合成双酚AF的新方法

由六氟丙酮三水合物和苯胺,经缩合、重氮化、水解、Friedel-Crafts烷基化等4步反应在常压下合成了双酚 AF。首先,以五氧化二铌为催化剂,在 n (HFA•3H₂O) : n (aniline) : n (Nb₂O₅) = 2 : 1 : 0.1,回流 6 h 条件下,合成出中间体（Ⅰ）,收率高达96.3%。然后在重氮化温度为 ﹣2 ～ 2 ℃,硫酸质量分数为 14.7%,n (Ⅰ) : n (H₂SO₄) : n (NaNO₂) = 1 : 4.1 : 1.1,及水解时硫酸质量分数为 50%,n (H₂SO₄) : n (Ⅰ) = 11.0 : 1、108～112 ℃反应 1.5 ～ 2 h 的优化条件下,化合物Ⅰ经重氮化、水解后以 92.7%的高收率得到中间体 2-（4-羟基苯）六氟异丙醇（Ⅱ）;再在甲磺酸存在下,化合物Ⅱ与苯酚经Friedel-Crafts烷基化反应以 72.4% 的收率合成了目标产物双酚 AF（Ⅲ）,总收率为 64.6%（以苯胺为基准计算）。     

The first acetimino complexes of Rh(III). 4-imino-2-methylpentan-2-amino-Rh(III) complexes through metal-assisted intramolecular aldol-type condensation of two acetimino ligands

[Rh(Cp)Cl(mu-Cl)](2) (Cp = pentamethylcyclopentadienyl) reacts (i) with [Au(NH=CMe(2))(PPh(3))]ClO(4) (1:2) to give [Rh(Cp)(mu-Cl)(NH=CMe(2))](2)(ClO(4))(2) (1), which in turn reacts with PPh(3) (1:2) to give [Rh(Cp)Cl(NH=CMe(2))(PPh(3))]ClO(4) (2), and (ii) with [Ag(NH=CMe(2))(2)]ClO(4) (1:2 or 1:4) to give [Rh(Cp)Cl(NH=CMe(2))(2)]ClO(4) (3) or [Rh(Cp)(NH=CMe(2))(3)](ClO(4))(2).H(2)O (4.H(2)O), respectively. Complex 3 reacts (i) with XyNC (1:1, Xy = 2,6-dimethylphenyl) to give [Rh(Cp)Cl(NH=CMe(2))(CNXy)]ClO(4) (5), (ii) with Tl(acac) (1:1, acacH = acetylacetone) or with [Au(acac)(PPh(3))] (1:1) to give [Rh(Cp)(acac)(NH=CMe(2))]ClO(4) (6), (iii) with [Ag(NH=CMe(2))(2)]ClO(4) (1:1) to give 4, and (iv) with (PPN)Cl (1:1, PPN = Ph(3)P=N=PPh(3)) to give [Rh(Cp)Cl(imam)]Cl (7.Cl), which contains the imam ligand (N,N-NH=C(Me)CH(2)C(Me)(2)NH(2) = 4-imino-2-methylpentan-2-amino) that results from the intramolecular aldol-type condensation of the two acetimino ligands. The homologous perchlorate salt (7.ClO(4)) can be prepared from 7.Cl and AgClO(4) (1:1), by treating 3 with a catalytic amount of Ph(2)C=NH, in an atmosphere of CO, or by reacting 4with (PPN)Cl (1:1). The reactions of 7.ClO(4) with AgClO(4) and PTo(3) (1:1:1, To = C(6)H(4)Me-4) or XyNC (1:1:1) give [Rh(Cp)(imam)(PTo(3))](ClO(4))(2).H(2)O (8) or [Rh(Cp)(imam)(CNXy)](ClO(4))(2) (9), respectively. The crystal structures of 3 and 7.Cl have been determined.     

On the reactivity toward ketones of new methyl amino complexes of Rh(III) and Ag(I). Synthesis of ortho-rhodiated acetophenone methyl imine complexes

MeNH(2) reacts with silver salts AgX (2:1) to give [Ag(NH(2)Me)(2)]X [X = TfO = CF(3)SO(3) (1.TfO) and ClO(4) (1.ClO(4))]. Neutral mono(amino) Rh(III) complexes [Rh(Cp*)Cl(2)(NH(2)R)] [R = Me (2a), To = C(6)H(4)Me-4 (2b)] have been prepared by reacting [Rh(Cp*)Cl(mu-Cl)](2) with RNH(2) (1:2). The following cationic methyl amino complexes have also been prepared: [Rh(Cp*)Cl(NH(2)Me)(PPh(3))]TfO (3.TfO), from [Rh(Cp*)Cl(2)(PPh(3))] and 1.TfO (1:1); [Rh(Cp*)Cl(NH(2)R)2]X, where R = Me, X = Cl, (4a.Cl), from [Rh(Cp*)Cl(mu-Cl)]2 and MeNH2 (1:4), or R = Me, X = ClO4 (4a.ClO4), from 4a.Cl and NaClO4 (1:4.8), or R = To, X = TfO (4b.TfO), from [Rh(Cp*)Cl(mu-Cl)](2), ToNH(2) and TlTfO (1:4:2); [Rh(Cp*)(NH(2)Me)(tBubpy)](TfO)(2) (tBubpy = 4,4'-di-tert-butyl-2,2'-bipyridine, 5.TfO), from 2a, TlTfO and tBubpy (1:2:1); [Rh(Cp*)(NH(2)Me)(3)](TfO)2 (6.TfO) from [Rh(Cp*)Cl(mu-Cl)](2) and 1.TfO (1:4). 2-6 constitute the first family of methyl amino complexes of rhodium. 1 and 4a.ClO(4) react with acetone to give, respectively, the methyl imino complexes [Ag{N(Me)=CMe(2)}()]X [X = TfO (7.TfO), ClO(4) (7.ClO(4))], and [Rh(Cp*)Cl(Me-imam)]ClO(4) [8.ClO(4), Me-imam = N,N'-N(Me)=C(Me)CH(2)C(Me)(2)NHMe]. 7.X (X = TfO, ClO(4)) are new members of the small family of methyl acetimino complexes of any metal whereas 8.ClO4 results after a double acetone condensation to give the corresponding bis(methyl acetimino) complex and an aldol-like condensation of the two imino ligands. The acetimino complex [Ag(NH=CMe(2))(2)]ClO(4) reacts with [Rh(Cp*)Cl(imam)]ClO(4) [1:1, imam = N,N'-NH=C(Me)CH(2)C(Me)(2)NH(2)] to give [Rh(Cp*)(imam)(NH=CMe(2))](ClO(4))(2) (9a.ClO(4)). 8.ClO(4) reacts with AgClO(4) (1:1) in MeCN to give [Rh(Cp*)(Me-imam)(NCMe)](ClO(4))2 (9b.ClO(4)), which in turn reacts with XyNC (Xy = C(6)H(3)Me(2)-2,6) or with MeNH(2) (1:1) to give [Rh(Cp*)(Me-imam)L](ClO(4))(2) [L = XyNC (9c.ClO(4)), MeNH(2) (9d.ClO(4))]. 6.TfO reacts with acetophenone to give [Rh(Cp*){C,N-C(6)H(4)C(Me)=N(Me)-2}(NH(2)Me)]TfO (10a.TfO), the first complex resulting from such a condensation and cyclometalation reaction. In turn, 10a.TfO reacts with isocyanides RNC (1:1) at room temperature to give [Rh(Cp*){C,N-C(6)H(4)C(Me)=NMe-2}(CNR)]TfO [R = tBu (10b.TfO), Xy (10c.TfO)], or 1:12 at 60 degrees C to give [Rh(Cp*){C,N-C(=NXy)C(6)H(4)C(Me)=N(Me)-2}(CNXy)]TfO (11.TfO). The crystal structures of 9a.ClO(4).acetone-d6, 9c.ClO(4), and 10a.TfO have been determined.     

Observation of the pi...H hydrogen-bonded ternary complex, (C(2)H(4))(2)H(2)O, using matrix isolation infrared spectroscopy

FTIR absorption spectra of water-containing ethene:Ar matrices, with compositions of ethene up to 1:10 ethene:Ar, have been recorded. Systematically increasing the concentration of ethene reveals features in the spectra consistent with the known 1:1 ethene:water complex, which subsequently disappear on further increase in ethene concentration. At high concentrations of ethene, new features are observed at 3669 and 3585 cm(-1), which are red-shifted with respect to matrix-isolated nu(3) and nu(1) O-H stretching modes of water and the 1:1 ethene:water complex. These shifts are consistent with a pi...H interaction of a 2:1 ethene:water complex of the form (C(2)H(4)...H-O-H...C(2)H(4)). The analogous (C(2)D(4))(2)H(2)O complex shows little shifting from positions associated with (C(2)H(4))(2)H(2)O, while the (C(2)H(4))(2)D(2)O isotopomer shows large shifts to 2722.3 and 2617.2 cm(-1), having identical nu(3)(H(2)O)/nu(3)(D(2)O) and nu(1)(H(2)O)/nu(1)(D(2)O) values when compared with monomeric water isotopomers. Features at 3626.1 and 2666.2 cm(-1) are also observed and are attributed to (C(2)H(4))(2)HDO. DFT calculations at the B3LYP/6-311+G(d,p) level for each isotopomer are presented, and the predicted vibrational frequencies are directly compared with experimental values. The interaction energy for the formation of the 2:1 ethene:water complex from the 1:1 ethene:water complex is also presented.     

Reduction of bis

The reduction of symmetric, fully-substituted titanocene dichlorides bearing two pendant omega-alkenyl groups, [TiCl2(eta5-C5Me4R)2], R = CH(Me)CH= CH2 (1a). (CH2)2CH=CH2 (1b) and (CH2)3CH=CH2 (1c), by magnesium in tetrahydrofuran affords bis(cyclopentadienyl)titanacyclopentanes [Ti(IV)[eta1:eta1: eta5:eta5-C5Me4CH(Me)CH(Ti)CH2CH(CH2(Ti))CH(Me)C5Me4]] (2a), [Ti(IV)[eta1:eta1:eta5: eta5-C5Me4(CH2)2CH(Ti)(CH2)2CH(Ti)(CH2)2C5Me4]] (2b) and [Ti(IV)[eta1:eta1:eta5:eta5-C5Me4(CH2)2CH(Ti)CH(Me)CH(Me)CH(Ti)(CH2)2C5Me4]](2c), respectively, as the products of oxidative coupling of the double bonds across a titanocene intermediate. For the case of complex 1c, a product of a double bond isomerisation is obtained owing to a preferred formation of five-membered titanacycles. The reaction of the titanacyclopentanes with PbCl2 recovers starting materials 1a from 2a and 1b from 2b, but complex 2c affords, under the same conditions, an isomer of 1c with a shifted carbon - carbon double bond, [TiCl[eta5-C5Me4(CH2CH2CH=CHMe)]2] (1c'). The titanacycles 2a-c can be opened by HCl to give ansa-titanocene dichlorides ansa-[[eta5:eta5-C5Me4CH(Me)CH2CH2CH(Me)CH(Me)C5Me4]TiCl2] (3a), ansa-[[eta5:eta5-C5Me4(CH2)8C5Me4]TiCl2] (3b), along with a minor product ansa-[[eta5:eta5-C5Me4CH2CH=CH(CH2)5C5Me4]TiCl2] (3b'), and ansa-[[eta5:eta5-CsMe4(CH2)3CH(Me)CH(Me)CH=CHCH2C5Me4]TiCl2] (3c), respectively, with the bridging aliphatic chain consisting of five (3a) and eight (3b, 3b' and 3c) carbon atoms. The course of the acidolysis changes with the nature of the pendant group; while the cyclopentadienyl ring-linking carbon chains in 3a and 3b are fully saturated, compounds 3c and 3b' contain one asymetrically placed carbon-carbon double bond, which evidently arises from the beta-hydrogen elimination that follows the HCl addition.     

Singlet and triplet photocycloaddition reactions of 2-pyridones with propenoate and 2,4-pentadienotes,and the frontier molecular orbital analysis

Regioselective photocycloadditions of 2-pyridones ( 1 ) with 2,4-pentadienoates ( 3 ) were analysed and compared with the reactions with propenoate ( 2 ), and origins of the different regioselectivities were inferred from frontier molecular orbital properties by the use of PM3-CI method. Direct photoreactions of 1 with 3 being α,β,γ,δ-unsaturated carboxylates gave four types of regio-selective [2+2]cycloadducts, 3-β:4-α-4, 5, 3-δ:4-γ-6,7,5-δ: 6-γ-8, 9 and 5-δ:6-γ-[2+2]cycloadducts 10,11. Sensitized photoreactions of 1 with 3 did not occur, and fluorescence of 1 was weakly quenched by 3. Otherwise, main cycloadducts in the sensitized reactions of 1 with 2 have been obtained as 5-α:6-β-[2+2]cycloadducts, which were different from main 3-β:4-α-[2+2]cycloadducts of the direct reactions, and these site-and regio-selectivities were inferred from the different frontier molecular orbital coefficients at the. 3-and 6-positions of 1 for the triplet and singlet states. Formations of 4–7 were also interpreted by both effects of frontier orbital HSOMO-LUMO interactions and of the electrostatic interaction between 1 and 3. The other site-and regioselective adducts 8–11 were inferred to be formed by the electrostatic interactions similar to 2-pyridone photodimerization.     

Ab initio study of the reactions of Ga(2P, 2S, and 2P) with methane

The interactions of Ga(2P:4s(2)4p1, 2S:4s(2)5s1, and 2P:4s(2)5p1) with CH4 is studied by means of Hartree-Fock self-consistent-field (SCF) calculations using relativistic effective core potentials and multiconfigurational-SCF plus multireference variational and perturbational on second-order M?ller-Plesset configuration interaction calculations. The Ga atom 2P(4s(2)5p1) state can spontaneously insert into the CH4. In this interaction the 4 2A potential energy surface is initially attractive and becomes repulsive only after meeting with the 3 2A surface, adiabatically linked with the Ga(2S:4s(2)5s1) + CH4 fragments. The Ga atom 2S(4s(2)5s1) excited state inserts in the C-H bond. In this interaction the 3 2A potential energy surface initially attractive, becomes repulsive after meet the 2 2A' surface linked with the Ga(2P:4s(2)4p1) + CH4 fragments. The two 2A curves (2 2A and X 2A) derived from the interaction of Ga(2P:4s(2)4p1) atoms with methane molecules are initially repulsive. The 2 2A curve after an avoided crossing with the 3 2A curve goes smoothly down and reaches a minimum: after this point, it shows an energy barrier. The top of this barrier is located below the energy value of the Ga(2S:4s(2)5s1) + CH4 fragments. After this energy top the 2 2A curve goes down to meet the X 2A curve. The 2 2A curve becomes repulsive after the avoided crossing with the X 2A curve. The X 2A curve becomes attractive only after its avoided crossing with the 2 2A curve. The lowest-lying X 2A potential leads to the HGaCH3 X 2A intermediate molecule. This intermediate molecule, diabatically correlated with the Ga(2S:4s(2)5s1) + CH4 fragments, which lie 6 kcal/mol, above the ground-state reactants, the dissociation channels of this intermediate molecule leading to the GaH + CH3 and H + GaCH3 products. These products are reached from the HGaCH3 intermediate without activation barriers. The work results suggest that Ga atom in the first excited state in gas-phase methane molecules could produce better quality a-C:H thin films through CH3 radicals, as well as gallium carbide materials.     

Asymmetric and symmetric annellation effects—III Benzocoronenes

1:2–5:6-Dibenzocoronene (IV) was obtained from 1:2–4:5–8:9-tribenzopyrene (II) via the dianhydride (III). 1:2–4:5-Dibenzopyrene (V) condensed twice with maleic anhydride. The resulting dianhydride (VI) gave 1:2-benzocoronene (VII) on decarboxylation. 1:12-o-Phenyleneperylene (X) was obtained by a zinc dust melt from the quinone (VIII). The annellation effects passing from triphenylene and perylene to the benzocoronenes indicate the presence of a triphenylene complex within the electronic fine structure of coronene.     

Ferromagnetism in an extended three-dimensional, diamond-like copper(II) network: a new copper(II)/1-hydroxybenzotriazolato complex exhibiting soft-magnet properties and two transitions at 6.4 and 4.4 K

The use of the substituted benzotriazole ligand btaOH (1-hydroxybenzotriazole) in copper(II) chemistry has yielded a structurally and magnetically very interesting complex. The [Cu2(O2CMe)4(H2O)2]/btaOH.H2O/aqueous NH3 (1:4:4, 1:3:3, 1:2:2) reaction system in MeOH gives dark brown-green [Cu(btaO)2(MeOH)]n (4) in approximately 80% yield. 4 crystallizes in the tetragonal space group P4(3)2(1)2 with (at 25 degrees C) a = 9.915(1) A, b = 9.915(1) A, c = 14.715(2) A, and Z = 4. The structure consists of a 3D, diamond-like copper(II) lattice. The CuII atom has a square pyramidal geometry with four btaO- ligands at the basal plane. The btaO- ion functions as a bidentate bridging ligand, with N(3) and the deprotonated oxygen being the ligating atoms. Dc and ac magnetic susceptibility measurements, together with low-field (10 G) and high-field (up to 5000 G) magnetization data, are consistent with ferromagnetic interactions on the scale of the crystal lattice with two critical temperatures: 6.4 and 4.4 K. The former critical temperature could correspond to a transition from a paramagnetic to a ferromagnetic state; the latter one, to a transition from a ferromagnetically ordered state to its 3D ordering. The magnetic data, along with the field dependence of the magnetization and the EPR data, are also in line with a soft magnet. Moreover, the EPR studies performed on 4 reveal unique features reported for the first time in the field of molecular magnetism.     

Activation of electron-transfer reduction of oxygen by hydrogen bond formation of superoxide anion with ammonium ion

A hydrogen bond formed between the superoxide anion and the ammonium ion (NH4+) accelerates electron transfer from the C60 radical anion to oxygen significantly, whereas the tetra-n-butylammonium ion has no ability to form a hydrogen bond with the superoxidie anion, exhibiting no acceleration of the electron-transfer reduction of oxygen. The second-order rate constant of electron transfer from C60*- to O2 increases linearly with increasing concentration of NH4+. This indicates that O2*- produced in the electron transfer from C60 to O2 is stabilized by 1:1 complex formation between O2*- and NH4+. The 1:1 complex formed between O2*- and NH4+ was detected by ESR. The binding of O2*- with NH4+ results in a positive shift of the reduction potential of O2 with increasing concentration of NH4+, leading to the acceleration of electron transfer from C60*- to O2.     

Coordination Compounds of Schiff-Base Ligands Derived from Diaminomaleonitrile (DMN): Mononuclear, Dinuclear, and Macrocyclic Derivatives

Copper(II) and V(IV)O complexes of an open chain (1:2) Schiff-base ligand (H(2)L1), derived by the template condensation of diaminomaleonitrile (DMN) and salicylaldehyde, and dicopper(II) complexes of (2:2) macrocyclic Schiff-base ligands derived by template condensation of diformylphenols and diaminomaleonitrile, have been synthesized and studied. Structures have been established for the first time for mononuclear Cu(II) and V(IV)O derivatives of the open chain ligand H(2)L1 (1:2), a dinuclear macrocyclic Cu(II) complex derived from a 2:2 macrocyclic ligand (H(2)M1), and the half-condensed 1:1 salicylaldehyde ligand (H(2)L2). [Cu(L1)] (1) (L1 = C(18)H(10)N(4)O(2)) crystallized in the monoclinic system, space group P2(1)/n (No. 14), with a = 11.753(6) ?, b = 7.708(5) ?, c = 16.820(1) ?, and Z = 4. [VO(L1)(DMSO] (2) crystallized in the orthorhombic system, space group Pbca (No. 61), with a = 22.534(9) ?, b = 23.31(1) ?, c = 7.694(5) ?, and Z = 8. H(2)L2 (C(18)H(8)N(4)O) (3) crystallized in the monoclinic system, space group P2(1)/c (No. 14), with a = 13.004(6) ?, b = 11.441(7) ?, c = 7.030(4) ?, and Z = 4. [Cu(2)(M3)](CH(3)COCH(3)) (4) (M3 = C(32)H(24)N(8)O(4)) crystallized in the monoclinic system, space group C2/c (No. 15), with a = 38.33(2) ?, b = 8.059(4) ?, c = 22.67(2) ?, and Z = 8. [Cu(L3)(DMSO)] (5) (L3 = C(20)H(14)N(2)O(4)) crystallized in the triclinic system, space group P&onemacr; (No. 2), with a = 10.236(4) ?, b = 13.514(4) ?, c = 9.655(4) ?, and Z = 2. 4 results from the unique addition of two acetone molecules to two imine sites in [Cu(2)(M1)](ClO(4))(2) (M1 = 2:2 macrocyclic ligand derived from template condensation of DMN and 2,6-diformyl-4-methylphenol). 4 has extremely small Cu-OPh-Cu bridge angles (92.0, 92.8 degrees ), well below the expected lower limit for antiferromagnetic behavior, but is still antiferromagnetically coupled (-2J = 25.2 cm(-)(1)). This behavior is associated with a possible antiferromagnetic exchange term that involves the conjugated framework of the macrocyclic ligand itself. The ligand L3 in 5 results from hydrolysis of M1 on recrystallization of [Cu(2)(M1)](ClO(4))(2) from undried dimethyl sulfoxide.     

Raney nickel reductions—VIII A synthesis of 1:2-benzanthracene and its 3′-methyl and 4-methyl derivatives

1:2-Benzanthracene and the 3′-methyl derivative have been prepared by Raney nickel reduction of the sulphuric esters of the leuco derivatives of 1:2-benzanthraquinone and 4′-chloro-3′-methyl-1:2-benzanthraquinone, followed by dehydrogenation. 3-Hydroxy-1:2-benzanthraquinone was methylated in the 4-position by formaldehyde, sodium hydrosulphite and sodium hydroxide solution (the Marschalk reaction). Simultaneous reduction of the nuclear hydroxyl and quinone groups was effected by Raney nickel reduction of the trisulphuric ester of 3:9:10-trihydroxy-4-methyl-1:2-benzanthracene, and the resultant hexahydro-4-methyl-1:2-benzanthracene was dehydrogenated to 4-methyl-1:2-benzanthracene. The preparation of 3:4:9:10-dibenzopyrene from Mayvat brilliant red AF by Raney nickel reduction of the sulphuric ester of the leuco derivative and subsequent dehydrogenation is described.     

Preliminary communication Properties of nonlinear supramolecular liquid crystals containing thiophenedicarboxylic acids

Novel mesogenic supramolecules have been constructed from the 2 :1 molar ratio of trans 4-alkoxy-4-stilbazoles CnPS (1) complexed with 2,5-thiophenedicarboxylic acid THDA (4) to form the kinked hydrogen-bonded (H-bonded) complexes (CnPS)-THDA. The analogous H-bonded complexes (CnPP)2-THDA consisting of the 2:1 molar ratio of 4-alkoxypyridines CnPP (2) and THDA (4) are also compared. In contrast to linear complexes (CnPS)2-TA prepared from the 2 :1 molar ratio of CnPS (1) and terephthalic acid TA (5), supramolecular liquid crystals with kinked molecular structures (CnPS)2-THDA are generated by introducing the thiophene unit into the H-bonded complexes. In addition, the chiral complex (C5*PS)2-THDA composed of an optically active proton acceptor (S)-(-)-4-(2-methylbutoxy)-4-stilbazole C5*PS ( 3 ) and THDA ( 4 ) (2 :1 molar ratio) is reported. Significantly, the first thiophene based supramolecular liquid crystals have been constructed in this study, and the mesogenic properties of the supramolecules can be easily adjusted not only by the nonlinear shape of the thiophene unit but also by the dipole moment derived from the lone-pair electrons of the sulphur hetero-atom.     

Mechanistic studies of olefin and alkyne trimerization with chromium catalysts: deuterium labeling and studies of regiochemistry using a model chromacyclopentane complex

A system for catalytic trimerization of ethylene utilizing chromium(III) precursors supported by diphosphine ligand PNP(O4) = (o-MeO-C6H4)2PN(Me)P(o-MeO-C6H4)2 has been investigated. The mechanism of the olefin trimerization reaction was examined using deuterium labeling and studies of reactions with alpha-olefins and internal olefins. A well-defined chromium precursor utilized in this studies is Cr(PNP(O4))(o,o'-biphenyldiyl)Br. A cationic species, obtained by halide abstraction with NaB[C6H3(CF3)2]4, is required for catalytic turnover to generate 1-hexene from ethylene. The initiation byproduct is vinylbiphenyl; this is formed even without activation by halide abstraction. Trimerization of 2-butyne is accomplished by the same cationic system but not by the neutral species. Catalytic trimerization, with various (PNP(O4))Cr precursors, of a 1:1 mixture of C2D4 and C2H4 gives isotopologs of 1-hexene without H/D scrambling (C6D12, C6D8H4, C6D4H8, and C6H12 in a 1:3:3:1 ratio). The lack of crossover supports a mechanism involving metallacyclic intermediates. Using a SHOP catalyst to perform the oligomerization of a 1:1 mixture of C2D4 and C2H4 leads to the generation of a broader distribution of 1-hexene isotopologs, consistent with a Cossee-type mechanism for 1-hexene formation. The ethylene trimerization reaction was further studied by the reaction of trans-, cis-, and gem-ethylene-d2 upon activation of Cr(PNP(O4))(o,o'-biphenyldiyl)Br with NaB[C6H3(CF3)2]4. The trimerization of cis- and trans-ethylene-d2 generates 1-hexene isotopomers having terminal CDH groups, with an isotope effect of 3.1(1) and 4.1(1), respectively. These results are consistent with reductive elimination of 1-hexene from a putative Cr(H)[(CH2)4CH=CH2] occurring much faster than a hydride 2,1-insertion or with concerted 1-hexene formation from a chromacycloheptane via a 3,7-H shift. The trimerization of gem-ethylene-d2 has an isotope effect of 1.3(1), consistent with irreversible formation of a chromacycloheptane intermediate on route to 1-hexene formation. Reactions of olefins with a model of a chromacyclopentane were investigated starting from Cr(PNP(O4))(o,o'-biphenyldiyl)Br. alpha-Olefins react with cationic biphenyldiyl chromium species to generate products from 1,2-insertion. A study of the reaction of 2-butenes indicated that beta-H elimination occurs preferentially from the ring CH rather than exo-CH bond in the metallacycloheptane intermediates. A study of cotrimerization of ethylene with propylene correlates with these findings of regioselectivity. Competition experiments with mixtures of two olefins indicate that the relative insertion rates generally decrease with increasing size of the olefins.     

第五、六族元素的有机化合物在有机合成中应用的研究 LII: 含氟烯醚的合成

含氟烯醚可作为亲偶极体进行偶极环加成反应. 某些含氟烯醚在亲核试剂作用下可作为烷基化试剂. 本文报导了Wittig反应通过芳氧.     

Cationic Rh complexes with novel spiro tetraarylpentaborate anions prepared from arylboronic acids and aryloxorhodium complexes

Ar-B(OH)2 (1a: Ar = C6H4OMe-4, 1b: Ar = C6H3Me2-2,6) react immediately with Rh(OC6H4Me-4)(PMe3)3 (2) in 5 : 1 molar ratio at room temperature to generate [Rh(PMe3)4]+[B5O6Ar4]- (3a: Ar = C6H4OMe-4, 3b: Ar = C6H3Me2-2,6). p-Cresol (92%/Rh), anisole (80%/Rh) and H2O (364%/Rh) are formed from 1a and 2. The reaction of 1a with 2 for 24 h produces [Rh(PMe3)4]+[B5O6(OH)4]- (4) as a yellow solid. This is attributed to hydrolytic dearylation of once formed 3a because the direct reaction of 3a with excess H2O forms 4. An equimolar reaction of 2 with phenylboroxine (PhBO)3 causes transfer of the 4-methylphenoxo ligand from rhodium to boron to produce [Rh(PMe3)4]+[B3O3Ph3(OC6H4Me-4)]- (5). Arylboronic acids 1a and 1b react with Rh(OC6H4Me-4)(PR3)3 (6: R = Et, 8: R = Ph) and with Rh(OC6H4Me-4)(cod)(PR3) (11: R = iPr, 12: R = Ph) to form [Rh(PR3)4]+[B5O6Ar4]- (7a: R = Et, Ar = C6H4OMe-4, 7b: R = Et, Ar = C6H3Me2-2,6, 9a: R = Ph, Ar = C6H3Me2-2,6) and [Rh(cod)(PR3)(L)]+[B5O6Ar4]- (13b: R = iPr, L = acetone, Ar = C6H3Me2-2,6, 14a: R = Ph, L = PPh3, Ar = C6H4OMe-4, 14b: R = Ph, L = PPh3, Ar = C6H3Me2-2,6), respectively. Hydrolysis of 14a yields [Rh(cod)(PPh3)2]+[B5O6(OH)4]- (15) quantitatively.     

Prenylisoflavone derivatives from the roots of Hedysarum scoparium

Four new prenylisoflavone derivatives, namely, 5-hydroxy-4'-methoxy-8-prenyl-2'-hydroxyisopropyldihydrofurano[4,5:6,7]-isoflavone (1), 5-hydroxy-4'-methoxy-6-prenyl-2'-hydroxyisopropyldihydrofurano[4,5:8,7]-isoflavone (2), 5-hydroxy-4'-methoxy-8-prenyl-1',2'-peroxyl-3',3'-dimethyldihydropyrano[5,6:6,7]-isoflavone (3), and 5-hydroxy-4'-methoxy-6-prenyl-1',2'-peroxyl-3',3'-dimethyldihydropyrano[5,6:8,7]-isoflavone (4), together with three known ones 5-7, were isolated from the roots of Hedysarum scoparium. Their structures were established by means of detailed spectroscopic analysis (IR, EI- or HR-ESI-MS as well as 1D- and 2D-NMR), and by comparison of their spectroscopic data with those reported for structurally related compounds.     

Synthesis and structure of tricyclic quinazoline alkaloid oxalates

Oxalates of the alkaloids deoxyvasicinone, 2,3-tetra-, and their seven-membered analog 2,3-pentamethylen-3,4-dihydroquinazol-4-one and the complex of 2,3-pentamethylen-3,4-dihydroquinazol-4-one hydrochloride with oxalic acid were synthesized. It was found that 2:1, 2:1, and 1:1 alkaloid:oxalic acid complexes, respectively, were formed. The last complex had 2,3-pentamethylen-3,4-dihydroquinazol-4-one, oxalic acid, and HCl in a 2:1:2 ratio, respectively. X-ray crystal structures of single crystals were performed. The oxalate of 2,3-pentamethylen-3,4-dihydroquinazol-4-one and its hydrochloride formed salts with a protonated N1 atom and involvement of only one hydroxyl. The other alkaloids formed a complex with oxalic acid through N1…H-O H-bonds involving both acid hydroxyls. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 152–156, March–April, 2007.     

A convenient approach to heterocyclic building blocks: synthesis of novel ring systems containing a [5,6]Pyrano[2,3-c]pyrazol-4(1H)-one moiety

Starting from commercially available educts, a straightforward synthetic route to new heterocyclic building blocks is exemplified with the one- or two-step synthesis of tri-, tetra-, or pentacyclic ring systems. Representatives of the following novel ring systems are prepared from 3-methyl-1-phenyl-2-pyrazolin-5-one and the corresponding o-halo-arenecarbonyl chloride using calcium hydroxide in refluxing 1,4-dioxane: pyrimidino[4',5':5,6]pyrano[2,3-c]pyrazol-4(1H)-one, thieno[3',2':5,6]pyrano[2,3c]pyrazol- 4-(1H)-one, thieno[3',4':5,6]pyrano[2,3-c]pyrazol-4(1H)-one, thieno[3',2':4',5']thieno[2',3':5,6]-pyrano[2,3-c]pyrazol-4(1H)-one, [1,3]dioxolo[5',6'][1]benzothieno[2',3':5,6]pyrano-[2,3-c]- pyrazol-4(1H)-one, pyridazino[4',3':5,6]pyrano[2,3-c]pyrazol-4(1H)-one and pyrazolo-[4',3':5',6']pyrido[3',4':5,6]pyrano[2,3-c]pyrazol-4(1H)-one. While the latter two ring systems are directly obtained due to a spontaneous intramolecular substitution reaction, in the other reactions uncyclised 4-aroylpyrazol-5-ols are produced, which are cyclised into the target heterocycles in a subsequent synthetic step (i.e. treatment with NaH in DMF). Detailed NMR spectroscopic investigations ((1)H-, (13)C-, (15)N-) with the obtained compounds were undertaken to unambiguously prove the new structures.     

Supramolecular liquid crystals containing isoquinoline hydrogen-bonded acceptors

6-Dodecyloxyisoquinoline IS ( 1 ) has been synthesized and utilized as a proton acceptor to generate a series of novel mesogenic supramolecules. Two mesogenic supramolecular dimers IS-OBA and IS-COOBA have been constructed from a 1:1 molar ratio of IS complexed either with 4-decyloxybenzoic acid OBA ( 2 ) or with 4-decyloxycarbonylbenzoic acid COOBA ( 3 ). A kinked mesogenic supramolecular trimer, i.e. a double H-bonded complex (IS)-THDA, has been constructed from a 2:1 molar ratio of IS complexed with 2,5-thiophenedicarboxylic acid THDA ( 4 ). The mesogenic properties of the H-bonded complex (IS2)-THDA are compared with those of previously reported H-bonded complexes (C12PS)-THDA and (C12PP2)-THDA consisting of a 2:1 molar ratio of trans -4-dodecyloxy-4-stilbazole C12PS 2 ( 5 ) or 4-dodecyloxypyridine C12PP2 (6 ) with THDA. Significantly, the first isoquinoline-based supramolecular liquid crystals have been built, and their mesogenic properties have been introduced or modified by fused- N -heterocyclic rings.