Spectrophotometric determination of oxalate ion with N,N'-diethyl-N,N'-[[4,4'-dihydroxy-1,1'-binaphthalene]-3,3'-diyl]bisbenzamide and copper(II).

A simple and rapid spectrophotometric method for the determination of oxalate ion was established by the fading of a colored complex between N,N'-diethyl-N,N'-[[4,4'-dihydroxy-1,1'-binaphthalene]-3,3'-diyl]bisbenzamide and copper(II). Beer's law was obeyed in the concentration range of 0.1 - 2.0 microg cm(-3) for oxalate ion, with an effective molar absorptivity at 533 nm and the relative standard deviation being 8.0 x 10(3) dm(3) mol(-1) cm(-1) and 1.0% (n = 5), respectively. This proposed method has excellent reproducibility, and was applied to recovery tests of oxalate ion in tap water and human urine; the results were satisfactory. This is suggested that the method is based on the reaction of copper(II) to copper(I) with oxalate ion.     

Sequential determination of iron(II) and iron(III) in pharmaceutical by flow-injection analysis with spectrophotometric detection.

A flow injection procedure for the sequential spectrophotometric determination of iron(II) and iron(III) in pharmaceutical products is described. The method is based on the catalytic effect of iron(II) on the oxidation of iodide by bromate at pH = 4.0. The reaction was monitored spectrophotometrically by measuring the absorbance of produced triiodide ion at 352 nm. The activating effect for the catalysis of iron(II) was extremely exhibited in the presence of oxalate ions, while oxalate acted as a masking agent for iron(III). The iron(III) in a sample solution could be determined by passing through a Cd-Hg reductor column introduced in the FIA system to reduce iron(III) to iron(II), which allows total iron determination. Under the optimum conditions, iron(II) and iron(III) could be determined over the range of 0.05 - 5.0 and 0.10 - 5.0 microg ml(-1), respectively with a sampling rate of 17 +/- 5 h(-1). The experimental limits of detection were 0.03 and 0.04 microg ml(-1) for iron(II) and iron(III), respectively. The proposed method was successfully applied to the speciation of iron in pharmaceutical products.     

Catalytic kinetic spectrophotometry for the determination of trace amount of oxalic acid in biological samples with oxalic acid-rhodamine B-potassium dichromate system

A new catalytic kinetic spectrophotometric method was proposed for determining trace oxalic acid based on the catalytic effect of oxalate on the oxidation of potassium dichromate with rhodamin B in 0.10 M of sulfuric acid. Good linearity is obtained over the concentration range 0.40-6.0 microg/mL of oxalic acid. After the reactions of the catalytic and non-catalytic systems were terminated by using 2.00 mL of 4 M sodium hydroxide solution, they can be stable for 3 h at room temperature. The apparent activation energy of the catalytic reaction is 12.44 kJ/mol. The effect of 50 coexisting substances was observed. The method was used to determine trace oxalic acid in tea, spinach and urine samples with satisfactory results.     

A simple spectrophotometric method for the determination of copper in industrial, environmental, biological and soil samples using 2,5-dimercapto-1,3,4-thiadiazole.

A simple spectrophotometric method is presented for the rapid determination of copper at a trace level using 2,5-dimercapto-1,3,4-thiadiazole (DMTD) as a new spectrophotometric reagent. The method is based on the reaction of non-absorbent DMTD in a slightly acidic (0.002-0.014 mol dm(-3) sulfuric acid) aqueous solution with copper(II) to produce a highly absorbent greenish-yellow chelate product that has an absorption maximum at 390 nm. The reaction is instantaneous and the absorbance remains stable for 24 h. The average molar absorption coefficient and Sandell's sensitivity were found to be 5.65 x 10(4) dm3 mol(-1) cm(-1) and 10 ng cm(-2) of CuII, respectively. Linear calibration graphs were obtained for 0.1-20 microg cm(-3) of CuII; the stoichiometric composition of the chelate is 1:2 (Cu:DMTD). A large excess of over 50 cations, anions and complexing agents (e.g. tartrate, oxalate, citrate, phosphate, thiourea, SCN-) do not interfere in the determination. The method was successfully used for the determination of copper in several Standard Reference Materials as well as in some environmental water samples, biological samples, soil samples and solutions containing both copper(I) and copper(II) and complex synthetic mixtures. The method has high precision and accuracy (s = +/-0.01 for 0.5 microg cm(-1)).     

Highly sensitive reaction of nitrate with brucine and 3-methyl-2-benzothiazolinone hydrazone hydrochloride for the determination of nitrate in environmental samples.

A modified and highly sensitive spectrophotometric method for the determination of nitrate in trace quantities in environmental samples is described. The method is based on the reaction of nitrate ion with brucine and 3-methyl-2-benzothiazolinone hydrazone hydrochloride (MBTH) in sulfuric acid medium to yield a violet-colored product which is stable for over two days. The optimum photometric range for the determination of nitrate is 0.04-0.16 microg cm(-3) and the Sandell's sensitivity being 0.000279 microg cm(-2). The proposed method is applied to various water samples and the results indicate that the reaction is highly sensitive than the original brucine method.     

Spectrophotometric determination of trace amount of copper(II) ion based on complexation with an anthraquinone derivative.

The spectrophotometric determination of Cu(II) with an anthraquinone derivative (Alizarin Red S) has been investigated. The experimental conditions, such as the pH of the sample and concentration of ligand, were optimized. This method is simple and sensitive for determination of Cu(II) ion. The interfering effects of diverse ions were investigated. Copper ion was determined by measuring the absorbance of the Cu(II)-ARS complex at 510 nm. Beer's law was obeyed over the concentration range of 0.011 - 0.320 mmol dm(-3) and the detection limit (S/N = 3) was 0.038 microg cm(-3). The relative standard deviation at 20 microg cm(-3) was 1.02% (n = 5). The method was applied for real samples.     

Determination of trace amounts of copper(II) by using catalytic redox reaction between methylene blue and ascorbic acid.

A sensitive and selective kinetic-spectrophotometric method is proposed for the determination of microg mL(-1) amounts of Cu2+ based on its catalytic effect on the oxidation of L-ascorbic acid by Methylene Blue in a strongly acidic medium. The reaction is monitored spectrophotometrically by measuring the decrease in color intensity of Methylene Blue at 665 nm. The analysis of Cu2+ ion is performed by a fixed-time method. At a given time of 2 min at pH 2.20 and 32 degrees C, the detection limit is 10 ng mL(-1) and the relative standard deviation for 0.4 microg mL(-1) Cu2+ is 3.60% (n = 6). The method is free from most of the interferences and the effect of diverse ions on the determination of Cu2+ is also reported. The proposed method is virtually specific to copper and has been satisfactorily applied to its determination in electric copper wire samples and pharmaceutical products. Results were also verified by the atomic absorption spectrometry technique (AAS).     

Copper(II)-catalysed oxidative coupling reaction of 3-hydroxyacetanilide with 3-methyl-2-benzothiazolinone hydrazone for the spectrophotometric determination of traces of copper(II)

A spectrophotometric method is developed for the determination of traces of copper(II), based on the catalytic oxidative coupling reaction of 3-hydroxyacetanilide with 3-methyl-2-benzothiazolinone hydrazone in the presence of ammonia and hydrochloric acid. Beer's law is obeyed in the copper(II) concentration range of 0.008-0.16 microg mL(-1), and the molar absorptivity at 530 nm is 2.5x10(5) L mol(-1) cm(-1). The Sandell's sensitivity of the product is 0.000254 microg cm(-2). The optimum reaction conditions and other important analytical parameters have been investigated. The proposed method is applied to the analysis of water and soil samples and the results are compared with the literature method.     

Solid phase extraction and spectrophotometric determination of silver with 2-(2-quinolylazo)-5-diethylaminophenol as chromogenic reagent.

A new chromogenic reagent, 2-(2-quinolylazo)-5-diethylaminophenol (QADEAP), was synthesized. A sensitive, selective and rapid method has been developed for the determination of microg/L level silver ion based on the rapid reaction of silver(l) with QADEAP and the solid phase extraction of the colored chelate with C18 cartridge. The QADEAP reacts with Ag(l) to form a violet chelate of a molar ratio 1:2 (silver to QADEAP) in pH 3.5-8.0. This chelate was prconcentrated by solid phase extraction with C18 cartridge. An enrichment factor of 100 was achieved. The molar absorptivity of the chelate is 1.30 x 10(5) L mol(-1) cm(-1) at 590 nm in measured solution. Beer's law is obeyed in the range of 0.01-0.6 microg/ml. The relative standard deviation for eleven replicate samples of 0.01 microg/ml is 1.15%. The detection limit is 0.02 microg/L in the original samples. This method was applied to the determination of microg/L level silver ion in water with good results.     

Catalytic-kinetic determination of trace amount of formaldehyde by the spectrophotometric method with a bromate-Janus green system

A new simple and rapid catalytic kinetic method for the determination of trace amount of formaldehyde is described. The method is based on the catalytic effect of formaldehyde on the oxidation of Janus green by bromate in the present of sulfuric acid. The reaction monitored spectrophotometrically by measuring the decrease in absorbance of the reaction mixture at 618 nm. The fixed-time method was used for the first 150 s. For initiation of the reaction, under the optimum conditions, in the concentration range of 0.003-2.5 microg ml(-1) formaldehyde can be determined with a limit of detection 0.0015 microg ml(-1). The relative standard deviation of five replicate measurements is 2.3% for 1.0 microg ml(-1) of formaldehyde. The method was used for the determination of formaldehyde in real samples with satisfactory results.     

Flow Injection Determination of Oxalate Based on Its Catalytic Effect on the Oxidation of p-Chloride Aniline by Dichromate

In a sulfuric acid medium, oxalate exhibits a strong catalytic effect on the oxidation of p-chloride aniline(ClBN) by dichromate, and the red oxidation product of ClBN has a maximum absorhancy at 520 nm. Based on this founding, a new FI method for determining oxalate was developed. A calibration curve of oxalate in the range of 0.40—17.0μg/mL was obtained. The detection limit was 0.10μg/mL. Sampling rate was 103-samples/h. The possible interference by the co-existing substances or ions was examined. This new method was applied to the determination of micro amounts of oxalate in real samples with satisfactory results.     

Kinetic spectrophotometric method for the determination of oxalic acid by its catalytic effect on the oxidation of safranine by dichromate

A new catalytic kinetic spectrophotometric method for the determination of oxalic acid has been described based on its catalytic effect on the redox reaction between safranine and dichromate in dilute sulfuric acid media. The reaction is monitored photometrically by measuring the decrease in absorbance of safranine at the maximum wavelength of 530 nm. Under the optimum conditions, a calibration graph from 0.10 to 10.00 microg ml(-1) of oxalic acid with a detection limit of 0.08 microg ml(-1) was obtained. The relative standard deviation (R.S.D.) for ten replicate measurements of 1.0 and 5.0 microg ml(-1) oxalic acid was 2.7 and 2.5%, respectively. The purposed method is simple, sensitive, selective and inexpensive. The applicability of the proposed method was determined by the determination of oxalic acid in spinach and wastewater samples with satisfactory results.     

A rapid spectrophotometric method for the determination of molybdenum in industrial, environmental, biological and soil samples using 5,7-dibromo-8-hydroxyquinoline.

A very simple, ultra-sensitive and highly selective non-extractive spectrophotometric method for the determination of trace amount of molybdenum(VI) using 5,7-dibromo-8-hydroxyquinoline (DBHQ) has been developed. 5,7-Dibromo-8-hydroxyquinoline reacts in a slightly acidic solution (0.05 - 1.0 M H2SO4) with molybdenum(VI) to give a deep greenish-yellow chelate which has an absorption maximum at 401 nm. The reaction is instantaneous and the absorbance remains stable for over 24 h. The average molar absorption coefficient and Sandell's sensitivity were found to be 4.13 x 10(3) L mol(-1) cm(-1) and 7 ng cm(-2) of molybdenum(VI), respectively. Linear calibration graphs were obtained for 0.1 - 50 microg mL(-1) of molybdenum(VI). The stoichiometric composition of the chelate is 1:3 (Mo:DBHQ). A large excess of over 50 cations, anions and some common complexing agents (e.g. EDTA, oxalate, citrate, phosphate, thiourea, SCN-) do not interfere with the determination. The method was successfully used in the determination of molybdenum in several Standard Reference Materials (alloys, steels and waters) as well as in some environmental waters (inland and surface), biological samples (human blood and urine), soil samples, solution containing both molybdenum(V) and molybdenum(VI) and complex synthetic mixtures. The method has high precision and accuracy (S = +/-0.01 for 0.5 microg mL(-1)).     

A kinetic method for the determination of nitrite by its catalytic effect on the oxidation of chlorpromazine with nitric acid.

A catalytic spectrophotometric method for the determination of trace amounts of nitrite is proposed. In acidic solution, chlorpromazine (CP) is oxidized by nitric acid to form a red compound, which is further oxidized to a colorless compound. The reaction is accelerated by trace amounts of nitrite and can be followed by measuring the absorbance at 525 nm: nitrite ion is regenerated and multiplied by nitric acid. The absorbance of the reaction increased with an increase in the reaction time, reached a maximum and decreased rapidly. Since the time required for the absorbance to reach the maximum decreased with increasing nitrite concentration, this value was used as the measured parameter for the nitrite determination. Under the optimum experimental conditions (2.3 M nitric acid, 1.2 x 10(-5) M CP, 40 degrees C), nitrite can be determined in the range 0-100 microg l(-1). The relative standard deviations (n = 6) are 4.7 and 1.8% for 40 and 100 microg l(-1) nitrite, respectively. The detection limit of this method (3sigma) is 1.2 microg l(-1). This method was successfully applied to a determination of nitrite in natural water samples.     

Catalytic Kinetic Determination of Micro Amounts of Oxalic Acid by Second-Order Derivative Oscillopolarography

ＩｎｔｒｏｄｕｃｔｉｏｎＯｘａｌａｔｅｉｎｎｏｒｍａｌｕｒｉｎｅｉｓｍａｉｎｌｙｆｏｒｍｅｄｂｙｔｈｅｍｅｔａｂｏｌｉｔｅｏｆｅｘｔｒｉｎｓｉｃｆｏｏｄａｎｄｉｎｔｒｉｎｓｉｃｇｌｕｃｏｓｅａｎｄｐｒｏｔｅｉｎ .Ｔｈｅｈｉｇｈｏｘａｌｉｃａｃｉｄｃｏｎｃｅｎｔｒａｔｉｏｎｉｎｕｒｉｎｅｉｓｔｈｅｍｏｓｔｄａｎｇｅｒｏｕｓｆａｃｔｏｒｒｅｓｕｌｔｉｎｇｉｎｋｉｄｎｅｙｓｔｏｎｅａｎｄｕｒｉｎｅｔｒａｃｔｓｔｏｎｅ[1] .Ｔｈｅｙａｒｅｆｏｒｍｅｄｐｒｉｍａｒｉｌｙｂｅｃａｕｓｅｏｆｔｈｅｅｒ ｒｏｒｏ…     

Study of the absorption spectra of the 4f electron transitions of the praseodymium complex with ciprofloxacin and its analytical application

Ciprofloxacin (CPFX) is proposed as a reagent for the derivative spectrophotometric determination of praseodymium in mixed rare earths. The absorption spectra of 4f electron transitions of the praseodymium complex with CPFX was studied by normal and derivative spectrophotometry. The stoichiometry of the praseodymium-CPFX complex was calculated by the molar ratio and continuous variations methods. A ratio of Pr to CPFX of 1:3 was found. The absorption bands of the 4f electron transitions of the complex were enhanced markedly. Using the third derivative spectrum. Beer's law was obeyed up to 35 microg cm(-3) of praseodymium. The relative standard deviation is 0.62% for 14 microg cm(-3) of praseodymium. The detection and quantification limits were 0.17 and 0.56 microg cm(-3) of praseodymium, respectively. A method for the direct determination of praseodymium in mixtures of rare earths with good accuracy and selectivity is described.     

Novel sensitive spectrophotometric method for the trace determination of cyanide in industrial effluent.

The high toxicity of the cyanide ion at low concentration necessitates its analysis in a variety of environmental samples with a very low cyanide content. A new sensitive spectrophotometric method has been developed for the trace determination of cyanide with ninhydrin (NH) in an alkaline medium. Beer's law is obeyed in the range of cyanide concentration 0.04-0.24 microg cm(-3), and the molar absorptivity at 590 nm is 2.20 x 10(5) dm3 mol(-1) cm(-1). The Sandell's sensitivity of the product is 0.000118 microg cm(-2). The optimum reaction conditions and other important analytical parameters have been investigated. The results obtained by using the proposed method for environmental samples agree well with those obtained by the Aldridge standard method.     

Kinetic method for determination of ascorbic acid on flow injection system by using its catalytic effect on the complexation reaction of an ultra sensitive colorimetric reagent of porphyrin with Cu(II)

A kinetic method performed on a flow injection system is described for the determination of ascorbic acid by using its catalytic effect on the complexation reaction of Cu(II) with 5,10,15,20-tetrakis(4-N-trimethyl-aminophenyl)porphyrin. The characteristic spectrum of porphyrin (Soret band), which shows intense absorption around 400 nm (epsilon>2.0 x 10(5) cm(-1)M(-1)), was used first time for determining ascorbic acid. By incorporating the complexation reaction into a flow injection system, ascorbic acid could be determined either over a broad dynamic range of 0.1-1000 microg/ml or at a trace level below 5 ng/ml. Good repeatability was also achieved by testing a working standard of 0.1 microg/ml with 10 injections at a throughput of 35 h(-1), obtaining a relative standard deviation of 0.11%. Substances like amino acids, vitamins, sugars, organic acids and metal ions, showed no or little interference even present at high concentrations. The method was validated in the determination of ascorbic acid contents of some commercially available soft drinks by comparison with the official 2,6-dichloroindophenol method with reasonable agreement.     

Sensitized spectrophotometric determination of Cr(III) ion for speciation of chromium ion in surfactant media using alpha-benzoin oxime

A simple and accurate micellanized spectrophotometric method for determination of trace amounts of Cr(III) ion in tab and top water and a synthetic mixture has been described. The micellar method is based on effect of organized molecular assemblies such as micelles in spectrophotometric measurement due to their effect on the systems of interest. The ability of micellar system in solubilizing of sparingly soluble ligand or complexes has been used for increasing figures of merit of an analytical method. Due to solubility increasing in aqueous media requirement for a primary extraction can be eliminated. Using the alpha-benzoin oxime (alpha-BO) spectrophotometric determination of Cr(III) ion has been performed and results are compared. The spectrophotometric determination of Cr(III) ion using alpha-BO in the presence of non-ionic surfactant Triton X-100 has been performed. The influence of type and amount of surfactant, pH, complexation time and amount of ligand were examined. Finally, the repeatability, accuracy and the effect of interfering ions on the determination of Cr(III) ion was evaluated. The proposed methods successfully with recovery yield of almost 100% have been applied to the rapid and simple determination of Cr(III) ion in the real samples. There is a good agreement between methods and atomic absorption spectrometry. The Beers law is obeyed over the concentration range of 0.1-13.7 microg mL(-1) for micellar media. The detection limit is 0.8 ng mL(-1). The molar absorptivity of complex is 5350 L mol(-1) cm(-1).     

Kinetic spectrophotometric determination of low levels of nitrite by catalytic reaction between pyrogallol red and bromate

A kinetic spectrophotometric method for the determination of trace nitrite (0.003-1.000 microg/ml) based on its catalytic effect on the reaction between potassium bromate and pyrogallol red in acidic media is described. The reaction is monitored spectrophotometrically by measuring the decreasing colour of pyrogallol red at 467 nm by the fixed-time method. At a given time of 3.0 min at 30 degrees, the detection limit is 0.001 microg/ml and the relative standard deviation for 0.010 microg/ml nitrite is 1.8% (n = 8). The method is free from most interferences, especially from large amounts of nitrate and ammonium. The procedure was successfully applied to the determination of trace nitrite in natural water without preconcentration.