Apparent molar heat capacities and volumes of aqueous electrolytes at 25°C: Cd(ClO4)2, Ca(ClO4)2, Co(ClO4)2, Mn(ClO4)2, Ni(ClO4)2, and Zn(ClO4)2

We have used a flow calorimeter and a flow densimeter for measurements leading to apparent molar heat capacities and apparent molar volumes of aqueous solutions of Cd(ClO₄)₂, Ca(ClO₄)₂, Co(ClO₄)₂, Mn(ClO₄)₂, Ni(ClO₄)₂, and Zn(ClO₄)₂. The resulting apparent molar quantities have been extrapolated to infinite dilution to obtain the corresponding standardstate apparent and partial molar heat capacities and volumes. These latter values have been used for calculation of conventional ionic heat capacities and volumes.     

Apparent molar heat capacities and apparent molar volumes of Pr(ClO4)3(aq), Gd(ClO4)3(aq), Ho(ClO4)3(aq), and Tm(ClO4)3(aq) at T=(288.15, 298.15, 313.15, and 328.15) K and p=0.1 MPa

Acidified aqueous solutions of Pr(ClO₄)₃(aq), Gd(ClO₄)₃(aq), Ho(ClO₄)₃(aq), and Tm(ClO₄)₃(aq) were prepared from the corresponding oxides by dissolution in dilute perchloric acid. Once characterized with respect to trivalent metal cation and acid content, the relative densities of the solutions were measured at T=(288.15, 298.15, 313.15, and 328.15) K and p=0.1 MPa using a Sodev O2D vibrating tube densimeter. The relative massic heat capacities of the aqueous systems were also determined, under the same temperature and pressure conditions, using a Picker Flow Microcalorimeter. All measurements were made on solutions containing rare earth salt in the concentration range 0.01 ⩽ m/(mol · kg⁻¹) ⩽ 0.2. Relative densities and relative massic heat capacities were used to calculate the apparent molar volumes and apparent molar heat capacities of the acidified salt solutions from which the apparent molar properties of the aqueous salt solutions were extracted by the application of Young's Rule. The concentration dependences of the isothermal apparent molar volumes and heat capacities of each aqueous salt solution were modelled using Pitzer ion-interaction equations. These models produced estimates of apparent molar volumes and apparent molar heat capacities at infinite dilution for each set of isothermal V_φ,2 and C_pφ,2 values. In addition, the temperature and concentration dependences of the apparent molar volumes and apparent molar heat capacities of the aqueous rare earth perchlorate salt solutions were modelled using modified Pitzer ion-interaction equations. The latter equations utilized the Helgeson, Kirkham, and Flowers equations of state to model the temperature dependences (at p=0.1 MPa) of apparent molar volumes and apparent molar heat capacities at infinite dilution. The results of the latter models were compared to those previously published in the literature.Apparent molar volumes and apparent heat capacities at infinite dilution for the trivalent metal cations Pr³⁺(aq), Gd³⁺(aq), Ho³⁺(aq), and Tm³⁺(aq) were calculated using the conventions V₂^∘(H⁺(aq)) ≡ 0 and C_p2^∘(H⁺(aq)) ≡ 0 and have been compared to other values reported in the literature.     

Sublimation enthalpy of Ni(II) and Cu(II) diethyldithiocarbamate and diethylammonium diethyldithiocarbamate by the sublimation bulb technique

We have used a flow calorimeter and a flow densimeter for measurements leading to apparent molar heat capacities and apparent molar volumes of dilute aqueous solutions of NaIO₃, KMnO₄, and MnCl₂ at 25°C. These apparent molar quantities have been extrapolated to infinite dilution to obtain the corresponding standard state apparent and partial molar heat capacities and volumes. which have then been used for the calculation of conventional ionic heat capacities and volumes.     

Effect of temperature on ionic volumes and heat capacities in methanol

A flow densimeter and flow heat capacity calorimeter have been employed to measure precision densities and specific heats of selected electrolytes and nonelectrolytes in methanol at 20, 25, and 40°C. Apparent molar volumes and heat capacities have been calculated and the corresponding standard state functions, V ^o and C _p, ^o , evaluated. The data have been used, along with known volumes and heat capacity data at 25°C for numerous alkanes, to generate volumes and heat capacities of model compounds for organic electrolytes. Comparison of the thermodynamic functions for the model compounds with those of the corresponding electrolytes at the respective temperatures has made it possible to assign single ion values and to establish the temperature effects of ionic charges on the volumes and heat capacities of solutes.     

A direct hydrogen-1 and phosphorus-31 nuclear magnetic resonance cation solvation study of Al(ClO4)3, Ga(ClO4)3, In(ClO4)3, UO2(ClO4)2, and UO2(NO3)2 in water-acetone-dimethylsulfoxide and water-acetone-hexamethylphosphoramide mixtures

A competitive solvation study of Al(ClO₄)₃, Ga(ClO₄)₃, In(ClO₄)₃, UO₂(ClO₄)₂, and UO₂(NO₃)₂ in water-acetone-dimethylsulfoxide (DMSO) and water-acetone-hexamethylphosphoramide (HMPT) mixtures has been carried out by direct H¹ and P³¹ nuclear magnetic resonance (NMR) techniques. At low temperature, proton and ligand exchange are slow enough in these systems to permit the observation of signals for bulk and coordinated molecules of water and the organic bases (DMSO and HMPT). Both DMSO and HMPT compete effectively with water for coordination sites in the Al³⁺, Ga³⁺, and In³⁺ systems, with steric effects dominating the HMPT results. Both Al³⁺ and In³⁺ are able to bind a maximum of two to three HMPT molecules, for example. In contrast, UO²⁺ is solvated selectively by the organic molecules to the allowed maximum of 4 molecules per cation. H¹ and P³¹ NMR spectral results support the formation of only the mono-, tri-, and tetra-HMPT solvation complexes.     

Apparent and standard molar volumes and heat capacities of aqueous Ni(ClO4)2 from 25 to 85°C

Apparent molar heat capacities and volumes of aqueous Ni(C10₄)₂ were measured from 25 to 85°C over a concentration range of 0.02 to 0.8 mol-kg^-1 using a Picker flow microcalorimeter and a Picker vibrating-tube densimeter. An extended Debye-Hückel equation was fitted to the experimental data to obtain expressions for the apparent molar properties as functions of ionic strength for Ni(ClO₄)₂(aq). The standard-state partial molar properties for Ni(C10₄)₂(aq) in the temperature range 25 to 85°C were obtained and can be expressed by empirical equations as 97787 and withT in K. The standard partial molar heat capacities and volumes for Ni²⁺ (aq) from 25 to 86°C were obtained by using the additivity rule and data for ClO^- ₄(aq) in the literature. These values were extrapolated to 300°C by employing the Helgeson-Kirkham-Flower (HKF) equations, amended to include a standard-state correction term.     

Molar Volumes and Heat Capacities of Electrolytes and Ions in Nonaqueous Solvents: 1. Formamide

Apparent molar volumes and heat capacities of 27 electrolytes have been measured as a function of concentration in formamide at 25°C using a series-connected flow densimeter and Picker calorimeter system. These data were extrapolated to infinite dilution using the appropriate Debye–Hückel limiting slopes to give the corresponding standard partial molar quantities. Ionic volumes and heat capacities at infinite dilution were obtained by an appropriate assumption based on the reference electrolyte Ph₄PBPh₄ (TPTB). The ionic volumes, but not the heat capacities, agree reasonably well with previously published statistically based predictions. The values obtained are discussed in terms of simple models of electrolyte solution behavior and a number of interesting features are noted, including, possible dependencies of ionic volumes on solvent isothermal compressibility and of ionic heat capacities on solvent electron acceptor abilities.     

稀土高氯酸盐-谷氨酸配合物[Pr2(L-α-Glu)2(ClO4)(H2O)7](ClO4)3•4H2O的低温热容和热化学研究

合成了一种稀土高氯酸盐-谷氨酸配合物. 经TG/DTG、化学和元素分析、FTIR及与相关文献对比, 确定其组成为[Pr₂(L-α-Glu)₂(ClO₄)(H₂O)₇](ClO₄)₃•4H₂O, 纯度为99.0%以上. 利用显微熔点仪分析发现其没有熔点. 在78～370 K温区, 用精密绝热量热仪测量其低温热容, 在285～306 K温区发现一明显吸热峰, 归结为固-固相变过程. 通过相变温区三次重复热容测量, 得到相变温度T_tr、相变焓Δ_trH_m和相变熵Δ_trS_m分别为(297.158±0.280) K, (12.338±0.016) kJ•mol^－1和(41.520±0.156) J•K^－1•mol^－1. 用最小二乘法将非相变温区的热容对温度进行拟合, 得到了热容随温度变化的两个多项式方程. 用此方程进行数值积分, 得到每隔5 K的舒平热容值和相对于273.15 K的热力学函数值. 根据TG/DTG结果, 推测了该配合物的热分解机理. 依据Hess定律, 选择1 mol•dm^－3盐酸为量热溶剂, 利用等温环境溶解-反应量热计, 测定了该配合物的标准摩尔生成焓为: Δ_fH_m⁰＝－(7223.1±2.4) kJ•mol^－1.     

Activity and Osmotic Coefficients from the Emf of Liquid-Membrane Cells. VII: Co(ClO4)2, Ni(ClO4)2, K2SO4, CdSO4, CoSO4, and NiSO4

The activity coefficients of CdSO₄ CoSO₄, and NiSO₄ are determined from the emf of liquid-membrane cells, like those described in the papers I–VI of this series. The activity coefficients of the auxiliary salts Co(ClO₄)₂, Ni(ClO₄)₂, and K₂SO₄, needed to eliminate the problem of extrapolation to infinite dilution of the 2–2 salts, are also measured. CdSO₄ CoSO₄ and NiSO₄ in the dilute region deviate downward from the limiting law by a larger extent than believed in the past, thus creating the need for the activity coefficients to be recalculated and systematically lowered by 8–16%. The activity coefficients of Co(ClO₄)₂ and Ni(ClO₄)₂, too, need to be corrected by around –3%. For K₂SO₄, the original values, although scattered, were substantially correct. Pitzer's theory best-fit parameter, able to provide the activity and osmotic coefficients of the salts considered, are reported.     

Thermodynamics of aqueous phosphate solutions: Apparent molar heat capacities and volumes of the sodium and tetramethylammonium salts at 25°C

A Picker flow microcalorimeter and a flow densimeter were used to obtain apparent molar heat capacities and apparent molar volumes of aqueous solutions of Na₃PO₄ and mixtures of Na₂HPO₄ and NaH₂PO₄. Identical measurements were also made on solutions of tetramethylammonium salts to evaluate the importance of anion-cation interaction. The experimental apparent molar properties were analyzed in terms of a simple extended Debye-Hückel model and the Pitzer ion-interaction model, both with a suitable treatment for the effect of chemical relaxation on heat capacities, to derive the partial molar properties of H₂PO ₄ ^– (aq), HPO ₄ ^2– (aq) and PO ₄ ^3– (aq) at infinite dilution. The volume and heat capacity changes for the second and third ionization of H₃PO₄(aq) have been determined from the experimental data. The importance of ionic complexation with sodium is discussed.     

Volumes and heat capacities of water andN-methylformamide in mixtures of these solvents

The densities of mixtures ofN-methylformamide (NMF) and water (W) have been measured at 5, 15, 25, 35, and 45°C, and the heat capacities of the same system at 25°C, both over the whole mole-fraction range. From the experimental data the apparent molar volumes (_v) and heat capacities (_c) of NMF and of water are evaluated. The relatively small difference between the partial molar volumes or heat capacities at infinite dilution and the corresponding molar volumes or heat capacities of the pure liquids for both NMF and water suggests that with regard to these quantities replacement of a NMF molecule by a water molecule or vice versa produces no drastic changes. The partial molar volume of water at infinite dilution in NMF is smaller than the molar volume of pure water, but the corresponding partial molar heat capacity is unexpectedly high.     

Aqueous partial molar heat capacities and volumes for NaTcO4 and NaReO4

A flow microcalorimeter/densimeter system has been commissioned to measure heat capacities and densities of solutions containing radioactive species as a function of temperature. Measurements were made for NaTcO₄(aq) at six temperatures (189.15 K to 373.15 K for the heat capacities, 287.43 K to 396.67 K for the densities) over the molality range 0.01 to 0.29 mol-kg^–1. Measurements for NaReO₄(aq) (NaReO₄ is a common nonradioactive analogue for NaTcO₄) were made under similar conditions, but for eight temperatures and a more extensive range of molalities, 0.05 to 0.65 mol-kg^–1. Heat capacities of NaCl(aq) reference solutions were also measured from 293.15 K to 398.15 K.The heat capacity and density data are analysed using Pitzer's ioninteraction model. Equations for the apparent molar heat capacities and volumes are reported. Values of the NaReO₄(aq) partial molar heat capacities are compared to literature values based on integral heats of solution. The agreement between the two sets of NaReO₄ results is good below 330 K, but only fair at the higher temperatures. Values of the partial molar volumes have also been derived. Using literature values and the results of our experiments, it is calculated that the disproportionation of hydrated TcO₂(s) to form TcO ₄ ^– (aq) and Tc(cr) occurs more readily at high temperatures. The uncertainties introduced by using thermodynamic values for ReO ₄ ^– (aq), in the absence of values for TcO ₄ ^– (aq), are discussed.     

Investigations on the spin-crossover complex [Fe(bzimpy)2](ClO4)2 and its Mn2+, Co2+, Ni2+ and Zn2+ analogues

Summary A series of transition metal complexes [M(bzimpy)₂](ClO₄)₂ (M=Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Zn²⁺;bzimpy=2,6-bis(benzimidazol-2-yl)pyridine) was synthesized and characterized by elemental analysis, UV-Vis and far-IR spectroscopy. The electronic spectra of [Ni(bzimpy)₂](ClO₄)₂ in solution and solid state reveal a ligand field splitting parameter ₀ in the range of 11470 cm^–1 to 11840 cm^–1. The simultaneous existence of two species with distinct spin state is found for [Fe(bzimpy)₂](ClO₄)₂ by means of variable temperature far-IR measurements. Assignments of the observed far-IR bands are given on the basis of the investigations of the variation of the metal ion in [M(bzimpy)₂](ClO₄)₂.This paper is dedicated to Professor Ulrich Wannagat on the occasion of his 70^th birthday with warmest personal wishes.     

Group additivity for the standard partial molal heat capacities and volumes of polar compounds in methanol at 25°C

A flow heat capcity calorimeter and a flow vibrating tube densimeter have been used to measure the apparent molal heat capacities and volumes of benzene and 25 polar compounds in methanol at 25°C. These quantities have been extrapolated to infinite dilution to obtain the standard partial molal heat capacities and volumes. The and data have been used in conjunction with an additivity scheme previously determined for alkanes. Group contributions were evaluatd for –OH, –NH₂, –COOH, –C₆H₅, C=O, –COO–, –CONH–, –O–, –S–, and –S₂–. The concentration dependences of _cp and _v of nonelectrolytes in methanol are qualitatively similar but much smaller than in water.     

The volumetric and thermochemical properties of YCl3(aq), YbCl3(aq), DyCl3(aq), SmCl3(aq), and GdCl3(aq) at T=(288.15, 298.15, 313.15, and 328.15) K and p=0.1 MPa

Relative densities and massic heat capacities have been measured for acidified aqueous solutions of YCl₃(aq), YbCl₃(aq), DyCl₃(aq), SmCl₃(aq), and GdCl₃(aq) at T=(288.15, 298.15, 313.15, and 328.15) K and p=0.1 MPa. These measurements have been used to calculate experimental apparent molar volumes and heat capacities which, when used in conjunction with Young’s rule, were used to calculate the apparent molar properties of the aqueous chloride salt solutions. The latter calculations required the use of volumetric and thermochemical data for aqueous solutions of hydrochloric acid that have been previously reported in the literature. The concentration dependences of the apparent molar properties have been modeled using Pitzer ion interaction equations to yield apparent molar volumes and heat capacities at infinite dilution. The temperature and concentration dependences of the apparent molar volumes and heat capacities of each trivalent salt system were modeled using modified Pitzer ion interaction equations. These equations utilized the revised Helgeson, Kirkham, and Flowers equations of state to model the temperature dependences of apparent molar volumes and heat capacities at infinite dilution. Calculated apparent molar volumes and heat capacities at infinite dilution have been used to calculate single ion properties for the investigated trivalent metal cations. These values have been compared to those previously reported in the literature. The differences between single ion values calculated in this study and those values calculated from thermodynamic data for aqueous perchlorate salts are also discussed.     

Synthesis, characterization, solvatochromic behavior and crystal structures of complexes [CoIII(salophen)(thioacetamide)2]ClO4 and [CoIII(salophen)(thiobenzamide)2]ClO4

Two new cobalt(III) complexes of the Schiff base N,N′-disalicylidene-1,2-phenylendiimine dianion (salophen), trans- [Co^III(salophen)(ta)₂]ClO₄, (ta = thioacetamide) (1) and trans-[Co^III(salophen)(tb)₂]ClO₄, (tb = thiobenzamide) (2) were synthesized and characterized using single-crystal X-ray diffraction and spectroscopic techniques. Both complexes show solvatochromism in a variety of solvents. Complex (1) crystallized from CHCl₃ as a solvate of orthorhombic symmetry, space group Pca2₁ with a = 17.3480(10) Å, b = 18.7522(10) Å, c = 18.8128(11) Å, α = β = γ = 90°, and Z = 8. The cobalt(III) center lies in a distorted octahedral environment. The crystal structure of (1) consists of two independent [Co^III(salophen)(ta)₂]⁺ cations and ClO₄ ^- anions held together essentially via hydrogen bonds and π-π stacking interactions. Complex (2), forming also a CHCl₃ solvate, crystallized in the monoclinic space group P2₁/n with a = 14.710(3) Å, b = 13.506(3) Å, c = 18.595(4) Å, β = 100.295(4)°, and Z = 4. The geometry around cobalt(III) center is a distorted octahedron. The crystal structure of (2) contains a [Co^III(salophen)(tb)₂]⁺ complex with a remarkably twisted salophen ligand. Both complexes, (1) and (2), contain approximately one disordered CHCl₃ molecule per Co in the solid state.     

Heat capacities,volumes and solubilities of pentanol in aqueous surfactant solutions

Apparent molar heat capacities and volumes of pentanol (PentOH) 0.05m in dodecyltrimethylammonium chloride (DTAC), dodecyldimethylammonium chloride (DDAC) and dodecylamine hydrochloride (DAC) micellar solutions were measured at 25°C. They were assumed to approach the standard infinite dilution values and rationalized by means of previously reported equations. The distribution constant between the aqueous and the micellar phase and heat capacity and volume of pentanol in both phases were thus derived. The results show that the presence of methyl groups on the surfactant head group does not appreciably influence the apparent molar volume and heat capacity of pentanol in micellar phase and the free energy of transfer of pentanol from the aqueous to the micellar phase. Also, the apparent molar heat capacities of pentanol in micellar solutions as a function of surfactant concentration show evidence of two maxima for DAC and of one maximum for DTAC whereas no maxima were detected for DDAC. According to the literature data for alkyltrimethylammonium bromides these maxima can be ascribed to the presence of structural post-micellar transitions. It is shown that the C_,PentOH vs. surfactant molality curve for DAC lies between that for hexadecyltrimethylammonium bromide and that for tetradecyltrimethylammonium bromide. This evidence, which is similar to that found for solubilities, agrees with the previously reported idea that the removal of a CH₃ group from the head group of surfactant is equivalent to the introduction of a CH₂ group in its hydrophobic moiety. By comparing data for DTAC with those for the corresponding bromide, the role of the nature of the counterion in the thermodynamics of solubilization of pentanol in micellar solutions is derived.     

Röntgenographische und schwingungsspektroskopische Untersuchungen an wasserfreien Chloraten und Bromaten des Strontiums,Bariums und Bleis. Kristallstruktur des Sr(ClO3)2 und Sr(BrO3)2

X-ray, I.R., and Raman Studies of the Anhydrous Chlorates and Bromates of Strontium, Braium, and Lead. Crystal Structure of Sr(ClO₃)₂ and Sr(BrO₃)₂ . Single crystals of the hitherto badly characterized anhydrous halates Sr(ClO₃)₂, Sr(BrO₃)₂, Ba(BrO₃)₂, Pb(ClO₃)₂, and Pb(BrO₃)₂ have been obtained by crystallization from an aqueous solution or by heating aqueous suspensions of the corresponding monohydrates to 95, 185, 130, and 105°C, respectively, in a vacuum. The halates crystallize in the orthorhombic space group Fdd2–C (Z = 8) with the exception of Sr(BrO₃)₂, which is distorted to the monoclinic space group Cc? C (Z = 4). The crystal structure of Sr(ClO₃)₂ and Sr(BrO₃)₂ have been determined using single crystal X-ray diffraction data. In both compounds, distorted SrO₈ dodecahedra (bisphenoids) are connected to a four-connected three-dimensional net. The ClO ions and one of the two crystallographically non-equivalent BrO ions are strongly distorted. The structures of these compounds and those of Ba(IO₃)₂ and of Ba(ClO₃)₂ · 1 H₂O type compounds are related to a hypothetical AB₂ structure with diamond like arrangement of the metal ions of the common super group Fddd–D. The results of i.r. and Raman spectroscopic measurements are reported and discussed in terms of the crystal structures.     

Thermodynamic Properties of Aqueous Dimethylamine and Dimethylammonium Chloride at Temperatures from 283 K to 523 K: Apparent Molar Volumes, Heat Capacities, and Temperature Dependence of Ionization

Data for the apparent molar volumes of aqueous dimethylamine and dimethylammonium chloride have been determined with platinum vibrating tube densimeters at temperatures 283.15 K T 523.15 K and at different pressures. Apparent molar heat capacities were measured with a Picker flow microcalorimeter over the temperature range 283.15 K T 343.15 K at 1 bar. At high temperatures and steam saturation pressures, the standard partial molar volumes of dimethylamine and dimethylammonium chloride deviate towards positive and negative discontinuities at the critical temperature and pressure, as is typical for many neutral and ionic species. The revised Helgeson-Kirkham-Flowers (HKF) model and fitting equations based on the appropriate derivatives of solvent density have been used to represent the temperature and pressure dependence of the standard partial molar properties. The standard partial molar heat capacities of dimethylamine ionization , calculated from both models, are consistent with literature data obtained by calorimetric measurements at T 398 K to within experimental error. At temperatures below 523 K, the standard partial molar volumes of dimethylamine ionization agree with those of morpholine to within 12 cm³-mol^-1, suggesting that the ionization of secondary amine groups in each molecule is very similar. The extrapolated value for of dimethylamine above 523 K is very different from the values measured for morpholine at higher temperature. The difference is undoubtedly due to the lower critical temperature and pressure of (CH₃)₂NH(aq).     

Mixed-ligand and binuclear complexes of oxovanadium(IV)

Summary Mixed ligand complexes of the type [VOLA]ClO₄ where L=5-bromosalicylaldehyde (L) or 5-nitrosalicylaldehyde (L) and A=2, 2-dipyridyl (A) or 1, 10-phenanthroline (A) have been prepared. Treatment of the mononuclear complexes, [VOLA]ClO₄, withp-phenylenediamine (ppd) orm-phenylenediamine (mpd) yielded homobinuclear [VOLA-NC₆H₄N-LAVO](ClO₄)₂, complexes, which were characterised by elemental analyses, spectra, magnetic susceptibility and molar conductance measurements.