Negishi cross-coupling of arenediazonium o-benzenedisulfonimides

Diazonium salts, precisely arenediazonium o-benzenedisulfonimides, have been used for the first time as efficient electrophilic partners in Negishi coupling reactions. The synthetic protocol was general, easy and gave biaryls in satisfactory yields (34 examples, average yield 69%). o-Benzenedisulfonimide was recovered at the end of the reactions and reused to prepare the starting salts once again.     

Reaction of diazonium salts with transition metals—III: Palladium(0)-catalyzed arylation of unsaturated compounds with arenediazoium salts

Palladium (0) catalyzed reactions of arenediazonium salts for arylation of aliphatic and cyclic olefins and allylic alcohols, styrene and ethyl acrylate were studied. Effects of the olefinic compounds and other reaction variables on the arylation were presented. Arylpalladium species was proposed as the most plausible intermediated in this reaction.     

Investigation of the behavior of arenediazonium salts with olefins in BmimPF6

The palladium-catalyzed reactions of olefins with arenediazonium salts in ionic liquids were investigated. For methyl acrylate and methyl acrylonitrile, normal Heck cross-coupling products are obtained in good yields. However, highly selective dimerization products are formed in excellent yields for styrenes. The catalyst system can be recycled.     

Pd-catalyzed cross-coupling reactions of arenediazonium salts with arylsilanes and aryltrifluoroborates in water

Pd-catalyzed cross-coupling reactions of various arenediazonium salts with ArSi(OR)₃ and KArBF₃ have been achieved in good to excellent yields under simple aerobic conditions in water at room temperature. The functional group tolerance makes these transformations as attractive alternatives to the traditional cross-coupling approaches. Furthermore, the sequence can also be performed in a one-pot domino process, omitting the isolation of the intermediate arenediazonium salt.     

Polyaniline‐Induced CH Arylation of Arenes with Arenediazonium Salts

A reduced form of polyaniline has been shown to induce direct arylation of an arenediazonium salt with an arene (Gomberg–Bachmann reaction) to give the cross‐coupling product in moderate to good yields under mild conditions. Various arenediazonium salts and arenes, including heteroarenes such as furans, thiophenes, and pyrroles, are employed for the reaction. The most favorable combination of substrates is an electron‐poor arenediazonium salt with an electron‐rich heteroarene. Investigation of the mechanism by reactions with radical scavengers and experiments on kinetic isotope effects indicated the occurrence of a radical chain reaction initiated by one‐electron reduction of an arenediazonium salt by the polyaniline. Only 1 mol % (based on aniline tetramer) of the polyaniline is required for the cross‐coupling reaction to occur. This reaction proceeds under metal‐free conditions and with no need for photonic activation.     

Chiral N,N Ligands Enabling Palladium‐Catalyzed Enantioselective Intramolecular Heck–Matsuda Carbonylation Reactions by Sequential Migratory and CO Insertions

Unprecedented enantioselective intramolecular Heck carbonylation reactions of arenediazonium salts were enabled by a chiral N,N ligand. This reaction constitutes the first enantioselective Heck carbonylation that proceeds through migratory insertion followed by CO insertion. The enantioenriched functionalized dihydrobenzofurans were obtained in good to high yields and enantiomeric ratios of up to 98:2 under mild and operationally simple reaction conditions.     

Coated-wire organic ion-selective electrodes in titrations based on ion-pair formation : Determination of arenediazonium salts with sodium tetraphenylborate

Titrimetric determinations of arenediazonium salts can be based on ion-pair formation between the diazonium cation and tetraphenylborate. Titrations are done under cooling with ice and are followed potentiometrically with organic ion-selective electrodes comprising PVC membranes plasticized with polar solvents and coated on aluminium wires. The method was tested in determinations of arenediazonium salts derived from 20 aromatic amines, including aniline, toluidines, naphthylamines and their derivatives. Except for compounds containing hydrophylic groups such as —COOH and —OH, the potentiometric titration curves have well defined end-points. The results are reproducible, with relative standard deviations in the range 0.4–1.4% at the millimolar level. The method can be used for reliable determinations of arenediazonium salts in analytical control of azo dyestuff production.     

Suzuki-Miyaura cross-couplings of arenediazonium tetrafluoroborate salts with arylboronic acids catalyzed by aluminium hydroxide-supported palladium nanoparticles

Suzuki-Miyaura cross-couplings of arenediazonium salts with arylboronic acids catalyzed by highly active aluminium hydroxide-supported palladium nanoparticles catalyst have been investigated for the first time. The reactions are performed at 25 °C in MeOH without any base and ligand to afford biaryls in good to excellent yields under non-anhydrous and non-degassed conditions.     

Copper-Free Halodediazoniation of Arenediazonium Tetrafluoroborates in Deep Eutectic Solvents-like Mixtures

Deep Eutectic Solvent (DES)-like mixtures, based on glycerol and different halide organic and inorganic salts, are successfully exploited as new media in copper-free halodediazoniation of arenediazonium salts. The reactions are carried out in absence of metal-based catalysts, at room temperature and in a short time. Pure target products are obtained without the need for chromatographic separation. The solvents are fully characterized, and a computational study is presented aiming to understand the reaction mechanism.     

Palladium-catalyzed homocoupling of arenediazonium salts: an operationally simple synthesis of symmetrical biaryls

A simple procedure for the intermolecular homocoupling of arenediazonium salts in air using a catalytic amount of palladium acetate is described. The optimum conditions were found to be 15 mol % palladium acetate in refluxing methanol, with no additional terminal reducing agent required. These optimized conditions were used to prepare biaryls from several arenediazonium tetrafluoroborate salts, and most examples proceeded in moderate to high yields.     

Alkyl- and arylthiodediazoniations of dry arenediazonium o-benzenedisulfonimides. Efficient and safe modifications of the stadler and ziegler reactions to prepare alkyl aryl and diaryl sulfides

The reaction between dry arenediazonium o-benzenedisulfonimides 1 and sodium thiolates in anhydrous methanol represents an efficient and safe procedure, of general validity, for the preparation of unfunctionalized or variously functionalized alkyl aryl and diaryl sulfides. As a rule, the reaction temperature was maintained at 0-5 degrees C for the alkylthiodediazoniations and at room temperature (20-25 degrees C) for the arylthiodediazoniations. The sulfide yields are generally high; of the 63 considered examples, 43 gave yields greater than 80% and 13 were between 70% and 80%. Lower yields were obtained only when sterically hindered diazonium salts or thiols were used. A good amount of the o-benzenedisulfonimide (8) was always recovered from the reactions and could be reused to prepare salts 1. The copious experimental data collected in homogeneous conditions have offered several starting points for the study of the mechanism of these reactions.     

苯基重氮盐-冠醚分子嵌合物的FAB-MS及其准分子离子生成机理的研究

Fast atom bombardment mass spectra of a series of arenediazonium salts with various substituents complexed with 18-crown-6 and dibenzo-24-crown-8 ethers were examined. The correlation between quasi-molecular ion abundance of various complexes and the properties, coordination ability of donor-acceptor linkages in the complexes were studied. By using molecular orbital calculation we have successfully demonstrated that the correlation cited is related to the electron cloud densities on the heteroatoms α-N and β-N of arenediazonium salts.     

Efficient and economic halogenation of aryl amines via arenediazonium tosylate salts

Arenediazonium tosylate salts have been successfully employed as a new and efficient reagent in halogenation reactions. A novel and economic protocol has been developed for the bromination and chlorination of various anilines using arenediazonium tosylate salts. A wide variety of reaction conditions were studied in acetonitrile at either room temperature or 60 °C in the presence or absence of catalyst with good to excellent yields. A surprising result showed the formation of acetanilides as a major product of aniline and methyl-substituted aniline halogenations in high yields.     

An expeditious and environmentally benign preparation of aryl halides from aryl amines by solvent-free grinding

An efficient solvent-free methodology for conversion of various aryl amines into bromides and chlorides via arenediazonium tosylate salts under grinding conditions is disclosed. This new methodology not only avoids the use of strong acids and expensive reagents for diazotization-halogenation reactions, but also decreases the amount of organic waste from the reaction process.     

Ion-selective electrodes in titrations involving azo-coupling reactions: Part 5. Determination of arenediazonium salts of ampholytic character

Determination of arenediazonium salts (0.3–0.7 g) of ampholytic character is based on their reaction with 1-phenyl-3-methyl-5-pyrazolone, the excess of which is titrated with a 4-bromo-1-naphthalenediazonium chloride solution. The titration is monitored potentiometrically with a PVC membrane electrode plasticized with 2,4-dinitrophenyl n-octyl ether. Eight arenediazonium salts containing hydrophilic groups (e.g., carboxylic and sulfonic acids) were determined without systematic errors.     

Palladium catalyzed Heck reaction of arenediazonium tetrafluoroborate salts with Baylis-Hillman adducts: production of α-benzyl-β-keto esters

A novel experimental procedure to obtain α-benzyl-β-keto esters from the Heck reaction between arenediazonium tetrafluoroborate salts and Baylis-Hillman (BH) adducts in the presence of Pd(OAc)₂ as catalyst is described. The methodology is simple, straightforward and the use of arenediazonium salts as opposed to conventional arylhalides/triflates over the usual Heck reaction is highlighted.     

Mechanism of Meerwein arylation of furan derivatives

Catalytic arylation of furan-2-carbaldehyde with arenediazonium salts was studied. The yields of 5-arylfuran-2-carbaldehydes were found to depend on the solvent, catalyst, and anion in the arenediazonium salt. Redox catalysis and generation of aryl radicals are not sufficient conditions for the reaction to occur. The reaction is successful only under conditions ensuring formation of complex intermediates. A mechanism involving two Cu²⁺ ? Cu⁺ catalytic series and generation of furan-2-carbaldehyde was proposed.     

Versatile and facile synthesis of diverse semisynthetic tetracycline derivatives via Pd-catalyzed reactions

A diverse collection of tetracycline derivatives has been synthesized utilizing Heck, Suzuki, and other palladium-coupling reactions via tetracycline arenediazonium and iodoarene salts. Large numbers of tetracyclines are now possible via these reactions, including numerous upper periphery derivatives of doxycycline, minocycline, sancycline, and methacycline modified at positions C7, C9, and C6-C13 on the tetracycline naphthacene ring. Application of palladium-coupling reactions to the tetracyclines has yielded new tetracycline classes with differing structural attributes, greatly increasing the structural diversity of this family of antibiotics, one of the last of the early antibiotic families to be expanded by organic and medicinal chemistry.     

Intermolecular Olefin Functionalisation Involving Aryl Radicals Generated from Arenediazonium Salts

This minireview is aimed at giving an overview of recent advances in olefin functionalisation reactions involving aryl radicals generated from arenediazonium salts. Based on the well‐known Meerwein arylation, in which an aryl and a halogen substituent are coupled to an olefinic substrate, new reaction types have been developed that allow the introduction of a broad spectrum of other atoms and functional groups at the place of the original halogen atom and that are applicable to an extended range of olefinic substrates.     

2-Oxo-2,3-dihydroimidazo[2,1-a]isoquinoline and its transformations

2-Oxo-2,3-dihydroimidazo[2,1-a]isoquinoline (I) was synthesized by the action of -haloacetic acids on 1-aminoisoquinoline esters. The reactions of I with nitrous acid, acylating agents, aromatic aldehydes, p-nitrosodimethylaniline, and arenediazonium salts were studied. 3,3-Dihalo derivatives of this system with high reactivities of the halogen atoms were obtained.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 12, pp. 1666–1671, December, 1976.