Templating α-helical poly(L-lysine)/polyanion complexes by nanostructured uniaxially oriented ultrathin polyethylene films

We report a templating effect of uniaxially oriented melt-drawn polyethylene (MD-PE) films on α-helical poly(L-lysine)/poly(styrenesulfonate) (α-PLL/PSS) complexes deposited by the layer-by-layer (LBL) method. The melt-drawing process induced an MD-PE fiber texture consisting of nanoscale lamellar crystals embedded in amorphous regions on the MD-PE film surface whereby the common crystallographic c axis is the PE molecular chain direction parallel to the uniaxial melt-drawing direction. The MD-PE film and the α-PLL/PSS deposit were analyzed by atomic force microscopy (AFM) and in situ attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) using polarized light as a complementary method. Both methods revealed that α-PLL/PSS complexes adsorbed at the MD-PE surface were anisotropic and preferentially oriented perpendicular to the crystallographic c direction of the MD-PE film. Quantitatively, from AFM image analysis and ATR-FTIR dichroism of the amide II band of the α-PLL, mean cone opening angles of 12-18° for both rodlike α-PLL and the anisotropic α-PLL/PSS complexes with respect to the PE lamellae width direction were obtained. A model for the preferred alignment of α-PLL along the protruding PE lamellae is discussed, which is based on possible hydrophobic driving forces for the minimization of surface free energy at molecular and supermolecular topographic steps of the PE surface followed by electrostatic interactions between the interconnecting PSS and the α-PLL during layer-by-layer adsorption. This study elucidates the requirements and mechanisms involved in orienting biomolecules and may open up a path for designing templates to induce directed protein adsorption and cell growth by oriented polypeptide- or protein-modified PE surfaces.     

Conformational changes of fibrinogen after adsorption

The adsorption behavior of fibrinogen to two biomedical polyurethanes and a perfluorinated polymer has been investigated. Changes in the secondary structure of adsorbed fibrinogen were monitored using attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and sum frequency generation vibrational spectroscopy (SFG). SFG measurements were performed in the amide I range as well as in the C-H/N-H stretching range. Amide I signals from SFG demonstrate that fibrinogen has post-adsorption conformational changes that are dependent upon the polymer surface properties. For example, strong attenuation of the amide I and N-H stretching signals with increasing residence time was observed for fibrinogen adsorbed to poly(ether urethane) but not for the other two polymers. This change is not readily observed by ATR-FTIR. Differences in the observed spectral changes for fibrinogen adsorbed to each polymer are explained by different initial binding mechanisms and post-adsorption conformational changes.     

Ordered adsorption of coagulation factor XII on negatively charged polymer surfaces probed by sum frequency generation vibrational spectroscopy

Electrostatic interactions between negatively charged polymer surfaces and factor XII (FXII), a blood coagulation factor, were investigated by sum frequency generation (SFG) vibrational spectroscopy, supplemented by several analytical techniques including attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), quartz crystal microbalance (QCM), ζ-potential measurement, and chromogenic assay. A series of sulfonated polystyrenes (sPS) with different sulfonation levels were synthesized as model surfaces with different surface charge densities. SFG spectra collected from FXII adsorbed onto PS and sPS surfaces with different surface charge densities showed remarkable differences in spectral features and especially in spectral intensity. Chromogenic assay experiments showed that highly charged sPS surfaces induced FXII autoactivation. ATR-FTIR and QCM results indicated that adsorption amounts on the PS and sPS surfaces were similar even though the surface charge densities were different. No significant conformational change was observed from FXII adsorbed onto surfaces studied. Using theoretical calculations, the possible contribution from the third-order nonlinear optical effect induced by the surface electric field was evaluated, and it was found to be unable to yield the SFG signal enhancement observed. Therefore it was concluded that the adsorbed FXII orientation and ordering were the main reasons for the remarkable SFG amide I signal increase on sPS surfaces. These investigations indicate that negatively charged surfaces facilitate or induce FXII autoactivation on the molecular level by imposing specific orientation and ordering on the adsorbed protein molecules. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

An ATR-FTIR spectroscopic study of the competitive adsorption between oxalate and malonate at the water-goethite interface

The competitive adsorption between oxalate and malonate at the water-goethite interface was studied as a function of pH and total ligand concentrations by means of quantitative adsorption measurements and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy. The results obtained show that ATR-FTIR spectroscopy resolves the individual spectroscopic features of oxalate and malonate when adsorbed simultaneously at the water-goethite interface. The characteristic peaks of all four types of predominating surface complexes existing in the single ligand systems were identified, namely one inner sphere and one outer sphere surface complex for each ligand. The quantitative adsorption data showed that oxalate partially out-competes malonate at the water-goethite interface. Evaluation of the peak area variations as a function of pH indicated that the stronger oxalate adsorption can be ascribed to the more stable inner sphere surface complex of oxalate, which in turn is related to the oxalate five-member chelate ring structure yielding a more stable complex compared to the six-member ring of malonate.     

Attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy of a single endothelial cell

Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) with the use of a slide-on germanium accessory followed by chemometric analysis allowed for providing meaningful information about the biochemical composition of a single endothelial cell. In this work, the methodology of the ATR-FTIR measurements of dried cells and dried cells immersed in water solution is presented. The contact of the cell and Ge crystal was set up manually and monitored through the integration of the amide I band. Additionally, the cell imaging in transreflection mode was tested, but the spectral differences between sub-cellular structures were not prominent in the registered spectra. It has been shown that the ATR-FTIR method gives better results due to the increased spatial resolution and S/R ratio as well as small contribution of the optical artifacts.     

Development of wood protective polyurethane coatings from mahua oil-based polyetheramide polyol: a renewable approach

The present work reports the preparation of wood protective polyurethane (PU) from mahua oil-based polyetheramide polyol and its performance evaluation. The synthesis of polyetheramide polyol was carried out in two steps: the first step deals with the synthesis of mahua oil fatty amide (MFA) from mahua oil by base catalyzed aminolysis reaction and the second step deals with the synthesis of polyetheramide polyol from diglycidyl ether of bisphenol-A (DGEBA) and MFA. The structure of the synthesized polyetheramide polyol was confirmed by the Attenuated total reflection fourier transform infrared (ATR-FTIR) and proton nuclear magnetic resonance (¹H NMR) spectroscopy. The synthesized polyetheramide polyol was used as a precursor for the wood protective PU coatings. The performance of the prepared wood protective PU coatings was evaluated by the measurements of the various performance properties. The results reveal that mechanical, thermal, and microbial properties of the prepared PUs are satisfactory compared to other literature reported vegetable oil-based PUs; whereas, water, solvent, and chemical resistance of the prepared PUs are quite good. The study concludes that mahua oil-based polyetheramide polyol is a suitable precursor for the preparation of wood protective PU.     

Characterization of genuine and fake artesunate anti-malarial tablets using Fourier transform infrared imaging and spatially offset Raman spectroscopy through blister packs

In support of the efforts to combat the illegal sale and distribution of counterfeit anti-malarial drugs, we evaluated a new analytical approach for the characterization and fast screening of fake and genuine artesunate tablets using a combination of Raman spectroscopy, Spatially Offset Raman Spectroscopy (SORS) and Attenuated Total Reflection-Fourier Transform Infrared (ATR-FTIR) imaging. Vibrational spectroscopy provided chemically specific information on the composition of the tablets; the complementary nature of Raman scattering and FTIR imaging allowed the characterization of both the overall and surface composition of the tablets. The depth-resolving power of the SORS approach provided chemically specific information on the overall composition of the tablets, non-invasively, through a variety of packaging types. Spatial imaging of the tablet surface (using ATR-FTIR) identified the location of domains of excipients and active ingredients with high sensitivity and enhanced spatial resolution. The advantages provided by a combination of SORS and ATR-FTIR imaging in this context confirm its potential for inclusion in the analytical protocol for forensic investigation of counterfeit medicines.     

ATR-FTIR investigation on the complexation of myo-inositol hexaphosphate with aluminum hydroxide

The adsorption isotherm of and the pH effect on the adsorption of myo-inositol hexaphosphate (myo-IP6) on amorphous aluminum hydroxide was investigated. It was found that the adsorption isotherm of myo-IP6 on aluminum hydroxide could be well fitted with the Freundlich isotherm. The amount of myo-IP6 adsorbed remained almost constant in the range of pH 4.0 to 7.0, but it decreased considerably as the initial pH was over 7. The adsorption of myo-IP6 resulted in an increase in the pH level due to the release of OH(-) ions, which suggested that the adsorption of myo-IP6 on aluminum hydroxide was caused by a ligand exchange reaction. ATR-FTIR analysis of myo-IP6 in solution and adsorbed on aluminum hydroxide at different pH were performed. The ATR-FTIR investigation indicated that myo-IP6 was adsorbed onto aluminum hydroxide by forming inner-sphere complexes and adsorption facilitated the deprotonation of phosphate groups. The asymmetric vibration of the PO bond in AlPO(-)(3) appearing at a lower frequency than that in the terminal HPO(-)(3) indicated that Al bound to the O atom not as strongly as the H atom did. The ATR-FTIR investigation and theoretical calculation (with the Gaussian 03 program) revealed that three of the six phosphate groups in myo-IP6 molecules were bound to aluminum hydroxide while the other three remained free when myo-IP6 was adsorbed on aluminum hydroxide.     

Investigation of the kinetics of aquation of the 1:2 complex between Cr and nitrilotriacetic acid

Aquation of the 1:2 complex between Cr^III and nitrilotriacetic acid (NTA) was monitored using a combination of capillary electrophoresis (CE), ultraviolet–visible (UV–vis) spectrophotometry, and attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy. To our knowledge, this is the first published report of the use of either CE or ATR-FTIR to monitor the kinetics of ligand exchange reactions of Cr^III–aminocarboxylate complexes. The aquation products were identified as the 1:1 Cr^III complex with NTA and “free” NTA. The 1:1 complex dimerized to form a 2:2 complex in a slower subsequent reaction step. Rates of disappearance of the 1:2 complex were first-order under all experimental conditions. First-order rate constants for aquation, k_obs (h⁻¹), measured using all three techniques were similar at equivalent pH conditions, and with values reported previously in the literature. Measured k_obs values exhibited a complicated pH dependence with three distinct regions: (i) at pH < 6.5, k_obs values increased with decreasing pH, (ii) between pH 6.5 and 8.0, k_obs values were relatively constant, and (iii) at 8.0 < pH < 10.0, k_obs increased with increasing pH and then leveled off. A kinetic model incorporating five distinct aquation pathways was successfully employed to model the pH dependence of k_obs from 0.0 < pH < 10.0. These results show that CE and ATR-FTIR can be used as tools for better understanding ligand exchange processes occurring in aqueous solution.     

Molecular macrocluster formation on silica surfaces in phenol-cyclohexane mixtures

The adsorption of phenol, an aromatic compound with a hydrogen-bonding group, onto a silica surface in cyclohexane was investigated by colloidal probe atomic force microscopy (AFM), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and adsorption isotherm measurements. ATR-FTIR measurements on the silica surface indicated the formation of surface macroclusters of phenol through hydrogen bonding. The ATR-FTIR spectra were also measured on the H-terminated silicon surface to observe the effect of the silanol groups on the phenol adsorption. The comparison of the ATR-FTIR spectra for both the silicon oxide and H-terminated silicon surfaces proved that the silanol groups are necessary for the formation of phenol clusters on the surface. The surface force measurement using colloidal probe AFM showed a long-range attraction between the two silica surfaces in phenol-cyclohexane mixtures. This long-range attraction resulted from the contact of the adsorbed phenol layers for the phenol concentrations below 0.6 mol %, at which no significant phenol clusters formed in the bulk solution. The attraction started to decrease at 0.6 mol % phenol due to the exchange of the phenol molecules between the clusters in the bulk phase and on the surface. The surface density of phenol in the adsorbed layer was calculated on the basis of the long-range attraction and found to be much smaller than the liquid phenol density. The plausible structure of the adsorbed phenol layer was drawn by referring to the crystal structure of the bulk phenol and orientation of the phenol molecules on the surface, estimated by the dichroic analysis of ATR-FTIR spectroscopy. The investigation of the phenol adsorption on the silica surface in a nonpolar solvent using this novel approach demonstrated the effect of the aromatic ring on the surface packing density.     

Quantitative determination of competitive molecular adsorption on gold nanoparticles using attenuated total reflectance-Fourier transform infrared spectroscopy

Surface-sensitive quantitative studies of competitive molecular adsorption on nanoparticles were conducted using a modified attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy method. Adsorption isotherms for thiolated poly(ethylene glycol) (SH-PEG) on gold nanoparticles (AuNPs) as a function of molecular mass (1, 5, and 20 kDa) were characterized. We find that surface density of SH-PEG on AuNPs is inversely proportional to the molecular mass (M(m)). Equilibrium binding constants for SH-PEG, obtained using the Langmuir adsorption model, show the binding affinity for SH-PEG is proportional to M(m). Simultaneous competitive adsorption between mercaptopropionic acid (MPA) and 5 kDa SH-PEG (SH-PEG5K) was investigated, and we find that MPA concentration is the dominant factor influencing the surface density of both SH-PEG5K and MPA, whereas the concentration of SH-PEG5K affects only SH-PEG5K surface density. Electrospray differential mobility analysis (ES-DMA) was employed as an orthogonal characterization technique. ES-DMA results are consistent with the results obtained by ATR-FTIR, confirming our conclusions about the adsorption process in this system. Ligand displacement competitive adsorption, where the displacing molecular species is added after completion of the ligand surface binding, was also interrogated by ATR-FTIR. Results indicate that for SH-PEG increasing M(m) yields greater stability on AuNPs when measured against displacement by bovine serum albumin (BSA) as a model serum protein. In addition, the binding affinity of BSA to AuNPs is inhibited for SH-PEG conjugated AuNPs, an effect that is enhanced at higher SH-PEG M(m) values.     

Fluorinated olefinic peptide nucleic acid: synthesis and pairing properties with complementary DNA

The fluorinated olefinic peptide nucleic acid (F-OPA) system was designed as a peptide nucleic acid (PNA) analogue in which the base carrying amide moiety was replaced by an isostructural and isoelectrostatic fluorinated C-C double bond, locking the nucleobases in one of the two possible rotameric forms. By comparison of the base-pairing properties of this analogue with its nonfluorinated analogue OPA and PNA, we aimed at a closer understanding of the role of this amide function in complementary DNA recognition. Here we present the synthesis of the F-OPA monomer building blocks containing the nucleobases A, T, and G according to the MMTr/Acyl protecting group scheme. Key steps are a selective desymmetrization of the double bond in the monomer precursor via lactonization as well as a highly regioselective Mitsunobu reaction for the introduction of the bases. PNA decamers containing single F-OPA mutations and fully modified F-OPA decamers and pentadecamers containing the bases A and T were synthesized by solid-phase peptide chemistry, and their hybridization properties with complementary parallel and antiparallel DNA were assessed by UV melting curves and CD spectroscopic methods. The stability of the duplexes formed by the decamers containing single (Z)-F-OPA modifications with parallel and antiparallel DNA was found to be strongly dependent on their position in the sequence with T(m) values ranging from +2.4 to -8.1 degrees C/modification as compared to PNA. Fully modified F-OPA decamers and pentadecamers were found to form parallel duplexes with complementary DNA with reduced stability compared to PNA or OPA. An asymmetric F-OPA pentadecamer was found to form a stable self-complex (T(m) approximately 65 degrees C) of unknown structure. The generally reduced affinity to DNA may therefore be due to an increased propensity for self-aggregation.     

Reversible Immobilization of Peptides: Surface Modification and In Situ Detection by Attenuated Total Reflection FTIR Spectroscopy

A generic method is described for the reversible immobilization of polyhistidine‐bearing polypeptides and proteins on attenuated total reflecting (ATR) sensor surfaces for the detection of biomolecular interactions by FTIR spectroscopy. Nitrilotriacetic acid (NTA) groups are covalently attached to self‐assembled monolayers of either thioalkanes on gold films or mercaptosilanes on silicon dioxide films deposited on germanium internal reflection elements. Complex formation between Ni²⁺ ions and NTA groups activates the ATR sensor surface for the selective binding of polyhistidine sequences. This approach not only allows a stable and reversible immobilization of histidine‐tagged peptides (His–peptides) but also simultaneously allows the direct in situ quantification of surface‐adsorbed molecules from their specific FTIR spectral bands. The surface concentrations of both NTA and His–peptide on silanized surfaces were determined to be 1.1 and 0.4 molecules nm^?2, respectively, which means that the surface is densely covered. A comparison of experimental FTIR spectra with simulated spectra reveals a surface‐enhancement effect of one order of magnitude for the gold surfaces. With the presented sensor surfaces, new ways are opened up to investigate, in situ and with high sensitivity and reproducibility, protein–ligand, protein–protein, protein–DNA interactions, and DNA hybridization by ATR–FTIR spectroscopy.     

Plasma-induced graft-polymerization of polyethylene glycol acrylate on polypropylene films: Chemical characterization and evaluation of the protein adsorption

This work deals with the optimization of argon plasma-induced graft-polymerization of polyethylene glycol acrylate (PEGA) on polypropylene (PP) films in order to obtain surfaces with a reduced protein adsorption for possible biomedical applications. To this end, we examined the protein adsorption on the treated and untreated surfaces. The graft-polymerization process consisted of four steps: (a) plasma pre-activation of the PP substrates; (b) immersion in a PEGA solution; (c) argon plasma-induced graft-polymerization; (d) washing and drying of the samples. The efficiency of these processes was evaluated in terms of the amount of grafted polymer, coverage uniformity and substrates wettability. The process was monitored by contact angle measurements, attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), X-ray Photoelectron Spectroscopy (XPS) and atomic force microscopy (AFM) analyses. The stability of the obtained thin films was evaluated in water and in Phosphate Buffer Saline (PBS) at 37 °C. The adsorption of fibrinogen and green fluorescent protein (GFP) – taken as model proteins – on the differently prepared surfaces was evaluated through a fluorescence approach using laser scanning confocal microscopy with photon counting detection. After plasma treatments of short duration, the protein adsorption decreases by about 60–70% with respect to that of the untreated film, while long plasma exposure resulted in a higher protein adsorption, due to damaging of the grafted polymer.     

RGD改性聚醚氨酯及其内皮细胞相容性的研究

利用氢键稳定的溶液互穿技术对聚醚氨酯(PEU)进行改性.用ATR-FTIR对十八烷基-聚氧乙烯-4,4'-二苯甲烷二异氰酸酯-聚氧乙烯-十八烷基(MSPEO)与PEU共混膜表面进行研究,结果表明,MS-PEO中的氨基甲酸酯链段与PEU基材之间发生了氢键缔合的作用.通过水化处理PEO及十八烷基自发地富集在基材表面.根据氢键缔合和表面自迁移原理,设计了两种RGD改性聚醚氨酯的方法:(1)将含RGD端基的聚氧乙烯-4,4'-二苯甲烷二异氰酸酯-聚氧乙烯偶联物(MPEO-RGD)与PEU进行共混改性,利用RGD端基及PEO的自迁移特性获得RGD富集的表面;(2)将含甲磺酸酯端基的聚氧乙烯-4,4'-二苯甲烷二异氰酸酯-聚氧乙烯偶联物(MPEO-mesyl)与PEU共混成膜,并对膜片进行水化处理,使甲磺酸酯端基富集在PEU表面,浸泡于RGD的PBS溶液中,在膜片表面成功地原位接枝了RGD.对两种RGD改性方法获得的表面进行了内皮细胞的培养,结果表明,两种改性方法均大大提高了PEU的细胞相容性,其中方法(1)共混改性的表面细胞相容性略优于方法(2)的接枝改性表面.     

Protein-peptide affinity determination using an H/D exchange dilution strategy: Application to antigen-antibody interactions

A new methodology using hydrogen/deuterium amide exchange (HDX) to determine the binding affinity of protein-peptide interactions is reported. The method, based on our previously established approach, protein ligand interaction by mass spectrometry, titration, and H/D exchange (PLIMSTEX) [J. Am. Chem. Soc. 2003, 125, 5252–5253], makes use of a dilution strategy (dPLIMSTEX) for HDX, using the mass of the peptide ligand as readout. We employed dPLIMSTEX to study the interaction of calcium-saturated calmodulin with the opioid peptide β-endorphin as a model system; the affinity results are in good agreement with those from traditional PLIMSTEX and with literature values obtained by using other methods. We show that the dPLIMSTEX method is feasible to quantify an antigen-antibody interaction involving a 3-nitrotyrosine modified peptide in complex with a monoclonal anti-nitrotyrosine antibody. A dissociation constant in the low nanomolar range was determined, and a binding stoichiometry of antibody/peptide of 1:2 was confirmed. In addition, we determined that the epitope in the binding interface contains a minimum of five amino acids. The dPLIMSTEX approach is a sensitive and powerful tool for the quantitative determination of peptide affinities with antibodies, complementary to conventional immuno-analytical techniques.     

Adsorption behavior of human serum albumin on ATR crystal studied by in situ ATR/FTIR spectroscopy and two-dimensional correlation analysis

The time-dependent adsorption behavior of human serum albumin (HSA) onto an ATR (ZnSe) crystal was investigated by two-dimensional (2D) correlation analysis and in situ ATR-FTIR spectroscopy following the secondary structural changes in the amide I region. The two major advantages of the generalized 2D correlation spectroscopy were first tested. New extra bands have been resolved by 2D correlation analysis, but they are either artifacts or a result of uncertainty on band position in generalized 2D correlation spectroscopy. The sequence of the intensity variations of the three sub-bands under the amide I band profile deduced from the 'sequential order' rules is contradictory to the experimental observation, which supports our argument on the 'sequential order' rules in generalized 2D correlation spectroscopy (H. Huang, Anal. Chem., 2007, 79, 8281-8292). Subsequent detailed analysis on the in situ ATR-IR spectra shows that the adsorption process of HSA on the ATR (ZnSe) crystal in aqueous solutions can be divided into three stages: no obvious conformational transitions in the first 25 min of adsorption of HSA molecules; large structural rearrangement from α-helix to random coil and short extended chain structures in a fully cooperative way from 25 to 50 min of adsorption; and further slight conformational transformation of short extended chain and turn structures into random coil with no sequential order after 50 min of adsorption.     

Characterization of a peptide affinity support that binds selectively to staphylococcal enterotoxin B

The influences of mass transfer and adsorption-desorption kinetics on the binding of staphylococcal enterotoxin B (SEB) to an affinity resin with the peptide ligand, Tyr-Tyr-Trp-Leu-His-His (YYWLHH) have been studied. The bed and particle porosities, the axial dispersion coefficient and the pore diffusivity were measured using pulse experiments under unretained conditions. Adsorption isotherms for SEB on YYWLHH resins with peptide densities in the range from 6 to 220 micromol/g were measured and fitted to a bi-Langmuir equation. At peptide densities below 9 micromol/g and above 50 micromol/g, dissociation constants were lower (2 x 10(-3) to 7 x 10(-3) mol/m3), and binding capacities were larger (43-47 mg SEB/g). In the range from 9 to 50 micromol/g dissociation constants were larger (13 x 10(-3) to 24 x 10(-3) mol/m3) and capacities were lower (33-37 mg SEB/g). These observations are consistent with a transition from single point attachment of the protein to the ligand at low peptide densities to multipoint attachment at high peptide densities. The general rate (GR) model of chromatography was used to fit experimental breakthrough curves under retained conditions to determine the intrinsic rate constants for adsorption, which varied from 0.13 to 0.50 m3 mol(-1) s(-1), and exhibited no clear trend with increasing peptide density. An analysis of the number of transfer units for the various mass transfer steps in the column indicated that film mass transfer, pore diffusion (POR) and the kinetics of adsorption can all play an important role in the overall rate of adsorption, with the intrinsic adsorption step apparently being the rate determining step at peptide densities below 50 micromol/g.     

氨三乙酸稀土络合物配体交换反应的NMR研究

利用变温＾１３Ｃ，＾１Ｈ－ＮＭＲ研究了过量配体存在下，氨三乙酸稀土络合物Ｌｎ（ＮＴＡ）２（Ｌｎ＝Ｃｅ，Ｐｒ和Ｎｄ）配体交换反应。在中必不溶液中，分子间的配体交换过程按中下机制进行：Ｌｎ（ＮＴＡ）２＾３－＋ＨＮＴＡ＾２－＝Ｌｎ（ＮＴＡ）（ＮＴＡ）＾３＋＋ＮＨＴＡ＾２－由溶液中溶液中自由ＮＴＡ信号线宽分析了交换速率、确定了反应的活化能。结果表明，分子间配体交换反应化能与相应稀土络合物热力学稳定性有一定