YF3:Ln3+ (Ln = Ce, Tb, Pr) submicrospindles: hydrothermal synthesis and luminescence properties

YF(3):Ln(3+) (Ln = Ce, Tb, Pr) microspindles were successfully fabricated by a facile hydrothermal method. X-Ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), lifetimes, photoluminescence (PL) and low-voltage cathodoluminescence (CL) were used to characterize the resulting samples. The lengths and diameters of YF(3):0.02Ce(3+) microspindles are around 760 nm and 230 nm, respectively. Adding dilute acid and trisodium citrate (Cit(3-)) are essential for obtaining YF(3) microspindles. A potential formation mechanism for YF(3) microspindles has been presented. PL spectroscopy investigations show that YF(3):Ce(3+) and YF(3):Tb(3+) microcrystals exhibit the characteristic emission of Ce(3+) 5d → 4f and Tb(3+ 5)D(4)→(7)F(J) (J = 6-3) transitions, respectively. In addition, the energy transfer from Ce(3+) to Tb(3+) was investigated in detail for YF(3):Ce(3+), Tb(3+) microspindles. Under the excitation of electron beams, YF(3):Pr(3+) show quantum cutting emission and YF(3):Ce(3+), Tb(3+) phosphors exhibit more intense green emission than the commercial phosphor ZnO:Zn.     

Electrospinning synthesis and luminescence properties of one-dimensional La(9.33)(SiO4)6O2: Ln3+ (Ln = Ce, Eu, Tb) microfibers

One-dimensional La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) microfibers were fabricated by a simple and cost-effective electrospinning method. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL) and low voltage cathodoluminescence (CL) as well as kinetic decay were used to characterize the resulting samples. SEM and TEM results indicated that the diameter of the microfibers annealed at 1000 °C for 3 h was 200-245 nm. The microfibers were further composed of fine and closely linked nanoparticles. La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) phosphors showed the characteristic emission of Ce(3+) (5d → 4f), Eu(3+) ((5)D(0)→(7)F(J)) and Tb(3+) ((5)D(3,4)→(7)F(J)) under ultraviolet excitation and low-voltage electron beams (3-5 kV) excitation. An energy transfer from Ce(3+) to Tb(3+) was observed in the La(9.33)(SiO(4))(6)O(2): Ce(3+), Tb(3+) phosphor under ultraviolet excitation and low-voltage electron beam excitation. Luminescence mechanisms were proposed to explain the observed phenomena. Blue, red and green emission can be realized in La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) microfibers by changing the doping ions. So the La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) phosphors have potential applications in full-color field emission displays.     

Niobium nitride films formed by rapid thermal processing (RTP): a study of depth profiles and interface reactions by complementary analytical techniques

The nitridation of niobium films approximately 250 and 650 nm thick by rapid thermal processing (RTP) at 800 °C in molecular nitrogen or ammonia was investigated. The niobium films were deposited by electron beam evaporation on silicon substrates covered by a 100 or 300 nm thick thermally grown SiO₂ layer. In these investigations the reactivity of ammonia and molecular nitrogen was compared with regard to nitride formation and reaction with the SiO₂ substrate layer. The phases formed were characterized by X-ray diffraction (XRD). Depth profiles of the elements in the films were recorded by use of secondary neutral mass spectrometry (SNMS). Microstructure and spatial distribution of the elements were imaged by transmission electron microscopy (TEM) and energy-filtered TEM (EFTEM). Electron energy loss spectra (EELS) were taken at selected positions to discriminate between different nitride, oxynitride, and oxide phases. The results provide clear evidence of the expected higher reactivity of ammonia in nitride formation and reaction with the SiO₂ substrate layer. Outdiffusion of oxygen into the niobium film and indiffusion of nitrogen from the surface of the film result in the formation of oxynitride in a zone adjacent to the Nb/SiO₂ interface. SNMS profiles of nitrogen reveal a distinct tail which is attributed to enhanced diffusion of nitrogen along grain boundaries.     

Two types of diffusions at the cathode/electrolyte interface in IT-SOFCs

Analytical transmission electron microscopy, in particular with the combination of energy dispersive X-ray spectroscopy (EDX) and electron energy-loss spectroscopy (EELS), has been performed to investigate the microstructure and microchemistry of the interfacial region between the cathode (La_0.6Sr_0.4Co_0.8Fe_0.2O₃, LSCF) and the electrolyte (Gd-doped ceria, GDC). Two types of diffusions, mutual diffusion between cathode and electrolyte as well as the diffusion along grain boundaries, have been clarified. These diffusions suggest that the chemical stability of LSCF and GDC are not as good as previously reported. The results are more noteworthy if we take into consideration the fact that such interdiffusions occur even during the sintering process of cell preparation.     

Nanocrystals of CeVO4 doped by metallic heteroions

CeVO(4) nanocrystals doped by heteroions were prepared via a hydrothermal method without the presence of surfactants or templates. Transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), solid state (51)V NMR, and inductively coupled plasma (ICP) were used to characterize the morphology, structure, and compositions of the materials. X-ray photoelectron spectroscopy (XPS) results confirmed that there is a valence change from Ce(3+) to Ce(4+) for a fraction of cerium atoms whereas the vanadium atoms remain in the pentavalent state V(5+) upon the substitution of Ca(2+) into CeVO(4). Raman spectroscopy was used to monitor the effects of the doping ion on the CeVO(4) lattice contraction and distortion. The appearance of the shifted and broadened Raman peaks for the doped CeVO(4) was interpreted by theoretical calculations performed with Vienna ab initio simulation package. The redox properties and photocatalytic activities of the obtained nanocrystals were also investigated and discussed in detail.     

碳锰洁净钢中镧和铈在晶界的行为

应用高分辨TEM，SEM和XRD研究碳锰洁净钢中镧和铈的存在形式、分布以及在晶界的行为。研究结果表明，镧和铈在洁净钢中存在固溶态、稀土夹杂物和稀土第二相。固溶稀土偏析在晶界，洁净钢中稀土仍有净化钢液和变质夹杂的作用。适量稀土能减少S和P在晶界的偏析，净化晶界提高钢的冲击韧性。过量稀土在晶界产生有害的稀土第二相，导致性能显著降低。     

In situ growth of epitaxial cerium tungstate (100) thin films

The deposition of ceria on a preoxidized W(110) crystal at 870 K has been studied in situ by photoelectron spectroscopy and low-energy electron diffraction. Formation of an epitaxial layer of crystalline cerium tungstate Ce(6)WO(12)(100), with the metals in the Ce(3+) and W(6+) chemical states, has been observed. The interface between the tungsten substrate and the tungstate film consists of WO suboxide. At thicknesses above 0.89 nm, cerium dioxide grows on the surface of Ce(6)WO(12), favoured by the limited diffusion of tungsten from the substrate.     

Performance of SnSb:Ce,Co alloy as anode for lithium-ion batteries

Synthesis of pure tin-antimony (SnSb) by co-precipitation method using metal chlorides as starting materials and Ce, Co-incorporated SnSb is reported and examined. The structure of the doped SnSb is compared with the pure SnSb by means of XRD analysis in which no structural variation is observed. Strain analysis is carried out by Williamson-Hall (WH) plot method. Compared to the intact SnSb, diminutive decrement in unit cell volume is observed for the doped SnSb, which indicates the rigidity of the structure after doping. The electrochemical properties are analyzed by cyclic voltammetry, electrochemical impedance spectroscopy, and reversibility testing. Improved redox activity and reversibility are observed for SnSb:Ce, Co anode due to the well-resolved grain and grain boundary regions. Doped anode exhibits specific capacitance around 319 Fg^?1 for 50 cycles. The augmented capacity and electrical conductivity of the SnSb:Ce, Co anode will enhance the rate capability of it, and this makes SnSb:Ce, Co a promising anode material for solid-state lithium-ion batteries in energy systems.     

Photocatalytic activity enhancement in doped titanium dioxide by crystal defects

Visible light sensitive Fe(3+) and Ce(4+) co-doped nano TiO(2) photocatalyst has been prepared by a modified aqueous sol-gel method and the activity has been measured in terms of degradation of MB dye. Both dopants shifted the absorption profile of TiO(2) to the visible region and improved activity. Fe(3+) ions trapped the charge carriers due to the stable electronic configuration and improved their separation. Ce(4+) ions, which were mainly located at the grain boundaries, cause dislocations by bending the valence and conduction bands of TiO(2) and prevent the recombination of photoexcited electrons and holes. The co-doped TiO(2) compositions exhibited higher photocatalytic activity than that of pure titania and commercially available Degussa P25 under visible light by utilising the individual and synergistic contributions of Fe(3+) and Ce(4+) dopants, respectively.     

Er3+和Ce3+/Ce4+掺杂β-BaB2O4纳米棒的制备、结构与发光性质

以Ba(NO3)2、NaBH4、Er2O3和CeO2为原料, 在十六烷基三甲基溴化铵(CTAB)表面活性剂辅助下, 采用水热法制备了β-BaB2O4 (β-BBO)纳米棒, 稀土离子Er3+单掺杂的β-BBO(β-BBO:Er3+)及Er3+和Ce3+/Ce4+共掺杂的β-BBO(β-BBO:Er3+/Ce3+/Ce4+)纳米棒. 通过X射线粉末衍射(XRD)、傅里叶变换红外(FTIR)光谱、拉曼光谱、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)和光致发光(PL)光谱分别对样品的物相、结构、形貌、成分及光致发光性质进行了表征. 研究结果表明: 微量稀土离子掺杂并不改变β-BBO的结构, 制得的纳米棒尺寸均匀, 长度在200-500 nm 之间, 直径在10-20 nm 之间; β-BBO:Er3+和β-BBO:Er3+/Ce3+/Ce4+纳米棒在400nm光激发下, 在可见光范围内都观察到中心波长为515和542 nm的绿光. 对发光机理的初步研究表明: 发光分别对应于Er3+的2H11/2→4I15/2, 4S3/2→4I15/2跃迁, 铈离子以Ce3+和Ce4+两种形式存在于体系中, Ce3+对Er3+起敏化作用, 可以显著增强β-BBO:Er3+/Ce3+/Ce4+纳米棒的发光强度, 存在Ce3+→Er3+的能量传递过程.     

Cellulose acetate-directed growth of bamboo-raft-like single-crystalline selenium superstructures: high-yield synthesis, characterization, and formation mechanism

High-yield synthesis of bamboo-raft-like single-crystalline selenium superstructures has been realized for the first time via a facile solvothermal approach by reducing SeO2 with ethylene alcohol in the presence of cellulose acetate. The formation of a raftlike superstructure with various forms is strongly dependent on the temperature, amount of cellulose acetate, reaction time, and even preheating treatment. The suitable amount of cellulose acetate is essential for the formation of elegant and uniform raft Se. The morphology, microstructure, optical properties, and chemical compositions of bamboo-raft-like selenium were characterized using various techniques (X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy (TEM), high-resolution (HR) TEM, X-ray photoelectron spectroscopy, UV-vis spectroscopy, FTIR spectroscopy, and Raman spectroscopy). A possible growth mechanism has been proposed. Such special superstructures could provide a useful precursor for potential applications.     

The intrinsic origin of the grain-boundary resistance in Sr-doped LaGaO3

Abstract  

In this paper I summarize our recent investigations (Park and Kim, Phys Chem C 111:14903, 2007; Solid State Ionics 179:1329, 2008) on the origin of the grain-boundary resistance in a doped LaGaO₃, a perovskite-structured solid electrolyte. The partial electronic and ionic resistances of the bulk and the grain boundaries, as well as the total resistance, in 1 mol% Sr-doped LaGaO₃ were measured separately by means of a dc-polarization method and ac-impedance spectroscopy. Both of the partial resistances at the grain boundaries were greater than the bulk counterparts, indicating that the grain boundaries impede the ionic as well as the electronic transport in this material. The transference number of the partial electronic conductivity at the grain boundary was however greater than that in the bulk. This fact strongly suggests that both electronic and ionic charge carriers deplete at the grain boundaries to form the space-charge zones and that the grain-boundary cores in this material are positively charged. In light of the fact that the effective charge of the oxygen vacancy (+2) is greater than that of the electron hole (+1), the oxygen vacancies deplete more sharply in the space-charge zones compared to the electron holes such that the grain boundaries become more mixed conducting relative to the bulk. These observations verify that the electrical conduction across the grain-boundaries in 1 mol% Sr-doped LaGaO₃ is governed by the space charge.     

Identification of disclinations in the structure of strongly deformed materials

The deformation of metallic materials up to large strains leads to the formation of fine grain structures (down to the nanometric scale) with high densities of grain boundaries and grain boundary junctions. Such structures demonstrate significant lattice rotations and the presence of disclination defects at grain boundary junctions. We present the results of transmission electron microscopy (TEM) observations of disclinations in strongly deformed metals and describe the theoretical approaches for their identification.     

Investigation of hydrothermal routes to mixed-metal cerium titanium oxides and metal oxidation state assignment using XANES

The reaction between TiF(3) or TiO(2) and Ce(3+) in sodium hydroxide solutions yields highly crystalline NaCeTi(2)O(6) at room temperature and under mild hydrothermal conditions (T < or = 240 degrees C). There is no evidence for the formation of ternary Ce-Ti-O materials by this method, and the use of bases other than NaOH always produces poorly crystalline materials. The material NaCeTi(2)O(6) has a distorted perovskite structure with sodium and cerium ions randomly occupying the A sites: Pnma, a = 5.4517(8) A, b = 7.7292(6) A, c =5.4573(3) A. XANES spectroscopy at the Ti K edge and Ce L(III) edge, with reference to crystalline model compounds, reveals that cerium is found solely as Ce(III) and titanium as Ti(IV) in NaCeTi(2)O(6). Isomorphous substitution of Ce(3+) by Nd(3+) or Ti(4+) by V(4+) is found to be very facile under hydrothermal conditions (at a temperature of 240 degrees C), by addition of appropriate amounts of metal salts to the hydrothermal reaction mixtures. The series NaCe(1-x)Nd(x)Ti2O6 (0 < or = x < or = 1) and NaCeTi(2-x)V(x)O6 (0 相似文献   

TEM investigation of formation mechanism of monocrystal-thick b-oriented pure silica zeolite MFI film

The first direct transmission electron microscopic (TEM) observation has been carried out on the continuous monocrystal-thick b-oriented pure silica zeolite MFI films produced by in situ crystallization. The self-supporting film samples for TEM study were fabricated by dissolving the steel substrate with acid. This TEM study is free of those artifacts that are typically associated with TEM sample preparations, and allows us to investigate the "true" structure and texture of a very large area of the film and at the same time to focus at will on each individual zeolite crystal in the film. Abundant TEM information including crystallographic orientation relationships among crystals in the film (both out-of-plane and in-plane), grain boundaries, and each crystal grain was obtained. This TEM investigation provides direct unambiguous new evidence to support the homogeneous nucleation mechanism, by which the films form through homogeneous nucleation and crystal growth in the bulk to form equal-sized disk-shape crystals, followed by self-assembly of these crystals onto the substrate to produce a two-dimensional close-packed structure. The last stage of the film formation involves simultaneous space-limited growth and rotation of the individual crystals to realize the in-plane crystallographic control within the film.     

Surface and grain boundary segregation in 16MND5 steel

An adequate model of quantification when there are many segregating elements is required for industry and research. Hence, for the first time, surface segregation kinetics on industrial 16MND5 steel was studied by XPS spectroscopy at temperatures ranging from 500 to 600 ^oC. From measurements that highlight the competitive segregation of P, S, Sn, Sb, As, and Cu impurities at the surface, a quantification model was developed and successfully used to deduce the surface concentrations during segregation kinetics as well as derive the corresponding diffusion coefficients. We observed that phosphorus and sulfur are the first elements covering the surface, then they are supplanted by others' impurities. This result may reflect impurities segregation behavior at the grain boundaries that impacts mechanical behavior of the material. Indeed, to further the research, 16MND5 samples were aged in the same range of temperatures. Then, Auger spectroscopy measurements at grain boundaries were conducted on broken samples exhibiting intergranular cracking. Results show that phosphorus is the only segregating element present at grain boundaries after 2 months of aging. Importantly, it appears that phosphorus grain boundary segregation kinetics is significantly lower than at surface. Copyright © 2017 John Wiley & Sons, Ltd.     

Probing the 4f states of ceria by tunneling spectroscopy

Low-temperature scanning tunneling microscopy and spectroscopy have been employed to analyze the local electronic structure of the (111) surface of a ceria thin film grown on Ru(0001). On pristine, defect-free oxide terraces, the empty 4f states of Ce(4+) ions appear as the only spectral feature inside the 6 eV oxide band gap. In contrast, occupied states are detected between -1.0 and -1.5 eV below E(Fermi) in conductance spectra of different point and line defects, such as surface oxygen vacancies, grain boundaries and step edges. They are assigned to partially filled 4f states localized at the Ce(3+) ions. The presence of excess electrons indicates the oxygen-deficient nature of the direct oxide environment. The f state spectroscopy with the STM allows us to probe the spatial distribution of Ce(3+) ions in the ceria surface, providing unique insight into the local reduction state of this chemically important material system.     

The intrinsic origin of the grain-boundary resistance in Sr-doped LaGaO<Subscript>3</Subscript>

Abstract  In this paper I summarize our recent investigations (Park and Kim, Phys Chem C 111:14903, 2007; Solid State Ionics 179:1329, 2008) on the origin of the grain-boundary resistance in a doped LaGaO₃, a perovskite-structured solid electrolyte. The partial electronic and ionic resistances of the bulk and the grain boundaries, as well as the total resistance, in 1 mol% Sr-doped LaGaO₃ were measured separately by means of a dc-polarization method and ac-impedance spectroscopy. Both of the partial resistances at the grain boundaries were greater than the bulk counterparts, indicating that the grain boundaries impede the ionic as well as the electronic transport in this material. The transference number of the partial electronic conductivity at the grain boundary was however greater than that in the bulk. This fact strongly suggests that both electronic and ionic charge carriers deplete at the grain boundaries to form the space-charge zones and that the grain-boundary cores in this material are positively charged. In light of the fact that the effective charge of the oxygen vacancy (+2) is greater than that of the electron hole (+1), the oxygen vacancies deplete more sharply in the space-charge zones compared to the electron holes such that the grain boundaries become more mixed conducting relative to the bulk. These observations verify that the electrical conduction across the grain-boundaries in 1 mol% Sr-doped LaGaO₃ is governed by the space charge. Graphical Abstract        

AES study of underclad cracking

The present work deals with the occurrence of underclad cracks in three types of steels differing in the contents of the alloying elements (Cr, Ni, Mn) and in the impurities level (As, Sb, Sn). The presence of the intercrystalline fracture typical for the underclad cracks was proved to be dependent on the temperature and on the ageing time. It follows from the results of Auger electron spectroscopy, that the sulphur and phosphorus segregations accompanied by a higher number of carbide (possibly sulphide) particles cause a decrease of grain boundary strength. Segregations of other impurity elements were not detected at grain boundaries.     

Mechanism of corrosion inhibition of AA2024 by rare-earth compounds

The mechanism of corrosion protection of the widely used 2024-T3 aluminum alloy by cerium and lanthanum inhibitors in chloride media is described in detail in the present work. The corrosion process was investigated by means of scanning Kelvin probe force microscopy (SKPFM), in situ atomic force microscopy, and scanning electron microscopy coupled with energy dispersive spectroscopy. Employment of the high-resolution and in situ techniques results in a deep understanding of the details of the physical chemistry and mechanisms of the corrosion processes. The applicability of the SKPFM for mechanistic analysis of the effect of different corrosion inhibitors is demonstrated for the first time. The inhibitors under study show sufficient hindering of the localized corrosion processes especially in the case of pitting formation located around the intermetallic S-phase particles. The main role of Ce(3+) and La(3+) in the corrosion protection is formation of hydroxide deposits on S-phase inclusions buffering the local increase of pH, which is responsible for the acceleration of the intermetallics dealloying. The formed hydroxide precipitates can also act as a diffusion barrier hindering the corrosion processes in active zones. Cerium nitrate exhibits higher inhibition efficiency in comparison with lanthanum nitrate. The higher effect in the case of cerium is obtained due to lower solubility of the respective hydroxide. A detailed mechanism of the corrosion process and its inhibition is proposed based on thermodynamic analysis.