卤代苯与水分子间作用的从头算

污染是科学家关注的热点问题,化学污染物是造成水污染的重要因素［１］．在水环境中,卤代苯是一类优先污染物（ｐｒｉｏｒｉｔｙｐｏｌｕｔａｎｔｓ）［２］．这类污染物毒性大,在环境中的半衰期长,美国环保局（ＥＰＡ）已经把它们列入优先污染物之列．Ｖｅｒｓｃｈｎ...     

苯分子在Cu(100)面平板模型上吸附的密度泛函理论研究

使用量子化学中的密度泛函理论和平板周期模型方法，研究了苯在Cu(100)面上的吸附方式和相对稳定性. 计算结果表明，苯在Cu(100)表面的吸附属于较强的化学作用，稳定性穴位优于桥位，顶位吸附最不稳定. 在吸附过程中，C—C键有相对大的伸长，C—H键的键长变化较小，但是偏离苯环平面，并背离固体表面，顶位则是朝向表面. 吸附过程中，发生了电子从苯向铜原子的转移.     

含1,3-方酸苯螺旋共轭分子的设计及其电子光谱和非线性光学性质的理论研究

以量子化学半经验方法PM3优化构型为基础,利用INDO/CI方法研究了嵌入1,3-方酸的苯螺旋共轭分子的电子光谱,同时利用INDO/CI-SOS程序计算了它们的二阶非线性光学系数β_ijk和β_μ值,从而探索分子结构与电子光谱及非线性光学性质的关系.理论计算结果表明:在苯螺旋共轭分子中适当地嵌入方酸后,其二阶非线性光学系数增大.与苯螺旋共轭分子和1,3-方酸的比较表明,方酸环处于左端的体系有很好的二阶非线性光学性质,可能成为较好的光学材料.     

苯在Ag(100)表面吸附的周期性密度泛函理论研究

 采用量子化学中的密度泛函理论结合平板周期模型方法,研究了苯在Ag(100)面上的吸附方式和相对稳定性. 通过对不同吸附位置的吸附能和几何构型参数的比较发现,苯在Ag(100)表面的吸附属于较强的化学作用,穴位吸附的稳定性优于桥位,顶位吸附最不稳定. 吸附的苯分子的平衡构型发生扭曲, C-C键有较大程度的伸长; C-H键的键长基本不变,但是偏离苯环平面,并背离Ag(100)表面. 在吸附过程中,电子由苯向表面银原子转移. 本文给出了详细的轨道示意图和电荷布居分析,并且与相关的实验和理论研究结果进行了比较.     

Adsorption-induced desorption of benzene on Si(111)-7 x 7 by substrate-mediated electronic interactions

The process of benzene adsorption on an adjacent adatom-rest atom pair on Si(111)-7 x 7 at room temperature was studied using in-situ scanning tunneling microscopy (STM). Both adsorption and desorption of benzene were observed to take place mostly at adjacent sites during the process. DFT calculation results show that the bond length between the rest atom and the carbon atom in a pre-adsorbed benzene molecule increases due to the charge transfer from a neighboring rest atom in response to an approaching benzene molecule. Such increase in the bond length, when coupled resonantly to the C-Si thermal vibration, could result in bond breakage and desorption of the adsorbate. The studies provide evidence for the desorption of a chemisorbed benzene caused by an adsorbing benzene at a neighboring site through a substrate-mediated electronic interaction.     

苯在Si(111)-7*7表面化学吸附的理论研究

采用两种大小不同的原子簇模型Si_(30)H_(28)和Si_(13)H_(16),分别用两层 ONIOM方法（对较大原子簇）和普通量子化学方法（对较小原子族）考察了苯分子 在Si(111)-7 * 7表面的化学吸附。对三种可能的吸附物种分别用DFT或HF方法进行 了计算。通过大小原子簇吸附物种的吸附能以及几何构型优化参数的比较发现,对 于稳定的吸附物种,较小的原子簇基本上可以代替较大的原子簇进行计算,而对于 不太稳定的吸附物种,就不得不考虑周边原子的影响。计算结果表明苯在Si(111)- 7 * 7表面的主要吸附种是双σ成键的1,4加成产物,不稳定的单吸附物种可能是 1,4加成物种的前驱态。     

The neutral exciton model for triplet factor-group splittings in aromatic crystals

The calculation of triplet factor-group splitting in benzene, naphthalene and anthracene crystals has been reexamined. Substantially revised values of the two-centre exchange integrals in the neutral exciton model give much improved agreement with experiment in benzene; the need for refinements such as ion-pair contributions is marginal. In naphthalene and anthracene the new values are little altered. Thus, in benzene and naphthalene the neutral exciton model appears to be adequate; in anthracene the previously noted disagreement with experiment remains.Multicentre intermolecular integrals can be neglected in the examples studied, and are unlikely to be important in other aromatic crystals.     

Theoretical studies on cation-π interactions (I)——Density-functional theory investigation on the configurations and interaction for ammonium cation-benzene complex

Ｎｏｎｃｏｖａｌｅｎｔｉｎｔｅｒａｃｔｉｏｎｓｐｌａｙａｄｏｍｉｎａｎｔｒｏｌｅｉｎｄｅｔｅｒｍｉｎｉｎｇｔｈｅｓｔｒｕｃｔｕｒｅｓａｎｄｆｕｎｃｔｉｏｎｓｆｏｒｂｉｏｌｏｇｉｃａｌｍａｃｒｏｍｏｌｅｃｕｌｅｓ.Ｆｏｒｅｘａｍｐｌｅ,ｌｉｇａｎｄｒｅｃｅｐｔｏｒｉｎｔｅｒａｃｔｉｏｎ,ｅｎｚｙｍｅｓｕｂｓｔｒａｔｅｂｉｎｄｉｎｇａｎｄａｎｔｉｇｅｎａｎｔｉｂｏｄｙｒｅｃｏｇｎｉｔｉｏｎａｒｅａｌｌｒｅｌａｔｅｄｔｏｔｈｅｎｏｎｃｏｖａｌｅｎｔｉｎｔｅｒａｃｔｉｏｎｓ[1].Ｃｏｍｐａｒｅｄｔｏｔｈｅｍ…     

The intricacies of the stacking interaction in a pyrrole–pyrrole system

Extensive calculations of potential energy surfaces for parallel-displaced configurations of pyrrole–pyrrole systems have been carried out by the use of a dispersion-corrected density functional. System geometries associated with the energy minima have been found. The minimum interaction energy has been calculated as ?5.38 kcal/mol. However, bonding boundaries appeared to be relatively broad, and stacking interactions can be binding even for ring centroid distances larger than 6 Å. Though the contribution of the correlation energy to intermolecular interaction in pyrrole dimers appeared to be relatively small (around 1.6 smaller than it is in a benzene–benzene system), this system’s minimum interaction energy is lower than those calculated for benzene–benzene, benzene–pyridine and even pyridine–pyridine configurations. The calculation of the charges and energy decomposition analysis revealed that the specific charge distribution in a pyrrole molecule and its relatively high polarization are the significant source of the intermolecular interaction in pyrrole dimer systems.     

Exciplex-type behavior and partition of 3-substituted indole derivatives in reverse micelles made with benzylhexadecyldimethylammonium chloride, water and benzene

The fluorescence properties of 3-methylindole (MI), 3-indoleacetic acid (IAA), 3-indoleethyltrimethylammonium bromide (IETA), L-tryptophan (Trp) and tryptamine hydrochloride (TA) were studied in reverse micelles solutions made with the cationic surfactant benzylhexadecyldimethylammonium chloride (BHDC) in benzene as a function of the molar ratio water/surfactant R (= [H2O]/[BHDC]). The fluorescence quenching of the model compound MI by benzene in cyclohexane solutions and by BHDC in benzene solutions were also studied in detail. The fluorescence of MI in benzene is characteristic of a charge-transfer exciplex. The exciplex is quenched by the presence of BHDC, due to the interactions of the surfactant ion pairs with the polar exciplex. In reverse micelle solutions at low R values, all the indoles show exciplex-type fluorescence. As R increases, the fluorescence behavior strongly depends on the nature of the indole derivative. The anionic IAA remains anchored to the cationic interface and its fluorescence is quenched upon water addition due to the increases of interface's micropolarity. For IETA, TA and Trp an initial fluorescence quenching is observed at increasing R, but a fluorescence recovery is observed at R > 5, indicating a probe partition between the micellar interface and the water pool. For the neutral MI, the fluorescence changes with R indicate the partition of the probe between the micellar interface and the bulk benzene pseudophase. A simple two-site model is proposed for the calculation of the partition constants K as a function of R. In all cases, the calculation showed that even at the highest R value, about 90% of the indole molecules remain associated at the micellar interface.     

Are most of the stationary points in a molecular association minima? Application of Fraga's potential to benzene–benzene

The importance of characterizing the stationary points of the intermolecular potential by means of Hessian eigenvalues is illustrated for the calculation of the benzene–benzene interaction using an atom-to-atom pair potential proposed by Fraga (FAAP). Two models, the standard one-center-per atom and another using three-centers-per atom due to Hunter and Sanders, are used to evaluate the electrostatic contributions and the results are compared. It is found in both cases that although using low-gradient thresholds allows optimization procedures to avoid many stationary points that are not true minima computing time considerations makes the usual procedure of using high-gradient thresholds [say, 10^?2 kj/(mol Å)] as the most efficient. Moreover, this later procedure can be recommended because the actual minima can be characterized by means of Hessian eigenvalues even if these high-gradient thresholds are used, and further decreasing of the convergence criterion does not imply significant modifications in the geometric parameters of the minima. The possible advantages of using the three-centers-per-atom model for the calculation of molecular associations between delocalized systems are also discussed on the basis of the agreement of the benzene–benzene results with experimental and theoretical data taken from the literature. © 1993 John Wiley & Sons, Inc.     

苯氰基衍生物气相HeI紫外光电子能谱研究

气相Hel（21．22eV）紫外光电子能谱（UPS）能从孤立分子的分子轨道特性上，给出研究分子的轨道能量、电子结构以及成键特性的大量信息．UPS谱的特性揭示了被电离分子轨道的成键性质，而量子化学计算能正确地指认UPS谱带的归属，从而化合物的UPS研究从分子轨道的属性上提供了研究体系的实验和理论基础．苯基腈（C6H5CN）的UPS已有过研究［1-3］，但作为系列分子的间-二氰基苯（1）、对-二氰基苯（2）、1；2，4，5-四氰基苯（3）的HeI光电子能谱未见报道．这一系列分子的特点是-CN取代的数目和位置不同，通过这些分子UPS的研究找…     

Ce离子对苯在Y分子筛上吸附扩散行为的影响

采用液相离子交换法制备了不同稀土含量的Y型分子筛(HY、USY和NaY),研究了稀土铈(Ce)阳离子在Y型分子筛上吸附-脱附烃类分子(苯)过程中的作用机理与影响。通过X射线荧光光谱仪(XRF)、智能质量分析仪(IGA)、脱附指数的计算和巨正则蒙特卡罗模拟计算等多种表征计算方法,对引入稀土物种后,Y型分子筛对苯的饱和吸附量、吸附作用力、脱附热力学参数、苯在Y分子筛上的吸附势能分布及扩散行为等方面进行了研究。结果表明,Ce离子对苯在Y分子筛上脱附活化能的降低、吸附作用力的减弱以及吸附态由团聚态向分散态转变等方面具有显著影响,该作用构成了CeY分子筛催化剂在流化催化裂化(FCC)过程中能够优化轻质产品选择性的重要因素。     

Full spectral decomposition of ring currents

Within the ipsocentric method for calculation of molecular magnetic response, projection of perturbed orbitals onto the virtual orbital space allows partition of induced current density into contributions from individual virtual excitations between occupied and unoccupied orbitals, enabling detailed assignment of the origin of currents in, e.g., benzene, cyclooctatetraene, borazine, coronene, and corannulene. Whereas delocalized currents in benzene and planar cyclooctatetraene are described by transitions within the valence space, localized currents in the borazine pi system involve excitations outside the valence space.     

Computational examination of the electrophilic reaction on oxidative polymerization of phenyltrimethylsilane with sulfur chloride

Phenyltrimethylsilane possesses a higher HOMO energy (–9.34 eV) than nonsubstituted benzene (>0.41 eV). The π electron of the phenyltrimethylsilane localizes on the benzene ring at the ipso position rather than at the para position. Two center energies calculated by the MNDO-PM3 method indicate that the C? Si bond is facilitated to cleave in comparison with the C? H (para position) one of the benzene ring. Phenyltrimethylsilane and phenyl bis(trimethylsilane) were polymerized with sulfur chloride through the cationic oxidative polymerization. The product is isolated as oligo(p-phenylene sulfide), with a melting point of 150–190°C. An electrophile attacks the carbon atom linked to the Si atom in phenyltrimethylsilane. The new synthetic route of PPS can be established on the basis of the computational calculation.     

Cluster expansion of the wavefunction. Ionization potentilals of benzene

The vertical and adiabatic ionization potentiais of benzene are studied by the cluster expansion of the wavefunction theory. The calculation confirms the assignment of the photoelectron spectrum experimentally proposed by Jonsson and Lindholm. The nature of the Jahn-Teller effect in states arising from ionization of doubly degenerate π and σ orbitals is also discussed.     

Statistical mechanics of a two-dimensional lattice model of benzene adsorption in zeolites

In this Letter, we present a mean field calculation of the statistical mechanics of a lattice model of benzene adsorption in the quasi two-dimensional network of pores in zeolites. A lattice fluid model is introduced with monomer states to represent molecules standing perpendicular to the principle axis of the pore, dimer states to represent molecules lying flat against the pore wall, and vacant sites or holes. For a wide range of interaction parameters the model gives steps in adsorption isotherms similar to those observed experimentally for benzene adsorption in silicalite. Our treatment attributes the experimentally observed steps in the level of adsorption with rising pressure, to orientational transitions amongst molecules in the adsorbed phase with two possible ground states arrangements of the benzene molecules in the zeolite pores energetically competing with each other.     

DFT方法研究酸性沸石上苯与乙烯烷基化反应的机理

采用B3LYP/6-31G*水平计算来研究酸性沸石上苯与乙烯的烷基化反应历程,从生成能和反应活化能角度分析并讨论了苯与乙烯的反应机理.选取4T簇模型模拟分子筛的酸性位,使用密度泛函理论对烷基化反应三种不同的反应机理(两个联合反应机理和一个分步反应机理)进行计算分析.结果表明,在联合反应机理中,乙烯的质子化和苯与乙烯间C-C键的形成同时发生;分步反应机理中,首先形成一个稳定的乙醇盐中间物种,然后与苯分子反应形成乙苯.联合机理速控步骤的活化能约为160kJ/mol,分步机理速控步骤的活化能为190.24kJ/mol,因此,酸性沸石上苯与乙烯烷基化反应机理主要以联合机理为主,但分步机理与其有一定程度的竞争。     

Computer simulation of solid and liquid benzene with an atomistic interaction potential derived from ab initio calculations

Molecular dynamics atomistic simulations of solid and liquid benzene have been performed, employing a model intermolecular potential derived from quantum mechanical calculations. The ab initio database includes approximately 200 geometries of the benzene dimer with interaction energies computed at the MP2 level of theory. The accuracy of the modeled force field results is satisfactory. The thermodynamic and structural properties, calculated in the condensed phases, are compared with experimental data and previous simulation results. Single particle and collective dynamical properties are also investigated through the calculation of translational and rotational diffusion coefficients, reorientational dynamics, and viscosities. The agreement of these data with experimental measurements confirms the reliability of the proposed force field.     

The calculation of the normal coordinates of molecular crystals using pairwise potential functions

A brief outline of a method for the calculation of the normal coordinates of molecular crystals in the entire Brillouin zone is presented. Some results on the lattice frequencies of crystalline benzene and naphthalene, calculated using pair potential functions, are presented as examples.