Comparing the stability of tribenzo[ b , n , pqr ]perylene and tribenzo[ b , k , pqr ]perylene

Two isomeric benzenoid hydrocarbons – tribenzo[b,n,pqr]perylene and tribenzo[b,k,pqr]perylene played a crucial role in the formulation of the Clar aromatic sextet theory. The basic assumption of this theory is that tribenzo[b,n,pqr]perylene is more stable than tribenzo[b,k,pqr]perylene because the former has five, whereas the latter only four aromatic sextets. We now approach this stability problem from a different direction. By means of a recently developed molecular-orbital-based method it is possible to estimate the energy effects of individual cycles, as well as pairs, triplets, etc. of cycles in polycyclic conjugated molecules. From these energy-effects one can better understand which structural details are responsible for the thermodynamic stability of the underlying molecule. In particular, it is possible to rationalize (in a quantitative manner) the causes of differences in the thermodynamic stability of isomers. Our analysis corroborates the conclusion of Clar theory, but points out a number of hitherto overlooked structure-stability connections. Correspondence: Ivan Gutman, Faculty of Science, University of Kragujevac, P.O. Box 60, 34000 Kragujevac, Serbia.     

Ab initio study of atropisomers of derivatives of 1,8-di-pyridine 9H-fluorene, dibenzo[b,d]furan, 9H-carbazole and dibenzo[b,d]thiophene

Ab initio calculation at HF/6-31G^* and MP2/6-31G^* levels of theory for geometry optimization of some syn- and anti-1,8-di-pyridine 9H-fluorene, dibenzo[b,d]furan, 9H-carbazole and Dibenzo[b,d]thiophene are reported. The rotational barrier energy, heat of formation and Gibbs energy are determined for the conversion of the anti-(syn) to the syn (anti)-isomers at 25 °C in the gas phase. The models are chosen as isomers of 9H-fluorene, dibenzo[b,d]furan, 9H-carbazole and dibenzo[b,d]thiophene as scaffold with pyridine as module. Results obtained show that (at equilibrium) for most of atropisomers the syn- is favored over the anti-isomer. Moreover, the ground state structures show that the modules are not parallel to each other but are tilted away in order to increase separation and there by minimize electrostatic repulsion. In atropisomers of 9H-carbazole the isomers are showing an attraction due to the presence of nitrogen atom. Influence of the position of nitrogen atom on the magnitude of the rotational barriers in these atropisomers is also studied.     

The synthesis and X-Ray crystallographic analysis of a stable norbornadienone: 17-Oxo-7,16-methano-7,16-diphenylcyclopenta[d,e]tribenzo[a,h,j]anthracene

The reaction of 4,5-didehydroacenaphthene with phencyclone yields the title compound, a stable dibenzo-fused norbornadienone (8). The X-ray structure of8 is presented and compared with the structure predicted from a MM3, PM3, and a MMX calculation. Thermal decomposition of 8 produces, 7,16-diphenylcyclopenta[d,e]tribenzo[a,h,j]anthracene (9), a hydrocarbon that is computed to have a significantly twisted polycyclic aromatic skeleton with 19 kcal/mole of strain energy.     

A Facile and Efficient Synthesis of Novel 1,2,4-Triazolo[5,1- b ]quinazolin-9-one Derivatives

 A facile and efficient synthesis of a series of novel 1,2,4-triazolo[5,1-b]quinazolines is described. 2,3-Diaryl-2,3-dihydro-1H-1,2,4-triazolo[5,1-b]quinazolin-9-ones were obtained by reaction of 3-amino-2-arylamino-3H-quinazolin-4-ones with aromatic aldehydes as well as by ring closure of the corresponding anils. Treatment of 3-amino-2-arylamino-3H-quinazolin-4-ones with aromatic carboxylic acids afforded 2,3-diaryl-3H-1,2,4-triazolo[5,1-b]quinazolin-9-ones which could also be synthesized by dehydrogenation of the corresponding dihydro derivatives. Reaction of 3-amino-2-arylamino-3H-quinazolin-4-ones with diethyl malonate and acetylacetone gave 3-aryl-3,9-dihydro-9-oxo-1,2,4-triazolo[5,1-b]quinazolin-2-yl-acetic acid ethyl ester and 3-aryl-2-methyl-3H-1,2,4-triazolo[5,1-b]quinazolin-9-ones, respectively. The latter compounds were also prepared via reaction with acetic anhydride, whereas acetylation with acetic anhydride in the presence of pyridine afforded the acetyl derivatives.     

Synthesis of (3RS)- and (3SR)-acetoxy-(3aRS,8bSR)-N-acetyl-5-methoxy-1,2,3,3a,4,8b-hexahydrocyclopenta[b]indoles

Stereoisomeric 3-acetoxy-5-methoxy-1,2,3,3a,4,8b-hexahydrocyclopenta[b]indoles differing by the configuration of the C³ atom were synthesized. The reaction of N-acetyl-6-(cyclopent-2-en-1-yl)-2-methoxyaniline with 50% hydrogen peroxide in the presence of Na₂WO₄-H₃PO₄ in AcOH gave (3RS,3aRS,8bSR)-N-acetyl-3-hydroxy-5-methoxy-1,2,3,3a,4,8b-hexahydrocyclopenta[b]indole which was converted into the corresponding 3-O-acetyl derivative by treatment with acetic anhydride in pyridine. N-Acetyl-6-(cyclopent-2-en-1-yl)-2-methoxyaniline reacted with iodine in methylene chloride in the presence of NaHCO₃ to produce (3SR,3aRS,8bSR)-3-acetoxy-5-methoxy-1,2,3,3a,4,8b-hexahydrocyclopenta[b]indole which was subjected to acetylation at the nitrogen atom by reaction with acetic anhydride. The structure of (3RS,3aRS,8bSR)-N-acetyl-3-hydroxy-5-methyl-1,2,3,3a,4,8b-hexahydrocyclopenta[b]indole was proved by X-ray analysis. Original Russian Text ? N.A. Likhacheva, A.A. Korlyukov, R.R. Gataullin, 2009, published in Zhurnal Organicheskoi Khimii, 2009, Vol. 45, No. 3, pp. 406–409.     

Reactions of N - and C -alkenylanilines: VIII. Synthesis of functionalized cycloalka[ b ]indoles from o -(cycloalk-2-en-1-yl)anilines

N-Acyl-2-(cyclohex-2-en-1-yl)anilines react with molecular iodine to give the corresponding N-acyl-1-iodo-1,2,3,4,4a,9a-hexahydrocarbazoles which undergo isomerization into 1-R-2a,3,4,5,5a,10a-hexahydro[1,3]oxazolo[5,4,3-j,k]carbazol-10-ium iodides; no isomerization occurs with N-acetyl-3-iodo1,2,3,3a,4,8b-hexahydrocyclopenta[b]indole. The reaction of N-p-tolylsulfonyl-3,4,4a,9a-tetrahydrocarbazoles with hydrogen peroxide leads to the formation of a single 1,2-epoxy derivative with trans orientation of the nitrogen-and oxygen-containing rings. N-p-Tolylsulfonyl-1,3a,4,8b-tetrahydrocyclopenta[b]indoles give rise to the corresponding 2,3-epoxy derivatives with both trans and cis orientation of the dihydropyrrole and oxirane fragments. The resulting epoxides undergo trans-opening with formation of N-p-tolylsulfonyl-1-hydroxy-2-methoxy-1,2,3,4,4a,9a-hexahydrocarbazoles and N-p-tolylsulfonyl-3-hydroxy-2-methoxy-1,2,3,3a,4,8b-hexahydrocyclopenta[b]indoles on heating in methanol in the presence of KU-2 cation exchanger. Mutual orientation of the oxirane and nitrogen-containing rings in the epoxides derived from cyclopenta[b]-indoles was proved by X-ray analysis. Original Russian Text ? R.R. Gataullin, N.A. Likhacheva, K.Yu. Suponitskii, I.B. Abdrakhmanov, 2007, published in Zhurnal Organicheskoi Khimii, 2007, Vol. 43, No. 9, pp. 1316–1326. For communication VII, see [1].     

First identification of benzo[cd]phenanthro[1,2,3-lm]perylene by high-pressure liquid chromatography with ultraviolet-visible spectroscopy and mass spectrometry

Benzo[cd]phenanthro[1,2,3-lm]perylene has been identified as a product of supercritical 1-methylnaphthalene pyrolysis from an experiment performed at 585 °C, 110 atm, and 140 s in a supercritical fluid flow reactor. The identification of benzo[cd]phenanthro[1,2,3-lm]perylene is based on the product's mass spectrum, HPLC elution time, and UV absorbance spectrum. The mass spectrum of the identified 1-methylnaphthalene pyrolysis product, called component I here, reveals a molecular weight of 426, corresponding to a C₃₄H₁₈ polycyclic aromatic hydrocarbon (PAH). The extremely long HPLC elution time, 20–48 min longer than those of the four other C₃₄H₁₈ PAH components in this product mixture, indicates that component I has a planar structure with a high length-to-breadth ratio. Annellation theory is used to interpret and compare the UV spectrum of component I with those of the C₃₀H₁₆ benzo[cd]naphtho[1,2,3-lm]perylene and the C₃₆H₁₈ teropyrene, structures with one ring less and one ring more, respectively, than that of component I. This analysis of component I's UV spectrum, in conjunction with its mass spectrum and HPLC elution behavior, all lead to the identification of component I as the nine-ring PAH benzo[cd]phenanthro[1,2,3-lm] perylene, a molecule whose existence has never before been documented.     

Identification of a new C28H14 polycyclic aromatic hydrocarbon as a product of supercritical fuel pyrolysis: Tribenzo[cd,ghi,lm]perylene

Tribenzo[cd,ghi,lm]perylene has been identified as a product of the supercritical pyrolysis of both toluene and Fischer-Tropsch synthetic jet fuel. This identification is based on HPLC/UV/MS data, which show that compound I, eluting immediately after five other C28H14 isomers, is also a C28H14 PAH. The UV spectrum of compound I has features of a benzenoid PAH, of which there are only eight C28H14 isomers. Four of these isomers--benzo[a]coronene, phenanthro[5,4,3,2-efghi]perylene, benzo[cd]naphtho[3,2,1,8-pqra]perylene, and benzo[pqr]naphtho[8,1,2-bcd]perylene--have already been identified as supercritical pyrolysis products by matching their UV spectra with those of respective reference standards. A fifth C28H14 PAH--benzo[ghi]naphtho[8,1,2-bcd]perylene, which does not have a reference standard--has also been recently identified through MS and UV data, use of annellation theory to predict UV spectral characteristics, and length-to-breadth ratio/retention time data. Of the remaining three isomers, bisanthene (IUPAC name phenanthro[1,10,9,8-opqra]perylene) has been determined not to be present in our product mixture, as its UV spectrum does not match that of any of our product PAH. Using annellation theory, we predict the UV spectral characteristics of the two remaining C28H14 benzenoid isomers, for which there are no reference standards (tribenzo[cd,ghi,lm]perylene and naphthaceno[3,4,5,6,7-defghij]naphthacene). Results from this analysis show that the predicted UV spectral features of tribenzo[cd,ghi,lm]perylene match those of compound I--and that those of naphthaceno[3,4,5,6,7-defghij]naphthacene are inconsistent with those of compound I. The length-to-breadth ratio of tribenzo[cd,ghi,lm]perylene also agrees with compound I's HPLC elution behavior. This is the first time that tribenzo[cd,ghi,lm]perylene (IUPAC name phenanthro[2,1,10,9,8,7-pqrstuv]pentaphene) has been identified as a product of fuel pyrolysis or combustion.     

On the Synthesis of Pyrrolobenzo[b]thieno[1,4]diazepines

2-Amino-4,5,6,7-tetrahydrobenzo[b]thiophene-3-carbonitrile was converted into the corresponding 2-(pyrrol-1-yl) derivative, followed by reduction of the latter compound into the corresponding amine. This amine and its acyl, aroyl, and arylidene derivatives were used as synthons in the synthesis of several title compounds.     

Solid-phase synthesis of 2-alkylidene-6-alkyl-imidazo[2,1-b]thiazole-3,5[2H,6H]-dione derivatives

A solid-phase synthesis of 2-alkylidene-6-alkyl-imidazo[2,1-b]thiazole-3,5[2H,6H]-dione derivatives is reported. The desired products were obtained in good purities and yields.     

Design, synthesis, and antimicrobial activity of fused triheterocyclic nitrogen systems involving tetrazolo[1,5-b][1,2,4]triazines [1]

Dehydrogenative cyclization of the 6-substituted 7-arylidenehydrazinotetrazolo[1,5-b][1,2,4]triazines derived from 6-methyl and 6-phenyl derivatives of 7-hydrazinotetrazolo[1,5-b][1,2,4]triazines and aromatic aldehydes gave the corresponding 6-substituted 9-aryl-[1,2,4]triazolo[4,3-d]tetrazolo-[1,5-b][1,2,4]triazines. The latter compounds were also obtained by an alternative route involving dehydrative cyclization of 6-methyl and 6-phenyl derivatives of 7-chlorotetrazolo[1,5-b][1,2,4]triazines with aromatic hydrazides through the isolable aroylhydrazino intermediates. Also, the triazolotetrazolotriazine rings were accomplished by one-pot cyclization of cyclic amidrazones with aromatic acid chlorides. The ditetrazolo[1,5-b:1′,5′-d][1,2,4]triazine systems were synthesized by cyclization of the former cyclic amidrazones with nitrous acid, or cyclic imidoyl chlorides with sodium azide. The bis-triazolotetrazolotriazine derivatives were synthesized by cyclization of two equivalents of each cyclic imidoyl chloride with acid dihydrazides through the isolable bis-hydrazide products. The antimicrobial activity of representative compounds was studied.     

Reaction of 6-methoxybenzo[b]furan-3(2H)-one and benzo[b]thiophen-3(2H)-one with 2-aryl-1,1-dicyanoethylenes as a convenient synthetic route to substituted 2-amino-4-aryl-1,3-dicyano-7-methoxydibenzo[b,d]furans and 2-amino-4-aryl-3-cyano-4H-benzothieno[3,2-b]pyrans

The reactions of 6-methoxybenzo[b]furan-3(2H)-one with 2-aryl-1,1-dicyanoethylenes and malononitrile or with aromatic aldehyde and two moles of malononitrile afford 2-amino-4-aryl-1,3-dicyano-7-methoxydibenzo[b,d]furans. The reactions of benzo[b]thiophen-3(2H)-one with 2-aryl-1,1-dicyanoethylenes or with aromatic aldehyde and one mole of malononitrile produce 2-amino-4-aryl-3-cyano-4H-benzothieno[3,2-b]pyrans.     

New Benzo[ b ]xanthones from Diels-Alder Reactions of Chromone-3-carboxaldehydes with ortho -Benzoquinodimethanes

 New benzo[b]xanthone derivatives, having substituents in the A and D rings, were prepared from cycloaddition reactions of chromone-3-carboxaldehydes with ortho-benzoquinodimethanes, generated in situ from 1,3-dihydrobenzo[c]thiophene 2,2-dioxide, followed by oxidation of the obtained diastereomeric adducts. The structure of all compounds was fully established by 1D and 2D NMR, MS, and elemental analysis. The stereochemistry of the obtained diastereomeric cycloadducts was established by NOESY experiments.     

Simple synthesis of quinolines and dibenzo[b,f][1,5]diazocines under microwave irradiation

Quinolines 3a–f, 5a–f, and dibenzo[b,f][1,5]diazocines 4, 6 were synthesized in the presence of 0.5 equiv. of diphenyl phosphate (DPP) under microwave irradiation. The obtained yield of 6,12-diphenyl-dibenzo[b,f][1,5]diazocine 4 was higher when using anhydrous DPP than when using HCl, H₃PO₄, and CH₃COOH.     

Partially Hydrogenated Aromatic Substituted Tetrazolo[1,5-a]pyrimidines

By treating 5-aminotetrazole with aromatic ,-unsaturated ketones or with Mannich base hydrochlorides there have been synthesized aromatic substituted 4,7-dihydrotetrazolo[1,5-a]-pyrimidines. They can be reduced to the corresponding 4,5,6,7-tetrahydro derivatives by the action of NaBH₄. The high thermodynamic stability of the 4,7-dihydrotetrazolo[1,5-a]pyrimidines when compared with the 4,5-dihydro isomers has been revealed. Reaction of 5-aminotetrazole both with cyclohexanone as well as with 2-cyclohexylidenecyclohexanone leads to formation of 9,9-pentamethylene-4,5,6,7,8,9-hexahydrotetrazolo[5,1-b]quinazoline, the structure of which was demonstrated using X-ray crystallography.     

杯芳烃多齿水杨醛亚胺衍生物的合成

以对叔丁基杯[n]芳烃1a～1b (n＝6, 8)为原料, 经过三步反应, 以较高产率合成了一系列含多个水杨醛亚胺端基的西佛碱衍生物5a～5f. 对叔丁基杯[n]芳烃用溴乙酸乙酯进行烃基化反应, 生成杯芳烃氧代乙酸乙酯2a～2b, 后者与过量脂肪族二胺NH₂(CH₂)_mNH₂ (m＝2, 4, 6)反应, 生成含有游离氨基的杯芳烃酰胺衍生物4a～4f, 再与水杨醛在乙醇中反应生成目标产物席夫碱衍生物.     

One-pot synthesis of chromeno[2,3-b]isoindolo[1,2-e]pyrrole-12,13-dione derivatives by sequential reaction of ninhydrin, 2-aminochromen-4-ones and arylamines

Stirring an equimolar mixture of ninhydrin 1 and 2-aminochromen-4-ones 2 in CH₃COOH at room temperature produced 6a,11a-dihydroxy-6H-chromeno[2,3-b]indeno[2,1-d]pyrrole-11,12(6aH,11aH)-diones 3, which on heating with aromatic amines 6 in acetic acid produced 11b-hydroxy-7-N-arylimino-6H-chromeno[2,3-b]isoindolo[1,2-e]pyrrole-12,13(11bH)-diones 7.     

Dibenzo[a,f]perylene Bisimide: Effects of Introducing Two Fused Rings

Perylene bisimides (PBIs) are fascinating dyes with various potential applications. To study the effects of introducing a dibenzo‐fused structure to the perylene moiety, π‐extended PBI derivatives with a dibenzo‐fused structure at both of the a and f bonds were synthesized. The twisted structure was characterized by X‐ray crystal structure analysis. In the cyclic voltammograms, the dibenzo[a,f]‐fused PBI showed a reversible oxidation wave at much less positive potential, relative to a dibenzo[a,o]‐fused PBI derivative. These data indicated that two ring fusions at both sides of a naphthalene moiety, which construct a tetracene core, effectively raise the HOMO level compared to fusion of one ring at each naphthalene moiety (two anthracene cores). The dibenzo[a,f]‐fused PBI derivative showed an absorption band at 735 nm with a shoulder band reaching 900 nm.     

Pyrano[4,3-d]pyrimidinium salts 3. Reactions of 1,3-dimethyl-2,4-dioxo-1H,3H-pyrano[4,3-d]pyrimidinium salts with azomethines

Reactions of 1,3-dimethyl-2,4-dioxo-1H,3H-pyrano[4,3-d]pyrimidinium salts with azomethines have been studied. The reactions lead to 1,3-dimethyl-2,4-dioxo-1H,3H-pyrido-[4,3-d]pyrimidinium salts and aromatic aldehydes.     

K-region oxides and imines of benzo[b]phenanthro[2,3-d]thiophene and benzo[b]phenanthro[3,2-d]thiophene

The syntheses of the K-oxides and K-imine derivatives of benzo[b]phenanthro[2,3-d]thiophene and benzo-[b]phenanthro[3,2-d]thiophene are described. The parent hydrocarbons 1 and 2 were oxidized with osmium tetroxide and sodium metaperiodate, and the dialdehydes 12 and 18 so formed, cyclized to the corresponding epoxides 1a,12b-dihydrobenz[b]oxireno[9,10]phenanthro[2,3-d]thiophene ( 7 ) and 1a,12b-dihydrobenz-[b]oxireno[9,10]phenanthro[3,2-d]thiophene ( 13 ). Reaction of the oxiranes with sodium azide gave mixtures of azido-alcohols that, in turn, were transformed to the thiaarene imines 1a,12b-dihydro-1H-benz[b]azirino-[9,10]phenanthro[2,3-d]thiophene ( 8 ) and 1a,12b-dihydro-1H-benz[b]azirino[9,10]phenanthro[3,2-d]thiophene ( 14 ), respectively, with the aid of tri-n-butylphosphine.