Template-directed synthesis employing reversible imine bond formation

The imine bond--formed by the reversible condensation of an amine and an aldehyde--and its applications as a dynamic covalent bond in the template-directed synthesis of molecular compounds, will be the focus of this tutorial review. Template-directed synthesis--or expressed another way, supramolecular assistance to covalent synthesis--relies on the use of reversible noncovalent bonding interactions between molecular building blocks in order to preorganise them into a certain relative geometry as a prelude to covalent bond formation to afford the thermodynamically preferred product. The use of this so-called dynamic covalent chemistry (DCC) in templated reactions allows for an additional amount of reversibility, further eliminating potential kinetic products by allowing the covalent bonds that are formed during the template-directed reaction to be 'proofread for errors', thus making it possible for the reaction to search out its thermodynamic minimum. The marriage of template-directed synthesis with DCC has allowed chemists to construct an increasingly complex collection of compounds from relatively simple precursors. This new paradigm in organic synthesis requires that each individual piece in the molecular self-assembly process is preprogrammed so that the multiple recognition events expressed between the pieces are optimised in a highly cooperative manner in the desired product. It offers an extremely simple way of making complex mechanically interlocked compounds--e.g., catenanes, rotaxanes, suitanes, Borromean rings and Solomon knots--from relatively simple precursors.     

Scalable ambient pressure synthesis of covalent organic frameworks and their colorimetric nanocomposites through dynamic imine exchange reactions

A novel scale-up ambient pressure synthetic strategy for the preparation of imine-based covalent organic frameworks (COFs) was proposed through dynamic imine exchange reaction mechanism.The obtained COFs exhibited good crystallinity and much higher porosity comparable to their solvothermally synthesized counterparts.Moreover,under ambient pressure,the COF nanofibers could readily grow on the surface of polyimide films,and the resulted nanocomposite film showed an interesting colorimetric acid-responsive behavior.     

亚胺类共价有机骨架材料在样品前处理中的应用

亚胺类共价有机骨架(I-COFs)是有机单体根据席夫碱(Schiff-base)反应原理缩合形成的一类新型多孔晶体有机材料.I-COFs具有骨架密度低、比表面积大、孔隙率高、单体种类丰富、孔径尺寸可控、结构可功能化、合成方法多样和物化稳定性好等优点.近年来,I-COFs已成为材料科学领域的研究前沿,并广泛用于气体吸附、...     

Regioselectivity in base-promoted imine formation

Specific base-solvent combinations control orientation in eliminations from N-chloro-2-ethylpyrrolidine to give substantial proportions of previously-unreported 5-ethyl-l-pyrroline.     

Electrochemically driven reversible solid state metal exchange processes in polynuclear copper complexes

The electrochemical characteristics of polynuclear di-copper and tetra-copper complexes of an expanded "Robson-type" macrocyclic ligand are explored by solid state voltammetry in aqueous media. When adhered to a graphite electrode surface in the form of microcrystalline powders and immersed in aqueous buffer solution, these water-insoluble polynuclear copper complexes show well-defined voltammetric reduction and re-oxidation responses. The di-copper metal complexes [Cu₂(H₃L)(OH)][BF₄]₂ and the tetra-copper complexes [Cu₄(L)(OH)][NO₃]₃ with an O₄N₄ octadentate macrocyclic ligand L are shown to exhibit inter-related and proton concentration sensitive solid state voltammetric characteristics. At sufficiently negative potential, copper is extracted from the complexes to form a solid copper deposit and the neutral form of the insoluble free ligand. Upon re-oxidation of the copper deposit, Cu²⁺ undergoes facile re-insertion into the ligand sphere to re-form solid di- and tetra-copper complexes at the electrode surface. The reduction process occurs in two stages, with two Cu²⁺ cations being extracted in each step. The ability of the macrocyclic ligand to efficiently release and accumulate copper is demonstrated. Electronic Publication     

基于葡萄糖和苯硼酸基元之间的可逆共价键构筑多重响应性高分子复合物胶束

通过可逆加成-断裂链转移(RAFT)的聚合方法,合成了分别含有苯硼酸基元和葡萄糖基元的聚(N-异丙基丙烯酰胺)-b-聚(丙烯酰胺基苯硼酸)(PNIPAM-b-PAPBA)和聚(N-异丙基丙烯酰胺)-b-聚(丙烯酰葡萄糖胺)(PNIPAM-b-PAGA)二嵌段聚合物.由于苯硼酸和葡萄糖基元之间在弱碱性条件下(pH9.3)形成硼酸酯共价键,两种二嵌段聚合物的水溶液混合后能自发形成以PAPBA/PAGA络合物为核,PNIPAM为壳层的高分子复合物胶束.由于硼酸酯共价键在pH值和葡萄糖浓度改变时能可逆形成和断裂,以及胶束PNIPAM壳层的温敏性,所制备的基于苯硼酸/葡萄糖可逆共价键的高分子复合物胶束对pH、葡萄糖和温度具有多重响应性.     

Probing selectivity in recognition-mediated dynamic covalent processes

[reaction: see text] Two simple recognition-mediated dynamic Diels-Alder systems are used to probe the role of kinetics and thermodynamics in determining the equilibrium position in exchanging libraries and the time taken to reach that equilibrium. The selectivity expressed by recognition-driven dynamic processes is demonstrated to be less than the free-energy difference between the components as a result of compensatory effects arising from the extent of conversion to products within the library.     

An effective method for the discrimination of motional anisotropy and chemical exchange

Analysis of the ratio of transverse and longitudinal relaxation rates (R2/R1) is an approach commonly used for estimation of overall correlation time and identification of chemical exchange in biological macromolecules. However, this analysis fails to distinguish between chemical exchange and motional anisotropy. We describe a simple method for identifying chemical exchange and motional anisotropy using the product, R1R2. In the slow tumbling regime, the R1R2 product results in a constant value that is independent of overall correlation time and motional anisotropy. This analysis provides a simple method for rapidly estimating and dissociating the effects of motional anisotropy and chemical exchange in NMR heteronuclear spin relaxation data. We demonstrate the utility of the method with 15N relaxation data collected on the proteins E. coli ribonuclease H and the trimeric E. coli membrane associated lipoprotein lpp.     

Interdependence of motional processes in polymers: correlation functions for nmr relaxation

The roles of both anisotropic motion and the interdependence of multiple motions in leading to nonexponential correlation functions for NMR relaxation data are explored. A motional model is developed in which rotational motions of segments of various lengths are controlled by the formation and disappearance of a suitable conformation. Such a model gives correlation functions which can be made, through adjustment of parameters, to be almost identical to correlation functions from other, quite different, models. The ability of NMR relaxation data to identify unique motional models is thus questioned.     

Dependence of metal contact exchange dynamics on electrochemical parameters of electrode processes

Effect of kinetic parameters of electrode processes on the growth dynamics and structural characteristics of the friable metal deposit, which forms via its contact deposition from an aqueous solution, is studied. A model concept is based on the electrochemical processes proceeding at the metal/solution interface. Dependences of the deposition dynamics and deposit characteristics on the exchange currents of depositing and dissolving metals and on the hydrogen exchange currents at the surfaces of both metals are studied.     

Zero-field NMR enhanced by parahydrogen in reversible exchange

We have recently demonstrated that sensitive and chemically specific NMR spectra can be recorded in the absence of a magnetic field using hydrogenative parahydrogen induced polarization (PHIP) (1-3) and detection with an optical atomic magnetometer. Here, we show that non-hydrogenative parahydrogen-induced polarization (4-6) (NH-PHIP) can also dramatically enhance the sensitivity of zero-field NMR. We demonstrate the detection of pyridine, at concentrations as low as 6 mM in a sample volume of 250 μL, with sufficient sensitivity to resolve all identifying spectral features, as supported by numerical simulations. Because the NH-PHIP mechanism is nonreactive, operates in situ, and eliminates the need for a prepolarizing magnet, its combination with optical atomic magnetometry will greatly broaden the analytical capabilities of zero-field and low-field NMR.     

Quinone imine dye formation via photocycloaddition between isocyanates and chloranil

Photochemical [2+2]cycloaddition between electron-donating aryl isocyanates and chloranil was observed in acetonitrile or benzene, and the following elimination of carbon dioxide resulted in the formation of the corresponding quinone imine dyes. This new route for synthesis of quinone imine was investigated by product analyses, laser flash photolyses, and molecular orbital calculation.     

Dielectric study of the slow motional processes in the polymorphic States of anhydrous caffeine

Molecular mobility in crystalline anhydrous caffeine was studied by the dielectric technique of thermally stimulated depolarization currents (TSDC). Two relaxational processes were found, one appearing at approximately -10 degrees C that is ascribed to a reorientational glass transition, and a higher temperature one that probably arises from local molecular motions that are precursors of diffusion and sublimation. The experimental results suggest that both crystalline phases II and I of caffeine, that have distinct crystal structures, are solid rotator phases. Furthermore, this dynamic reorientational disorder shows a reorientational glass transition at the same temperature in phase II and in metastable phase I.     

The influence of constitutional isomerism and change on molecular recognition processes

Three constitutionally isomeric bis(naphthylmethyl)ammonium ions, in which the two naphthyl groups are substituted 1) both at their 1-positions, 2) one at its 1-position and the other at its 2-position, and 3) both at their 2-positions, have been investigated separately in solution for their propensities to undergo spontaneous self-assembly with three different [24]crown-8 derivatives, namely, pyrido[24]crown-8 (P24C8), dipyrido[24]crown-8 (DP24C8) and dibenzo[24]crown-8 (DB24C8), in turn to form [2]pseudorotaxanes. The strengths of the 1:1 complexes depend on the composition of the secondary dialkylammonium ions and on the nature of the crown ether hosts; generally, as far as the guest cation is concerned, the 1/1- and 2/2-isomers form stronger complexes, as indicated by stability constant measurements, than the 1/2-isomer and, as far as the crown ethers are concerned, the more flexible P24C8 is a much more efficient host than either DP24C8 or DB24C8. The rates of formation of the [2]pseudorotaxanes are fast (i.e., taking no more than a few minutes) in solution with the exception of one case, that is, in which the crown ether host is DB24C8 and the guest cation is the 1/1-isomer, when it can take upwards of one month for the complexation-decomplexation equilibrium to be established at room temperature. In all cases, the equilibrium between complexed and uncomplexed species is slow on the NMR timescale, allowing the determination of stability constants to be made readily using the single-point method. X-ray crystallography and molecular modeling have been used to gain insight into ground and transition state interactions, respectively, in some of the [2]pseudorotaxanes. The relative stabilities of the three [2]pseudorotaxanes formed by each guest cation in the presence of the three crown ether hosts were also evaluated in solution by competition experiments that were monitored by (1)H NMR spectroscopy. By and large the results of the competition experiments could be predicted on the basis of the derived stability constants for the individual [2]pseudorotaxanes.     

Comparison of irreversible and reversible cluster formation

Covalent and reversible cluster molecules were synthesized by an A₃B₂ type gelation. Crosslinking of three-arm hydroxyl-terminated star polymers with 2,4-toluenediisocyanate gave branched polymers, while the reversible analogue was made by crosslinking of tertiary amine-terminated star polymers with bis(4-hydroxy-3,5-dinitrophenyl) adipate. Gelation process was followed by static and dynamic light scattering. The extent of reacted groups was measured with UV spectroscopy. Growth of the covalent clusters could be described in terms of percolation scaling laws. The experimental gel point (P_{OH, cr} = 0.70) was shifted significantly from the theoretical predicted gel point (P_{OH, cr} = 0.50), indicating extensive ring formation during the gelation. The reversible endlinking reaction gave no macroscopic gelation, though increase of the cluster dimensions was observed. Ring formation proved to be an important side reaction in both cases; however, the ring formation ability seems to change in a different manner during the course of a gelation.     

Background defining during the imine formation reaction in FT-IR liquid cell

Imine formation is a very important chemical reaction because of its relevance to biological process. Therefore, it is crucial to follow whole reaction process in detail. The current work performed to monitor the whole imination reaction in real time in liquid cell by FT-IR spectroscopy. The complex spectral futures due to solvent, unreacted reagents, acid catalysis and other additives are eliminated by defining a background at the beginning or at any time during the reaction. This procedure also makes it possible to monitor the changes in the concentration of each component in the liquid cell. The consumption of the functional groups of the reagents results in absorbance due to the direct difference spectra while the appearance of functional groups is monitored as percentage transmittance. The concentration changes in the cell arising from the reaction gives the product spectra without having to isolate it from the mixture. It is also possible to see the intermediates appearing and disappearing during the reaction. This report also illustrates a brief application of the technique by time dependence of the peak highs in absorption (ABS) mode.     

Carbon-carbon bond formation from azaallyl and imine couplings about metal-metal bonds

Typical C-C bond-forming processes feature oxidative addition, insertion, and reductive elimination reactions. An alternative strategy toward C-C bond formation involves the generation of transient radicals that can couple at or around one or more metal centers. Generation of transient azaallyl ligands that reductively couple at CH positions possessing radical character is described. Two C-C bonds form, and the redox non-innocence of the resulting pyridine-imines may be critical to formation of a third C-C bond via dinuclear di-imine oxidative coupling. Unique metal-metal bonds are a consequence of the chelation.