar states of a poly(styrene)–poly(isoprene) (PS–PI) copolymer has been investigated on a mesoscopic level using dissipative particle dynamics simulations. The formation of the gyroid microphase was obtained via an order–disorder transition process (ODT). The microphase was then subjected to thermal heating cycles. A thermodynamic instability of poly(styrene) microdomains due to temperature effects induces anisotropic composition fluctuations in the gyroid structure and a microphase transformation from gyroid-to-lamellar takes place via an OOT. Two metastable microphases (hexagonal perforated layers and cylinders) were detected during the thermal process. Results are consistent with experimental and theoretical studies.     

Nanostructured pure gamma-Fe2O3 via forced precipitation in an organic solvent

Pure maghemite, gamma-Fe(2)O(3), was prepared as ultra fine particles in the nanometer-sized range via the forced precipitation method in an organic solvent. The precipitation of iron(III) ions, from iron(III) chloride in 2-propanol led selectively to highly dispersed particles of ferrihydrite, which upon treatment with temperatures higher than 200 degrees C under dynamic vacuum resulted in high-surface-area particles of gamma-Fe(2)O(3). Precipitation in water also led to ferrihydrite, but the final product, after heating at 300 degrees C, contained a mixture of gamma-Fe(2)O(3) and alpha-Fe(2)O(3) (hematite). The precipitation from iron(III) nitrate in water resulted in goethite which was converted to hematite upon heating. On the other hand, the final product in 2-propanol was a mixture of maghemite and hematite. The products were characterized by FTIR, TGA, XRD, and gas sorption analysis. Nitrogen gas adsorption studies for the pure gamma-Fe(2)O(3) samples revealed mesoporous particles with high surface areas in the range of 70-120 m(2) g(-1) after heat treatment at 300 degrees C. The gamma-Fe(2)O(3) particles retained their gamma-phase as well as their mesoporous structure at relatively high temperatures, as high as 400 degrees C.     

Surfactant addition effects on dispersion and microdomain orientation in SBS triblock copolymer/alumina nanoparticle composites

The aim of this study was to investigate the effects of surfactant addition on the dispersion of 1–3 wt.% alumina nanoparticles on the self-assembled morphology of poly(styrene-b-butadiene-b-styrene) (SBS) linear triblock copolymer. The neat triblock copolymer microphase separated into PS cylinders self-assembled on a hexagonal array in the PB matrix, being the orientation of domains dependent on the annealing conditions. UV–vis and AFM analyses showed an improvement on dispersion of Al₂O₃ nanoparticles into SBS matrix by adding dodecanethiol as organic surfactant, due to its miscibility with PS block. Interactions between surfactant-coated Al₂O₃ nanoparticles with PS block were demonstrated by the variation on the glass transition temperature of this block. AFM analysis showed that the incorporation of surfactant-coated Al₂O₃ nanoparticles in the SBS matrix have great influence on the orientation of microphase separated domains in SBS nanocomposites.     

Cubic versus spherical magnetic nanoparticles: the role of surface anisotropy

The magnetic properties of maghemite (gamma-Fe2O3) cubic and spherical nanoparticles of similar sizes have been experimentally and theoretically studied. The blocking temperature, T(B), of the nanoparticles depends on their shape, with the spherical ones exhibiting larger T(B). Other low temperature properties such as saturation magnetization, coercivity, loop shift or spin canting are rather similar. The experimental effective anisotropy and the Monte Carlo simulations indicate that the different random surface anisotropy of the two morphologies combined with the low magnetocrystalline anisotropy of gamma-Fe2O3 is the origin of these effects.     

An in situ GISAXS study of selective solvent vapor annealing in thin block copolymer films: Symmetry breaking of in-plane sphere order upon deswelling

Thin films of asymmetric poly(styrene-b-4-vinylpyridine) (PS-b-P4VP) block copolymers are studied by means of in situ grazing-incidence small-angle X-ray scattering (GISAXS) during solvent vapor annealing in tetrahydrofuran, a solvent selective for the PS majority block of the copolymer. Upon swelling, PS-b-P4VP block copolymers form hexagonal arrays of spherical P4VP microdomains in a PS matrix in films 7–9 layers thick. Deswelling the films induces a transition from hexagonal to face-centered orthorhombic (fco) symmetry, which is stable only at ∼7 layers of spherical microdomains. Dry films show co-existing hexagonal and orthorhombic symmetries when the solvent is removed slowly, whereas instantaneous solvent removal suppresses the fco structure, resulting in films with only hexagonal structure. The in-plane order of microdomains is significantly deteriorated in dry films independent of the solvent removal rate.Spherical block copolymer microdomains are known to undergo a transition from hexagonal to orthorhombic packing in isothermally annealed thin films when the number of sphere layers is increased from 4 to 5. In this paper, in situ GISAXS experiments reveal that a similar transition occurs during solvent vapor annealing in a selective solvent. Interestingly, the transition from hexagonal to orthorhombic packing of spheres occurs as solvent is removed from a thin block copolymer film. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 331–338     

Use of water-dispersible Fe(2)O(3) nanoparticles with narrow size distributions in isolating avidin

Synthetic approaches that vigorously control the microstructures of water-dispersible gamma-Fe(2)O(3) nanoparticles such as size and size uniformity are of importance to the potential biological applications of these nanomaterials. In the present paper, water-dispersible gamma-Fe(2)O(3) nanocrystals with narrow size distributions (bipy-Fe(2)O(3)) were prepared via a site-exchange reaction. These particular materials are superparamagnetic and stable within a wide range of pH. Introduction of the biotin functionality onto the surfaces of bipy-Fe(2)O(3) enabled the affinity isolation of the protein avidin from its incubation solution magnetically with 96% efficiency.     

Self-assembling and size-selective synthesis of Ni and NiO nanoparticles embedded in ordered mesoporous carbon and polymer frameworks

We demonstrate the self-assembling and size-selective synthesis of uniform and highly dispersed Ni or NiO nanoparticles with diameters below 12 nm embedded in ordered mesoporous carbon or polymer frameworks. Self-assembly is induced by evaporation of the solvent from a mixture of metal-containing liquid crystalline (LC) mesophases of triblock copolymer and transition metal nitrate hydrate, and the carbon source is low-polymerized phenolic resol. Characterization by XRD, N(2) sorption isotherms, TEM, HRSEM, ICP-AES, TG, and XPS techniques has indicated an ordered 2D hexagonal mesostructure, high surface areas between 524 and 721 m(2) g(-1), uniform pore sizes of about 4.0 nm, large pore volumes ranging from 0.34 to 0.58 cm(3) g(-1), and metal contents ranging from 0.6 to 10.0 wt%. There is a high degree of dispersion, and a small size of nanoparticles throughout the whole framework, without aggregation outside of the pores due to the confinement effect of the mesoporous ordered matrix. The mesoporous solids show excellent adsorption properties for dyes and permit an easy magnetic separation procedure. This method is expected to be applicable to other mesoporous transition metal(oxide)-containing carbon catalysts.     

Synthesis and characterization of thermosensitive PNIPAM microgels covered with superparamagnetic gamma-Fe2O3 nanoparticles

In the present study we report a facile and reproducible method of preparing magnetic thermosensitive hybrid material based on P(NIPAM) microgels covered with gamma-Fe2O3 nanoparticles of 6-nm size. The iron oxide nanoparticles provided magnetic response to the microgels. In addition, the presence of the magnetic nanoparticles on the microgels altered their swelling behavior and shifted their volume phase transition temperature to higher values. In particular, for inorganic shells with 18% (w/w) of magnetic nanoparticles the volume phase transition of the microgels was shifted from 36 to 40 degrees C. In contrast, for shells consisting of 38% (w/w) magnetic nanoparticles the volume phase transition of the microgels was almost blocked, thus indicating that the microgel thermal response was strongly affected by the presence of the inorganic nanoparticles. The synthesized thermosensitive magnetic microgels are envisaged to be ideal for potential applications as thermosensitive targeted drug delivery systems.     

One-step synthesis of core(Cr)/shell(gamma-Fe(2)O(3)) nanoparticles

Core(Cr)/shell(gamma-Fe(2)O(3)) nanoparticles were synthesized by mixing Fe(CO)(5) and Cr(CO)(6) in the 9:1 ratio. These particles exhibit narrow size distribution with 13.5 nm as mean diameter and uniform spherical shape. The TEM image, which is in good agreement with the synchrotron powder XRD pattern, reveals the heterogeneous nature (core/shell structure). The analysis of the pattern reveals gamma-Fe(2)O(3) structure and a metal crystal structure. Mossbauer spectra, which support the superparamagnetic behavior determined by H-M measurement, do not show any traceable amount of Fe(0). This suggests that the metal component is Cr. EELS analysis and iron mapping suggest controlled stoichiometry and also confirm a core made of Cr and a shell made of gamma-Fe(2)O(3).