Signal amplification for DNA detection based on the HRP-functionalized Fe3O4 nanoparticles

An electrochemical approach for the sensitive detection of sequence-specific DNA has been developed. Horseradish peroxidase (HRP) assembled on the Fe₃O₄ nanoparticles (NPs) were utilized as signal amplification sources. High-content HRP was adsorbed on the Fe₃O₄ NPs via layer-by-layer (LbL) technique to prepare HRP-functionalized Fe₃O₄ NPs. Signal probe and diluting probe were then immobilized on the HRP-functionalized Fe₃O₄ NPs through the bridge of Au NPs. Thereafter, the resulting DNA-Au-HRP-Fe₃O₄ (DAHF) bioconjugates were successfully anchored to the gold nanofilm (GNF) modified electrode surface for the construction of sandwich-type electrochemical DNA biosensor. The electrochemical behaviors of the prepared biosensor had been investigated by the cyclic voltammetry (CV), chronoamperometry (i-t), and electrochemical impedance spectroscopy (EIS). Under optimal conditions, the proposed strategy could detect the target DNA down to the level of 0.7 fmol with a dynamic range spanning 4 orders of magnitude and exhibited excellent discrimination to two-base mismatched DNA and non-complementary DNA sequences.     

Simple surface functionalization of magnetic nanoparticles with methotrexate-conjugated bovine serum albumin as a biocompatible drug delivery vehicle

Magnetic nanoparticles (MNPs) functionalized with methotrexate (MTX)-conjugated bovine serum albumin (BSA) as a biocompatible drug delivery vehicle were synthesized using a facile method. Characterization of the functionalized MNPs (Fe₃O₄@BSA-MTX NPs) was performed using various techniques including UV–visible spectroscopy, dynamic light scattering, vibrating sample magnetometry and X-ray diffraction. The particle size and zeta potential of Fe₃O₄@BSA-MTX NPs were 105.7 ± 3.81 nm (mean ± SD) and −18.2 mV, respectively. MTX release from Fe₃O₄@BSA-MTX NPs showed an enzyme-dependent release pattern. Hemo-biocompatibility of Fe₃O₄@BSA-MTX NPs was confirmed using hemolysis test. In addition, the cytotoxicity of functionalized MNPs and free MTX against MCF-7 cell line was investigated using MTT assay. The results of experiments revealed that the Fe₃O₄@BSA-MTX NPs as a biocompatible carrier could improve the therapeutic effect of MTX.     

Simple Surfactant Concentration‐Dependent Shape Control of Polyhedral Fe3O4 Nanoparticles and Their Magnetic Properties

The shape and size of monodisperse Fe₃O₄ nanoparticles (NPs) are controlled using a chemical solution synthesis in the presence of the surfactant cetylpyridinium chloride (CPC). Cubic Fe₃O₄ NPs surrounded by six {100} planes are obtained in the absence of CPC. Increasing the CPC content during synthesis causes the shape of the resulting Fe₃O₄ NPs to change from cubic to truncated cubic, cuboctahedral, truncated octahedral, and finally octahedral. During this evolution, the predominantly exposed planes of the Fe₃O₄ NPs vary from {100} to {111}. The shape control results from the synergistic effect of the pyridinium cations, chloride anions, and long‐chain alkyl groups of CPC, which is confirmed by comparison with NPs synthesized in the presence of various related cationic surfactants. The size of the cubic Fe₃O₄ NPs can be tuned from 50 to 200 nm, by changing the concentration of oleic acid in the reaction solution. The Fe₃O₄ NPs exhibit shape‐dependent saturation magnetization, remanent magnetization, and coercivity.     

A comparative study on thermoresponsive magnetic nanohydrogels: role of surface-engineered magnetic nanoparticles

A comparative study of thermoresponsive poly(N-isopropylacrylamide)(PNIPAAm)-chitosan (CS)-based magnetic nanohydrogels (MNHGs) encapsulating functionalized Fe₃O₄ nanoparticles (NPs) in terms of the parameters governing their suitability for real hyperthermia is reported. Iron oxide NPs functionalized with (a) citric acid (CA-Fe₃O₄), (b) ethylenediamine (Amine-Fe₃O₄) and (c) dimercaptosuccininc (DMSA-Fe₃O₄) have been synthesized and their encapsulation into MNHGs was obtained through physical encapsulation method. The structural characterizations of synthesized materials include X-ray diffraction, FT-IR, TGA, ICP-AES and X-ray photoelectron spectroscopy (XPS). Encapsulation of the functionalized NPs into MNHGs were observed in TEM micrographs, while SEM and AFM micrographs confirmed their spherical morphology (~250–300 nm). Lower critical solution temperature (LCST) variation was measured by UV–visible spectrophotometer and differential scanning calorimetry (DSC). MNHGs exhibited sufficient magnetization and heating ability for hyperthermia. Typically, hydrogels containing CA-Fe₃O₄ (50 mg/ml) raised the temperature of the medium to 43 °C, a suitable dose for in vivo application in tumor-bearing mice.     

Pd embedded N,S co‐doped graphene wrapped core‐shell magnetic nanospheres: Engineered stable nanocatalyst for Suzuki couplings

Designed nitrogen and sulfur co‐doped graphene wrapped magnetic core‐shell supported Pd nanoparticles were synthesized through the following steps. Firstly, Fe₃O₄ was prepared, coated with silica and then functionalized with amine groups to create a positive charge on the structure for enhancing the interaction of the Fe₃O₄@SiO₂ with graphene oxide. Secondary, the pre‐catalyst wrapped with graphene to enhance adsorption of aromatic substrates through π–π stacking. Thirdly, graphene was doped with nitrogen and sulfur to increase the grafting of Pd in hybrid. Finally, Pd NPs were attached on the surface of pre‐engineered structure to produce Fe₃O₄@SiO₂@N,S‐wG@Pd which exhibited high performance in Suzuki reactions. This superior activity can be indexed to the incorporation of N and S atoms into graphene led to high anchoring and well‐dispersion of Pd NPs on the nanocomposite surface offering large amounts of active centers, that strongly increased the interaction between Pd and substrates to decreases Pd leaching.     

Preparation of novel magnetic fluorescent microspheres from copperas and fluorescence enhancement with zinc ions

The aim of this study is to develop a new method for the preparation of Fe₃O₄@SiO₂–An NPs from copperas. The core–shell structures of the nanoparticles and chemical composition have been confirmed by TEM, XRD and FTIR techniques. Fluorescence Enhancement of Fe₃O₄@SiO₂–An NPs with zinc ions was investigated by fluorescence emission spectra. The results indicated that the Fe₃O₄ NPs with a high purity (Total Fe 72.16 %) were obtained from copperas by chemical co-precipitation method and have a uniform spherical morphology with an average diameter of about 10 nm. The Fe₃O₄ NPs coated with silica nanoparticles were prepared, and an attempt had been made that the Fe₃O₄@SiO₂ NPs were modified by 3-aminopropyltriethoxysilane and 9-anthranone successively. The recommended mole ratio of ethanol to water and the content of ammonia water added were 4:1 and 25 wt% respectively, which have an obviously effect on the combination of the final well-ordered MNPs with the amino functionalities and reactant components. The functionalized Fe₃O₄@SiO₂–An NPs have a fluorescence property and this fluorescence effect can be enhanced with the Zn²⁺ ions attachment. Meanwhile, the saturated magnetization of Fe₃O₄@SiO₂–An NPs was 37.8 emug^?1 at 25 °C and this fluorescent material exhibited excellent magnetic properties. A new way was therefore provided for the comprehensive utilization of the unmarketable copperas. Moreover, the functionalized Fe₃O₄@SiO₂–An NPs have a big potential in environmental decontamination, medical technology and biological science.     

Ultrafast Preparation of Monodisperse Fe3O4 Nanoparticles by Microwave‐Assisted Thermal Decomposition

Thermal decomposition, as the main synthetic procedure for the synthesis of magnetic nanoparticles (NPs), is facing several problems, such as high reaction temperatures and time consumption. An improved a microwave‐assisted thermal decomposition procedure has been developed by which monodisperse Fe₃O₄ NPs could be rapidly produced at a low aging temperature with high yield (90.1 %). The as‐synthesized NPs show excellent inductive heating and MRI properties in vitro. In contrast, Fe₃O₄ NPs synthesized by classical thermal decomposition were obtained in very low yield (20.3 %) with an overall poor quality. It was found for the first time that, besides precursors and solvents, magnetic NPs themselves could be heated by microwave irradiation during the synthetic process. These findings were demonstrated by a series of microwave‐heating experiments, Raman spectroscopy and vector‐network analysis, indicating that the initially formed magnetic Fe₃O₄ particles were able to transform microwave energy into heat directly and, thus, contribute to the nanoparticle growth.     

Separation of chiral compounds using magnetic molecularly imprinted polymer nanoparticles as stationary phase by microchip capillary electrochromatography

In this work, a simple and rapid approach was developed for separation and detection of chiral compounds based on a magnetic molecularly imprinted polymer modified poly(dimethylsiloxane) (PDMS) microchip coupled with electrochemical detection. Molecularly imprinted polymers were prepared employing Fe₃O₄ nanoparticles (NPs) as the supporting substrate and norepinephrine as the functional monomer in the presence of template molecule in a weak alkaline solution. After extracting the embedded template molecules, Fe₃O₄@polynorepinephrine NPs (MIP–Fe₃O₄@PNE NPs) showed specific molecular recognition selectivity and high affinity towards the template molecule, which were then used as stationary phase of microchip capillary electrochromatography for chiral compounds separation. Mandelic acid and histidine enantiomers were used as model compounds to test the chiral stationary phase. By using R‐mandelic acid as the template molecule, mandelic acid enantiomer was effectively separated and detected on the MIP‐Fe₃O₄@PNE NPs modified PDMS microchip. Moreover, the successful separation of histidine enantiomers on the MIP–Fe₃O₄@PNE NPs modified microchip using L‐histidine as template molecule was also achieved.     

Study of magnetic ferrite nanoparticles labeled with <Superscript>99m</Superscript>Tc-pertechnetate

This study examined the applications of novel non-polymer magnetic ferrite nanoparticles (Fe₃O₄ NPs) labeled with ^99mTc-pertechnetate (^99mTcO₄ ⁻). The radiochemistry, chemistry, and biodistribution of Fe₃O₄ NPs labeled with ^9mTcO₄ ⁻ were analyzed. This paper employed instant thin layer chromatography and magnetic adsorption to evaluate the labeling efficiency and stability of ^99mTc-Fe₃O₄ at various reaction conditions. A scanning electron microscope, X-ray diffractometer, Fourier transform infrared spectrometer, laser particle size analyzer, and superconducting quantum interference device magnetometer were used to analyze the physical and chemical properties of the Fe₃O₄ and ⁹⁹Tc-Fe₃O₄ nanoparticles. The biodistribution and excretion of ^99mTc-Fe₃O₄ were also investigated. Radiochemical analyses showed that the labeling efficiency was over 92% after 1 min in the presence of a reducing agent. Hydroxyl and amine groups covered the surface of the Fe₃O₄ particles. Therefore, ⁹⁹Tc (VII) reduced to lower oxidation states and might bind to Fe₃O₄ NPs. The sizes of the ⁹⁹Tc-Fe₃O₄ NPs were about 600 nm without ultrasound vibrations, and the particle sizes were reduced to 250 nm under ultrasound vibration conditions. Nonetheless, Fe₃O₄ NPs and ⁹⁹Tc-Fe₃O₄ NPs exhibited superparamagnetic properties, and the saturation magnetization values were about 55 and 47 emu/g, respectively. The biodistribution showed that a portion of the ^99mTc-Fe₃O₄ nanoparticles might embolize in a pulmonary capillary initially; the embolism radioactivity was cleared from the lungs and was then taken up by the liver. ^99mTc-Fe₃O₄ metabolized very slowly only 1–2% of the injected dose (ID) was excreted in urine and about 2.37% ID/g was retained in the liver 4 h after injection. Radiopharmaceutically, ^99mTc-Fe₃O₄ NPs displayed long-term retention, and only ^99mTc-Fe₃O₄ NPs that dissociated to free pertechnetate could be excreted in urine. This research evaluated the feasibility of non-polymer magnetic ferrite NPs labeled with technetium as potential radiopharmaceuticals in nuclear medicine.     

Synthesis of Fe3O4@SiO2-Au/Cu magnetic nanoparticles and its efficient catalytic performance for the Ullmann coupling reaction of bromamine acid

Over bimetallic Au/Cu catalyst supported on magnetic Fe₃O₄ nanoparticles, water-mediated bromamine acid could be selectively converted into 4,4'-diamino-1,1'-dianthraquinonyl-3,3'-disulfonic acid (DAS) with a yield of 88.67%. The magnetic catalyst could be readily separated and reused.     

Improvement on physical properties of polyethersulfone membranes modified by poly(1‐vinylpyrrolidone) grafted magnetic Fe3O4@SiO2 nanoparticles

Polyethersulfone (PES) and poly(1‐vinylpyrrolidone) (PVP) were used to prepare ultrafiltration membranes with grafted Fe₃O₄ magnetic nanoparticles (PVP‐g‐Fe₃O₄@SiO₂). The structure of synthesized PVP‐g‐Fe₃O₄@SiO₂ was confirmed by FT‐IR and SEM analysis. Physical properties of blend membranes such as thermal resistance, Tensile strength, water uptake, and hydrophilicity were also investigated. Blended membranes of PES/PVP‐g‐Fe₃O₄@SiO₂ have exhibited higher thermal resistance due to increasing the modified nanoparticle content. The hydrophilicity of the synthesized PES/PVP‐g‐Fe₃O₄@SiO₂ membranes also improved by increasing the PVP‐g‐Fe₃O₄@SiO₂ content. As expected, increasing the hydrophilicity of blended membrane, caused enhancement of fouling resistance in membranes. Results showed that the content of PVP‐g‐Fe₃O₄@SiO₂ has different effects on the properties of synthesized composite membranes. Despite increasing the content of PVP‐g‐Fe₃O₄@SiO₂ has a negative effect on elongation, positive effects on maximum stress was observed. Moreover, the water uptake of synthesized membranes was significantly enhanced in comparison to other similar studies.     

Double‐Layered Plasmonic–Magnetic Vesicles by Self‐Assembly of Janus Amphiphilic Gold–Iron(II,III) Oxide Nanoparticles

Janus nanoparticles (JNPs) offer unique features, including the precisely controlled distribution of compositions, surface charges, dipole moments, modular and combined functionalities, which enable excellent applications that are unavailable to their symmetrical counterparts. Assemblies of NPs exhibit coupled optical, electronic and magnetic properties that are different from single NPs. Herein, we report a new class of double‐layered plasmonic–magnetic vesicle assembled from Janus amphiphilic Au‐Fe₃O₄ NPs grafted with polymer brushes of different hydrophilicity on Au and Fe₃O₄ surfaces separately. Like liposomes, the vesicle shell is composed of two layers of Au‐Fe₃O₄ NPs in opposite direction, and the orientation of Au or Fe₃O₄ in the shell can be well controlled by exploiting the amphiphilic property of the two types of polymers.     

Preparation and characterization of flexible polyurethane foam nanocomposites reinforced by magnetic core-shell Fe3O4@APTS nanoparticles

Novel magnetic polyurethane flexible foam nanocomposites were synthesized by incorporation of aminopropyltriethoxysilane (APTS) functionalized magnetite nanoparticles (MNPs) via one-shot method. The functionalized MNPs (Fe₃O₄@APTS) were synthesized by co-precipitation of the Fe²⁺ and Fe³⁺ with NH₄OH and further functionalization with APTS onto the surface of MNPs by sol–gel method. The magnetic core-shell NPs were used up to 3.0 % in the foam formulation and the magnetic nanocomposites prepared successfully. The results of thermogravimetric analysis (TGA) showed an increasing in thermal stability of polyurethane nanocomposite foam at initial, 5 and 10 %, and maximum thermal decomposition temperatures by incorporation of Fe₃O₄@APTS. In addition SEM images revealed the uniformity of the foam structures and decreasing in pore sizes. Furthermore, VSM result showed super paramagnetic behavior for Fe₃O₄@APTS-PU nanocomposites.     

Facile synthesis of multifunctional multiwalled carbon nanotubes/Fe3O4 nanoparticles/polyaniline composite nanotubes

With an average diameter of 100-150 nm, composite nanotubes of polyaniline (PANI)/multiwalled carbon nanotubes (MWNTs) containing Fe₃O₄ nanoparticles (NPs) were synthesized by a two-step method. First, we synthesized monodispersed Fe₃O₄ NPs (d=17.6 nm, σ=1.92 nm) on the surface of MWNTs and then decorated the nanocomposites with a PANI layer via a self-assembly method. SEM and TEM images indicated that the obtained samples had the morphologies of nanotubes. The molecular structure and composition of MWNTs/Fe₃O₄ NPs/PANI nanotubes were characterized by Fourier transform infrared spectra (FTIR), energy dispersive X-ray spectrometry (EDX), X-ray photoelectron spectra (XPS), X-ray diffraction (XRD) and Raman spectra. UV-vis spectra confirmed the existence of PANI and its response to acid and alkali. As a multifunctional material, the conductivity and magnetic properties of MWNTs/Fe₃O₄ NPs/PANI composites nanotubes were also investigated.     

First Report of Fruit Rot of Cherry and Its Control Using Fe2O3 Nanoparticles Synthesized in Calotropis procera

Cherry is a fleshy drupe, and it is grown in temperate regions of the world. It is perishable, and several biotic and abiotic factors affect its yield. During April–May 2021, a severe fruit rot of cherry was observed in Swat and adjacent areas. Diseased fruit samples were collected, and the disease-causing pathogen was isolated on PDA. Subsequent morphological, microscopic, and molecular analyses identified the isolated pathogen as Aspergillus flavus. For the control of the fruit rot disease of cherry, iron oxide nanoparticles (Fe₂O₃ NPs) were synthesized in the leaf extract of Calotropis procera and characterized. Fourier transform infrared (FTIR) spectroscopy of synthesized Fe₂O₃ NPs showed the presence of capping and stabilizing agents such as alcohols, aldehydes, and halo compounds. X-ray diffraction (XRD) analysis verified the form and size (32 nm) of Fe₂O₃ NPs. Scanning electron microscopy (SEM) revealed the spinal-shaped morphology of synthesized Fe₂O₃ NPs while X-ray diffraction (EDX) analysis displayed the occurrence of main elements in the samples. After successful preparation and characterization of NPs, their antifungal activity against A. flavus was determined by poison technique. Based on in vitro and in vivo antifungal activity analyses, it was observed that 1.0 mg/mL concentration of Fe₂O₃ can effectively inhibit the growth of fungal mycelia and decrease the incidence of fruit rot of cherry. The results confirmed ecofriendly fungicidal role of Fe₂O₃ and suggested that their large-scale application in the field to replace toxic chemical fungicides.     

Controlled assembly of superparamagnetic iron oxide nanoparticles on electrospun PU nanofibrous membrane: A novel heat-generating substrate for magnetic hyperthermia application

A facile method of fabricating novel heat-generating membranes composed of electrospun polyurethane (PU) nanofibers decorated with superparamagnetic iron oxide nanoparticles (NPs) is reported. Electrospinning was used to produce polymeric nanofibrous matrix, whereas polyol immersion technique allowed in situ assembly of well-dispersed Fe₃O₄ NPs on the nanofibrous membranes without any surfactant, and without sensitizing and stabilizing reagent. The assembly phenomena can be explained by the hydrogen-bonding interactions between the amide groups in the PU matrix and the hydroxyl groups capped on the surface of the Fe₃O₄ NPs. The prepared nanocomposite fibers showed acceptable magnetization value of 33.12 emu/g, after measuring the magnetic hysteresis loops using SQUID. Moreover, the inductive heating property of electrospun magnetic nanofibrous membranes under an alternating current (AC) magnetic field was investigated. We observed a progressive increase in the heating rate with the increase in the amount of magnetic Fe₃O₄ NPs in/on the membranes. The present electrospun magnetic nanofibrous membrane may be a potential candidate as a novel heat-generating substrate for localized hyperthermia cancer therapy.     

Efficiency of Fe3O4 Nanoparticles with Different Pretreatments for Enhancing Biogas Yield of Macroalgae Ulva intestinalis Linnaeus

In this work, different pretreatment methods for algae proved to be very effective in improving cell wall dissociation for biogas production. In this study, the Ulva intestinalis Linnaeus (U. intestinalis) has been exposed to individual pretreatments of (ultrasonic, ozone, microwave, and green synthesized Fe₃O₄) and in a combination of the first three mentioned pretreatments methods with magnetite (Fe₃O₄) NPs, (ultrasonic-Fe₃O₄, ozone-Fe₃O₄ and microwave-Fe₃O₄) in different treatment times. Moreover, the green synthesized Fe₃O₄ NPs has been confirmed by FTIR, TEM, XRD, SEM, EDEX, PSA and BET. The maximum biogas production of 179 and 206 mL/g VS have been attained when U. intestinalis has been treated with ultrasonic only and when combined microwave with Fe₃O₄ respectively, where sediment were used as inoculum in all pretreatments. From the obtained results, green Fe₃O₄ NPs enhanced the microwave (MW) treatment to produce a higher biogas yield (206 mL/g VS) when compared with individual MW (84 mL/g VS). The modified Gompertz model (R² = 0.996 was appropriate model to match the calculated biogas production and could be used more practically to distinguish the kinetics of the anaerobic digestion (AD) period. The assessment of XRD, SEM and FTIR discovered the influence of different treatment techniques on the cell wall structure of U. intestinalis.     

Synthesis of novel magnetic sulfur-doped Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles for efficient removal of Pb(II)

In this work, we report the synthesis of magnetic sulfur-doped Fe₃O₄ nanoparticles (Fe₃O₄:S NPs) with a novel simple strategy, which includes low temperature multicomponent mixing and high temperature sintering. The prepared Fe₃O₄:S NPs exhibit a much better adsorption performance towards Pb(II) than bare Fe₃O₄ nanoparticles. FTIR, XPS, and XRD analyses suggested that the removal mechanisms of Pb(II) by Fe₃O₄:S NPs were associated with the process of precipitation (formation of PbS), hydrolysis, and surface adsorption. The kinetic studies showed that the adsorption data were described well by a pseudo second-order kinetic model, and the adsorption isotherms could be presented by Freundlich isotherm model. Moreover, the adsorption was not significantly affected by the coexisting ions, and the adsorbent could be easily separated from water by an external magnetic field after Pb(II) adsorption. Thus, Fe₃O₄:S NPs are supposed to be a good adsorbents for Pb(II) ions in environmental remediation.     

Double-Layered Plasmonic–Magnetic Vesicles by Self-Assembly of Janus Amphiphilic Gold–Iron(II,III) Oxide Nanoparticles

Janus nanoparticles (JNPs) offer unique features, including the precisely controlled distribution of compositions, surface charges, dipole moments, modular and combined functionalities, which enable excellent applications that are unavailable to their symmetrical counterparts. Assemblies of NPs exhibit coupled optical, electronic and magnetic properties that are different from single NPs. Herein, we report a new class of double-layered plasmonic–magnetic vesicle assembled from Janus amphiphilic Au-Fe₃O₄ NPs grafted with polymer brushes of different hydrophilicity on Au and Fe₃O₄ surfaces separately. Like liposomes, the vesicle shell is composed of two layers of Au-Fe₃O₄ NPs in opposite direction, and the orientation of Au or Fe₃O₄ in the shell can be well controlled by exploiting the amphiphilic property of the two types of polymers.     

Dispersion of magnetic nanoparticles in a polymorphic liquid crystal

In order to enhance the phase stability of dispersions of magnetic nanoparticles (NPs) in a polymorphic liquid crystal, new ligands have been designed consisting of a terphenyl-based liquid crystalline core. The most stable dispersions were obtained with 7 nm super-paramagnetic Fe₃O₄ NPs decorated with the new ligands in place of 10 nm ferromagnetic CoFe₂O₄ spherical NPs.