Multi-component hybrid inorganic–organic–inorganic particles with various metal oxide outer shells

Non-agglomerated hybrid particles of 200 nm diameter with an outer metal oxide shell were prepared by reacting the COOH groups of poly((S)-N-dicarbazolyl-lysine)-covered silica particles with metal alkoxides, such as titanium, zirconium and aluminum alkoxides, followed by sol–gel processing. With tetraethoxysilane (Si(OEt)₄), the silica particle core was growing rather than forming an external metal oxide shell, as observed for the other tested metal alkoxides.     

Annealing Temperature Dependence of the Size of C60 Clusters in C60-Doped Silicon Oxide Films

C₆₀-doped silicon oxide thin films were prepared by spin-coating a viscous solution formed upon soaking at 40°C an acidic toluene/ethanol solution of C₆₀, phenyltriethoxysilane, and tetraethoxysilane with a C₆₀–to–Si molar ratio of 2.5 × 10^–3. The films were submitted to annealing at 300–500°C in Ar to investigate variation in the size of C₆₀ clusters embedded in the films by photoluminescence spectroscopy. The film before annealing was found to contain the clusters consisting of ca. 60 C₆₀ molecules, suggesting that C₆₀ is present well-dispersed in the film. The molecules in the film aggregated to increase the size with increasing annealing temperature, indicating that the molecules diffuse easily in the film upon heating and therefore the size of the clusters is controllable with the annealing temperature.     

Synthesis and characterization of new silica–titania mixed oxide in the presence of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide by sol–gel technique

Silica–titania mixed oxide were prepared by sol–gel method from tetraethylorthosilicate and titanium (IV) isopropoxide as precursors in the presence of room temperature ionic liquid (RTIL), 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide [C₄MIm][NTf₂]. The effects of [C₄MIm][NTf₂] on the structural and textural characteristics of silica–titania matrix are investigated in this paper. The materials obtained were well characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis X-ray powder diffraction (XRPD), field emission scanning electron microscope (FESEM) and N₂ adsorption–desorption analysis. It is believed that the [C₄MIm][NTf₂] plays an important role as a template and the high surface area of the samples is thought to mainly attribute to the formation of microporous in the reaction. The synthesized materials showed the presence of C–N groups in the FTIR spectrum which indicates the presence of RTIL in the silica–titania matrix. XRPD, FESEM and N₂ adsorption–desorption analysis results indicated that the composite materials possessed good microporous character. The subsequent material displayed average pore diameter of 1.70–2.12 nm, pore volume of 0.08–0.19 cm³/g and BET surface area of 191–386 m²/g. Increasing the content of RTIL resulted in an increase of the average pore diameter of the silica–titania gel.     

Analyzing the adsorption of blood plasma components by means of fullerene-containing silica gels and NMR spectroscopy in solids

The results from studying the adsorption of blood plasma components (e.g., protein, triglycerides, cholesterol, and lipoproteins of low and high density) using silica gels modified with fullerene molecules (in the form of C₆₀ or the hydroxylated form of C₆₀(OH) _x ) and subjected to hydration (or, alternatively, dehydration) are presented. The conditions for preparing adsorbents that allow us to control the adsorption capacity of silica gel and the selectivity of adsorption toward the components of blood plasma, are revealed. The nature and strength of the interactions of the introduced components (fullerene molecules and water) with functional groups on the silica surface are studied by means of solid state NMR spectroscopy (NMR-SS). Conclusions regarding the nature of the centers that control adsorption are drawn on the basis of NMR-SS spectra in combination with direct measurements of adsorption. The interaction of the oxygen of the hydroxyl group of silica gel with fullerene, leading to the formation of electron-donor complexes of C₆₀-H, C₆₀-OH, or C₆₀-OSi type, is demonstrated by the observed changes in the NMR-SS spectra of silica gels in the presence of fullerene.     

Membranes for gas separation based on poly(1-trimethylsilyl-1-propyne)–silica nanocomposites

Nanocomposite membranes based on poly(1-trimethylsilyl-1-propyne) (PTMSP) and silica were synthesized by sol–gel copolymerization of tetraethoxysilane (TEOS) with different organoalkoxysilanes in tetrahydrofuran solutions of PTMSP. The influence of the synthesis parameters (type and concentration of organoalkoxysilanes, temperature and time) on the silica conversion and the gas permeation performance of PTMSP–silica nanocomposite membranes was investigated and discussed in this paper. The nanocomposite membranes were characterized by single and mixed gas permeation, thermogravimetric analysis and scanning electron microscopy. The butane permeability and the butane/methane selectivity increased simultaneously when high silica conversion was obtained and the size of particle was in the range 20–40 nm. For the sake of comparison, nanocomposite membranes based on PTMSP were also prepared by dispersing silica particles with different functional groups into the PTMSP casting solution. The addition of fillers to the polymer matrix can be performed up to a higher content of silica (30% silica-filled PTMSP in contrast to 6 wt.% for the in situ-generated silica). In this case, the simultaneous increase in butane permeability and butane/methane selectivity was significantly higher when compared to the nanocomposite membranes prepared by sol–gel process. The addition of fillers with 50% of surface modification with hydrophobic groups (Si–C₈H₁₇ and Si–C₁₆H₃₃) seems not to lead to a significant increase of the butane/methane selectivity and butane permeability when compared to the silica with hydrophilic surface groups, probably because of the unfavorable polymer/filler interaction, leading to an agglomeration of the long n-alkyl groups at the surface of the polymer. An increase of butane permeability up to six-fold of unfilled polymer was obtained.     

Nano/subnano-tuning of porous ceramic membranes for molecular separation

In sol–gel processing, porous ceramic membranes can be prepared by sol-coating porous substrates and drying for gelling, followed by a firing process. Ceramic membranes prepared by sol–gel processing can be categorized into amorphous materials such as silica, and crystalline materials such as alumina and titania. Amorphous silica networks, which can be prepared by the polymeric sol route, have ultra-microporous pores that allow small molecules such as helium and hydrogen to permeate. On the other hand, crystalline materials, which are mostly prepared by the colloidal sol route, have nano-sized pores in the range of one to several nanometers. In this article, sol–gel derived SiO₂ and TiO₂ membranes with controlled pore sizes in the range of sub-nano to nanometers will be reviewed with respect to membrane preparation and to their application in the separation of the gas and liquid phases. Ceramic membranes with high performance can be obtained by precise control of membrane structures (pore size, pore size distribution, thickness, pore shape, etc.) and membrane materials (SiO₂, TiO₂, composite oxide, hybrid materials, etc.). Nano/subnano-tuning of porous ceramic membranes is quite important for the improvement of membrane permeability and selectivity.     

Fullerene-silica complexes for medical chemistry

A quantum-chemical study of the interaction of C₆₀ fullerene with nanosized silica was performed. It was demonstrated that a fullerene molecule forms a weakly bound complex with a pyrogenic silica (Aerosil) particle only via the interaction with the silanediol groups of the hydroxyl covering on the particle. By contrast, a fullerene molecule is not bonded to an individual siloxane cycle, and, therefore, fullerosilica gel is formed due to the retention of fullerene molecules in pores of silica gel as a result cooperative action of the siloxane cycles comprising the pore. In both cases, the predicted medico-biological action of medicinal preparations is due to the radical-like and donor-acceptor characteristics of the C₆₀ molecule.     

Preparation of C60–Silica Hybrid Monolith by Sol-Gel Process

A C₆₀–silica hybrid monolith was prepared by the hydrosilylation of C₆₀ in the presence of platinum catalyst followed by sol-gel process with tetraethoxysilane. The hydrosilylation with trichlorosilane, triethoxysilane, chlorodiphenylsilane, and dichlorophenylsilane gave silylated C₆₀s as a brown pasty liquid. The formula was estimated to be C₆₀{Si(OEt)₃}_2.6H_2.6 or C₆₀(SiPh₂Cl)_3.2H_3.2 based on the proton nuclear magnetic resonance spectrum. A C₆₀–silica hybrid gel monolith was obtained by sol-gel process of the silylates and tetraethoxysilane in ethanol followed by aging for 3 weeks at room temperature. The monolith was brown and transparent with a diameter of 25 mm. On the other hand, the sol-gel reaction of tetraethoxysilane, trimethoxyphenylsilane, and C₆₀ provided a heterogeneous gel with a phase separation of C₆₀.     

Highly transparent silica monoliths embedded with high concentration oxide nanoparticles

Silica monoliths embedded with high concentration of γ-Fe₂O₃ or TiO₂ nanoparticles were prepared by a sol–gel procedure designed according to the inherent properties of oxide colloids. In the first step, highly dispersible oxide nanoparticles were produced using an in situ modification sol–gel strategy. Then, these particles were re-dispersed in silicon alkoxide-containing solution to form a stable colloidal solution. The hydrolysis and condensation reactions of alkoxide were catalyzed by an organic base (morpholine). Due to the large molecule size of morpholine, the electric double layer on the surface of colloidal particles was not compressed by the ionized morpholine molecules. The colloidal solution thus remained stable during the gelation process. Through this procedure, oxide nanoparticles could be immobilized homogeneously in the pores of a silica matrix, forming highly transparent and crack-free monoliths.     

Hybrid sol–gel thin films doped with a pH indicator: effect of organic modification on optical pH response and film surface hydrophilicity

Optical sensors for application in innovative wearable sensing systems such as textile-integrated systems and wireless sensor platforms rely on the development of low-cost multifunctional materials compatible with standard fabrication technologies. We are developing optically responsive pH sensitive sol–gel coatings for integration with a mobile wireless smart tag sensing system. For this application, we have fabricated a range of thin pH sensitive films using bromocresol green (BCG) indicator immobilised in inorganic–organic silica hybrid matrices prepared by a sol–gel method and deposited by spin-coating onto glass substrates. The surface hydrophilicity of the films were varied by using the inorganic sol–gel precursor tetraethoxysilane together with either methyltriethoxysilane, ethyltriethoxysilane, phenyltrimethoxysilane or glycidoxypropyltrimethoxysilane as organically modified sol–gel precursors, co-polymerised in different ratios. Spectral characterisation of the films was performed using visible absorption spectroscopy. The shift in absorption maxima and other spectral changes of the different matrices have been identified, and the apparent pK _app values of the immobilised BCG pH indicator determined. The surface wettability properties of the films have been studied by measuring the contact angle of water, formamide and diiodomethane which has allowed the estimation of the surface free energy (SFE) using three different models: Owens–Wendt, Wu and van Oss-Chaudhury-Good. It is shown that the SFE of the hybrid films is directly related to the type and the degree of organic modification, which in turn has a significant effect on the pH response-time of these sensing films.     

Absorption and luminescence spectra and photodecomposition of zinc(II) complex with bis(1,2,3,7,9-pentamethyldipyrrin-8-yl)methane in solution and polymer matrix

New polymeric materials containing dinuclear double-stranded zinc(II) helicate with bis(1,2,3,7,9-pentamethyldipyrrin-8-yl)methane have been prepared on the basis of poly(methyl methacrylate) and tetraethoxysilane. The zinc(II) complex [Zn₂L₂] retains its fluorescence properties in a poly(methyl methacrylate) film. The photostability of [Zn₂L₂] in poly(methyl methacrylate) is higher by a factor of ≈2.5 than in the benzene solution. Conditions have been found for the preparation of [Zn₂L₂]-doped silicate matrix based on tetraethoxysilane via the sol–gel method. The [Zn₂L₂] complex in the tetraethoxysilane solid matrix shows a weak fluorescence with its maximum at λ = 545–549 nm.     

Effect of microstructure and surface roughness on the wettability of superhydrophobic sol–gel nanocomposite coatings

Sol–gel nanocomposite coatings were fabricated by spraying precursor mixtures containing hydrophobically modified silica (HMS) nanoparticles dispersed in sol–gel matrices prepared with acid-catalyzed tetraethoxysilane (TEOS), and methyltriethoxysilane (MTEOS). The hydrophobicity of the coatings increased with increase in the concentration of HMS nanoparticles. Superhydrophobic coatings with water contact angle (WCA) of 166° and roll-off angle <2° were obtained by optimizing the sol–gel processing parameters and the concentration of silica nanoparticles in the coating. FESEM studies have shown that surface has a micro-nano binary structure composed of microscale bumps and craters with protrusions of nanospheres. The properties of composite coatings fabricated by spin coating and spray coating methods were compared. It was found that the microstructure and the wettability were also dependent on the method of application of the coating.     

Time-resolved EPR study of 3C60 in solid matrices

Using time-resolved cw EPR and pulsed EPR techniques, a study was made of the characteristics of the photoexcited triplet state of C₆₀ adsorbed in silica gel pores and embedded in a polymethylmethacrylate matrix. It was found that the time-resolved spectra from ³C₆₀ in these matrices at room temperature retain the absorption/emission features of spectra from ³C₆₀ in frozen solution (≤120 K). Apparently, the combination of molecular rotation and pseudo rotation (resulting from interconversion between Jahn-Teller states) is not fast enough, to lead to complete averaging of the dipole-dipole interaction between the unpaired electrons. The study explored the effect of introduction of solvent molecules in the silica gel pores on the ³C₆₀ spectrum and quenching of the triplet by electron donors.     

Preparation and properties of poly(styrene-co-maleic anhydride)/silica hybrid materials by the in situ sol–gel process

Poly(styrene-co-maleic anhydride)/silica hybrid material has been successfully prepared from styrene–maleic anhydride copolymer and tetraethoxysilane (TEOS) in the presence of a coupling agent (3-aminopropyl)triethoxysilane (APTES) by an in situ sol–gel process. It was observed that the gel time of sol–gel solution was dramatically influenced by the amount of APTES. The hybrid material exhibits optical transparency almost as good as both silica gel and the copolymer. The covalent bonds between organic and inorganic phases were introduced by the aminolysis reaction of the amino group with maleic anhydride units of copolymer to form a copolymer bearing trimethoxysilyl groups, which undergo hydrolytic polycondensation with TEOS. The differential scanning calorimetry (DSC) showed that the glass transition temperature of the hybrid materials increases with increasing of SiO₂ composition. Photographs of scanning electron microscopy (SEM) and atomic force microscopy (AFM) inferred that the size of the inorganic particles in the hybrid materials was less than 20 nm. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1607–1613, 1998     

Sol–gel synthesis of mesoporous silicas containing albumin and guanidine polymers and its application to the bilirubin adsorption

The organic–inorganic composite materials based on mesoporous silica were synthesized using sol–gel method. The surface area of silicas was modified by bovine serum albumin (BSA) and guanidine polymers: polyacrylate guanidine (PAG) and polymethacrylate guanidine. The mesoporous silicas were characterized by nitrogen adsorption–desorption analysis, Fourier transform infrared spectroscopy, transmission electron microscopy. The obtained materials were used as adsorbents for selective bilirubin removal. It was shown that the structural properties and surface area of modified materials depend on the nature of polymers. Incorporation of polymers in silica gel matrix during sol–gel process leads to the formation of mesoporous structure with high pore diameter and a BET surface area equals to 346 m²/g for SiO₂/BSA and 160 m²/g for SiO₂/PAG. Analysis of adsorption isotherms showed that modification of silica by BSA and guanidine polymers increases its adsorption ability to bilirubin molecules. According to Langmuir model, the maximum bilirubin adsorption capacity was 1.18 mg/g.     

Refractive Index Adjustment of SiO<Subscript>2</Subscript> Gel Glass with Zirconium Oxychloride

ZrO₂-SiO₂ binary oxide gel glasses with various Zr contents were prepared by the sol–gel method with zirconium oxychloride and tetraethoxysilane as precursors. It is found that the refractive index of mixed oxide gel glass is linear with the Zr content and suitable heat treatment will give rise to an increase in the refractive index. By employing FTIR techniques, a new Zr—O—Si bond has been investigated with part of the zirconium ions being incorporated into the silica network. The capability to tune the refractive index for the blend sample with Zr ions and to obtain a stable refractive index at relative low treatment temperature suggests that the gel glass is potential matrix for doping with near IR fluorescence organic dyes and make them promising materials for active optical waveguides.     

Silica/poly (N‐vinylimidazolium) nanospheres by combined RAFT polymerization and thiol‐ene click chemistry

We report a facile method that combined sol–gel reaction, reversible addition–fragmentation chain transfer (RAFT)/macromolecular design via interchange of the xanthates process and thiol‐ene click reaction to prepare monodisperse silica core‐poly(N‐vinylimidazole) (PVim) shell microspheres of 200 nm in average diameters. First, silica with C = C double bonds was prepared by the sol–gel reaction of 3‐(trimethoxysilyl)propyl methacrylates (MPS) with tetraethoxysilane in ethanol; SiO₂@PVim were subsequently prepared by grafting PVim chain (Mn = 9800 g/mol, polydispersity index = 1.22) to MPS‐SiO₂ via the thiol‐ene click chemisty. The obtained SiO₂@PVim microspheres show higher catalytic activity toward the hydrolysis of p‐nitrophenyl acetate compared with the PVim homopolymers. The as‐prepared composites have been characterized by scanning electron microscopy, transmission electron microscopy, thermal gravimetric analysis and Fourier transform infrared spectrometry analysis. Copyright © 2014 John Wiley & Sons, Ltd.     

Incorporation of Triarylmethane Dyes into Sol–Gel Matrices Deposited on Textiles

The incorporation of triarylmethane dyes into sol–gel layers formed by modified silica was used for coating of textile materials. The coatings were performed with three triarylmethane dyes differ in electrical net charge and structure: The cationic dye Malachite Green, the anionic Guinea Green and the non-polar Reflex Blue 61. All coating procedures were performed using an acidic sol–gel process starting from a solution of tetraethoxysilane (TEOS) and the dye in a mixture of water and ethanol. Depositions were performed on polyester, polyamide and cotton textiles. Investigation of leaching and photobleaching fastness showed that the stability of the dyes was enhanced by incorporation into the silica layer. Sufficient leaching fastness was only achieved with the cationic dye due to direct attractive electrostatic interaction with the negatively charged silica matrix. Also the addition of a small amount of epoxysilane to the silica sols lead to an enhancement of leaching and bleaching fastness.     

Building Block approach to SiO2–ZrO2 porous materials†

(2‐Hydroxyethyl)trimethylammonium silicate, Si₈O₂₀[N(CH₃)₃(C₂H₄OH)]₈·nH₂O, was allowed to react with zirconium tetrakis(2,4‐pentanedionate) in methanol, resulting in gel formation. The gels were heat‐treated at 650–1000 °C in air. The product at 650 °C showed a specific surface area of 500 m² g⁻¹, and the average pore diameter was ca 4.3 nm, indicating the formation of a thermally stable mesoporous body. Gels with the same composition were also prepared by sol–gel processing using tetraethoxysilane as a silica source. The specific surface area of the product yielded by heating the gels at 650 °C was 425 m² g⁻¹ and the average pore diameter was ca 2.8 nm, which were lower than those of the product from the gels prepared with (2‐hydroxyethyl)trimethylammonium silicate. These differences have been attributed to the difference in nanostructure of the gels, caused by the structure of the silica sources and their polymerization behaviour. Copyright © 1999 John Wiley & Sons, Ltd.     

Water-soluble fullerenes using solubilizing agents, and their applications

Host–guest and supramolecular chemistry can produce water-solubilization of fullerenes such as C₆₀, C₇₀, and C_60/70 derivatives by hydrophobic interactions, CH–π interactions, and/or π–π interactions. For materials and biomedical applications, these water-soluble host–fullerene complexes must have the following important properties: (i) high solubility, (ii) high stability, and (iii) functionalization of the host–fullerene complex. These objectives can be achieved by selection of appropriate host molecules, development of novel solubilizing methods, and synthesis of functionalized host molecules. This review describes the introduction of a variety of host molecules that can solubilize fullerenes in water. In addition, we describe applications of host–fullerene complexes, in particular using photoinduced energy- and electron-transfer processes in water.