Glass capillary gas chromatography of C1−C4 mononitroalkanes. Pre-calculation of the relative retention

Summary The separation of C₁–C₄ mononitroalkanes on four wall-coated glass open tubular (capillary) columns (liquid phases: OV-101, Ucon-LB-550X, NPGS and Carbowax 20M) was investigated. Retention indices were determined and the influence of the different factors (analysis temperature, method of determining the gas holdup time and the nature of the stationary phases) on their reproducibility were studied. Linear regression equations permit the pre-calculation of the retention indices of C₁–C₄ mononitroalkanes from their properties on all liquid phases studied.     

Comparison of a C30 Bonded Silica Column and Columns with Shorter Bonded Ligands in Reversed-Phase LC

The Carotenoid S is a new C₃₀ bonded silica stationary phase, intended for reversed-phase chromatographic applications, which is more hydrophobic and consequently shows stronger retention in comparison to conventionally used C₁₈ stationary phases. We compared the non-polar selectivities of the columns for homologous alkylbenzenes in acetonitrile—water and methanol–water mobile phases and polar reversed-phase selectivities employing the interaction indices and the Linear Free Energy Relationship models. Further, we investigated possibilities of separations of structurally closely related compounds in the groups of phenolic acids, flavones, phthalic acids and related compounds and of acylglycerols on the new C₃₀ column and with different types of columns for reversed-phase chromatography, including shorter alkyl C₄, C₈, C₁₈ and phenyl bonded stationary phases. The C₃₀ column has in some aspects properties similar to the non-endcapped Nova-Pak column for separation of some acylglycerols with equal equivalent carbon numbers, but enables separations of longer chain triacylglycerols in a single gradient run.

     

Factors affecting the reversed-phase liquid chromatographic separation of polycyclic aromatic hydrocarbon isomers

Reversed-phase liquid chromatography (LC) on C₁₈ stationary phases provides excellent selectivity for the separation of polycyclic aromatic hydrocarbons (PAH). Recent studies have shown that several factors affect selectivity for the LC separation of PAH including phase type (monomeric or polymeric), pore diameter and surface area of the silica substrate, and surface density of the C₁₈ ligands. In this paper the separation of eleven PAH isomers of molecular weight 278 is used to further illustrate the effect of stationary phase characteristics and shape of the solute (length-to-breadth ratio, L/B) on retention and selectivity. Only polymeric C₁₈ phases with a high C₁₈ surface coverage provided separation of all eleven isomers and the elution order of these isomers generally followed increasing L/B values. The effect of solute nonplanarity on reversed-phase LC retention was investigated on both monomeric and polymeric phases using a series of planar and nonplanar PAH pairs. For each solute pair, the nonplanar solute eluted earlier than the planar solute, the largest selectivity factors being observed on the C₁₈ phase with the highest percent carbon load. Based on these studies, a model is proposed to describe the retention of PAH on polymeric C₁₈ phases.     

New Fullerene-Based Stationary Phases for Gas Chromatography

Regularities were revealed for the retention of different classes of organic compounds on stationary phases based on C₆₀ and carbon nanotubes and on phases of mixed composition (C₆₀ and dibenzo-24-crown-8, C₆₀ and dibenzo-30-crown-10, and C₆₀ and -cyclodextrin) in gas chromatography. A synergistic effect was observed for the stationary phases of mixed composition. Quantitative estimation of the dispersion potential demonstrated that the C₆₀-based stationary phase differs significantly from hydrocarbon adsorbents and more closely resembles nonpolar liquid stationary phases. Under the conditions of solid-phase microextraction, an adsorbing element based on fullerene C₆₀ can be used for the preconcentration of aromatic hydrocarbons.     

Separation of Dietary Folates by Gradient Reversed-Phase HPLC: Comparison of Alternative and Conventional Silica-Based Stationary Phases

A study of ten silica-based stationary phases and gradient elution conditions to separate dietary folates by reversed-phase HPLC was performed. Alkyl-bonded stationary phases (both conventional and alternative) were found to be the most promising for the separation of different folate monoglutamates in terms of selectivity and peak shape. These phases were better than phenyl-bonded phases which lacked selectivity when separating 10-formyl-folic acid and 5-formyl-tetrahydrofolate. Polar-bonded (cyano) stationary phase showed similar retention characteristics as the conventional alkyl-bonded phases, but ranked below those in terms of peak shape. Overall, alternative stationary phases exhibited slightly higher retention of late-eluted folates and greater retention variability for early-eluting tetrahydrofolate and 5-methyl-tetrahydrofolate. Best selectivity was achieved on alternative polar endcapped Aquasil C₁₈ followed by conventional Synergy MAX C₁₂ and Genesis C₁₈ stationary phases.     

Separation of polycyclic aromatic hydrocarbons with a C60 bonded silica phase in microcolumn liquid chromatography

A chemically bonded C₆₀ silica phase was synthesized as a stationary phase for liquid chromatography (LC) and its retention behavior evaluated for various polycyclic aromatic hydrocarbons (PAHs) using microcolumn LC. The results indicate that the C₆₀ bonded phase offers selectivity different from that of octadecylsilica (ODS) bonded phases in the separation of isomeric PAHs. With the C₆₀ phase, PAH molecules having a partial structure similar to that of the C₆₀ molecule, e.g. triphenylene and perylene, were retained longer than with ordinary ODS stationary phases. The results also show that good correlation exists between the retention data with this C₆₀ bonded phase and with C₆₀ itself as the stationary phase.     

Chromatographic Behaviour and Lipophilicity of Estradiol Derivatives

The retention behaviour of estradiol derivatives has been studied by HPLC on polar chemically bonded stationary phases: C₃CN, DIOL and C₃NH₂, commercially available columns. The mobile phases used were: methanol-water and acetonitrile-water in various proportions. Reversed-phase chromatography occurred on polar chemically bonded stationary phases. Correlation between the retention constants of estradiol derivatives obtained on polar chemically bonded phases and log P calculated via different methods was examined too.     

Synthesis and characterization of novel polar-embedded silica stationary phases for use in reversed-phase high-performance liquid chromatography

We have developed a series of new C₁₀ dipeptide stationary phases via a simple and effective synthetic method. The preparation of the new phases involves the synthesis of silanes and the surface modification of silica. Chromatographic evaluations of these columns were performed using the Engelhardt, Tanaka, and Neue test mixtures. The applicability of these new stationary phases was also evaluated using a series of diagnostic probes including acids, bases or neutral compounds and several generic applications. These new C₁₀ dipeptide stationary phases showed excellent hydrolytic stability over a wide pH range. Like other existing amide-embedded columns, these new stationary phases exhibit higher retention for polar and hydrophilic compounds and different selectivity as compared to conventional C₁₈ columns. These new phases are compatible with 100% aqueous mobile phases, and also provide high column efficiency and good peak shapes for both acidic and basic compounds.     

Comparison of the Separation Characteristics of the Organic–Inorganic Hybrid Octadecyl Stationary Phases XTerra MS C18 and XBridge C18 and Shield RP18 in RPLC

Differences in the system constants of the solvation parameter model, discontinuities in retention factor plots (log k against volume fraction of organic solvent) and retention factor correlation plots are used to study the retention mechanism on XTerra MS C₁₈, XBridge C₁₈ and XBridge Shield RP₁₈ stationary phases with acetonitrile–water and methanol–water mobile phases containing from 10 to 70% (v/v) organic solvent. Wetting of XBridge C₁₈ at 10 and 20% (v/v) acetonitrile is incomplete and is responsible for small changes in the retention mechanism. The intermolecular interactions responsible for retention on XTerra MS C₁₈ and XBridge C₁₈ are similar with minor differences in cavity formation and hydrogen-bonding interactions responsible for small selectivity differences. On the other hand, for bulky solutes there are large changes in retention at low volume fractions of organic solvent (<40% v/v) associated with steric repulsion on the XTerra MS C₁₈ stationary phases that is absent for XBridge C₁₈. Selectivity differences are more apparent for XBridge C₁₈ and XBridge Shield RP₁₈. For acetonitrile-water mobile phases cavity formation in the solvated XBridge Shield RP₁₈ is slightly more difficult and hydrogen-bond acid and base interactions are more important than for XBridge C₁₈. With methanol–water mobile phases it becomes slightly easier to form a cavity in the solvated XBridge RP₁₈ compared with XBridge C₁₈. In addition, the methanol-water solvated XBridge RP₁₈ is a stronger hydrogen-bond base and more dipolar/polarizable than XBridge C₁₈. These variations in selectivity justify the use of XBridge C₁₈ and XBridge Shield RP₁₈ as complementary stationary phases for method development.     

Comparison of the Separation Characteristics of the Organic–Inorganic Hybrid Stationary Phases XBridge C8 and Phenyl and XTerra Phenyl in RP-LC

Differences in the system constants of the solvation parameter model and retention factor correlation plots for varied solutes are used to study the retention mechanism on XBridge C₈, XBridge Phenyl and XTerra Phenyl stationary phases with acetonitrile–water and methanol–water mobile phases containing from 10 to 70% (v/v) organic solvent. These stationary phases are compared with XBridge C₁₈ and XBridge Shield RP₁₈ characterized in an earlier report using the same protocol. The XBridge stationary phases are all quite similar in their retention properties with larger difference in absolute retention explained by differences in cohesion and the phase ratio, mainly, and smaller changes in relative retention (selectivity) by the differences in individual system constants and their variation with mobile phase type and composition. None of the XBridge stationary phases are selectivity equivalent but XBridge C₁₈ and XBridge Shield RP₁₈ have similar separation properties, likewise so do XBridge C₈ and XBridge Phenyl, while the differences between the two groups of two stationary phases is greater than the difference within either group. The limited range of changes in selectivity is demonstrated by the high coefficient of determination (>0.98) for plots of the retention factors for varied compounds on the different XBridge phases with the same mobile phase composition.     

Preparation of pyrenebutyric acid-modified magnesia-zirconia stationary phases using phosphonate as spacers and their application to the separation of fullerenes

A novel method was proposed for the preparation of pyrenebutyric acid-modified magnesia-zirconia stationary phases. Pyrenebutyric acid was grafted to magnesia-zirconia composites with different pore sizes via the sodium salt of cis-(3-methyloxiranyl)phosphonic acid (fosfomycin) as spacers. Aminated fosfomycin was first absorbed onto the surface of magnesia-zirconia composites during the preliminary step to provide amino and hydroxy reactive sites. And then the pyrenebutyric acid was covalently attached to the amine or hydroxyl groups via amide or ester bonds. The resulting stationary phases were characterized by elemental analysis, diffused reflectance FT-IR, nitrogen adsorption analysis and ¹³C solid state NMR spectra. The HPLC separation of fullerenes on the new stationary phases with different pore sizes was also investigated. The chromatographic performance showed a dependence on the pore size of the magnesia-zirconia matrix. Little retention of fullerenes was observed on the stationary phase with pore sizes about 4.5 nm. However, on the modified magnesia-zirconia with pore sizes about 10 nm, selectivity factors (α) for C₇₀/C₆₀ separation were determined to be 1.76, 2.29, 2.41, 3.10, with carbon disulfide, chlorobenzene, xylene and toluene as mobile phases, respectively. And the high solubility of fullerenes in these solvents dramatically increased the overall potential with regard to preparative fullerene purification. Among the reported stationary phases with pyrene ligands, the pyrenebutyric acid-modified magnesia-zirconia (PYB-F-(ZrO₂-MgO)) with larger pore sizes exhibited the best selectivity for fullerenes. The thermodynamic and kinetic behavior of fullerenes was also examined.     

Selectivity studies on branched and linear alkyl bonded stationary phases in reversed-phase liquid chromatography

Summary Reversed-phase liquid chromatographic retention characteristics for the sixteen acyclic C₁−C₅ N-alkylbenzamide congeners were measured on various branched and linear, alkyl bonded hydrocarbon stationary phases. Retention factors, k′, were determined in acetonitrile-water mobile phase compositions on ethyl, n-octyl, n-dodecyl, n-octadecyl, 1-ethyladamantyl, 4-butyloctyl, and 2,4,4-trimethylpentyl stationary phases. Statistical analysis of the two main effects investigated — type of stationary phase and percentage of organic modifier (acetonitrile) in the mobile phase — described greater than ninety percent of the variability in the data for most of the comparisons. Selectivity effects due to variation in the mobile phase dominated the results.     

Reversed-phase liquid chromatography and argentation chromatography of the minor capsaicinoids

An investigation of the liquid chromatography of the minor capsaicinoids in a commercial capsaicinoid mixture is reported. Twelve stationary phases including C₈, C₁₈, C₃₀, phenyl, and cation-exchange chemistries were examined in combination with isocratic aqueous methanol and aqueous acetonitrile mobile phases. A phenyl stationary phase and aqueous acetonitrile mobile phase baseline-resolved 7 of 11 capsaicinoids, and selected ion chromatograms (LC–ESI-MS) demonstrated this was the most effective reversed-phase separation. Argentation chromatography with an alkyl or phenyl column and aqueous silver nitrate–methanol mobile phase revealed the presence of the 6-ene-8-methyl and 6-ene-9-methyl homocapsaicin isomers and the absence of 7-ene-9-methyl homocapsaicin. A mixed phenyl–cation-exchange stationary phase (charged with silver ion) enabled unique and useful separations of the capsaicinoids.     

Capillary gas chromatography of C1−C4 alkyl tert-butyl ethers

Summary The separation of C₁–C₄ alkyl tert-butyl ethers with the general formula (CH₃)₃C–O–R (R-alkyl substituent) on fused-silica capillary columns coated with dimethylsilicone and cyanopropylmethylsilicone stationary phases was investigated. Retention indices were determined at two temperatures in order to understand their chromatographic behaviour. The respective standard deviations were 0.3 and 0.5 i.u.     

Liquid chromatographic behavior of two alanine‐substituted calix[4]arene‐bonded silica gel stationary phases

Two new kinds of alanine‐substituted calix[4]arene stationary phases of 5,11,17,23‐p‐tert‐butyl‐25,27‐bis(l ‐alanine‐methylester‐N‐carbonyl‐methoxy)‐26,28‐dihyroxycalix[4]arene‐bonded silica gel stationary phase (BABS4) and 5, 11, 17, 23‐p‐tert‐butyl‐25,26,27,28‐tetra(l ‐alanine‐methylester‐N‐carbonyl‐methoxy)‐calix[4]arene‐bonded silica gel stationary phase (TABS4) were prepared and characterized in the present study. They were compared with each other and investigated in terms of their chromatographic performance by using polycyclic aromatic hydrocarbons, disubstituted benzene isomers, and mono‐substituted benzenes as solute probes. The results indicated that both BABS4 and TABS4 exhibited multiple interactions with analytes. In addition, the commonly used Tanaka characterization protocol for the evaluation of commercially available stationary phases was applied to evaluate the properties of these two new functionalized calixarene stationary phases. The Tanaka test results were compared with Zorbax Eclipse XDB C₁₈ and Kromasil phenyl columns, respectively. BABS4 has stronger hydrogen‐bonding capacity and ion‐exchange capacity than TABS4, and features weaker hydrophobicity and hydrophobic selectivity. Both of them behave similarly in stereoselectivity. Both BABS4 and TABS4 are weaker than C₁₈ and phenyl stationary phases in hydrophobicity and hydrophobic selectivity.     

New Fluorous Reversed Phase Silica Gels for HPLC Separations of Perfluorinated Compounds

Two new perfluoroalkyl-modified stationary phases were prepared and compared with two commercially available perfluorinated stationary phases (Fluophase RP and Fluophase Pentafluorophenyl) and a C₁₈-RP column with respect to retention times of an array of perfluoroalkyl-tagged and untagged molecules. A few highly lipophilic compounds were also included in the study. They showed high retention times on C₁₈-RP columns, but not on perfluorinated support materials. Perfluoroalkyl-tagged compounds revealed a weak interaction with the pentafluorophenyl-modified support. The interaction between perfluoroalkyl-tagged compounds and perfluoroalkyl-modified stationary phases was strong, and dependent on the chain length of the perfluoro tags. Surprisingly, there was only a small difference between the retention times of perfluorinated compounds on C₁₈-RP and C₆F₁₃-modified support. Fluorous-fluorous interactions became prevalent only with C₈F₁₇-tagged compounds on C₈F₁₇ functionalized silica gel. Compounds with two perfluoro tags showed a drastic increase in retention time, which might be due to a cooperative effect. These results demonstrate the uniqueness of fluorous-fluorous interactions based on linear perfluoroalkyl chains and open up possibilities for the design of new perfluoro tags for purifications and noncovalent attachments of catalysts or biomolecules on perfluorinated solid supports.     

A novel C2 symmetric chiral stationary phase with N‐[(4‐Methylphenyl)sulfonyl]‐l‐leucine as chiral side chains

In this study, a series of chiral stationary phases based on N‐[(4‐methylphenyl)sulfonyl]‐l ‐leucine amide, whose enantiorecognition property has never been studied, were synthesized. Their enantioseparation abilities were chromatographically evaluated by 67 enantiomers. The chiral stationary phase derived from N‐[(4‐methylphenyl)sulfonyl]‐l ‐leucine showed much better enantioselectivities than that based on N‐(4‐methylbenzoyl)‐l ‐leucine amide. The construction of C₂ symmetric chiral structure greatly improved the enantiorecognition performance of the stationary phase. The C₂ symmetric chiral stationary phase exhibited superior enantioresolutions to other chiral stationary phases for most of the chiral analytes, especially for the chiral analytes with C₂ symmetric structures. By comparing the enantioseparations of the enantiomers with similar structures, the importance of hydrogen bond interaction, π–π interaction, and steric hindrance on enantiorecognition was elucidated. The enantiorecognition mechanism of trans‐N,N′‐(1,2‐diphenyl‐1,2‐ethanediyl)bis‐acetamide, which had an excellent separation factor on the C₂ symmetric chiral stationary phase, was investigated by ¹H‐NMR spectroscopy and 2D ¹H‐¹H nuclear overhauser enhancement spectroscopy.     

Evaluation of Alkyl Bonded Silica and Solvent Phase Modifiers for the Efficient Elution of Basic Drugs on HPLC

Abstract

Nine representative drugs were used to evaluate the effects of alkyl bonded stationary phases containing type A and type B silica and the effects of an amine modifier on the efficiency of high performance liquid chromatographic elution of basic and acidic drugs. The theoretical plate count and asymmetry factor of the eluted peaks were compared to that of acetophenone as a reference to the maximal efficiency of each system evaluated. Zorbax^R C₈ was used as the stationary phase prepared from type A silica and Zorbax RX^R was used as the stationary phase prepared from the type B silica. The theoretical plate count and asymmetry factor of acetophenone was observed to be the same on both columns when analyzed in an acidic aqueous/acetonitrile mobile phase. An improvement in the efficiency and peak shape of the amine containing compounds was observed using the Zorbax RX^R stationary phase as compared to the efficiency and peak shape of these compounds on the Zorbax^R C₈ stationary phase. Interestingly, the acidic compounds salicylic acid and mefenamic acid showed better peak shapes on the Zorbax RX^R column than on the Zorbax C₈. For all drugs studied the theoretical plate count and asymmetry factor was better on both the Zorbax^R C₈ and the Zorbax RX^R stationary phases when the amine modifier triethylamine was used in the mobile phase. Except for salicylic acid, the theoretical plate count and asymmetry factor for each drug was similar on the Zorbax^R C₈ and the Zorbax RX^R columns when the amine modifier     

γ(δ)-Thionolactones – Enantioselective Capillary GC and Sensory Characteristics of Enantiomers

The even numbered γ(δ)-thionolactones (C₆–C₁₂) were investigated, using heptakis(2,3-di-O-methyl-6-O-tert-butyldimethylsilyl)- and heptakis(2,3-di-O-acetyl-6-O-tert-butyldimethylsilyl)-β-cyclodextrin as chiral stationary phases in capillary gas chromatography. The odor characteristics of γ(δ)-thionolactone enantiomers were investigated by enantioselective gas chromatography/olfactometry.     

Retention parameters of aromatic hydrocarbons with mono-substituted polar groups in binary RP-HPLC systems

Summary Capacity factor (k′) values of aromatic hydrocarbons with mono-substituted polar-groups are correlated for reversed-phase systems involving stationary phases with C₁₈ or C₄ ligands chemically bonded to silica and a binary aqueous eluent containing modifiers: methanol, acetonitrile, tetrahydrofuran, isopropanol, dioxane or dimethoxyethane. The relative retention variations of the solutes are interpreted with special consideration of their interactions with non-polar stationary phases and the molecular structure of the modifiers and solutes. Rules for retention and selectivity optimisation in RP-HPLC systems are given.