Accuracy in determination of the temperature and partial pressure of CO<Subscript>2</Subscript> in CO<Subscript>2</Subscript>:N<Subscript>2</Subscript>:H<Subscript>2</Subscript>O:NO<Subscript>2</Subscript> mixtures by multiple-frequency laser probing

We present the results of analysis of the errors introduced by hot-band transitions 11¹0-01¹1, 03¹0-01¹1, 12⁰0-12⁰1 of the CO₂ molecule and the absorption lines of the H₂O and NO₂ molecules in determination of the temperature and partial pressure of CO₂, included in the gas mixture CO₂: N₂:H₂O: NO₂ at atmospheric pressure, by multiple-frequency laser probing using a CO₂ laser tunable over the lines of the 00⁰1-[10⁰0,02⁰0]_I,II ground-state laser transitions. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 6, pp. 810–815, November–December, 2007.     

Spectral and kinetic characteristics of CdI<Subscript>2</Subscript> and CdI<Subscript>2</Subscript>:Pb scintillators

We have studied the effect of lead dopant on the optical absorption, photoluminescence, and x-ray luminescence spectra, and the scintillation characteristics of CdI₂ at room temperature. The crystals for the study were grown by the Stockbarger-Bridgman method. Activation of CdI₂ from the melt by the compound PbI₂ leads to the appearance in the absorption spectra in the near-edge region of an activator band at 395–405 nm, which is interpreted as an A band connected with electronic transitions from the ¹S₀ state to the ³P₁ levels in the Pb²⁺ ion. For x-ray excitation, CdI₂:Pb²⁺ crystals with optimal dopant concentration (∼1.0 mol%) are characterized by a light yield with maximum in the 570–580 nm region that is an order of magnitude higher than for CdI₂ crystals in the 490–500 nm band. For α excitation, the radioluminescence kinetics for cadmium iodide is characterized by a very short (∼0.3 nsec) rise time and fast decay of luminescence, with τ₁ ≈ 4 nsec and τ₂ = 10–76 nsec. Depending on the conditions under which the crystals were obtained, the fast component fraction is 95%–99%. The crystal is characterized by a similar scintillation pulse in the case of excitation by x-ray pulses. The radioluminescence pulse shape for CdI₂:Pb in the decay stage is predominantly exponential, with luminescence decay time constants τ₁ ≈ 10 nsec and τ₂ = 200–250 nsec. This system is characterized by low afterglow, at the level for the Bi₄G₃O₁₂ scintillator. We have demonstrated the feasibility of using CdI₂:Pb as a scintillator for detecting α particles. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 75, No. 6, pp. 825–830, November–December, 2008.     

Absorption by CS<Subscript>2</Subscript> molecules on “hot” band emission lines from a TEA CO<Subscript>2</Subscript> laser

We have measured absorption of emission from a TEA CO₂ laser, lasing on hot band lines, in pure CS₂ and a mixture of CS₂ with air, and we have determined the optimal lines for optical excitation. Numerical modeling has shown that as the peak intensity of the pump radiation is increased, we observe absorption saturation, the extent of which decreases as the pressure increases. The major factor responsible for absorption saturation is the “rotational bottleneck” effect. Depending on the peak intensity of the radiation, addition of a buffer gas can lead to an increase or decrease in the absorption. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 1, pp. 61–66, January–February, 2007.     

Search for an interstellar Si<Subscript>2</Subscript>C molecule: A theoretical prediction

We suggest that Si₂C molecule may be identified in astronomical objects through its transitions 4₁₄ → 5₀₅, 5₁₅ → 6₀₆, 2₁₂ → 3₀₃, 3₁₃ → 4₀₄, and 1₁₁ → 2₀₂ at 15.9, 5.1, 33.6, 24.9, and 42.3 GHz in absorption even against the cosmic 2.7 K background, in a region having low temperature. The absorption phenomenon is found rather large in the first two transitions. Dependence of results on the set of molecular parameters is discussed.     

Investigation on structural characteristics of PVDF–AgCF<Subscript>3</Subscript>SO<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocomposite solid polymer electrolyte system

There has been an increasing interest towards the incorporation of nanosize ceramic fillers in polymer electrolytes. Solid polymer electrolytes based on polyvinylidene fluoride (PVDF), silver triflate (AgCF₃SO₃), and x wt% of aluminum oxide (Al₂O₃) nanopowders (where x = 1, 3, 5, and 10, respectively) have been prepared using solution casting technique. The structural characteristics of these thin film specimens were studied using Fourier transform infrared (FTIR) and X-ray diffraction (XRD) patterns at room temperature. The appearance of new absorption bands and gradual shifts observed in some characteristic peaks confirmed the complex formation between polyvinylidene fluoride and silver triflate. Furthermore, the addition of nanosized filler Al₂O₃ has also indicated the interaction of the filler with the polymer salt complex. The XRD patterns obtained for all these samples in the 2θ range 10° to 70° showed the amorphous nature of these samples. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, December 7–9, 2006.     

Study of structural phase transitions in YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>6+δ</Subscript> by x-ray photoelectron spectroscopy

We have used x-ray photoelectron spectroscopy to investigate the charge state of oxygen found in the basal structural plane of YBa₂Cu₃O₆+γ.. We have observed a change in this state after thermal treatment, with a transition to the adjacent structural phase region. We have shown that changes in the charge state of oxygen can be used as an indicator of structural changes occurring in YBa₂Cu₃O₆+δ.. We have found that the rate of structural relaxation yttrium barium cuprate depends on the amount of structural water it contains. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 2, pp. 195–198, March–April, 2007.     

Preparation of TiO<Subscript>2</Subscript>-coated LiCo<Subscript>1/3</Subscript>Ni<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> by electrostatic self-assembly method and its properties

A precursor of TiO₂–LiCo_1/3Ni_1/3Mn_1/3O₂ was prepared by electrostatic self-assembly method. The final product was obtained by heating the precursor at 400–450 °C for 4–6 h in air. X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and electrochemical tests were used to examine the structural, morphology, elementary valence, and electrochemical characteristics. XRD indicated that the TiO₂-coated material can be indexed by α-NaFeO₂ layered structure, which belongs to hexagonal-type space group R3m. XPS results confirmed the existence of TiO₂ compound on the surface of the coated sample. The SEM image showed that the material had spherically porous morphology with the uniform size about 6 μm. The initial charge–discharge capacity of the TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ material was 168.8/160.0 mAh/g. After 60 cycles, the discharge capacity of the TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ sample was 147.0 mAh/g, and the coulombic efficiency was 94.0%. Compared with the uncoated sample, the electrochemical performance of TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ was improved.     

Hyperfine structure in EPR spectra of the catalytic system TiCl<Subscript>4</Subscript> + Al(i-C<Subscript>4</Subscript>H<Subscript>9</Subscript>)<Subscript>3</Subscript>

In an EPR study of the catalytic system TiCl₄ + Al(i-C₄H₉)₃ in toluene and isopentane in TiCl₄/oligopiperylene + Al(i-C₄H₉)₃ in toluene, we have observed a dependence of the linewidth of the hyperfine structure on the mobility of the complex in solution. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 2, pp. 174–177, March–April, 2007.     

Structural investigation on PEO-based polymer electrolytes dispersed with Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles

Thin solid polymer electrolytes based on polyethylene oxide (PEO) and silver triflate (AgCF₃SO₃) dispersed with various concentrations of aluminum oxide (Al₂O₃) nanoparticles have been prepared by solution casting technique. These thin polymer films are found to have thickness of the order of 30 to 100 μm. The X-ray diffraction (XRD) patterns have indicated the amorphous nature of the polymer electrolyte. The differential scanning calorimeter (DSC) traces showed slight change in the glass transition temperature (T _g) whereas the degree of crystallization (X _c) decreases markedly due to the addition of alumina nanoparticles. Fourier transform infrared (FTIR) spectral analysis of all these samples has revealed the presence of absorption bands around 1,000 cm⁻¹; thus indicating the complexation of silver ions with oxygen in PEO. Employing the Wagner’s polarization technique as the standard method, the total ionic transference number for the complexed polymer electrolyte was found to be approximately unity thereby revealing that the significant contribution to electrical conduction was due to ions only. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, December 7–9, 2006     

Luminescence of CaGa<Subscript>2</Subscript>Se<Subscript>4</Subscript>:Eu crystals

We have studied photoluminescence and thermoluminescence (PL and TL) in CaGa₂Se₄:Eu crystals in the temperature range 77–400 K. We have established that broadband photoluminescence with maximum at 571 nm is due to intracenter transitions 4f⁶ 5d–4f⁷ (⁸S_7/2) of the Eu²⁺ ions. From the temperature dependence of the intensity (log I–10³/T), we determined the activation energy (E _a = 0.04 eV) for thermal quenching of photoluminescence. From the thermoluminescence spectra, we determined the trap depths: 0.31, 0.44, 0.53, 0.59 eV. The lifetime of the excited state 4f6 5d of the Eu²⁺ ions in the CaGa₂Se₄ crystal found from the luminescence decay kinetics is 3.8 μsec. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 76, No. 1, pp. 112–116, January–February, 2009.     

Frequency measurements in the b <Superscript>3</Superscript>Π(0<Subscript>u</Subscript><Superscript>+</Superscript>) - X <Superscript>1</Superscript>Σ<Subscript>g</Subscript><Superscript>+</Superscript> system of K<Subscript>2</Subscript>

Absolute transition frequencies of the b ³Π(0_u ⁺) - X ¹Σ_g ⁺ system of K₂ were measured in a molecular beam with Lamb dip absorption spectroscopy applying a frequency comb from a femtosecond pulsed laser. Both, K atoms and K₂ molecules are present in the beam and are expected to interact by collisions. The atoms can be deflected optically out of the beam, and thus the collision rate between K atoms and K₂ molecules is changed by about an order of magnitude. The molecular transition frequencies for low collisional rate are compared with those for high one. Limits for the collisional frequency shift within the beam are determined.     

Up-conversion emissions of Er<Superscript>3+</Superscript>-Yb<Superscript>3+</Superscript> codoped Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles by the arc discharge synthesis method

The Er³⁺-Yb³⁺ codoped Al₂O₃ nanoparticles with an average particle size of about 50 nm have been synthesized by an arc discharge synthesis method. The green and red up-conversion emissions centered at about 526, 547 and 677 nm, corresponding respectively to the ²H_11/2→⁴I_15/2, ⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 transitions of Er³⁺, were detected by a 978-nm semiconductor laser diode excitation. The Annealing has evident effect on the up-conversion emissions of the samples: The red up-conversion emission is noticeable before annealing; however, the green up-conversion emission becomes predominant after annealing. The mixture of (Er,Yb)₃Al₅O₁₂ and α-(Al,Er,Yb)₂O₃ phases is more favorable for green up-conversion emissions due to an enhancement of the ESA (I) of ⁴I_11/2+a photon→⁴F_7/2 and ET (III) of ²F_5/2(Yb³⁺)+⁴I_11/2(Er³⁺)→²F_7/2(Yb³⁺)+⁴F_7/2(Er³⁺) processes. The two-photon absorption up-conversion process is involved in the green and red up-conversion emissions. The results have proved that arc discharge synthesis is a new promising preparation technology for optical materials. Supported by National Natural Science Foundation of China (Grant No. 10804015), the Scientific Research Foundation for Doctor of Liaoning Province (Grant No. 20071095), and the Educational Committee Foundation of Liaoning Province (Grant No. 2008123)     

Synthesis and characterization of electron beam evaporated LiCoO<Subscript>2</Subscript> thin films

LiCoO₂ thin films were prepared by electron beam evaporation technique using LiCoO₂ target with Li/Co ratio 1.1 in an oxygen partial pressure of 5 × 10⁻⁴ mbar. The films prepared at substrate temperature T _s < 573 K were amorphous in nature, and the films prepared at T _s > 573 K exhibited well defined (104), (101), and (003) peaks among which the (104) orientation predominates. The X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma (ICP) data revealed that the films prepared in the substrate temperature range 673–773 K are nearly stoichiometric. The grain size increases with an increase of substrate temperature. The Co–e_g absorption bands, are empty and their peak position lies at around 1.7 eV above the top to the Co–t_2g bands. The fundamental absorption edge was observed at 2.32 eV. The films annealed at 1,023 K in a controlled oxygen environment exhibit (104) out plane texture with large grains. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006     

On the determination of the potential functions of H<Subscript>2</Subscript>Co,PH<Subscript>3</Subscript>, and CH<Subscript>4</Subscript> molecules based on experimental data

In the present work, a method of determining multidimensional potential surfaces of polyatomic molecules is suggested. The method is based on the use of high-accuracy data on the vibrational-rotational band centers and results of vibrational-rotational theory. Results of application of the method to the CH ₄, PH₃, AsH₃, and H ₂CO molecules are presented. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 2, pp. 58–63, February, 2008.     

High-resolution cavity ring-down spectroscopy measurements of blended H<Subscript>2</Subscript>O transitions

We probed four closely spaced rovibrational water vapor absorption transitions near =7100 cm^-1 using frequency-stabilized cavity ring-down spectroscopy. Room-temperature spectra were acquired for pure water vapor in the Doppler limit and for mixtures containing ≈6.6 μmol mol^-1 of water vapor in N₂ at total gas pressures ranging from 6.5 kPa to 53 kPa. By measuring Lamb dips for each transition, we demonstrated a resolution of 50 kHz and determined relative transition frequencies with an uncertainty <0.4 MHz over a 10 GHz range. Pressure-induced broadening, collisional narrowing coefficients of the component transitions and line areas were retrieved by fits of model line shapes to the measured spectra. Standard and advanced models were considered including those which incorporated the combined effects of collisional narrowing and speed-dependent line broadening and line shifting. By measuring water vapor concentration with a transfer standard hygrometer, we determined line intensities in terms of measured line areas with a combined relative uncertainty of 0.6%. PACS 33.20.-t; 33.70.Jg; 33.70.Fd; 42.62.Fi     

Einstein<Emphasis Type="Italic">A</Emphasis>-coefficients for rotational transitions in the ring-chain isomer of C<Subscript>5</Subscript>H<Subscript>2</Subscript>

Laboratory formation of four isomers of C⁵H² molecule is reported and detection of the ring-chain isomer (isomer 1) of C₅H₂ in cosmic objects has been suggested. For identification of a molecule in cosmic objects, one of the required input data is EinsteinA-coefficients (radiative transition probabilities) for the molecule. Here, we report EinsteinA-coefficients for electric dipole transitions in the ring-chain isomer of C₅H₂ among the rotational levels of the ground electronic and ground vibrational states up to 21 cm⁻¹.     

Characterization of Y<Subscript>2</Subscript>BaCuO<Subscript>5</Subscript> nanoparticles synthesized by nano-emulsion method

Nanoscale yttrium–barium–copper oxide (Y₂BaCuO₅, Y211) particles were synthesized using the emulsion method and the solution method. The basic water-in-oil (w/o) emulsion system consisted of n-octane (continuous oil phase), cetyltrimethylammonium bromide (cationic surfactant), butanol (cosurfactant) and water. The composition of the emulsion system was varied and characterized by measuring the conductivity of the solutions and droplet size. The droplet size of emulsion was determined by using the dynamic light scattering method. The water content, cosurfactant content, and surfactant/n-octane ratio affected the droplet size which was in the range of 3–8 nm, and hence the w/o emulsion system was referred to as a nano-emulsion system. A model was used to verify the droplet size. The influence of salt (Y₂(NO₃)₃) content on the droplet size was investigated and the addition of salt reduced the droplet size. The effects of reaction time and temperature on the Y211 particle sizes were also investigated. The particles were characterized using the TEM, SEM, and XRD. Nanoparticles produced by the nano-emulsion method were calcined at 850°C to form the Y211 phase as compared to solid state processing temperature of 1050°C. Based on the TEM analysis, the average diameter of the Y211 particles produced using the nano-emulsion method was in the range of 30–100 nm. The effect of adding 15% Y211 nanoparticles to the superconductor YBCO-123 as flux pinning centers, was investigated, and the transition temperature was reduced by 3 K.     

Thermal and optical properties of Tm<Superscript>3+</Superscript>:NaLa(WO<Subscript>4</Subscript>)<Subscript>2</Subscript> crystal

A Tm³⁺-doped NaLa(WO₄)₂ single crystal with a dimension of Φ20 mm×40 mm was grown by the Czochralski method. Anisotropic thermal expansion coefficients of this crystal were investigated. Polarized absorption spectra, emission spectra and decay curve were recorded at room temperature. The absorption and emission cross-section were presented. Based on the Judd–Ofelt analysis, we obtained the three intensity parameters: Ω₂=10.21×10^-20, Ω₄=2.66×10^-20, and Ω₆=1.46×10^-20 cm². The radiative probabilities, radiative lifetimes, and branch ratios of Tm³⁺:NaLa(WO₄)₂ were calculated, too. Luminescence lifetime of the ³ H ₄ level was measured to be 220 μs. The stimulated emission cross-section for the ³ F ₄→³ H ₆ transition were determined using the reciprocity method, potential laser gain for this transition were also investigated, the gain curves implied that the tunable range is up to 200 nm. PACS 42.70.Hj; 78.20.-e     

Anti-stokes luminescence of Zn<Subscript>0.6</Subscript>Cd<Subscript>0.4</Subscript>S solid solutions with adsorbed organic dye molecules and few-atom silver clusters

For microcrystals of Zn_0.6Cd_0.4S with adsorbed molecules of a number of organic dyes, we have observed sensitized anti-Stokes luminescence excited by radiation with wavelengths in the range 610–750 nm and flux density 10¹⁴–10¹⁵ photons/cm²·sec. The positions of the bands in the excitation spectra for such luminescence match those of the absorption spectra for the adsorbed dye molecules, which is evidence in favor of a cooperative mechanism for its appearance. We have shown that enhancement of the anti-Stokes luminescence is possible when silver atoms and few-atom clusters appear on the Zn_0.6Cd_0.4S surface in addition to the dye molecules. We hypothesize that its excitation in the latter case occurs as a result of two-photon optical transitions. These transitions occur sequentially, with transfer of an electron or the electronic excitation energy from the dye molecules to silver atoms and few-atom clusters adsorbed on the surface of Zn_0.6Cd_0.4S, creating deep localized states in the bandgap with photoionization energies 1.80–2.00 eV. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 5, pp. 617–621, September–October, 2007.     

EPR and optical absorption studies of Cu<Superscript>2+</Superscript> ions in [ZnPd(CN)<Subscript>4</Subscript>(C<Subscript>4</Subscript>H<Subscript>12</Subscript>N<Subscript>2</Subscript>O<Subscript>2</Subscript>)] single crystals

A Cu²⁺-doped single crystal of catena-trans-bis(N-(2-hydroxyethyl)-ethylenediamine) zinc(II)-tetra-m-cyanopaladate(II) [ZnPd(CN)₄(C₄H₁₂N₂O₂)] complex has been investigated by electron paramagnetic resonance (EPR) technique at room temperature. EPR spectra indicate that Cu²⁺ ions substitute for magnetically equivalent Zn²⁺ ions and form octahedral complexes in [ZnPd(CN)₄(C₄H₁₂N₂O₂)] hosts. The crystal field affecting the Cu²⁺ ion is nearly axial. The optical absorption studies show two bands at 322 nm (30864 cm⁻¹) and 634 nm (15337 cm⁻¹) which confirm the axial symmetry. The spin Hamiltonian parameters and the relevant wave function are determined.