TS-1分子筛对固定床中苯酚羟基化反应的催化性能

 制备了用于固定床反应器的负载型TS－1分子筛催化剂,并以苯酚羟基化为探针反应,研究了载体、钛含量和预处理剂等对负载型TS－1分子筛催化性能的影响,考察了固定床反应器中苯酚羟基化反应的工艺条件．结果表明,酸性较强的载体会加剧H2O2的分解,导致苯酚的转化率和H2O2的有效利用率下降;在所研究的ZSM－5,TiO2,Al2O3,ZrO2,SiO2和硅藻土载体中,硅藻土具有最好的催化性能;催化剂的活性与骨架钛含量有关;用HNO3,KAc,NaAc,NH4Ac和NH4Cl处理过的催化剂,活性和选择性得到提高,而用NH3·H2O,Na2CO3和Na3PO4等碱性物质处理后,催化剂的活性则下降;溶剂、反应温度、原料空速和苯酚／H2O2摩尔比对苯酚羟基化反应有很大影响．以丙酮为溶剂,在苯酚／H2O2摩尔比为3,反应温度为84℃,WHSV为8．46h－1的反应条件下,苯酚转化率、H2O2转化率、苯二酚选择性以及H2O2的有效利用率可分别达到27．7％,94．8％,97．7％和75．1％．     

五元水滑石的微波晶化法合成及催化苯酚羟基化反应

采用微波晶化法合成了二元CuAl、三元CuAlNi、四元CuAlNiFe、五元CuAlNiFeCo水滑石类化合物,并将其用于催化苯酚羟基化制苯二酚,结果表明五元配合物的催化性能最好。Cu4NiCoFeAlCO3的XRD和IR表征表明其晶体结构为水滑石结构;用TEM观察了五元配合物的晶体形貌。五元水滑石催化苯酚羟基化反应结果表明,催化剂活性随其铜含量的增加而增大;双氧水的有效利用率随苯酚／双氧水摩尔比的升高而增大。以Cu4NiCoFeAlCO3为催化剂时,在苯酚／催化剂质量比为10、10mL水作溶剂、0．5g苯酚、苯酚／双氧水摩尔比为1：2条件下,苯酚转化率为62．96％,苯二酚的选择性达到97．63％。     

苯酚直接羟基化制备苯二酚反应体系中催化剂的设计与性能

邻苯二酚和对苯二酚是重要的工业原料。苯酚一步羟基反应合成苯二酚的方法原子利用率高且节能高效,符合可持续发展的理念。以H_2O_2为氧化剂氧化苯酚合成苯二酚的工艺,流程简单、反应条件温和且绿色环保,成为催化合成领域的研究热点。在该反应中,苯酚的转化率和产物苯二酚的收率高低取决于催化剂的活性。本文综述了近几年在苯酚羟基化制备苯二酚反应中催化剂的研究进展。按照反应体系的不同,催化剂可被分为热催化反应体系中的催化剂和光催化反应体系中的催化剂。催化剂的催化性能主要以苯酚转化率、苯二酚的选择性和稳定性等方面作为评价指标。本文重点介绍了以H_2O_2为氧化剂的液相非均相催化体系中含金属催化剂的研究现状,并在最后对催化剂在苯酚一步羟基化制备苯二酚的反应体系中的制备与应用作了展望。     

负载型铁基复合氧化物催化苯酚羟基化的研究

在温和条件下对铁基复合氧化物催化苯酚和过氧化氢的羟基化反应进行了研究.结果表明,活性组分、载体以及催化剂/苯酚(质量比)、过氧化氢/苯酚(摩尔比)、反应温度和反应时间等对苯酚羟基化反应具有重要影响.Fe-A催化剂的活性组分形成了α-Fe2O3和尖晶石结构;Fe-B催化剂活性组分以非晶态分布在催化剂上,高度弥散,具有更好的催化性能.溶剂的加入,有助于苯酚和过氧化氢的混合,水是理想的羟基化反应溶剂,可以实现苯酚和过氧化氢水溶液的互溶,有利于·OH的生成.以Fe-B作催化剂,水为溶剂,反应温度65℃,反应时间1h,催化剂/苯酚(质量比)=0.02,水/苯酚(体积比)=2.0,过氧化氢/苯酚(摩尔比)=0.3,苯酚转化率21.6%,苯二酚选择性86.5%.     

催化还原胺类衍生物N．单烷基化反应-锅法合成4，6-二（异丙基氨基）-1，3-苯二酚

以2-氯-4,6-二硝基-1,3-苯二酚为原料,丙酮为烷基源,氢气为还原剂,研究了在10％Pd／C催化剂上-锅法合成N-单烷基氨基苯酚化合物4,6-二（异丙基氨基）-1,3-苯二酚的反应工艺．考察了反应条件如醋酸量、丙酮浓度、氢气压力、催化剂量和反应时间对反应的影响,开发出-条高收率、高选择性制备N-单烷基氨基苯酚化合物的合成路线．     

磁性纳米固体碱催化剂MgAI-OH-LDHs／NiFe2O4的合成、表征与性能研究

提出用镁铝水滑石包覆镍铁尖晶石，制备磁性纳米固体碱催化剂MgAl-OH-LDHs／NiFe2O4．用XRD，IR，TG-DTA，BET，XPS，VSM和TEM等技术及丙酮缩合反应表征了催化剂的结构和性能．结果表明该催化剂具有以NiFe2O4为磁核，以MgAl-OH-LDHs为BrФnsted碱催化活性相，通过Mg-O-Fe(Ni)和／或Al-O-Fe(Ni)连接于磁核上的包覆结构，给出了该催化剂的结构模型．该催化剂用于丙酮缩合反应，273K双丙酮醇转化率略高于MgAl-OH-LDHs，然而经外加磁场回收所得回收率大幅度提高，再次用于该反应仍保持较高的催化活性．     

H3PW6Mo6O40/SiO2催化合成7-羟基-4-甲基香豆素

采用溶胶-凝胶法制备了二氧化硅负载磷钨钼杂多酸催化剂H3PW6Mo6O40/SiO2,该催化剂制备的适宜条件是:m(H3PW6Mo6O40)∶m(SiO2)=40%,煅烧温度150℃,活化时间3 h。以二氧化硅负载磷钨钼酸为催化剂,在无溶剂条件下由间苯二酚和乙酰乙酸乙酯为原料进行Pechmann反应合成7-羟基-4-甲基香豆素。考察了反应物间苯二酚与乙酰乙酸乙酯摩尔比,催化剂用量,反应温度,反应时间等因素对收率的影响,并对反应条件进行优化。结果表明,在间苯二酚与乙酰乙酸乙酯的摩尔比为1∶1.5(其中间苯二酚为0.1mol),反应时间为16 h,H3PW6Mo6O40/SiO2的用量为1.3 g,在油浴加热120℃左右的优化条件下,7-羟基-4-甲基香豆素的收率可达86.1%。     

多元酚的氰乙基化和乙氧羰乙基化Ⅰ.

在甲醇钠存在下,间苯二酚、甲基或硝基取代的间苯二酚和1,3,5-苯三酚的C-氰乙基化反应可在2-,4-和6-位上进行.然后还可以发生O-氰乙基化反应,生成多氰乙基化产物. 2-硝基-1,3-苯二酚与丙烯酸乙酯反应,也是在4-,6-位上导入CH_2CH_2CO_2C_2H_5.间苯二酚和2-甲基-1,3-苯二酚的乙氧羰乙基化产物在蒸馏时失去乙醇,生成相应的内酯.     

乙烷部分氧化制C2氧化物用Fe-A1-P-O催化剂的研究 Ⅱ．Fe-A1-P-O催化剂的吸附及催化性能

用化学吸附-IR，化学吸附-TPD和微反技术研究了超细Fe-Al-P-O催化剂的化学吸附性能及对乙烷部分氧化反应的催化性能．结果表明，乙烷能够以-CH3中的H原子吸附于催化剂表面P=O键的端氧上形成分子吸附态，并且随着吸附温度的升高，对乙烷的吸附强度逐渐增大；乙烯则主要是以C=C双键吸附在催化剂的Lewis酸位：Fe3 上．乙烷部分氧化反应的主要产物为乙烯和COx，但在反应物中引入氢的条件下，乙烷部分氧化反应的性能大为改善，并可生成乙醇和乙醛等含氧化合物．     

用H2O2氧化苯乙烯合成苯甲酸

摘要：以30％H2O2做为氧化剂,钨酸钠与含O双齿有机配体(草酸)形成的络合物为催化剂,在无有机溶剂、无相转移剂的条件下,研究了苯乙烯氧化制苯甲酸的反应。研究结果表明,最佳反应条件为：苯乙烯100．0mmol,n(钨酸钠)：n(草酸)：n(苯乙烯)：n(30％H2O2)=2．0：3．2：100．0：440．0,于92℃反应24h,苯甲酸收率98．6％。用GC—MS跟踪了氧化过程中4种主要物质苯乙烯、1-苯基邻二醇、羟基苯乙酮及苯甲酸含量随反应时间的变化关系,提出了其主要氧化机理为苯乙烯经过环氧化反应、水解生成生成1-苯基邻二醇,1-苯基邻二醇再氧化为羟基苯乙酮、最后氧化为苯甲酸。     

HEPT类化合物的QSAR研究

为定量结构／活性相关性研究提取了量子化学参数,拓扑指数Am,分子连接性指数^mxt及疏水性常数,同时应用正交变换和最佳变量子集算法（Leaps-and-Bonds)进行了变量压缩和选择,进而实施了多元回归分析,并由此结果进行了HEPT类化合物（1－[(2-hydroxyethoxy)methyl]-6-(phenylthio)-thymine derivatives)的结构／活性关系的理论解释,进行了人工神经网络法对于该类化合物的活性预测,其结构明显好于多元回归法。     

From the Micro- to the Macro-: Managing the Conservation of the Warship,Vasa

Sweden's famous warship, Vasa, sank on her maiden voyage in August 1628, and remained on the bottom of Stockholm harbour for 333 years. Raised in 1961, she became the first large-scale wooden object to be treated with polyethylene glycol (PEG). In the summer of 2000 a number of acidic salt precipitations were noticed on the surface of the ship and on wooden artefacts in the storerooms. An international research project has been established to look into the causes of this problem and suggest possible re-treatments. Meanwhile projects are underway to monitor movements in the ship, to build a better support system, and to replace the thousands of iron bolts holding the structure together, while a sophisticated new climate system has recently been installed in the museum.     

液滴荧光传感与计算机联用技术在微量分析中的应用

通过在LS55型荧光-磷光-发光分光光度计上加装液滴产生及调节附件,采用计算机采集与分析处理数据,成功地研制了双通道液滴光化学传感装置.利用葡聚糖凝胶对复合维生素B中不同组分的选择性吸附来达到分离与同时检测的目的,并将其用于复合维生素B药片的分析,取得了满意的结果.     

On the scaling of the interface energy of the liquid clusters in the disordered nanoporous medium

Similarity of the extrusion curves of non-wetting liquid in a nanoporous medium with different initial fill volume fractions is observed experimentally. The similarity can be explained by the scaling of the interface energy and the self-similarity of the infinite percolation cluster of fluid-filled pores. Understanding the physical processes leading to the observed phenomena is a foundation for the development of high-performance devices for damping and energy storage on the basis of such heterogeneous systems.     

Using of the Agglomeration-in-liquid for the Technology of the Fine Materials

The content of the fine and ultrafine particles in the raw material results in difficulty of the separation, the loss of the valuable components and ecological contamination. Secondary using of the fine particles is impossible without their granulation. This problem has been solved by the agglomeration-in-liquid method.An agglomeration-in-liquid method is a process to produce agglomerates in a liquid phase from solid particles suspended in the liquid. The surface of solid particles and the binding liquid must be of identical polarity, but the continuous phase must be of the opposite polarity. The water solutions of the surfactant are the binding liquids or the organic liquids.     

Copper-containing dendromesogens: the influence of the metal on the mesomorphism

The synthesis and liquid crystalline behaviour of the first and second generations of a dendrimeric structure based on poly(propyleneimine)(DAB-dendr(NH₂)_x) are reported. 4-(4-n-Alkoxybenzoyloxy)salicylaldehydes are used as mesogenic moieties attached at the peripheral amino groups of the dendrimers giving rise to dendromesogens with four and eight mesogenic branches. From these dendromesogens, considered as organic ligands, were prepared six metal-containing dendrimers which incorporate two or four copper atoms in their structures. All the dendrimeric ligands and three of the metal-containing dendrimers exhibit liquid crystalline properties which were studied by optical microscopy, DSC, X-ray diffraction and EPR spectroscopy.     

光亮剂对银电沉积行为的影响

用电势阶跃法和旋转圆盘电极法 (RDE)以及SEM和XRD测试手段 ,初步研究了光亮剂对氰化体系中银电沉积行为的影响 .研究表明 ,光亮剂的加入并未导致银电沉积成核机理的改变 ,但显著增强了镀液的微观平整效应 ,并且所得镀层的表观光滑程度明显改善 .XRD测试亦同时表明光亮剂的加入并未改变镀层的择优取向     

On the dependence of the critical supersaturation on the initial undersaturation in the reverse Wilson chamber

The dependence of the critical supersaturation on the degree of the initial undersaturation has been analyzed in detail.This dependence is explained by means of the Richarch-Powell equation, taking into account the dependence of the -ratio upon the partial pressures of the inert gas and the liquid under investigation.     

Behavior of the Surface Tension and the Viscosity in the Eutecticregion of the Liquid Feb alloy

Abstract

Thermodynamic and transport properties of pure liquid metals show interesting correlations near the melting temperature. This is well known for the case of the surface tension σ and the shear viscosity η In this paper we investigate the possible extension of these correlations to binary alloys, taking the FeB alloy as a case study. Based on literature data we analyze the variation of σ and η as a function of temperature and concentration in a deep eutectic region of the phase diagram of this alloy, as well as the possible correlations between those two quantities. Substantial differences with respect to the behavior in pure metals are found.